Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

Titanium Flanges Manufacturer In India

Titanium Flange Pressure Temperature Rating And Ti Grade 2 Flanges Specification List.

Titanium Flanges Manufacturer In India

Titanium Flanges Manufacturer In India

Titanium Blind Flanges

Titanium Blind Flanges

Titanium Weld Neck Flanges

Titanium Weld Neck Flanges

Table Of Contents


Titanium Grade 2 Flanges Commonly Used In Welding Applications?

Titanium Grade 2 Flanges are referred to as commercially pure or unalloyed titanium grades. Due to its strong weldability properties, titanium grade 2 flanges are commonly used in applications that require welding. Light weight, yet stronger than several stainless steel grades, the Titanium Gr 5 Flanges is referred to as Ti 6Al-4V. Titanium grade 5 is considered to be an alpha- beta alloy and is used in industries such as the oilfield. Apart from being light in weight both grades of titanium i.e. grade 2 and grade 5 have properties like high strength, stiffness, low density, toughness, as well as good resistance to corrosion even at very low to elevated temperature settings.


Titanium flanges manufacturers in India


What Purpose Of Titanium Blind Flanges?

The purpose of these Titanium Blind Flanges is to block off a section of pipe or a nozzle on a vessel which is not being used. Titanium exhaust flanges is a device, which can be used to attach an exhaust pipe either to an exhaust manifold or to attach another piece of exhaust pipe.


What Purpose Of Titanium Slip On Flanges?

At Rajtilak Metal the Titanium Slip On Flange is mass produced with an inside diameter which is slightly bigger in comparison to the pipe's outside diameter. Slip on pipe Titanium Flanges are typically provided with either a raised or flat face, depending on the application it is to be utilized for.


Titanium Flanges Can Be Attached Collar Or Ring?

Titanium pipe flanges is a type of disc, collar or ring which can be attached to pipe with the sole purpose being to provide a substantial amount of support for either strength, blocking off a pipeline or in order to implement the attachment of one or more items.


What Purpose Of Titanium Weld Neck Flanges?

Titanium weld neck flanges those flanges that are considered to be well suited for use especially in applications in hostile environments which can have extreme or fluctuations of temperature, pressure or any other sources of stress.


Check Titanium Flange Bolts And Nuts Chart And Get Free Quote WERKSTOFF NR. 3.7035 Exhaust Flanges.


Refer Titanium Blind Flange/ Titanium Slip On Flange/ Titanium Weld Neck Flange/ Titanium Socket Weld Flange Price List.


View Titanium Grade 2 Flanges Dimensions with Tolerances And Weight Formula Of Titanium V Band Flange In MM.

Titanium Header Flange Thickness Calculation For Pressure Vessel And Accept All Small And Large Orders of Ti Pipe Flanges.

Flange Titanium Price
Type Of Flanges Size Material Class Price In India (INR)
Titanium Blind Flanges 3/4" Grade 2 Class 150 120.00
Titanium Blind Flanges 1" Grade 2 Class 150 130.32
Titanium Blind Flanges 1-1/2" Grade 2 Class 150 200.00
Titanium Blind Flanges 2" Grade 2 Class 150 250.00
Titanium Weld Neck Flanges 2" X SCH STD Grade 2 Class 150 330.45
Titanium Weld Neck Flanges 3" X SCH STD Grade 2 Class 150 520.00
Titanium Weld Neck Flanges 4" X SCH STD Grade 2 Class 150 650.00
Titanium Weld Neck Flanges 6" X SCH STD Grade 2 Class 150 1250.00
Titanium Slip On Flanges 2" Grade 2 Class 150 200.00
Titanium Slip On Flanges 3" Grade 2 Class 150 300.34
Titanium Slip On Flanges 10" Grade 2 Class 150 1800.34
Titanium Slip On Flanges 20" Grade 2 Class 150 6000.00
Titanium Socket Weld Flanges 3/4" X SCH XS Grade 2 Class 150 140.00
Titanium Socket Weld Flanges 1" X SCH XS Grade 2 Class 150 250.76
Titanium Socket Weld Flanges 1-1/2” X SCH XS Grade 2 Class 150 390.00

Please note this is an approx Price of Titanium Flanges in India. For final Titanium Grade 2 Flanges Price List Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com


Titanium Flange Pressure Temperature Rating

ASME B16.5 Titanium Flanges Pressure Rating Chart
Temperature °F 150# 300# 400# 600# 900# 1500# 2500#
-20 to 100 275 720 960 1440 2160 3600 6000
200 230 600 800 1200 1800 3000 5000
300 205 540 720 1080 1620 2700 4500
400 190 495 660 995 1490 2485 4140
500 170 465 620 930 1395 2330 3880
600 140 435 580 875 1310 2185 3640
650 125 430 575 860 1290 2150 3580
700 110 425 565 850 1275 2125 3540
750 95 415 555 830 1245 2075 3460
800 80 405 540 805 1210 2015 3360
850 65 395 530 790 1190 1980 3300
900 50 390 520 780 1165 1945 3240
950 35 380 510 765 1145 1910 3180
1000 20 320 430 640 965 1605 2675
1050 20 310 410 615 925 1545 2570
1100 20 255 345 515 770 1285 2145
1150 20 200 265 400 595 995 1655
1200 20 155 205 310 465 770 1285
1250 20 115 150 225 340 565 945
1300 20 85 115 170 255 430 715
1350 20 60 80 125 185 310 515
1400 20 50 65 95 145 240 400
1450 15 35 45 70 105 170 285
1500 10 25 35 55 80 135 230

Standard Specification Of Titanium Exhaust Flange

Material Specification Of : Titanium Flanges
Standard Cover : pressure ratings & temperature ratings, materials, marking, dimensions, weight, tolerances, testing
Contact Faces RTJ (Ring Type Joint), FF (Flat Face), RF (Raised Face), T/G (Tongue And Groove ), M/F (Male And Female)
Size Chart Normal Pipe Size 1/2 to NPS 24"
Thickness Normal Pipe Size ≤ 18
Bore Diameter Normal Pipe ≤ 10
Flanges Standards EN 1092-1, JIS, ASME B16.5, ASME B16.47 type A, UNI, DIN
Pressure Rating Class 150 To Class 2500
High Temperature Above 200°C (400°F) For Class 150 Or Above 400°C (750°F)
Low Temperature Above -29 Degree C (−20°F)
Common Types Of Flanges: Slip On (SORF), Weld Neck (WNRF), Blind (BLRF), Lap Joint (Loose), Threaded (NPT), Socket-Weld (SWRF)
Special Types Of Flanges : Nipoflange, Elboflange, Latroflange, Swivel Flange, Expanding Flange, Reducing Flange, Weldoflange
Marking Standard Name of Manufacturer
Schedule
Type of Flange Facing
Nominal Pipe Size
Pressure Class
ASME B16 Designation
Bolt Type high strength bolts
medium strength bolts
low strength bolts
European Standard Flanges JIS B2220 Flanges (5k to 30k) and KS1503 flanges
Russian-Standard Flanges GOST 12820 / 12821-80, DIN, UNI, EN 1092-1
South African Standard Flanges SANSflanges And SABS flanges
Surface Finish smooth, concentric serrated, stock
Gaskets Types Full Face Gasket
Flat Ring Gasket
Metallic Ring Gakset
Advantages Of Pipe Flange Used to Connect Pipe System
Easy Repair Pipe System
Assembled Without Welding

Titanium Flange Bolts And Nuts

Class 150 Flanges Class 300 Flanges Class 600 Flanges
NPS # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length
1/16 RF RTJ 1/16 RF RTJ 1/4 RF RTJ
1/2 4 0.50 2-1/4 4 0.50 2-1/2 3 4 0.50 3 3
3/4 4 0.50 2-1/2 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1 4 0.50 2-1/2 3 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1-1/4 4 0.50 2-3/4 3-1/4 4 0.63 3-1/4 3-3/4 4 0.63 3-3/4 3-3/4
1-1/2 4 0.50 2-3/4 3-1/4 4 0.75 3-1/2 4 4 0.75 4-1/4 4-1/4
2 4 0.63 3-1/4 3-3/4 8 0.63 3-1/2 4 8 0.63 4-1/4 4-1/4
2-1/2 4 0.63 3-1/2 4 8 0.75 4 4-1/2 8 0.75 4-3/4 4-3/4
3 4 0.63 3-1/2 4 8 0.75 4-1/4 4-3/4 8 0.75 5 5
3-1/2 8 0.63 3-1/2 4 8 0.75 4-1/4 5 8 0.88 5-1/2 5-1/2
4 8 0.63 3-1/2 4 8 0.75 4-1/2 5 8 0.88 5-3/4 5-3/4
5 8 0.75 3-3/4 4-1/4 8 0.75 4-3/4 5-1/4 8 1.00 6-1/2 6-1/2
6 8 0.75 4 4-1/2 12 0.75 4-3/4 5-1/2 12 1.00 6-3/4 6-3/4
8 8 0.75 4-1/4 4-3/4 12 0.88 5-1/2 6 12 1.13 7-1/2 7-3/4
10 12 0.88 4-1/2 5 16 1.00 6-1/4 6-3/4 16 1.25 8-1/2 8-1/2
12 12 0.88 4-3/4 5-1/4 16 1.13 6-3/4 7-1/4 20 1.25 8-3/4 8-3/4
14 12 1.00 5-1/4 5-3/4 20 1.13 7 7-1/2 20 1.38 9-1/4 9-1/4
16 16 1.00 5-1/4 5-3/4 20 1.25 7-1/2 8 20 1.50 10 10
18 16 1.13 5-3/4 6-1/4 24 1.25 7-3/4 8-1/4 20 1.63 10-3/4 10-3/4
20 20 1.13 6-1/4 6-3/4 24 1.25 8 8-3/4 24 1.63 11-1/4 11-1/2
24 20 1.25 6-3/4 7-1/4 24 1.50 9 10 24 1.88 13 13-1/4

 

Class 900 Flanges Class 1500 Flanges Class 2500 Flanges
NPS # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length
1/4 RF RTJ 1/4 RF RTJ 1/4 RF RTJ
1/2 4 0.75 4-1/4 4-1/4 4 0.75 4-1/4 4-1/4 4 0.75 4-3/4 4-3/4
3/4 4 0.75 4-1/2 4-1/2 4 0.75 4-1/2 4-1/2 4 0.75 5 5
1 4 0.88 5 5 4 0.88 5 5 4 0.88 5-1/2 5-1/2
1-1/4 4 0.88 5 5 4 0.88 5 5 4 1.00 6 6
1-1/2 4 1.00 5-1/2 5-1/2 4 1.00 5-1/2 5-1/2 4 1.13 6-3/4 6-3/4
2 8 0.88 5-3/4 5-3/4 8 0.88 5-3/4 5-3/4 8 1.00 7 7
2-1/2 8 1.00 6-1/4 6-1/4 8 1.00 6-1/4 6-1/4 8 1.13 7-3/4 8
3 8 0.88 5-3/4 5-3/4 8 1.13 7 7 8 1.25 8-3/4 9
4 8 1.13 6-3/4 6-3/4 8 1.25 7-3/4 7-3/4 8 1.50 10 10-1/4
5 8 1.25 7-1/2 7-1/2 8 1.50 9-3/4 9-3/4 8 1.75 11-3/4 12-1/4
6 12 1.13 7-1/2 7-3/4 12 1.38 10-1/4 10-1/2 8 2.00 13-1/2 14
8 12 1.38 8-3/4 8-3/4 12 1.63 11-1/2 11-3/4 12 2.00 15 15-1/2
10 16 1.38 9-1/4 9-1/4 12 1.88 13-1/4 13-1/2 12 2.50 19-1/4 20
12 20 1.38 10 10 16 2.00 14-3/4 15-1/4 12 2.75 21-1/4 22
14 20 1.50 10-3/4 11 16 2.25 16 16-3/4
16 20 1.63 11-1/4 11-1/2 16 2.50 17-1/2 18-1/2
18 20 1.88 12-3/4 13-1/4 16 2.75 19-1/2 20-3/4
20 20 2.00 13-3/4 14-1/4 16 3.00 21-1/4 22-1/4
24 20 2.50 17-1/4 18 16 3.50 24-1/4 25-1/2

Ti Flanges Dimensions Chart

Ti Flanges Dimensions Chart


NPS O.D. of Flange Flanges Thickness Diameter of RF Diameter of Hub at Base Lengtd Tdru Hub Bore or Diameter Dia. of Hub at Bevel Radius of Fillet Deptd of Socket
Welding (WN) Neck Slip-On (SORF) Threaded (NPT) Socket (SWRF) Lap Joint (Loose) Slip-on (SORF) Socket (SWRF) Lap Joint (Loose)
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2

Titanium Flange Weight

Nominal Pipe Sizes (NPS) Slip On (SORF) Threaded (NPT) Socket Weld (SWRF) Lap Joint (Loose) Blind (BLRF) Weld Neck (WRNR)
½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
3 3 3 3 4 4
2 5 5 5 5 5 6
8 8 8 8 7 10
3 9 9 9 9 9 11.5
11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268

Titanium Pipe Flanges Equivalent Grade

STANDARD WERKSTOFF NR. UNS
Titanium Gr. 2 Flanges 3.7035 R50400
Titanium Gr. 5 Flanges 3.7165 N56400

UNS R50400 Flanges Chemical Composition

Grade Ti C Fe H N O Al V
Titanium Flanges 99.2 minimum 0.1 maximum 0.3 maximum 0.015 maximum 0.03 maximum 0.25 maximum
Ti Grade5 90 minimum 0.25 maximum 0.2 maximum 6 minimum 4 minimum

Werkstoff Nr. 3.7035 Flanges Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr 2 Flanges 4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20 %
Titanium Gr 5 Flanges 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Titanium Header Flange Thickness Calculation

ANSI B16.5 Titanium Flanges Wall Thickness
NPS (Normal Pipe Sizes) Outside Daimeter (O.D.) Schedule 10 Schedule 20 Schedule 30 STD Wall Schedule 40 Schedule 60 EXT Hvy Schedule 80 Schedule 100 Schedule 120 Schedule 140 Schedule 160 XX Hvy
½ 0.84 0.083 ... ... 0.109 0.109 ... 0.147 0.147 ... ... ... 0.188 0.294
¾ 1.05 0.083 ... ... 0.113 0.113 ... 0.154 0.154 ... ... ... 0.219 0.308
1 1.315 0.109 ... ... 0.133 0.133 ... 0.179 0.179 ... ... ... 0.25 0.358
1 ¼ 1.66 0.109 ... ... 0.14 0.14 ... 0.191 0.191 ... ... ... 0.25 0.382
1 ½ 1.9 0.109 ... ... 0.145 0.145 ... 0.2 0.2 ... ... ... 0.281 0.4
2 2.375 0.109 ... ... 0.154 0.154 ... 0.218 0.218 ... ... ... 0.344 0.436
2 ½ 2.875 0.12 ... ... 0.203 0.203 ... 0.276 0.276 ... ... ... 0.375 0.552
3 3.5 0.12 ... ... 0.216 0.216 ... 0.3 0.3 ... ... ... 0.438 0.6
3 ½ 4 0.12 ... ... 0.226 0.226 ... 0.318 0.318 ... ... ... ... 0.636
4 4.5 0.12 ... ... 0.237 0.237 ... 0.337 0.337 ... 0.438 ... 0.531 0.674
5 5.563 0.134 ... ... 0.258 0.258 ... 0.375 0.375 ... 0.5 ... 0.625 0.75
6 6.625 0.134 ... ... 0.28 0.28 ... 0.432 0.432 ... 0.562 ... 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 ...
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 ...
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 ...
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 ...
22 22 0.25 ... ... 0.375 ... ... 0.5 ... ... .... .... .... ....
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 ....
26 26 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
30 30 0.312 0.5 0.625 0.375 .... .... 0.5 .... .... .... .... .... ....
36 36 0.312 0.5 0.625 0.375 0.75 .... 0.5 .... .... .... .... .... ....
40 40 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
42 42 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..
48 48 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..

Titanium Grade 5 Flanges Tolerance Chart

ASME B16.5Tolerance
A Outside Diameter (O.D.)
  • When Outside Diameter (O.D.) is 24" or less: ±1/16" (1.6 mm)
  • When Outside Diameter (O.D.) is over 24": ±1/8" (3.2 mm)
D Inside Diameter
  • 10" and smaller: ±1/32" (0.8 millimeter)
  • 12" thru 18": +1/8" (3.2 millimeter)
  • 20" and larger: -1/16" (1.6 millimeter)
B Diameter of contact face
  • 1/16" raised face: ±1/32" (0.8 millimeter)
  • 1/4" Raised Face (RF), Tongue & Groove (T/G), (male & female), (m/f): ±1/64" (0.4 mm)
J Diameter of hub at base
  • When hub base is 24" or smaller: ±1/16" (1.6 millimeter)
  • When hub base is over 24": ±1/8" (3.2 millimeter)
H Diameter of hub at point of welding
  • 5" and smaller: +3/32" (2.4 millimeter), -1/32" (0.8 millimeter)
  • 6" and larger: +5/32" (4.0 millimeter), -1/32 (0.8 millimeter)
P Drilling
  • Bolt circle: ±1/16" (1.6 millimeter)
  • Bolt hole spacing: ±1/32" (0.8 millimeter)
  Eccentricity of bolt circle with respect to facing
  • 2 1/2" and smaller ±1/32" (0.8 millimeter) max.
  • 3" and larger ±1/16" (1.6 millimeter) max.
C Thickness
  • 18" and smaller: ±1/8" (3.2 millimeter), -0"
  • 20" and larger: ±3/16" (4.8 millimeter), -0"
K Length of hub
  • 10" and smaller: ±1/16" (1.6 millimeter)
  • 12" and larger: ±1/8" (3.2 millimeter)

Independent Stockholder Types Of Titanium Flange

 Stainless Steel Titanium Slip On Flange

Titanium Slip On Flange

Ti Socket Weld Flange

Ti Socket Weld Flange

Titanium Blind Flange

Titanium Blind Flange

Titanium Weld Neck Flange

Titanium Weld Neck Flange

Titanium Threaded Flange

Titanium Threaded Flange

Titanium Lap Joint Flange

Titanium Lap Joint Flange

Titanium Long Weld Neck Flanges

Titanium Long Weld Neck Flanges

Titanium Spectacle Blind Flange

Titanium Spectacle Blind Flange

Titanium Spade Flange

Titanium Spade Flange

Titanium Flange Ring Spacer

Titanium Flange Ring Spacer

Titanium Nipo Flange

Titanium Nipo Flange

Titanium Weldo Flange

Titanium Weldo Flange

Titanium Flange olet

Titanium Flange olet

Titanium Bleed Ring Flange

Titanium Bleed Ring Flange

Titanium Forged Flanges

Titanium Forged Flanges

Titanium Plate Flange

Titanium Plate Flange

Titanium Ring Type Joint Flange

Titanium Ring Type Joint Flange

Titanium Raised Face Flange

Titanium Raised Face Flange

Titanium Tongue and Groove Flange

Titaniums Tongue and Groove Flange

Titanium Male and Female Flange

Titanium Male and Female Flange

Titanium Reducing Flange

Titanium Reducing Flange

Titanium Square Flange

Titanium Square Flange

Titanium High hub Blind Flange

Titanium High hub Blind Flange

Titanium Orifice Flanges

Titaniums Orifice Flanges

Titanium Puddle Flange

Titaniums Puddle Flange

Titanium Expander Flange

Titanium Expander Flange

Titanium Flat Flange

Titaniums Flat Flange

Titanium Flange Adapter

Titanium Flange Adapter

Titanium Flange Gasket

Titanium Flange Gasket

Titanium Hydraulic Sae Flanges

Titanium Hydraulic Sae Flanges

Titanium Anchor Flange

Titanium Anchor Flange


Some Of The Countries We Have Supplied Various Types Of Titanium Flanges Recently:

Titanium Slip On Flange South Africa, Bahrain, Singapore, Singapore
Ti Socket Weld Flange Philippines, UK, Australia, Nigeria
Titanium Blind Flange Oman, UAE, Hong Kong, Malaysia
Titanium Weld Neck Flange Chile, Singapore, Iran, Italy
Titanium Threaded Flange United Arab Emirates (UAE), Norway, Turkey, Malaysia
Titanium Lap Joint Flange United Kingdom -UK, Malaysia, Europe, UAE
Titanium Long Weld Neck Flanges Dammam -KSA, Belgium, Philippines, Indonesia.
Titanium Spectacle Blind Flange Qatar, Thailand, Europe, France.
Titanium Spade Flange Malaysia, Thailand, Germany, Czechia
Titanium Flange Ring Spacer Finland, Bangladesh, Malaysia, USA
Titanium Weldo Flange Saudi Arabia (KSA), Kuwait, South Africa, Brazil
Titanium Plate Flange Netherlands, Russia, Malaysia, Dubai
Titanium Raised Face Flange Egypt, UK, Mexico, Spain
Titanium Ring Type Joint Flange UK, Ellington -United States, Poland, Canada
Titaniums Orifice Flanges Canada, Malaysia, Philippines, Singapore
Titanium Square Flange Japan, Romania, Europe, Malaysia
Titaniums Puddle Flange Sweden, China, Malaysia, Colombia


About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Rajtilak Metal © 2021 All Right Reserved. Website Designed And SEO by Mesotek
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy