Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

ASME B16.11 Threaded Cross

Refer Stainless Steel Threaded Equal And Unequal Cross Dimensions Chart.

ASME B16.11 Threaded Cross

ASME B16.11 Threaded Cross

Threaded Cross Pipe Fitting

Threaded Cross Pipe Fitting

Stainless Steel Threaded Cross

Stainless Steel Threaded Cross

ANSI B16.11 NPT Cross

ANSI B16.11 NPT Cross

Screwed Equal Cross

Screwed Equal Cross

Forged Threaded Unequal Cross

Forged Threaded Unequal Cross

ASME B16.11 Threaded Fittings


ASME B16.11 Threaded Fittings

What Is Cross Threaded?

ASME B16.11 Threaded Cross is a type of pipe fitting where four pipes are connected in one point. The cross is also known as a four way fitting. Most Stainless Steel threaded cross usually have female threads on them and are attached to male threaded pipes. The threaded cross dimensions are determined by the connecting pipes, standards and other specifications. ASME B16.11 threaded cross pipe fitting can be equal or unequal. The Threaded Equal Cross Dimensions are determined mainly by the nominal size of the connecting pipes whereas the unequal cross dimensions are complex.


How To Remove A Cross Threaded Bolt?

Material differences such as the carbon steel threaded cross also are important as the cross connection is not much stable mechanically in a fluid flow because it could over-determine the resulting plane when four directions of fluid flow are involved. Also the screw threaded cross is expensive than two tee connections which can produce and equal function. There are national standards such as the npt cross to govern the dimensions and properties of the npt cross section. There are different classes such as the 1/4 npt cross in the range of npt cross fitting. The Screwed Cross fitting is not very common in domestic piping.


What Is The Use Of Stainless Steel Threaded Cross?

It is used in places where other types of fittings are not possible for various reasons. It also gives immense physical pressure at the joint due to the fluid mechanics. So high strength crosses like the ASTM A182 SS Threaded Cross are used if crosses are to be used. To increase the strength, durability and corrosion resistance, the Alloy Steel Forged Screwed Cross can also be used. The Forged Threaded Cross is forged and can have much stability than ordinary ones. Threaded Fittings Cross is used in hot liquid passage systems but is very unstable to thermal expansion. Screwed Equal Cross is the most used where the unequal ones are also used in special cases.


Check Threaded Cross Pipe Fitting Weight Chart And One of India’s largest Manufacturer Of ANSI B16.11 Brass Screwed Cross In India.

ASME B16.11 Threaded Cross Dimensions


ASME B16.11 Threaded Cross Dimensions

Class 2000 Threaded Equal Cross Dimensions With Weight


Normal Pipe Sizes Minimum Length of Thread Outside Diameter of Band
D
Center to End
A
Minimum
Weight
B J
1/2 10.9 13.6 33 28 3.18
3/4 12.7 13.9 38 33 3.18
1 14.7 17.3 46 38 3.68
1.1/4 17 18 56 44 3.89
1.1/2 17.8 18.4 62 51 4.01
2 19 19.2 75 60 4.27
2.1/2 23.6 28.9 92 76 5.61
3 25.9 30.5 109 86 5.99
4 27.7 33 146 106 6.55

Class 3000 Threaded Equal Cross Dimensions In Millimeter


Normal Pipe Sizes Minimum Length of Thread Outside Diameter of Band
D
Center to End
A
Minimum
Weight
B J
1/2 10.9 13.6 38 33 4.09
3/4 12.7 13.9 46 38 4.32
1 14.7 17.3 56 44 4.98
1.1/4 17 18 62 51 5.28
1.1/2 17.8 18.4 75 60 5.56
2 19 19.2 84 64 7.14
2.1/2 23.6 28.9 102 83 7.65
3 25.9 30.5 121 95 8.84
4 27.7 33 152 114 11.18

Class 6000 Threaded Equal Cross Dimensions In Kilogram


Normal Pipe Sizes Minimum Length of Thread Outside Diameter of Band
D
Center to End
A
Minimum
Weight
B J
1/2 10.9 13.6 46 38 8.15
3/4 12.7 13.9 56 44 8.53
1 14.7 17.3 62 51 9.93
1.1/4 17 18 75 60 10.59
1.1/2 17.8 18.4 84 64 11.07
2 19 19.2 102 83 12.09
2.1/2 23.6 28.9 121 95 15.29
3 25.9 30.5 146 106 16.64
4 27.7 33 152 114 18.67

High-Quality ASTM A105 Carbon Steel Threaded Cross Manufacturer In India, Contact Us For Aluminum Screwed Unequal Cross Instant Delivery.

Specification List Of Npt Cross


Specification : Threaded Cross
Standards Bs3799, MSS SP 79, JIS B2302, ASME B16.11 (American Standard), MSS-SP-97 (Threadolet), MSS-SP-83 (Union), ASME B36.19 (Nipple)
Types Of Thread BSPT, PF, NPT, BSPP, PT, MPT
Applications Chemical
Power station
Oil and Gas
Water Pipeline
Noncritical Applications
Fire Protection
Advantages Easy installation
Simple Usage
Economic as cheaper
Type Of Pipe systems Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple, 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee.
Material Stainless Steel (ASTM-182)
Alloy Steel (ASTM-182)
Low Alloy Steel (ASTM-350)
Carbon Steel (ASTM-105)
Duplex Steel
Cooper Nickel
Thread Connections ASME B16.3 (Malleable Iron Fittings), ASME B16.4 ( Gray Iron Fittings), ASME B16.39 (Malleable Iron Unions), ASME B16.34 (Valves — Flanged), ASME B16.39 (Malleable Iron Pipe Unions, 150#, 250#, Or 300#), ASME B16.11 (Socket Welding and Threaded), MSS-SP-83 (Class Unions).
Size Threaded Fittings = ½” – 4”
Pressure Rating Threaded Fittings = Class 2000, Class 3000, Class 6000

Threaded Cross Price List


Size Class Material Price In US ($)
1/8 NPS Class 1000 Sa-105 $5.76
1/2 NPS Class 3000 SA-105 $3.7
DN 1/2 NPS Class 3000 A105 $2.79
4 1/4 NPS Class 3000 A105 $5.72

Please note this is an approx Price of ASME B16.11 Threaded Cross in India. For final Screwed Cross Price List Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.


ASME B16.11 Stainless Steel Threaded Cross

3000# High Pressure Forged Threaded Cross Pressure Rating Table, Compare Prices Before You Buy BS 3799 Screwed Equal Crosses In India.

Screwed Equal Cross Pressure Rating

Threaded Cross Pressure-Temperature
Temperature Class
150 300
1/4 - 1 inches 1 1/4 - 2 inches 2 1/2 - 3 inches
(oF) (oC)
-20 to 150 -29 to 66 300 2000 1500 1000
200 93 265 1785 1350 910
250 121 225 1575 1200 825
300 149 185 1360 1050 735
350 177 150 1150 900 650
400 204 - 935 750 560
450 232 - 725 600 475
500 260 - 510 450 385
550 288 - 300 300 300

We Provide ANSI / ASME B16.11 NPT, ISO/BSP, SAE Threads Class 6000 Threaded Equal And Unequal Cross Expert Cutting Service.

Screwed Unequal Cross Tolerance Formula

ANSI B16.11 American Standard Dimensional Tolerances
"A" - Threaded Center To BottomFor Size
1/8" And 1/4"
± 0.03"
3/8", 1/2" And 3/4"± 0.06"
1", 1-1/4", 1-1/2" And 2"± 0.08"
2-1/2", 3", And 4"± 0.10"
"B" - Threaded Bore DiameterFor Size
1-1/2" And Smaller
+ 0.020"
- 0.000"
2", 2-1/2", 3" And 4"+ 0.025"
- 0.000"
"C" - Threaded Wall Thick.Min. = 1.09 T (But Not Less Than 5/32")
T = Wall Thickness Of Nominal Pipe Sizes
"D" - Bore Diameter Of Pipe FittingFor Size
2" And Smaller
± 0.030"
2-1/2", 3" And 4"± 0.060"
"E" - Threadeds- Bottom To Bottom - Full CouplingsFor Size
1/8" And 1/4"
± 0.06"
3/8", 1/2" And 3/4"± 0.12"
1", 1-1/4", 1-1/2" And 2"± 0.16"
2-1/2", 3", And 4"± 0.20"
"F" - Bottom Of Threaded To Opposite Face - ANSI B16.11 Half CouplingsFor Size
1/8" And 1/4"
± 0.03"
3/8", 1/2" And 3/4"± 0.06"
1", 1-1/4", 1-1/2" And 2"± 0.08"
2-1/2", 3", And 4"± 0.10"
"G" - Gap Of WeldingApprox. 0.06"
Before Welding Recommended Gap
"H" - Min. FlatMin. Flat = 0.75 X Min.
Threaded Wall Thick.

Threaded Cross Pipe Fitting Weight Chart


2000# NPS (Normal Pipe Sizes) 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
A 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 3 3/8 4 3/16
B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4
Weight 0.500 0.460 0.777 1.125 1.688 2.450 3.188 5.560 16.438 19.500 32.688

3000#
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
A 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2
B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6
Weight 0.438 0.567 0.970 1.500 2.500 3.620 4.125 6.500 8.125 16.750 25.675 32.000

6000#
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
A 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 3/16 4 1/2
B 1 1/6 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 5 3/4 6
Weight 0.563 1.188 1.500 2.750 4.313 6.625 10.750 11.500 22.188 27.500 54.000 43.500

Common Types Of ASME B16.11 Threaded Cross


1/3 Inch, 9000#, ASME B16.11 Threaded Cross

1/3 Inch, 9000#, ASME B16.11 Threaded Cross

2 Inch, ASME B16.11, 150 LB, Threaded Cross Pipe Fittings

2 Inch, ASME B16.11, 150 LB, Threaded Cross Pipe Fittings

DN25, CL3000, A182 F304, Stainless Steel Threaded Cross

DN25, CL3000, A182 F304, Stainless Steel Threaded Cross

2×2 Inch, FNPT, 2000 LB, Alloy Steel Forged Screwed Cross

2×2 Inch, FNPT, 2000 LB, Alloy Steel Forged Screwed Cross


2 Inch, ASME B16.11, NPT, Forged Threaded Cross

2 Inch, ASME B16.11, NPT, Forged Threaded Cross

3 Inch, ASTM A105, 3000 LB, Screwed Unequal Cross

3 Inch, ASTM A105, 3000 LB, Screwed Unequal Cross

ASTM A350, 2×3 Inch, 3000LB, Threaded Unequal Cross

ASTM A350, 2×3 Inch, 3000LB, Threaded Unequal Cross

3/4 Inch, ASTM A105, 3000#, Hastelloy C22 Pipe Cross

3/4 Inch, ASTM A105, 3000#, Hastelloy C22 Pipe Cross

2 X 1/2 Inch, CL3000, Stainless Steel Threaded Cross

2 X 1/2 Inch, CL3000, Stainless Steel Threaded Cross



About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Rajtilak Metal © 2021 All Right Reserved. Website Designed And SEO by Mesotek
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy