ASME B16.11 Elbow

Check 45 Degree Threaded Elbow Dimensions In Class 2000/ 3000/ 6000.

ASME B16.11 Elbow

ASME B16.11 Elbow

45 Degree Threaded Elbow

45 Degree Threaded Elbow

Stainless Steel Threaded 45 Deg Elbow

ANSI B16.11 1/8 Npt 45 Elbow

ASME B16.11 Screwed 45 Degree Elbow

ASME B16.11 Screwed 45 Degree Elbow

Carbon Steel Threaded 45 Deg Elbow

Carbon Steel Threaded 45 Deg Elbow

ANSI B16.11 1/8 Npt 45 Elbow

Stainless Steel Threaded 45 Deg Elbow

What Is A Threaded Elbow?


45 Degree Threaded Elbow Use In Connecting Pipes?

What Is A Threaded Elbow?

Screwed Elbow are different specific types of elbows. 45 Degree Threaded Elbow differ according to the standards and use cases but their angle is denoted as 45 degree for the change of direction in fluid flow. Threaded Elbow Dimensions mainly depend on the connecting pipes and the radius of the curvature. The standards differ such as the 45 Degree Npt Elbow and the Asme B16.11 Threaded Elbow Fittings. The Asme B16.11 Threaded Elbow Material can differ but the nominal sizes for this standard are up to 4 inches.


45 Degree Threaded Elbow Use In Connecting Pipes?

Threaded 45 Deg Elbow or the 45 Deg Threaded Pipe Elbow has threads to be threaded onto the connecting pipes. In contrast to the most used welding methods, these are connected by threads. Welding is also applied when necessary. The ASME B16.11 Threaded Reducing Elbow has a different function as it reduces the pipe size from one end to the other. Asme B16.11 Gi Threaded Elbow is made up of GI material which is much corrosion resistant. GI stands for galvanized iron which has a coating over the steel to prevent oxidation. Sometimes the Grooved Threaded 45 Deg Elbow types are used; these have grooves and can install gaskets for extra tightness. Internal Threaded 45 Degree Elbow has threads inside the elbow and the pipe will have threads outside to fit onto this type.



Refer Stainless Steel Threaded 45 Deg Elbow Weight Chart According to Manufacturer Of ANSI B16.11 And NPT 45 Degree Street Elbows In India.

Threaded 45 Deg Elbow Joint, Ms Threaded 45 Deg Elbow or the Stainless Steel Threaded 45 Deg Elbow could be used interchangeably. Npt Threaded Elbow comes under the national standards. Threaded Elbow Weight can differ with type and material; the Threaded Long Radius Elbow is heavier because of the longer radius. Ss Threaded 45 Degree Elbow is mostly used in low pressure systems. Short Radius Threaded 45 Degree Elbow has a shorter radius and is useful in narrow space operations. A105 Threaded 45 Degree Elbow is made up of A105 alloy and it is much corrosion resistant but the Brass Threaded 45 Degree Elbow is resistant to chloride ion corrosion cracking. In applications where the requirement mandates, the Threaded Conduit Elbow, the Gi Threaded Elbow or the type Elbow Threaded Grooved can be used.

EIL Approved Carbon Steel 45 Degree NPT Elbow Manufacturer In India, Temperature Ratings Of 45° Threaded Reducing Elbows.

What is ASME B16.11 45 Degree NPT Elbow

Npt 45 Degree Street Elbow Brass are made up of brass to reduce corrosion and to make them low cost to be applied in low cost systems. Threaded Elbow Class 150 and the Threaded Elbow Class 3000 are two examples of their pressure classes.


ASME B16.11 Elbow Dimensions


ASME B16.11 Elbow Dimensions

Class 2000 Threaded 45 Elbow Dimensions


Normal Pipe Sizes Minimum Length
of Thread
Outside Diameter
of Band
Minimum
Weight
Center to End
B J D G 45°
C
1/2 10.9 13.6 33 3.18 22
3/4 12.7 13.9 38 3.18 25
1 14.7 17.3 46 3.68 28
1.1/4 17 18 56 3.89 33
1.1/2 17.8 18.4 62 4.01 35
2 19 19.2 75 4.27 43
2.1/2 23.6 28.9 92 5.61 52
3 25.9 30.5 109 5.99 64
4 27.7 33 146 6.55 79

Class 3000 Threaded 45 Elbow Dimensions


Normal Pipe Size Minimum Length
of Thread
O.D. Outside Daimeter
of Band
Minimum
Weight
Center to End
B J D G 45 Degree
C
1/2 10.9 13.6 38 4.09 25
3/4 12.7 13.9 46 4.32 28
1 14.7 17.3 56 4.98 33
1.1/4 17 18 62 5.28 35
1.1/2 17.8 18.4 75 5.56 43
2 19 19.2 84 7.14 44
2.1/2 23.6 28.9 102 7.65 52
3 25.9 30.5 121 8.84 64
4 27.7 33 152 11.18 79

ANSI / ASME B16.11 Screwed Elbow Available in A Wide Range Of Grades Or Shape And Material.

Class 6000 Threaded 45 Elbow Dimensions


Normal Pipe Sizes Minimum Length
of Thread
Outside Daimeter
of Band
Minimum
Weight
Center to End
B J D G 45 Degree
C
1/2 10.9 13.6 46 8.15 28
3/4 12.7 13.9 56 8.53 33
1 14.7 17.3 62 9.93 35
1.1/4 17 18 75 10.59 43
1.1/2 17.8 18.4 84 11.07 44
2 19 19.2 102 12.09 52
2.1/2 23.6 28.9 121 15.29 64
3 25.9 30.5 146 16.64 79
4 27.7 33 152 18.67 79

Threaded 45 Deg Elbow Price List


Size Class Type Material Price In India
1 NPS 6000# ASTM A105 187.47
1-1/2 NPS 3000# ASTM A105 76.89
1/2 NPS 3000# ASTM A105N 78.98
3/4 NPS 6000# ASTM A105N 120
2 NPS 3000# A06E 260.5

Please note this is an approx Price of 45 Deg Threaded Elbow in India. For final ASME B16.11 Elbow Price List Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.



Most Frequent Types Of NPT 3000 LBS Grooved Screwed 45 Degree Elbow, Check Market Price Before You Buy ASME B16.11 45 Degree Threaded Elbows Fittings In Mumbai, India.

Standard Specification Of Stainless Steel Threaded 45 Degree Elbow


Specification : 45 Degree Threaded Elbow
Standards MSS SP 79, JIS B2302, MSS-SP-97 (Threadolet), MSS-SP-83 (Union), ASME B16.11 (American Standard), Bs3799, ASME B36.19 (Nipple)
Type Of Pipe systems Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple, 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee.
Material Stainless Steel (ASTM-182)
Alloy Steel (ASTM-182)
Low Alloy Steel (ASTM-350)
Carbon Steel (ASTM-105)
Duplex Steel
Cooper Nickel
Thread Connections ASME B16.34 (Valves — Flanged), ASME B16.39 (Malleable Iron Pipe Unions, 150#, 250#, Or 300#), ASME B16.11 (Socket Welding and Threaded), MSS-SP-83 (Class Unions), ASME B16.3 (Malleable Iron Fittings), ASME B16.4 ( Gray Iron Fittings), ASME B16.39 (Malleable Iron Unions).
Types Of Thread NPT, BSPP, BSPT, PF, PT, MPT
Applications Oil and Gas
Chemical
Water Pipeline
Noncritical Applications
Power station
Fire Protection
Advantages Simple Usage
Easy installation
Economic as cheaper
Size Threaded Fittings = ½” – 4”
Pressure Rating Threaded Fittings = Class 2000, Class 3000, Class 6000

45 Degree Npt Elbow Weight Chart


2000LBS NPS 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4
F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8
Weight 0.188 0.236 0.435 0.740 1.058 1.375 1.740 2.883 7.750 11.313 19.125
 

3000LBS
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6
F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8
Weight 0.250 0.290 0.500 0.750 1.188 1.988 2.235 3.000 4.930 7.375 13.588 19.063
 

6000#
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
B 1 1/6 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 5 3/4
F 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8
Weight 0.250 0.640 0.500 1.438 2.188 2.785 4.688 5.750 9.500 15.000 30.563

ASME B16.11 Threaded 45 Deg Elbow Pressure Rating

Threaded 45 Deg Elbow Pressure-Temperature
Temperature Class
150 300
1/4 - 1 inch. 1 1/4 - 2 inch. 2 1/2 - 3 inch.
(oF) (oC)
-20 to 150 -29 to 66 300 2000 1500 1000
200 93 265 1785 1350 910
250 121 225 1575 1200 825
300 149 185 1360 1050 735
350 177 150 1150 900 650
400 204 - 935 750 560
450 232 - 725 600 475
500 260 - 510 450 385
550 288 - 300 300 300

Screwed Elbow Tolerance Chart

ANSI B16.11 American Standard Dimensional Tolerances
"A" - Threaded Center To BottomFor Size
1/8" And 1/4"
± 0.03"
3/8", 1/2" And 3/4"± 0.06"
1", 1-1/4", 1-1/2" And 2"± 0.08"
2-1/2", 3", And 4"± 0.10"
"B" - Threaded Bore DiameterFor Size
1-1/2" And Smaller
+ 0.020"
- 0.000"
2", 2-1/2", 3" And 4"+ 0.025"
- 0.000"
"C" - Threaded Wall Thick.Min. = 1.09 T (But Not Less Than 5/32")
T = Wall Thickness Of Nominal Pipe Sizes
"D" - Bore Diameter Of Pipe FittingFor Size
2" And Smaller
± 0.030"
2-1/2", 3" And 4"± 0.060"
"E" - Threadeds- Bottom To Bottom - Full CouplingsFor Size
1/8" And 1/4"
± 0.06"
3/8", 1/2" And 3/4"± 0.12"
1", 1-1/4", 1-1/2" And 2"± 0.16"
2-1/2", 3", And 4"± 0.20"
"F" - Bottom Of Threaded To Opposite Face - ANSI B16.11 Half CouplingsFor Size
1/8" And 1/4"
± 0.03"
3/8", 1/2" And 3/4"± 0.06"
1", 1-1/4", 1-1/2" And 2"± 0.08"
2-1/2", 3", And 4"± 0.10"
"G" - Gap Of WeldingApprox. 0.06"
Before Welding Recommended Gap
"H" - Min. FlatMin. Flat = 0.75 X Min.
Threaded Wall Thick.


Types Of 45 Degree Threaded Elbow For Sale


1 1/2 Inch, A351 CF8M, Class 150 LB, ANSI B16.11, Screwed Elbow

1 1/2 Inch, A351 CF8M, Class 150 LB, ANSI B16.11, Screwed Elbow

Class 3000, A182 F304L, 1/2 Inch, NPT, 45 Degree Threaded Elbow

Class 3000, A182 F304L, 1/2 Inch, NPT, 45 Degree Threaded Elbow

ASME B16.11, 1 1/2 Inch, Class 3000, Npt 45 Deg Street Elbow Brass

ASME B16.11, 1 1/2 Inch, Class 3000, Npt 45 Deg Street Elbow Brass

2 Inch, 6000LB, A182 F11, B16.11, Threaded Reducing Elbow

2 Inch, 6000LB, A182 F11, B16.11, Threaded Reducing Elbow


1/2 Inch, 3000LB, F304H, ASME B16.11, Internal Threaded Elbow

1/2 Inch, 3000LB, F304H, ASME B16.11, Internal Threaded Elbow

ASTM A182 F316, 1/2 Inch, 9000LB, FNPT Ends, Threaded Long Radius Elbow

ASTM A182 F316, 1/2 Inch, 9000LB, FNPT Ends, Threaded Long Radius Elbow

2000LB, ASME B16.11, 2 Inch, Stainless Steel Threaded Elbow

2000LB, ASME B16.11, 2 Inch, Stainless Steel Threaded Elbow

ASTM A105, 1.5 Inch, NPT Ends, Carbon Steel 45 Deg Threaded Elbow

ASTM A105, 1.5 Inch, NPT Ends, Carbon Steel 45 Deg Threaded Elbows


1 inch, Threaded 125#, Black Cast Iron, Seamless 45 Deg Elbows

1 inch, Threaded 125#, Black Cast Iron, Seamless 45 Deg Elbows

ASME B16.11, PN400, DN80, Brass Threaded Elbows

ASME B16.11, PN400, DN80, Brass Threaded Elbows

Galvanized, ASTM A105, CL3000, 3 Inch, ASME B16.11 45 Deg Threaded Elbows

Galvanized, ASTM A105, CL3000, 3 Inch, ASME B16.11 45 Deg Threaded Elbows

ASTM A350 LF2, DN20, PN400, Threaded Elbows Class 3000

ASTM A350 LF2, DN20, PN400, Threaded Elbows Class 3000



About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy