Titanium Bolts

ASTM F468 Ti Flange Bolts, Torx Screws and Titanium Hex Bolts manufacturer in India.

Titanium Fasteners produced in our factory are from either alloy grades or commercially pure grades i.e. grade 1 or grade 2. Both grade 1 & grade 2 metric titanium fasteners are not alloyed and contains about 99% titanium. Further both these grades  titanium nuts are considered to be a workhorse in the fastener industry.

Ideally speaking, fasteners such as titanium cap screws are able to offer very good resistance to  corrosion, especially in environments which contain a lot of salt water and brine. Hence, these titanium nuts are used in marine environments as well as in it is used in desalination plants. In addition to that, the black titanium bolts tend to also be extremely resistant to other chemicals including compounds which contain chlorides as well as acid solutions and reducing acids.

Titanium Fasteners Manufacturer In India

Titanium Fasteners Manufacturer In India

M8 Titanium Bolts

M8 Titanium Bolts

Grade 5 Titanium Flange Nuts

Grade 5 Titanium Flange Nuts

UNS R50400 Socket Head Cap Screws

UNS R50400 Socket Head Cap Screws

Werkstoff Nr. 3.7035 Threaded Rod

Werkstoff Nr. 3.7035 Threaded Rod

Ti Countersunk Washers

Ti Countersunk Washers


What Use Of Titanium Nuts And Bolts In Seawater?

Power plant condensers use Titanium Nuts and Bolts because of their resistance to corrosion. Because titanium hex bolts has excellent resistance to corrosion in seawater, titanium hex head bolts are used in desalination plants and to protect the hulls of ships, submarines and other structures exposed to seawater.


What Is Titanium Screws?

Titanium Screws connects well with bone, so it has found surgical applications such as in joint replacements (especially hip joints) and tooth implants.

Titanium Studs For Use?

Titanium Studs are bright white pigment with excellent covering power. It is also a good reflector of infrared radiation and so is used in solar observatories where heat causes poor visibility.

Titanium Hex Bolts Light In Combination?

The fact that the titanium hex bolts are also very light in combination with the metal’s density being low, also makes titanium ideal for use in those instances where weight of the component has to be minimized. In comparison to austenitic grade 316 stainless steel, grade 5 titanium fasteners tends to be almost 4 times stronger at nearly half the weight. Thus, through reduction of weight, titanium based fasteners, can proved to be a some-what cost efficient solution, to those applications which they are required in.


Searching Titanium Fasteners manufacturer in India for specific size? Exporter of Ti Alloy Threaded Rod, Studs and Self Tapping Screws in Mumbai.


Mettec Titanium Fasteners Specification List

Specifications Of Titanium Fasteners
Head Style Slotted, Six-Lobe, Phillips, Phillips/Slot etc
Surface Coating Hot Dipped Galvanizing Coated Bolts
Phosphate Coated Bolts
Zinc Coated Bolts
Cadmium Coated Bolts
Teflon Coated Bolts
Xylon Coated Bolts
Type Of Fasteners Hex Bolts, Hex Nuts, Screws, Stubs, Threaded Rod, Washer
Standard Sizes Of Bolts M5, M12, M3, M14, M10, M4, M24, M16, M36, M30, M2, M20, M8, M6, M2.5 to M160
Length Sizes 3 millimeter to 200 millimeter
Head Type Hex, Threading, Square, Round
Threads Of Fasteners UNF UNC, BSW, METRIC, BSF
Standard ASME B18.2.2
ASME B16.5
ASME B18.5
ANSI B 18.2.4 2M
DIN = DIN 931, DIN 933, DIN 934, DIN 970
ISO = ISO 4033, ISO 4032, JIS
UTS = UNF, NPTF, NPT, UNC, UNEF, UNS
Titanium Bolts Price
Type Of Fasteners Size Material Quantity Price In USA (Dollar)
Hex Bolts M6 x 20 Titanium Grade 2 4 $7.9
Socket Hex Bolts Cap Screws M6 Titanium Grade 2 10 $2.2
Countersunk Screws M6 x 30mm Titanium Grade 2 10 $1.9
Countersunk Screws M6 x 25 Titanium Grade 2 14 $6
Hex Head Bolts M6 x 16 Titanium Grade 2 5 $1.2
Bicycle Bolts M6 x 15 Titanium Grade 2 10 $2.29
Allen Bolts M6 X 10mm Titanium Grade 2 40 $6.00
Hex Nuts M6 x 30mm Titanium Grade 2 12 $3.00
Gasket Washer M6 x 20mm Titanium Grade 2 12 $4.20
Stub Bolts M8 x 15 Titanium Grade 2 24 $8.00
Stub Bolts M8 x 30 Titanium Grade 2 24 $11.80

Please note this is an approx Price of Titanium Fasteners in India. For final Titanium Bolts Price List Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com


Titanium flanges manufacturers in India

M8 Titanium Bolts Dimensions Chart

M8 Titanium Bolts Dimensions Chart
Nominal Size Of D Diameter Of Body Head Thickness Flats Acro Corners Acro
D (MAXIMUM) D (MINIMUM) H (MAXIMUM) H (MINIMUM) F (MAXIMUM) F (MINIMUM) C (MAXIMUM) C (MINIMUM)
m10 10.00 9.78 6.63 6.17 17.00 15.73 18.48 17.77
m12 12.00 11.73 7.76 4.24 19.00 17.73 20.78 20.03
m14 14.00 13.73 9.09 8.51 22.00 20.67 24.25 23.35
m16 16.00 15.73 10.32 9.68 24.00 23.67 27.71 26.75
m20 20.00 19.67 12.88 12.12 30.00 29.16 34.64 32.95
m24 24.00 23.67 15.44 14.56 36.00 35.00 41.57 39.55
m30 30.00 29.67 19.48 17.92 46.00 45.00 53.12 50.85
m36 36.00 35.61 23.38 21.63 55.00 53.80 63.51 60.79
m42 42.00 41.38 26.97 25.03 65.00 62.90 75.06 71.71
m48 48.00 47.38 31.07 28.93 75.00 72.60 86.60 82.76
m56 56.00 55.26 36.2 33.80 85.00 82.20 98.15 93.71
m64 64.00 63.26 41.32 38.68 95.00 91.80 109.70 104.65
m72 72.00 71.26 46.45 43.55 105.00 101.40 121.24 115.60
m80 80.00 79.26 51.58 48.42 115.00 111.00 132.72 126.54
m90 90.00 89.13 57.74 54.26 130.00 125.50 150.11 143.07
m100 90.00 99.13 63.9 60.10 145.00 140.00 167.43 159.60

Ti Hex Nuts Dimensions

Ti Hex Nuts Dimensions
Nominal Size Of Thread Diameter F G H
Across Flats
Width
Across Corners
Width
Thickness Row
Basic Maximum Minimum Maximum Minimum Basic Maximum Minimum
1/4 .2500 7/16 .438 .428 .505 .488 7/32 .226 .212
5/16 .3125 1/2 .500 .489 .577 .557 17/64 .273 .258
3/8 .3750 9/16 .562 .551 .650 .628 21/64 .337 .479
7/16 .4375 11/16 .688 .675 .794 .768 3/8 .385 .365
1/2 .5000 3/4 .750 .736 .866 .840 7/16 .448 .427
9/16 .5625 7/8 .875 .861 1.010 .982 31/64 .496 .473
5/8 .6250 15/16 .938 .922 1.083 1.051 35/64 .559 .535
3/4 .7500 1-1/8 1.125 1.088 1.299 1.240 41/64 .665 .617
7/8 .8750 1-5/16 1.312 1.269 1.516 1.447 3/4 .776 .724
1 1.0000 1-1/2 1.500 1.450 1.732 1.653 55/64 .887 .831
1-1/8 1.1250 1-11/16 1.688 1.631 1.949 1.859 31/32 .999 .939
1-3/8 1.3750 2-1/16 2.062 1.994 2.382 2.273 1-11/64 1.206 1.138
1-1/2 1.500 2-1/4 2.250 2.175 2.598 2.480 1-9/32 1.ASTM A194 GR. 8 1.245
1-5/8 1.6250 2-7/16 2.438 2.356 2.815 2.686 1-25/64 1.429 1.353
1-3/4 1.7500 2-5/8 2.625 2.538 3.031 2.893 1-1/2 1.540 1.460
2 2.0000 3 3.000 2.900 3.464 3.306 1-23/32 1.763 1.675
2-1/4 2.2500 3-3/8 3.375 3.263 3.897 3.719 1-15/16 1.986 1.890
2-1/2 2.5000 3-3/4 3.750 3.625 4.330 4.133 2-5/32 2.209 2.105
2-3/4 2.7500 4-1/8 4.125 3.988 4.763 4.546 2-3/8 2.431 2.319

M6 Titanium Stub Bolts Dimensions

Diameter Titanium Studs Bolts
Plain
UNC 8UN
1/2 19568 -
5/8 19569 -
3/4 19570
7/8 19571 -
1 19572 -
11/8 19573 13979
11/4 19574 13980
13/8 19656 13981
11/2 19657 13982
13/4 19658 13983
2 19659 13984
Available lengths 12 Inch
ASME B18.31.3,
Also available lengths Dimensions 6 Inch

Custom Titanium Fasteners Points Styles

Custom Titanium Fasteners Points Styles

Titanium Grade 2 Square Bolts Dimensions

Titanium Grade 2 Square Bolts Dimensions

Table B3
Dimensions Of Square Bolt
Size Of Bolt A (maximum) B C (minimum) D E F
Length Of Thread
for Bolt Length
maximum minimum 6 Inch and
shorter
over 6 Inch
1/4" 0.260 3/8 0.498 11/64 0.03 0.01 0.750 1.000
5/16" 0.324 1/2 0.665 13/64 0.03 0.01 0.875 1.125
3/8" 0.388 9/16 0.747 1/4 0.03 0.01 1.000 1.250
7/16" 0.452 5/8 0.828 19/64 0.03 0.01 1.125 1.375
1/2" 0.515 3/4 0.995 21/64 0.03 0.01 1.250 1.500
5/8" 0.642 15/16 1.244 27/64 0.06 0.02 1.500 1.750
3/4" 0.768 1-1/8 1.494 1/2 0.06 0.02 1.750 2.000
7/8" 0.895 1-5/16 1.742 19/32 0.06 0.02 2.000 2.250
1" 1.022 1-1/2 1.991 21/32 0.09 0.03 2.250 2.500
1-1/8" 1.149 1-11/16 2.239 3/4 0.09 0.03 2.500 2.750
1-1/4" 1.277 1-7/8 2.489 27/32 0.09 0.03 2.750 3.000
1-3/8" 1.404 2-1/16 2.738 29/32 0.09 0.03 3.000 3.250
1-1/2" 1.531 2-1/4 2.986 1 0.09 0.03 3.250 3.500

Titanium Grade 5 Heavy Hex Bolts Dimensions

Titanium Grade 5 Heavy Hex Bolts Dimensions

Nominal Size Of D Diameter Of Body Thickness Of Head Flats Across Bolts Corners Across
D (Maximum) D (Minimum) H (Maximum) H (Minimum) F (Maximum) F (Minimum) C (Maximum) C (Minimum)
m10 10.00 9.78 6.63 6.17 17.00 15.73 18.48 17.77
m12 12.00 11.73 7.76 4.24 19.00 17.73 20.78 20.03
m14 14.00 13.73 9.09 8.51 22.00 20.67 24.25 23.35
m16 16.00 15.73 10.32 9.68 24.00 23.67 27.71 26.75
m20 20.00 19.67 12.88 12.12 30.00 29.16 34.64 32.95
m24 24.00 23.67 15.44 14.56 36.00 35.00 41.57 39.55
m30 30.00 29.67 19.48 17.92 46.00 45.00 53.12 50.85
m36 36.00 35.61 23.38 21.63 55.00 53.80 63.51 60.79
m42 42.00 41.38 26.97 25.03 65.00 62.90 75.06 71.71
m48 48.00 47.38 31.07 28.93 75.00 72.60 86.60 82.76
m56 56.00 55.26 36.2 33.80 85.00 82.20 98.15 93.71
m64 64.00 63.26 41.32 38.68 95.00 91.80 109.70 104.65
m72 72.00 71.26 46.45 43.55 105.00 101.40 121.24 115.60
m80 80.00 79.26 51.58 48.42 115.00 111.00 132.72 126.54
m90 90.00 89.13 57.74 54.26 130.00 125.50 150.11 143.07
m100 90.00 99.13 63.9 60.10 145.00 140.00 167.43 159.60

UNS R50400 Heavy Hex Nuts Dimensions

UNS R50400 Heavy Hex Nuts Dimensions

Nominal Size For Thread Diameter
F
G
H
Width Of Across Flats
Width Of Across Corners
Thickness Table
Basic
Maximum
Minimum
Maximum
Minimum
Basic
Maximum
Minimum
1/4
.2500
7/16
.438
.428
.505
.488
7/32
.226
.212
5/16
.3125
1/2
.500
.489
.577
.557
17/64
.273
.258
3/8
.3750
9/16
.562
.551
.650
.628
21/64
.337
.479
7/16
.4375
11/16
.688
.675
.794
.768
3/8
.385
.365
1/2
.5000
3/4
.750
.736
.866
.840
7/16
.448
.427
9/16
.5625
7/8
.875
.861
1.010
.982
31/64
.496
.473
5/8
.6250
15/16
.938
.922
1.083
1.051
35/64
.559
.535
3/4
.7500
1-1/8
1.125
1.088
1.299
1.240
41/64
.665
.617
7/8
.8750
1-5/16
1.312
1.269
1.516
1.447
3/4
.776
.724
1
1.0000
1-1/2
1.500
1.450
1.732
1.653
55/64
.887
.831
1-1/8
1.1250
1-11/16
1.688
1.631
1.949
1.859
31/32
.999
.939
1-3/8
1.3750
2-1/16
2.062
1.994
2.382
2.273
1-11/64
1.206
1.138
1-1/2
1.500
2-1/4
2.250
2.175
2.598
2.480
1-9/32
1.ASTM A194 GR. 8
1.245
1-5/8
1.6250
2-7/16
2.438
2.356
2.815
2.686
1-25/64
1.429
1.353
1-3/4
1.7500
2-5/8
2.625
2.538
3.031
2.893
1-1/2
1.540
1.460
2
2.0000
3
3.000
2.900
3.464
3.306
1-23/32
1.763
1.675
2-1/4
2.2500
3-3/8
3.375
3.263
3.897
3.719
1-15/16
1.986
1.890
2-1/2
2.5000
3-3/4
3.750
3.625
4.330
4.133
2-5/32
2.209
2.105
2-3/4
2.7500
4-1/8
4.125
3.988
4.763
4.546
2-3/8
2.431
2.319

Werkstoff Nr. 3.7035 Socket Head Cap Screw Dimensions

Werkstoff Nr. 3.7035 Socket Head Cap Screw Dimensions

Nominal Size Of D
Diameter Of Body
Thickness Of Head
Flats Across
Bolts Corners Across
D (Maximum)
D (Minimum)
H (Maximum)
H (Minimum)
F (Maximum)
F (Minimum)
C (Maximum)
C (Minimum)
m10
10.00
9.78
6.63
6.17
17.00
15.73
18.48
17.77
m12
12.00
11.73
7.76
4.24
19.00
17.73
20.78
20.03
m14
14.00
13.73
9.09
8.51
22.00
20.67
24.25
23.35
m16
16.00
15.73
10.32
9.68
24.00
23.67
27.71
26.75
m20
20.00
19.67
12.88
12.12
30.00
29.16
34.64
32.95
m24
24.00
23.67
15.44
14.56
36.00
35.00
41.57
39.55
m30
30.00
29.67
19.48
17.92
46.00
45.00
53.12
50.85
m36
36.00
35.61
23.38
21.63
55.00
53.80
63.51
60.79
m42
42.00
41.38
26.97
25.03
65.00
62.90
75.06
71.71
m48
48.00
47.38
31.07
28.93
75.00
72.60
86.60
82.76
m56
56.00
55.26
36.2
33.80
85.00
82.20
98.15
93.71
m64
64.00
63.26
41.32
38.68
95.00
91.80
109.70
104.65
m72
72.00
71.26
46.45
43.55
105.00
101.40
121.24
115.60
m80
80.00
79.26
51.58
48.42
115.00
111.00
132.72
126.54
m90
90.00
89.13
57.74
54.26
130.00
125.50
150.11
143.07
m100
90.00
99.13
63.9
60.10
145.00
140.00
167.43
159.60

B348 Ti Threaded Rod Dimensions

B348 Ti Threaded Rod Dimensions
D

P
(millimeter)

D

P
(millimeter)

M2 0.4 M20 1.5/2.5
M2.5 0.45 M22 1.5/2.5
M3 0.5 M24 2/3
M3.5 0.6 M27 2/3
M4 0.7 M30 2/3.5
M5 0.8 M33 2/3.5
M6 1 M36 3/4
M8 1/1.25 M39 3/4
M10 1/1.25/1.5 M42 3/4.5
M12 1.25/1.5/1.75 M45 3/4.5
M14 1.5/2 M48 3/5
M16 1.5/2 M52 3/5
M18 1.5/2.5

Custom Titanium Flat Washer Dimensions

Custom Titanium Flat Washer Dimensions
Size Table
USS
SAE
Inside Diameter (I.D.) Of
(A)
Outside Diameter (O.D.) Of
(B)
Thickness Of
(C)
I.D. Of
(A)
O.D. Of
(B)
Thickness Of
(C)
#2
-
-
-
3/32"
1/4"
0.020"
#4
-
-
-
1/8"
5/16"
0.032"
#6
-
-
-
5/32"
3/8"
0.049"
#8
-
-
-
3/16"
7/16"
0.049"

Titanium Grade 2 Stubs Size/ Torque Chart And Check Ti Motorcycle Bolts Chemical Composition.


Grade 5 Titanium Fasteners Equivalent

STANDARD WERKSTOFF NR. UNS
Titanium Grade 2 Fasteners 3.7035 R50400
Titanium Grade 5 Fasteners 3.7165 R56400

Chemical Equation Of Titanium Machine Screws

Grade Fe% C% N% H% O% Al% V% Mo% Ni% Pd% Ti

Grade 1

0.2

0.08

0.03

0.015

0.18

BAL.

Grade 2

0.3

0.08

0.03

0.015

0.25

BAL.

Grade 3

0.3

0.08

0.05

0.015

0.35

BAL.

Grade 4

0.3

0.08

0.05

0.015

0.40

BAL

Grade 5

0.25

0.08

0.03

0.015

0.02

5.5 – 6.75

3.5 – 4.5

BAL

Grade 7

0.3

0.08

0.03

0.015

0.25

0.12 – 0.25

BAL.

Grade 9

0.25

0.08

0.03

0.015

0.15

2.5 – 3.3

2.0 – 3.0

BAL.

Grade 12

0.3

0.08

0.03

0.015

0.25

0.2 – 0.4

0.6 – 0.9

BAL.

Grade 23

0.3

0.08

0.03

0.015

0.13

5.5 – 6.75

BAL


Refer Titanium Heavy Hex Nuts Dimensions Chart And UNS R56400 Metric Fasteners Mechanical Properties.

Mechanical Behavior Of Titanium Nuts And Bolts

Grade Tensile Strength (min) Yield Strength 0.2% Offset Elongation in 2 inch or 50mm % (min)

KSI

MPa

KSI

MPa

Gr.1

35

240

20 – 45

138 – 310

24

Grade 2

50

345

40 – 65

275 – 450

20

Grade 3

65

450

55 – 80

380 – 550

18

Grade 4

80

550

≥70

≥483

15

Grade 5

138

950

≥128

≥880

14

Grade 7

50

345

≥40

≥275

24

Grade 9

125

860

≥105

≥725

10

Grade 12

70

483

≥50

≥345

18

Grade 23

125

860

≥115

≥790

15


Titanium Machine Screws Weight Chart

Weight Chart Of
Machine Screws ( Type 1, 23,) F Or G Tapping Screws
LBS. Per 1000 pieces
Diameters Row
Lengths Row #2 #3 #4 #5 #6 #8 #10 #12 1/4″ 5/16″ 3/8″
1/8 0.40 0.55 0.70 1.1 1.4
3/16 0.50 0.70 0.90 1.2 1.5 2.5 3.9
1/4 0.60 0.80 1.00 1.4 1.7 2.8 4.3 5.6 8.5
5/16 0.60 0.90 1.20 1.5 1.9 3.1 4.6 6.1 9.1 16.7
3/8 0.70 0.90 1.30 1.7 2.1 3.4 5.0 6.5 9.8 17.7 29.2
7/16 0.80 1.00 1.50 1.9 2.2 3.6 5.4 6.9 10.4 18.8 30.7
1/2 0.80 1.10 1.60 2.0 2.4 3.9 5.8 7.4 11.1 19.8 32.2
9/16 0.90 1.20 1.70 2.2 2.6 4.2 6.2 7.8 11.7 20.9 33.6
5/8 1.00 1.30 1.80 2.3 2.8 4.5 6.6 8.3 12.4 21.9 35.1
3/4 1.10 1.50 2.10 2.6 3.2 5.0 7.3 9.2 13.6 24.0 38.0
7/8 1.30 1.70 2.30 3.0 3.5 5.6 8.1 10.1 14.9 26.1 41.0
1″ 1.40 1.90 2.50 3.4 3.9 6.2 8.9 11.0 16.1 28.8 44.0
1-1/8″ 1.50 2.00 2.80 3.8 4.3 6.7 9.6 11.9 17.4 30.2 47.0
1-1/4″ 1.60 2.20 3.00 4.1 4.6 7.3 10.4 12.8 18.7 32.3 49.8
1-1/2″ 1.80 2.50 3.50 4.7 5.3 8.3 11.9 14.7 21.2 36.5 55.8
1-3/4″ 2.10 2.90 4.00 5.3 6.1 9.4 13.5 16.5 23.7 40.7 61.7
2″ 2.40 3.30 4.50 6.0 6.8 10.6 15.0 18.3 26.2 44.8 67.6
2-1/4″ 2.60 3.60 5.00 6.7 7.6 11.8 16.6 20.1 28.8 19.0 73.5
2-1/2″ 2.80 3.90 5.50 7.3 8.3 12.9 18.1 22.0 31.3 53.2 79.5
2-3/4″ 3.10 4.30 6.00 7.9 9.1 13.9 19.7 23.8 33.9 57.3 85.3
3″ 3.40 4.70 6.50 8.6 9.8 15.0 21.2 25.6 36.4 61.5 91.3

Titanium Bolts Tensile Strength

Size Of Metric A1/ A2/ A4-50 (N) A1/ A2/ A4-70 (N) A1/ A2/ A4-80 (N)
Metric 3 2515 3521 4024
Metric 3.5 3390 4646 5424
Metric 4 4390 6146 7024
Metric 5 7100 9940 11360
Metric 6 10050 14070 16080
Metric 7 14450 20230 23120
Metric 8 18300 25620 29280
Metric 10 29000 40600 46400
Metric 12 42150 59010 67440
Metric 14 57500 80500 92000
Metric 16 78500 109900 125600
Metric 18 96000 134400 153600
Metric 20 122500 171500 196000
Metric 22 151500 212100 242400
Metric 24 176500 247100 282400
Metric 27 229500 321300 367200
Metric 30 280500 392700 448800
Metric 33 408500 571900 653600
Metric 36 408500 571900 653600
Metric 39 488000 683200 780800

Compare Prices Before You Buy DIN 3.7165 Double Ended Studs/ Drilled Washers/ Socket Head Cap Screws In Mumbai, India.

Torque Specs For Titanium Bolts

Specifications Of Torque
Size Of Bolts
Inch or #
Threads
Per Inches
Standard Dry Torque in Pounds-Inch
#2
56
2.5
2.6
64
3.0
3.2
#3
48
3.9
4.0
56
4.4
4.6
#4
40
5.2
5.5
48
6.6
6.9
#5
40
7.7
8.1
44
9.4
9.8
#6
32
9.6
10.1
40
12.1
12.7
#8
32
19.8
20.7
36
22.0
23.0
#10
24
22.8
23.8
32
31.7
33.1
Size Of Bolts
Inches or #
Threads
Per Inches
Standard Dry Torque in Pounds-Inch
1/4
20
75.2
78.8
28
94.0
99.0
5/16
18
132
138
24
142
147
3/8
16
236
247
24
259
271
7/16
14
376
393
20
400
418
1/2
13
517
542
20
541
565
Size Of Bolts
Inch or #
Threads
Per Inches
Standard Dry Torque in Pounds-Inch
9/16
12
682
713
18
752
787
5/8
11
1110
1160
18
1244
1301
3/4
10
1530
1582
16
1490
1558
7/8
9
2328
2430
14
2318
2420
1
8
3440
3595
14
3110
3250
Size Of Bolts
In Inch or #
Threads
As Per Inches
Standard Dry Torque in Pounds-Foot
1 1/8
7
413
432
12
390
408
1 1/4
7
523
546
12
480
504
1 1/2
6
888
930
12
703
732

Black Titanium Bolts Custom Head Style

R56400 Nuts Size Chart

Size Of Nut
(millimeter)
Diameter Of
(millimeter)
Height Table
(millimeter)
Hex Nut
Jam Nut
Nylock Nut
2
4
1.6
1.2
-
2.5
5
2
1.6
-
3
5.5
2.4
1.8
4
4
7
3.2
2.2
5
5
8
4
2.7
5
6
10
5
3.2
6
7
11
5.5
3.5
-
8
13
6.5
4
8
10
17
8
5
10
12
19
10
6
12
14
22
11
7
14
16
24
13
8
16
18
27
15
9
18.5
20
30
16
10
20

DIN 3.7165 Fasteners Custom Drive Style

DIN 3.7165 Fasteners Custom Drive Style

Ti Threaded Rod Size Chart

Size Table Of Titanium Threaded Rod
per Inch Threads
Frac. [Number]
Decimal
UNC
UNF
1/8 [#6]
0.1380
32
40
5/32 [#8]
0.1640
32
36
3/16 [#10]
0.1900
24
32
1/4
0.2500
20
28
5/16
0.3125
18
24
3/8
0.3750
16
24
7/16
0.4375
14
20
1/2
0.5000
13
20
9/16
0.5625
12
18
5/8
0.6250
11
18
3/4
0.7500
10
16
7/8
0.8750
9
14
1
1.0000
8
12, 14
1 1/8
1.1250
7
12
1 1/4
1.2500
7
12
1 3/8
1.3750
6
12
1 1/2
1.5000
6
12
1 3/4
1.7500
5

Grade 2 Titanium Screws Size Chart

Grade 2 Titanium Screws Size Chart

B348 Titanium Wood Screw Dimensions

B348 Titanium Wood Screw Dimensions

Dimensions Of Wood Screws ANSI B18.6.1 : Slotted & Phillips Flat Head

Sizes

Size Of Phillips Driver

Diameter Of Head (A) Height Of Head (H) Slot Width (J) Slot Depth (T) Recess Dimension
Maximum Minimum Ref Maximum Minimum Maximum Minimum Diameter Maximum (M) Diameter Minimum (M) Depth Maximum (G) Depth Minimum (G) Width Minimum (N)
2 1 .172 .147 .051 .031 .023 .023 .015 .102 .089 .063 .047 .017
3 1 .199 .141 .059 .035 .027 .027 .017 .107 .094 .068 .052 .018
4 1 .225 .195 .067 .039 .031 .030 .020 .128 .115 .089 .073 .018
5 2 .252 .220 .075 .043 .035 .034 .022 .154 .141 .086 .063 .027
6 2 .279 .244 .083 .048 .039 .038 .024 .174 .161 .106 .083 .029
7 2 .305 .268 .091 .048 .039 .041 .027 .189 .176 .121 .098 .030
8 2 .332 .292 .100 .054 .045 .045 .029 .204 .191 .136 .113 .032
9 2 .358 .316 .108 .054 .045 .049 .032 .214 .201 .146 .123 .033
10 3 .385 .340 .116 .060 .050 .053 .034 .258 .245 .146 .123 .034
12 3 .438 .389 .132 .067 .056 .060 .039 .283 .270 .171 .148 .036
14 3 .507 .452 .153 .075 .064 .070 .046 .283 .270 .171 .148 .036
16 3 .544 .485 .164 .075 .064 .075 .049 .303 .290 .191 .168 .039

ASTM B348 Titanium Oval Head Screw Dimensions

ASTM B348 Titanium Oval Head Screw Dimensions

Oval Head Screws Dimensions As Per ASME B18.6.1

Size*

Size Of Phillips Driver

Diameter Of Head (A)
Height Of Head (H)

Slot Width (J)
Slot Depth (T)
Recess Dimension
Maximum
Minimum
Side Height (Ref.)
Total Height Maximum
Total Height Minimum
Maximum
Minimum
Maximum
Minimum
Diameter Maximum (M)
Diameter Minimum (M)
Depth Maximum (G)
Depth Minimum (G)
Width Minimum (N)
4
1
.225
.195
.067
.104
.084
.039
.031
.059
.049
.136
.123
.094
.077
.019
5
2
.252
.220
.075
.116
.095
.043
.035
.067
.055
.158
.145
.085
.061
.028
6
2
.279
.244
.083
.128
.105
.048
.039
.074
.060
.178
.165
.105
.080
.030
8
2
.332
.292
.100
.152
.126
.054
.045
.088
.072
.205
.192
.131
.106
.033
9
2
.358
.316
.108
.164
.137
.054
.045
.095
.078
.216
.203
.144
.119
.034
10
3
.385
.340
.116
.176
.148
.060
.050
.103
.084
.261
.248
.142
.118
.037
12
3
.438
.389
.132
.200
.169
.067
.056
.117
.096
.283
.270
.165
.140
.040

Titanium Countersunk Screws Dimensions

Titanium Countersunk Screws Dimensions

Size
Diameter Of Body
Pitch Thread
Size Of Hex Socket
Maximum Cone Diameter
Head Diameter
Height Of Head
length Of Soc.
D(maximum)
D(minimum)
J
A1
A_maximum
A_Minimum
H
K
M3
3.00
2.86
0.5
2,0
6,72
6,00
5,82
1,86
1,05
M4
4.00
3.82
0.70
2,5
8,96
8,00
7,78
2,48
1,49
M5
5.00
4.82
0.8
3,0
11,2
10,00
9,78
3,1
1,86
M6
6.00
5.82
1.0
4,0
13,44
12,00
11,75
3,72
2,16
M8
8.00
7.78
1.25
5,0
17,92
16,00
15,73
4,96
2,85
M10
10.00
9.78
1.5
6,0
22,4
20,00
19,67
6,2
3,60
M12
12.00
11.73
1.75
8,0
26,88
24,00
23,67
7,44
4,35
M16
16.00
15.73
2.0
10,0
33,6
32,00
29,67
8,8
4,89
M20
20.00
19.67
2.5
10,0
40,32
40,00
35,61
10,16
5,49

Standard Of Titanium Fasteners (DIN/ ISO/ BS)

Titanium Hexagon Bolts / Set Screws
Titanium Stud Bolts
Titanium Hexagon Nuts
Titanium Socket Cap screws
DIN 931
BS4882
DIN 934
DIN 912
DIN 933
DIN 976
BS 1768
DIN 6912
BS 1768
BS 1769
DIN 7984
UNI 5731
BS 1083
ANSI B18.3
UNI 5739
BS 3692
ISO 4762
ISO 4014
ISO 4032
UNI 5931
ISO 4017
ISO 4033
BS 2470
BS 1769
ANSI B18.2.2
BS 4168
BS 3692
ANSI B18.2.1

Metric Titanium Bolts Coatings

Titanium Bolts And Nuts Coatings

Mirror Buffed
Hot Dipped Galvanizing
Epoxy Coating
Electro Polished
Passivation
Teflon Coating
Oxidized
Zinc Plating
Chrome Plating

At Rajtilak Metal, we manufacture custom titanium fasteners in varying sizes, shapes, dimensions, standards and tolerances as required by our buyers. Since the metal is lightweight and is a strong refractory one, the metric titanium bolts are generally used in not only medical and chemical but also military applications. This would ensure that the titanium screws are used in sporting goods due to their numerous unique properties, also the metal tends to be critical to the aerospace industry and used as titanium motorcycle bolts as well.


Get Instant Delivery Types Of Titanium Fasteners In India


Mettec Titanium Nuts & Washers

Mettec Titanium Nuts & Washers

Titanium Rings

Titanium Rings

M8 Titanium Springs

M8 Titanium Springs

Ti Hex Head Bolts

Ti Hex Head Bolts

Custom Titanium Nuts and Bolts

Custom Titanium Nuts and Bolts

Titanium Grade 2 Bolts and Nuts

Titanium Grade 2 Bolts and Nuts

Titanium Grade 5 Exhaust Bolts

Titanium Grade 5 Exhaust Bolts

UNS R50400 Hex Bolts

UNS R50400 Hex Bolts

Werkstoff Nr. 3.7035 Anchor Bolt

Werkstoff Nr. 3.7035 Anchor Bolt

B348 Ti Square U Bolts

B348 Ti Square U Bolts

R56400 Carriage Bolts

R56400 Carriage Bolts

DIN 3.7165 Stud Bolts

DIN 3.7165 Stud Bolts

Grade 2 Titanium M10 Bolts

Grade 2 Titanium M10 Bolts

ASTM B348 Titanium U Bolts

ASTM B348 Titanium U Bolts

Mettec Titanium Lag Bolts

Mettec Titanium Lag Bolts

DIN 3.7035 Threaded Rod

DIN 3.7035 Threaded Rod


Some Of The Countries We Have Supplied Various Types Of Titanium Fasteners Recently:

M8 Titanium Bolts South Africa, Bahrain, Singapore, Singapore
Grade 5 Titanium Flange Nuts Philippines, UK, Australia, Nigeria
UNS R50400 Socket Head Cap Screws Oman, UAE, Hong Kong, Malaysia
Werkstoff Nr. 3.7035 Threaded Rod Chile, Singapore, Iran, Italy
Ti Countersunk Washers United Arab Emirates (UAE), Norway, Turkey, Malaysia
Titanium Bolts and Nuts United Kingdom -UK, Malaysia, Europe, UAE
Ti-6al-4v Rings Dammam -KSA, Belgium, Philippines, Indonesia.
Titanium Hex Bolts Qatar, Thailand, Europe, France.
UNS R50400 Socket Head Cap Screws Malaysia, Thailand, Germany, Czechia
Werkstoff Nr. 3.7035 Spring Washers Finland, Bangladesh, Malaysia, USA
Titanium Heavy Hex Nuts Saudi Arabia (KSA), Kuwait, South Africa, Brazil
UNS R56400 Metric Fasteners Netherlands, Russia, Malaysia, Dubai


About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy