Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

ASME B16.11 Stainless Steel Threaded Tee

We Are Supplying ANSI B16.11 Threaded Copper Tee Fittings To More Than 60 Locations Worldwide, Most Reliable Brass 1/2 Npt Tee Manufacturer In India.

Check 3000LB Threaded Tee Fittings Dimensions And Weight Chart, Manufacturer Of schedule 80 Carbon Steel Male Threaded Tee In India, BS 3799 Alloy Steel Forged Female Threaded Tee At Lower Prices Compared To other countries

A ASME B16.11 Stainless Steel Threaded Tee is a type of pipe fitting where three one perpendicular cylinder is connected to a pipe with threads in it. The tees are the most commonly used pipe fittings. ASME B16.11 threaded tee dimensions will be up to the nominal bore size of 4 inches. Tee can connect same size pipes, two different sized pipes or three different types of pipes. But the same sized connection is the most common. The threaded tee fittings can connect the pipes with threads at their ends. The ASME B16.11 threaded tee fitting dimensions are for smaller size tees which are common in domestic applications. The screwed tee can be of any material.


ASME B16.11 Stainless Steel Threaded Tee Manufacturers In India

ASME B16.11 Stainless Steel Threaded Tee Manufacturers In India

Threaded Copper Tee Fittings

Threaded Copper Tee Fittings

Threaded Male And Female Tee Fittings

Threaded Male And Female Tee Fittings

Buy schedule 10 Stainless Steel Screwed Tee Certified & Tested, Specialise in distributing ASME B16.11 Bsp Tee Fitting In India, Accept all small/ Large Orders Of B16.11 Npt Threaded Tee, ASTM A182 SS Threaded Tee Stockholder.

Although stainless steel material is the most common, there are other types such as the threaded copper tee. The copper allows for very less corrosion resistance and to be used under mild acidic and basic conditions without much corrosion or oxidation to the tee. The national standards govern the npt threaded tee dimensions and specifications. The npt pipe tee complies with most other standards as well.


What is A Threaded Tee?


ASME B16.11 Stainless Steel Threaded Tee

Alloy Steel Forged Screwed Tee is used in applications where high strength and low corrosion is expected. The corrosion resistance is improved with the alloy and the strength is improved with the forging of the fitting at the production phase. Forged Threaded Tee is used in domestic applications and low pressure industrial applications. Depending on the material, the strength, corrosion resistance and the weight could differ. The ASTM A182 SS Threaded Tees for example are stronger and corrosion resistant compared to ordinary stainless steel. Threaded Equal Tee means the connected pipes on all three openings of the tee are of equal nominal sizes. The Threaded Fittings Tee can be used in petroleum industrial pipelines, effluent collection systems, agricultural systems, food processing, water treatment plants and many other applications.


Threaded Male Tee Fittings Price List


S.NO. Description Piping Material Class Quantity PRICE IN US($)
1. EQ.STRAIGHT TEE: 1/2 NPS, GALV.TO A153, ASME B16.11, ASTM A105, NPT (F) THRD (ASME B1.20.1),CL.3000# G01A 12 NOS $10.81
2. EQ.STRAIGHT TEE: 1 NPS, GALV.TO A153, ASME B16.11, ASTM A105, NPT (F) THRD (ASME B1.20.1),CL.3000# G01A 13 NOS $20.35
3. EQ.STRAIGHT TEE: 2 NPS, GALV TO A153, ASME B16.11, ASTM A105, NPT (F) THRD (ASME B1.20.1),CL.3000# G01A 11 NOS $71.33
4. EQ.STRAIGHT TEE: 1-1/2 NPS, GALV.TO A153, ASME B16.11, ASTM A105, NPT (F) THRD (ASME B1.20.1), CL.3000# G01A 12 NOS $90.56

Please note this is an approx Price of Npt Tee in India. For final ASME B16.11 Stainless Steel Threaded Tee Price List Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.


Brass Threaded Tee Specification


ASME B16.11 threaded tee Dimensions ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799
npt tee Size 1/8″ NB TO 4″ NB
threaded male tee fittings Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering
1 inch brass tee Class 33000 LBS, 6000 LBS, 4500 LBS
threaded male tee fittings Temperature Ratings Up to 1000° F (537° C)
1 inch threaded tee 316 stainless steel, brass, carbon steel
Types of 1 inch threaded tee NPT, ISO/BSP, SAE threads
brass threaded tee Type Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT   
threaded copper tee Form Threaded Tee, Forged Threaded Tee
male threaded tee Production Grades: Stainless Steel Female Threaded Tee, Alloy Steel Female Threaded Tee, Duplex Threaded Tee Adapter, Nickel Alloys Threaded Equal Tee, Low Temperature Steel Threaded Lateral Tee, Carbon Steel Threaded Straight Tee, Cupro Nickel Threaded Iron Tee
Stainless Steel Threaded Tee Sizes available 1/16 to 1 in.
Main Types Pipe nipples, adapter and gaskets, reducing bushing and reducers, couplings, elbows, tees, crosses, union ball joints, caps, and plugs
threaded copper tee fittings Pressure Ratings Up to 20,000 psig (1,378 bar)

Threaded Copper Tee Standards


ASME B16.11 Threaded Tee Fitting: ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799
DIN Npt Threaded Tee: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN Forged Threaded Tee: EN10253-1, EN10253-2

Threaded Equal Tee Material


stainless steel Screwed Tee
  • ASTM A182 F304
  • ASTM A182 F304L
  • ASTM A182 F316L
  • ASTM A182 F317
  • ASTM A182 F317L
  • ASTM A182 F321
  • ASTM A182 F321H
  • ASTM A182 F347
  • ASTM A182 F347H
Incoloy Threaded Fittings Tee Incoloy 800 tees, Incoloy 800H tees, Incoloy 800HT (UNS N08800) tees, Incoloy 825 (UNS N08825) tees
254 Smo Forged Threaded Fittings Tee SMO 254/6Mo tees, UNS S31254 tees, DIN 1.4547 tees
Nimonic Forged Threaded Fittings Tee Nimonic 75 tees, Nimonic 80A tees, Nimonic 90 tees
Carbon Steel Screwed Tee
  • ASTM A105
  • ASME SA105
  • DIN 1.0402
  • DIN 1.0460
  • DIN 1.0619
  • ASTM A105N
  • ASME SA105N
  • ASTM A350 LF2
  • ASME SA350
  • High Yield CS ASTM A694
Aluminium Threaded Equal Tee 5052 /6061/ 6063 / 2017 / 7075 / etc.
Nickel Threaded Equal Tee Nickel 200 tees, Nickel 201 tees
Duplex Threaded Fittings Tee S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Super Duplex Threaded Fittings Tee S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Alloy Steel Forged Screwed Tee
  • ASTM A182 F5
  • ASTM A182 F9
  • ASTM A182 F11
  • ASTM A182 F22
  • ASTM A182 F91
Hastelloy Threaded Equal Tee Hastelloy C276 (UNS N10276) tees, C22 (UNS N06022) tees, C4 tees, C2000 tees, B2 tees, B3 tees, X tees
Monel Threaded Equal Tee Monel 400 (UNS No. N04400) tees, Monel 500 (UNS No. N05500) tees
Alloy 20 Threaded Equal Tee Carpenter® 20 Alloy tees, Alloy 20Cb-3 tees
Titanium npt pipe tee
  • ASTM B381 Titanium Gr. 1
  • ASTM B381 Titanium Gr. 2
  • ASTM B381 Titanium Gr. 4
  • ASTM B381 Titanium Gr. 5
  • ASTM B381 Titanium Gr. 7
Inconel Forged Threaded Tee
  • Inconel 600
  • Inconel 601
  • Inconel 625
  • Inconel 718
  • Inconel x750
Copper Threaded Equal Tee T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Copper Nickel Threaded Equal Tee Copper Nickel 90/10 (C70600 ) tees, Cupro Nickel 70/30 (C71500) tees, UNS C71640 tees
Brass Threaded Equal Tee 3602 / 2604 / H59 / H62 / etc.
Other ASME B16.11 threaded tee material Tin bronze tees, Aluminum bronze tees, Lead bronze tees

Rajtilak Metal is an ISO certified ASME B16.11 Stainless Steel Threaded Tee manufacturer & threaded copper tee distributor in India


Types Of ASME B16.11 Stainless Steel Threaded Tee


1 in. Threaded 150# 316 Stainless Steel Tee

1 in. Threaded 150# 316 Stainless Steel Tee

3/4 x 3/4 x 1/2 in. Female Stainless Steel Threaded Tee

3/4 x 3/4 x 1/2 in. Female Stainless Steel Threaded Tee

1/4 in. 3000# 316L Stainless Steel Threaded Tee

1/4 in. 3000# 316L Stainless Steel Threaded Tee

1/2 x 1/2 x 3/8 in. Threaded x MPT Stainless Steel Run Tee

1/2 x 1/2 x 3/8 in. Threaded x MPT Stainless Steel Run Tee

1/2 in. 3000# 316L Stainless Steel Threaded Straight Tee

1/2 in. 3000# 316L Stainless Steel Threaded Straight Tee

1-1/4 in. 304 Stainless Steel Threaded Tee

1-1/4 in. 304 Stainless Steel Threaded Tee

1 in. 3000# 316L Stainless Steel Threaded Tee

1 in. 3000# 316L Stainless Steel Threaded Tee

1-1/2 x 1-1/2 x 3/4 in. 3000# 316L Stainless Steel NPT Tee

1-1/2 x 1-1/2 x 3/4 in. 3000# 316L Stainless Steel NPT Tee

1 in. Sch. 10 304L Stainless Steel Tee

1 in. Sch. 10 304L Stainless Steel Tee

1 x 1 x 3/4 in. 304L 304L Stainless Steel Threaded Tee

1 x 1 x 3/4 in. 304L 304L Stainless Steel Threaded Tee

1-1/4 in. 317L Stainless Steel Threaded Tee

1-1/4 in. 317L Stainless Steel Threaded Tee

1/2 in. Threaded Stainless Steel Tee

1/2 in. Threaded Stainless Steel Tee


We are well-known as a trusted Manufacturer of SS Threaded Tee & ASME B16.11 Stainless Steel Threaded Tee in Mumbai, India. Rajtilak Metal is a Govt. approved certified Stockist of ASME B16.11 Screwed Tee in India, We have our Npt Threaded Tee distributor and Alloy Steel Forged Screwed Tee wholesaler in Malaysia, Brass Threaded Tee for Indonesia, Singapore, United Arab Emirates (UAE) & South Africa.


SS Threaded Tee Dimensions


ASME B16.11 SS Threaded Tee Dimensions

Npt Tee Class 2000 Dimensions


NPS Min Length of Thread Outside Dia of Band
D
Center to End
A
Min
WT
B J
1/2 10.9 13.6 33 28 3.18
3/4 12.7 13.9 38 33 3.18
1 14.7 17.3 46 38 3.68
1.1/4 17 18 56 44 3.89
1.1/2 17.8 18.4 62 51 4.01
2 19 19.2 75 60 4.27
2.1/2 23.6 28.9 92 76 5.61
3 25.9 30.5 109 86 5.99
4 27.7 33 146 106 6.55

Brass Threaded Tee Class 3000 Dimensions


NPS Min Length of Thread Outside Dia of Band
D
Center to End
A
Min
WT
B J
1/2 10.9 13.6 38 33 4.09
3/4 12.7 13.9 46 38 4.32
1 14.7 17.3 56 44 4.98
1.1/4 17 18 62 51 5.28
1.1/2 17.8 18.4 75 60 5.56
2 19 19.2 84 64 7.14
2.1/2 23.6 28.9 102 83 7.65
3 25.9 30.5 121 95 8.84
4 27.7 33 152 114 11.18

All of our Threaded Male Tee Fittings is made and tried to worldwide guidelines, and specifications as per ASME, ANSI & ASTM, etc. We have our Manufacturing Unit and Dealers in Gujarat, Gurgaon, Forged Barred Tee for Rajkot, Karnataka, Raipur, Ahmedabad, Pune, Chennai, Indore, Kolkata, Delhi, Forged Steel Tee for Nagpur, Tamil Nadu, Karnataka, Uttar Pradesh, Faridabad, Khopoli, Threaded Copper Tee for Madhya Pradesh, Jaipur, SS Threaded Tee for Ghaziabad, Haryana, Vadodara, West Bengal, Rajasthan, Bhosari, Brass Threaded Tee for Bangalore, Punjab, Ludhiana, Aurangabad, Forged Lateral Tee for Kolhapur, Chhattisgarh. We are ASME B16.11 Stainless Steel Threaded Tee Manufacturer and Exporter of ANSI B16.11 Forged Threaded Tee, Threaded Unequal Tee in Mumbai, India.


Threaded Copper Tee Class 6000 Dimensions


NPS Min Length of Thread Outside Dia of Band
D
Center to End
A
Min
WT
B J
1/2 10.9 13.6 46 38 8.15
3/4 12.7 13.9 56 44 8.53
1 14.7 17.3 62 51 9.93
1.1/4 17 18 75 60 10.59
1.1/2 17.8 18.4 84 64 11.07
2 19 19.2 102 83 12.09
2.1/2 23.6 28.9 121 95 15.29
3 25.9 30.5 146 106 16.64
4 27.7 33 152 114 18.67

General notes:

  • Dimensions are in millimeters unless otherwise indicated.
  • Dimension B is minimum length of perfect thread.
    The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than J.

Stainless Steel Threaded Tee Weight Chart


Class 2000 Nominal Pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4
F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8
Wt 0.188 0.236 0.435 0.740 1.058 1.375 1.740 2.883 7.750 11.313 19.125

Class 3000
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6
F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8
Wt 0.250 0.290 0.500 0.750 1.188 1.988 2.235 3.000 4.930 7.375 13.588 19.063

Class 6000
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
B 1 1/6 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 5 3/4
F 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8
Wt 0.250 0.640 0.500 1.438 2.188 2.785 4.688 5.750 9.500 15.000 30.563

ASME B16.11 threaded tee Threads:


  • NPT : National Pipe Thread Taper
  • FPT, FNPT, NPT(F)* Female or internal tapered pipe threads
  • ISO 7-1: Pipe Threads where Pressure-Tight Joints are made on the Threads
  • DIN 158: Metric External Taper Screw Threads and Mating Internal Parallel Screw Threads
  • MPT, MNPT, NPT(M) Male or external tapered pipe threads
  • BSPT: British Standard Pipe Taper
  • BS 21: British Standard Pipe Taper
  • DIN 2999: Pipe Threads for Tubes and Fittings
  • PT: Japanese Industrial Standard (JIS) Tapered Pipe Thread

We produce ASTM A182 SS Threaded Tees in below two most common standards for tapered threads


  • BSPT British Standard Pipe Taper Thread Threaded Fittings Tee
  • NPT American National Standard Taper Pipe Thread Threaded Equal Tee

Why use BSPT pipe tee?


  • Compare to NPT NPT Forged Threaded Tee BSPT threads have rounded peaks and valleys
  • BSPT threads have an angle of 55°

Why use NPT Forged Threaded Tee?


  • NPT threads also have flattened peaks and valleys
  • threaded tee fittings NPT threads have an angle of 60°

Our Gas And Oil Industry Clientele In Worldwide


Khulud Tight Gas Project

Khulud Tight Gas Project,
Yibal, Oman

Zuluf Field Expansion Project

Zuluf Field Expansion Project,
Arabian Gulf, Offshore Saudi Arabia (KSA)

Abu Dhabi Gas Distribution Network Pipeline Project

Abu Dhabi Gas Distribution Network Pipeline Project,
Abu Dhabi, United Arab Emirates (UAE)

Bul Hanine Redevelopment

Bul Hanine Redevelopment,
Qatari Coastline, Qatar

Kakinada Petrochemical Cluster Project, Andhra Pradesh

Kakinada Petrochemical Cluster Project, Andhra Pradesh
Godavari, Andhra Pradesh

Refinery and Petrochemical Integrated Development (RAPID)

Refinery and Petrochemical Integrated Development (RAPID), Malaysia
Pengerang, Malaysia

ExxonMobil’s Singapore Refinery, Singapore <br />

ExxonMobil’s Singapore Refinery, Singapore
Jurong, Singapore

Ras Tanura Refinery, Saudi Arabia

Ras Tanura Refinery, Saudi Arabia
Jubail, Saudi Arabia

Offshore Gas Field Expansion, Qatar

Offshore Gas Field   Expansion, Qatar
Qatar Peninsula, Qatar

JG Summit Petrochemical Complex Expansion, Philippines

JG Summit Petrochemical Complex Expansion, Philippines
Batangas City, Philippines

Rayong Refinery Construction, Thailand

Rayong Refinery Construction, Thailand
Rayong, Thailand

Korea Western Power Taean, South Korea

Korea Western Power Taean
831 Bangal-ri, Wonbuk-myeon, Taean-gun, Chungcheongnam-do, South Korea


Looking to buy BS 3799 Npt Pipe Tee? contact Rajtilak Metal, A Reliable ISO/ NPT 3000 lbs CS Screwed Tee supplier in India, Exporter Of NPT 3000 lbs Forged Threaded Tee, View ANSI B16.11 Forged Threaded Tee Weight, We stock and supply B16.11 Copper Nickel Threaded Lateral Tee, Purchase En 10241 Ductile Iron Forged Barred Tee Best Price & Fast Delivery.

Class 3000 Aluminium Threaded Iron Tee Manufacturer, View Our Complete Range Of MSS SP-83 Cast Iron Threaded Straight Tee, Visit 1/2 Inch Threaded Tee factory in India, Contact US for 3000LB Threaded Equal Tee instant delivery, Stocking Distributor Of BS3799 Screwed Forged Equal Tee, We Supply Large Amount Of ANSI B16.11 Forged Threaded Tee stock World Wide At Best Price.

Looking to buy ASME B16.11 Forged Threaded Tee at the best cost in India. You can mail to info@rajtilakmetal.com for Nickel Alloy 200 Equal Tee to induce live quotes now. Rajtilak Metal is a ASME B16.11 Stainless Steel Threaded Tee manufacturer and supplier of 3/4 threaded copper tee offering in all Ratings up to 3000#, built a distribution network with more then 15 countries globally like Malaysia, India, 3 inch threaded tee for Thailand, Forged Barred Tee for Vietnam, Indonesia, Saudi Arabia (KSA), Singapore, Kuwait, Qatar, Philippines, United Arab Emirates (UAE), South Africa, UK, Oman, Bahrain.