Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

Stainless Steel Threaded Reducing Tee

Check 3000# Threaded Reducing Tee ASME B16.11 Dimensions Chart And Forged Steel Screwed Unequal Tees Weight Chart.

Threaded Reducing Tee

Threaded Reducing Tee

Stainless Steel Threaded Reducing Tee

Stainless Steel Threaded Reducing Tee

Carbon Steel Threaded Reducing Tee

Carbon Steel Threaded Reducing Tee

ASME B16.11 Screwed Unequal Tee

ASME B16.11 Screwed Unequal Tee

Copper Nickel Threaded Tee

Copper Nickel Threaded Tee

ANSI B16.11 NPT Reducing Tee

ANSI B16.11 NPT Reducing Tee

What Is Threaded Reducing Tee?


ASME B16.11 Threaded Fittings

What Is Threaded Reducing Tee?

Threaded reducing tee dimensions range from ½ inches to 48 inches depending on the standards. The ASME B16.11 threaded reducing tee is of a standard that has fittings up to 4 inches of nominal diameters only. The reducing tees are very common in this range of diameter. The threaded reducing tee sizes can differ according to the need and the nominal sizes of the pipes that are used. The reducing tee reduces the diameter of a pipeline system. It is a combination of a reducing connector and an elbow or a bend. The directional change is mostly 90 degrees in the tees.


What Is The Pressure Rating Of Forged Steel Threaded Reducing Tee?

The British standard Threaded Bsp Fittings are measured and selected according to the Class 3000 Threaded Fittings Dimensions. The material makes such as Stainless Steel Npt Threaded Fittings and the pressure containment capacities such as the Stainless Steel Threaded Pipe Fittings help clients choose from a variety of fittings. The carbon steel threaded pipe fittings pressure rating can differ according to the pressure classes, the type of fitting and the composition material.



Carbon Steel Threaded Reducing Tee Use In Oil And Gas Refineries?

The national standards mandate the npt reducing tee to comply with international standards so as to facilitate import and export without confusion. The stainless steel reducing tee npt can either be equal or unequal. Equal means two openings are equal and one is different; usually the smaller sized end. Threaded Unequal Tee Dimensions vary according to the Forged Screwed Unequal Tee piping network. The Forged Threaded Reducing Tee is forged to be stronger. The ASTM A182 SS Threaded Unequal Tees are stronger as well because of their production material. The uses include most applications where piping is used such as water lines, oil and gas refineries, chemical plants, heat exchangers etc.


Carbon Steel Threaded Reducing Tee Material Specification, PED Approved ASTM A105/ A350 Lf2 Screwed Unequal Tees Manufacturer in India.

Threaded Reducing Tee Dimensions


Threaded Reducing Tee Dimensions

Threaded Reducing Tee Dimensions

Class 2000 Threaded Unequal Tee Dimensions In Inches


Normal Pipe Sizes Minimum Length of Thread Outside Diameter of Band
D
Center to End
A
Minimum
Weight
B J
1/2 10.9 13.6 33 28 3.18
3/4 12.7 13.9 38 33 3.18
1 14.7 17.3 46 38 3.68
1.1/4 17 18 56 44 3.89
1.1/2 17.8 18.4 62 51 4.01
2 19 19.2 75 60 4.27
2.1/2 23.6 28.9 92 76 5.61
3 25.9 30.5 109 86 5.99
4 27.7 33 146 106 6.55

Class 3000 Threaded Unequal Tee Dimensions In Millimeter


Normal Pipe Sizes Minimum Length of Thread Outside Diameter of Band
D
Center to End
A
Minimum
Weight
B J
1/2 10.9 13.6 38 33 4.09
3/4 12.7 13.9 46 38 4.32
1 14.7 17.3 56 44 4.98
1.1/4 17 18 62 51 5.28
1.1/2 17.8 18.4 75 60 5.56
2 19 19.2 84 64 7.14
2.1/2 23.6 28.9 102 83 7.65
3 25.9 30.5 121 95 8.84
4 27.7 33 152 114 11.18

Class 6000 Threaded Unequal Tee Dimensions In Kilogram


NPS Min Length of Thread Outside Dia of Band
D
Center to End
A
Min
WT
B J
1/2 10.9 13.6 46 38 8.15
3/4 12.7 13.9 56 44 8.53
1 14.7 17.3 62 51 9.93
1.1/4 17 18 75 60 10.59
1.1/2 17.8 18.4 84 64 11.07
2 19 19.2 102 83 12.09
2.1/2 23.6 28.9 121 95 15.29
3 25.9 30.5 146 106 16.64
4 27.7 33 152 114 18.67

ISO/ NPT 6000 LBS Threaded Pipe Reducing Tee Size Chart, Check ASTM A182 304L/ 316L Screwed Tees At Low Price If Buying In India.


Spec Chart Of Screwed Unequal Tee


Specification : Threaded Reducing Tee
Material Stainless Steel (ASTM-182)
Carbon Steel (ASTM-105)
Alloy Steel (ASTM-182)
Low Alloy Steel (ASTM-350)
Duplex Steel
Cooper Nickel
Thread Connections ASME B16.34 (Valves — Flanged), ASME B16.39 (Malleable Iron Pipe Unions, 150#, 250#, Or 300#), ASME B16.11 (Socket Welding and Threaded), MSS-SP-83 (Class Unions), ASME B16.3 (Malleable Iron Fittings), ASME B16.4 ( Gray Iron Fittings), ASME B16.39 (Malleable Iron Unions).
Standards MSS-SP-97 (Threadolet), MSS-SP-83 (Union), ASME B36.19 (Nipple), ASME B16.11 (American Standard), Bs3799, MSS SP 79, JIS B2302
Types Of Thread BSPT, PF, PT, NPT, BSPP, MPT
Applications Oil and Gas
Power station
Water Pipeline
Chemical
Noncritical Applications
Fire Protection
Advantages Simple Usage
Easy installation
Economic as cheaper
Size Threaded Fittings = ½” – 4”
Pressure Rating Threaded Fittings = Class 2000, Class 3000, Class 6000
Type Of Pipe systems 45 Deg Elbow, Equal tee, Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee.

Temperature Ratings Of ASME/ ANSI B16.11 NPT Reducing Tee, Call Now To Get Hastelloy C22 Forged Threaded Reducing Tees.

Stainless Steel Threaded Reducing Tee Weight Chart According to ASME B16.11


2000# NPS 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4
F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8
Weight 0.188 0.236 0.435 0.740 1.058 1.375 1.740 2.883 7.750 11.313 19.125

3000#
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6
F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8
Weight 0.250 0.290 0.500 0.750 1.188 1.988 2.235 3.000 4.930 7.375 13.588 19.063

6000#
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
B 1 1/6 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 5 3/4
F 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8
Weight 0.250 0.640 0.500 1.438 2.188 2.785 4.688 5.750 9.500 15.000 30.563

We Supply Large Amount Of Copper Nickel/ Alloy Steel/ Brass/ Copper Threaded Reducing Tee Stock World Wide At Best Price In India.

ASME B16.11 Threaded Reducing Tee Price


Size Class Material Price In India
1 X 1/2 NPS Class 3000 ASTM A105N 189.7
2 X 1 NPS Class 3000 ASTM A350 Lf2 250.65
3/4 x 1/2 NPS Class 6000 ASTM A105N 326.8
3/4 x 1/2 NPS Class 3000 ASTM A105N 280

Please note this is an approx Price of Threaded Reducing Tee in India. For final Carbon Steel Threaded Reducing Tee Price List Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.


ASME B16.11 Reducing Threaded Tee

NPT Reducing Tee Pressure Test

Threaded Reducing Tee Pressure-Temperature 
Temperature Class
150 300
1/4 - 1 inch. 1 1/4 - 2 inch. 2 1/2 - 3 inch.
(oF) (oC)
-20 to 150 -29 to 66 300 2000 1500 1000
200 93 265 1785 1350 910
250 121 225 1575 1200 825
300 149 185 1360 1050 735
350 177 150 1150 900 650
400 204 - 935 750 560
450 232 - 725 600 475
500 260 - 510 450 385
550 288 - 300 300 300

Various Types Of Threaded Reducing Tee


ANSI B16.11, 2×3 Inch, 6000LB, Stainless Steel Threaded Reducing Tee

ANSI B16.11, 2×3 Inch, 6000LB, Stainless Steel Threaded Reducing Tee

ASTM A105, 3 Inch, Class 3000, Carbon Steel Threaded Reducing Tee

ASTM A105, 3 Inch, Class 3000, Carbon Steel Threaded Reducing Tee

ASTM A105, 3000 LB, 2 * 1-1/2 Inch, Threaded Reducing Tee

ASTM A105, 3000 LB, 2 * 1-1/2 Inch, Threaded Reducing Tee

ASTM A182 F304L, 2 Inch, CL9000, Forged Screwed Unequal Tee

ASTM A182 F304L, 2 Inch, CL9000, Forged Screwed Unequal Tee


SA105, 2×2 Inch, Class 2000, FNPT, Forged Screwed Unequal Tee

SA105, 2×2 Inch, Class 2000, FNPT, Forged Screwed Unequal Tee

CL3000, DN25, NPT, ASME B16.11, SS Threaded Unequal Tees

CL3000, DN25, NPT, ASME B16.11, SS Threaded Unequal Tees

1 1/2 Inch, 150 LB, B16.11, Stainless Steel Threaded Reducing Tee

1 1/2 Inch, 150 LB, B16.11, Stainless Steel Threaded Reducing Tee

ASTM A350, 2 x 2 Inch, 2000 LB, FNPT, Forged Threaded Unequal Tee

ASTM A350, 2 x 2 Inch, 2000 LB, FNPT, Forged Threaded Unequal Tee


1/2 Inch, 6000 LB, BS3799, Screwed Forged Unequal Tees

1/2 Inch, 6000 LB, BS3799, Screwed Forged Unequal Tees

ANSI B16.11, 1 1/2 X 1 Inch, Class 3000, Stainless Steel Threaded Reducing Tees

ANSI B16.11, 1 1/2 X 1 Inch, Class 3000, Stainless Steel Threaded Reducing Tees

ASTM A105, 1x3/4 Inch, CL9000, Hastelloy C22 Forged Pipe Tees

ASTM A105, 1x3/4 Inch, CL9000, Hastelloy C22 Forged Pipe Tees

2000 LB, 2 × 2 Inch, FNPT Ends, Copper Nickel Threaded Tees

2000 LB, 2 × 2 Inch, FNPT Ends, Copper Nickel Threaded Tees



About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Rajtilak Metal © 2021 All Right Reserved. Website Designed And SEO by Mesotek
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy