P235GH Flange

Check P235gh Weld Neck Flange Chemical Composition And En 10216-2 P235Gh Blind Flanges Specification Format.

P235GH Flange

P235GH Flange

Carbon Steel P235gh Flange

Carbon Steel P235gh Flange

Pressure Vessel Steel P235gh Flanges

Pressure Vessel Steel P235gh Flanges


P235GH Flange

What is Pressure Vessel Steel Flanges?

In a normalized condition, these Pressure Vessel Steel flanges are known to have a moderately low thermal conductivity amongst the other wrought carbon steels or non-alloy steels. In addition to this, the P235GH Flange has a moderately high ductile properties as well as a fairly low tensile strength in a normalized condition. A feature of the P235GH Pressure Vessel Steel flanges which has been appreciated by our clients is that this non alloy steel grade is known to be quite a heat resisting material.


P235gh Tc1 Slip On Flange Is Easy To Recognize?

Also referred to as Hubbed Flanges, the p235gh tc1 slip on flange is easy to recognize because of their slim, yet compact shape and because the size of the bore in this flange tends to be larger in comparison to the outside diameter of the connecting pipe. The benefits of using this alloy en 1092-2 Steel p235gh forged flanges is that not only do these flanges prove to have easy access for cleaning and inspection, but they also have room for modification or repairs.


P235gh Tc2 Socket Weld Flange Is Similar To Slip-on?

Although the static strength of the en 10216-2 p235gh tc1 socket weld flange is similar to slip-on flanges, but their fatigue strength tends to be higher because of the presence of a single, as opposed to a double, fillet weld. en 10216-2 p235gh threaded flange is used to join pipes together by screwing a pipe which has a male thread, onto the flange, without the use of seam welds. Threaded p235gh carbon steel flange is a mandatory requirement in explosive areas, for instance gas stations and plants, as the execution of welded connections in these environments would be fatal.


P235gh Chemical Composition

Element / Component Composition %
Carbon ( C ) 0.20 Max
Manganese ( Mn ) 0.50 - 1.30
Phosphorus ( P ) 0.030 maximum
Sulphur ( S ) 0.035 maximum
Silicon ( Si ) 0.35 maximum
Aluminium ( Al ) -
Chromium ( Cr ) -
Copper ( Cu) -
Nitrogen ( N ) -

P235gh Tc2 Mechanical Properties

Grade

P235GH Mechanical Property

Thickness

Yield

Tensilmie

Elongation

Impact Energy(KV J) minimum

P235GH

mm

Minimum Mpa

Mpa

Minimum %

-20°

+20°

≤ 16

235

360-480

24

27

34

40

16> to ≤40

225

360-480

24

27

34

40

40> to ≤60

215

360-480

24

27

34

40

60> to ≤100

200

360-480

24

27

34

40

100> to ≤150

185

350-480

24

27

34

40

150> to ≤250

170

340-480

24

27

34

40


Carbon Steel P235gh Flange Specification List

Material Specification Of : P235GH Flange
Standard Cover : pressure ratings & temperature ratings, materials, marking, dimensions, weight, tolerances, testing
Contact Faces RTJ (Ring Type Joint), FF (Flat Face), RF (Raised Face), T/G (Tongue And Groove ), M/F (Male And Female)
Size Chart Normal Pipe Size 1/2 to NPS 24"
Thickness Normal Pipe Size ≤ 18
Bore Diameter Normal Pipe ≤ 10
Flanges Standards EN 1092-1, JIS, ASME B16.5, ASME B16.47 type A, UNI, DIN
Pressure Rating Class 150 To Class 2500
High Temperature Above 200°C (400°F) For Class 150 Or Above 400°C (750°F)
Low Temperature Above -29 Degree C (−20°F)
Common Types Of Flanges: Slip On (SORF), Weld Neck (WNRF), Blind (BLRF), Lap Joint (Loose), Threaded (NPT), Socket-Weld (SWRF)
Special Types Of Flanges : Nipoflange, Elboflange, Latroflange, Swivel Flange, Expanding Flange, Reducing Flange, Weldoflange
Marking Standard Name of Manufacturer
Schedule
Type of Flange Facing
Nominal Pipe Size
Pressure Class
ASME B16 Designation
Bolt Type high strength bolts
medium strength bolts
low strength bolts
European Standard Flanges JIS B2220 Flanges (5k to 30k) and KS1503 flanges
Russian-Standard Flanges GOST 12820 / 12821-80, DIN, UNI, EN 1092-1
South African Standard Flanges SANSflanges And SABS flanges
Surface Finish smooth, concentric serrated, stock
Gaskets Types Full Face Gasket
Flat Ring Gasket
Metallic Ring Gakset
Advantages Of Pipe Flange Used to Connect Pipe System
Easy Repair Pipe System
Assembled Without Welding

We Are Renowned Carbon Steel P235gh Tc1 Manufacturer In India ASTM Material And Werkstoff P235gh Slip On Flanges Dimensions Chart According to ASME B16.5.


Pressure Vessel Flanges Dimensions

Pressure Vessel Flanges Dimensions


NPS O.D. of Flange Flanges Thickness Diameter of RF Diameter of Hub at Base Lengtd Tdru Hub Bore or Diameter Dia. of Hub at Bevel Radius of Fillet Deptd of Socket
Welding (WN) Neck Slip-On (SORF) Threaded (NPT) Socket (SWRF) Lap Joint (Loose) Slip-on (SORF) Socket (SWRF) Lap Joint (Loose)
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2

Schedule Chart Of En 10216-2 P235gh And P235gh Pipe Flanges Pressure Rating Chart.


En 10216-2 P235gh Tc1 Weight Chart

Nominal Pipe Sizes (NPS) Slip On (SORF) Threaded (NPT) Socket Weld (SWRF) Lap Joint (Loose) Blind (BLRF) Weld Neck (WRNR)
½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
3 3 3 3 4 4
2 5 5 5 5 5 6
8 8 8 8 7 10
3 9 9 9 9 9 11.5
11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268

P235gh Tc1 Blind Flange Pressure Rating Chart

P235GH Flange Pressure Rating Chart
Temperature °F 150# 300# 400# 600# 900# 1500# 2500#
-20 to 100 275 720 960 1440 2160 3600 6000
200 230 600 800 1200 1800 3000 5000
300 205 540 720 1080 1620 2700 4500
400 190 495 660 995 1490 2485 4140
500 170 465 620 930 1395 2330 3880
600 140 435 580 875 1310 2185 3640
650 125 430 575 860 1290 2150 3580
700 110 425 565 850 1275 2125 3540
750 95 415 555 830 1245 2075 3460
800 80 405 540 805 1210 2015 3360
850 65 395 530 790 1190 1980 3300
900 50 390 520 780 1165 1945 3240
950 35 380 510 765 1145 1910 3180
1000 20 320 430 640 965 1605 2675
1050 20 310 410 615 925 1545 2570
1100 20 255 345 515 770 1285 2145
1150 20 200 265 400 595 995 1655
1200 20 155 205 310 465 770 1285
1250 20 115 150 225 340 565 945
1300 20 85 115 170 255 430 715
1350 20 60 80 125 185 310 515
1400 20 50 65 95 145 240 400
1450 15 35 45 70 105 170 285
1500 10 25 35 55 80 135 230

P235gh Tc1 Material Thickness Calculation For Pressure Vessel And Largest En 10217-2 P235gh Weld Neck Flanges Manufacturer In India.

En 10216-2 P235gh Tc2 Slip On Flange Thickness

P235GH Flange Wall Thickness
NPS (Normal Pipe Sizes) Outside Daimeter (O.D.) Schedule 10 Schedule 20 Schedule 30 STD Wall Schedule 40 Schedule 60 EXT Hvy Schedule 80 Schedule 100 Schedule 120 Schedule 140 Schedule 160 XX Hvy
½ 0.84 0.083 ... ... 0.109 0.109 ... 0.147 0.147 ... ... ... 0.188 0.294
¾ 1.05 0.083 ... ... 0.113 0.113 ... 0.154 0.154 ... ... ... 0.219 0.308
1 1.315 0.109 ... ... 0.133 0.133 ... 0.179 0.179 ... ... ... 0.25 0.358
1 ¼ 1.66 0.109 ... ... 0.14 0.14 ... 0.191 0.191 ... ... ... 0.25 0.382
1 ½ 1.9 0.109 ... ... 0.145 0.145 ... 0.2 0.2 ... ... ... 0.281 0.4
2 2.375 0.109 ... ... 0.154 0.154 ... 0.218 0.218 ... ... ... 0.344 0.436
2 ½ 2.875 0.12 ... ... 0.203 0.203 ... 0.276 0.276 ... ... ... 0.375 0.552
3 3.5 0.12 ... ... 0.216 0.216 ... 0.3 0.3 ... ... ... 0.438 0.6
3 ½ 4 0.12 ... ... 0.226 0.226 ... 0.318 0.318 ... ... ... ... 0.636
4 4.5 0.12 ... ... 0.237 0.237 ... 0.337 0.337 ... 0.438 ... 0.531 0.674
5 5.563 0.134 ... ... 0.258 0.258 ... 0.375 0.375 ... 0.5 ... 0.625 0.75
6 6.625 0.134 ... ... 0.28 0.28 ... 0.432 0.432 ... 0.562 ... 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 ...
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 ...
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 ...
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 ...
22 22 0.25 ... ... 0.375 ... ... 0.5 ... ... .... .... .... ....
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 ....
26 26 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
30 30 0.312 0.5 0.625 0.375 .... .... 0.5 .... .... .... .... .... ....
36 36 0.312 0.5 0.625 0.375 0.75 .... 0.5 .... .... .... .... .... ....
40 40 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
42 42 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..
48 48 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..

Werkstoff P235gh Tc1 Weld Neck Flange Bolt Chart

Class 150 Flanges Class 300 Flanges Class 600 Flanges
NPS # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length
1/16 RF RTJ 1/16 RF RTJ 1/4 RF RTJ
1/2 4 0.50 2-1/4 4 0.50 2-1/2 3 4 0.50 3 3
3/4 4 0.50 2-1/2 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1 4 0.50 2-1/2 3 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1-1/4 4 0.50 2-3/4 3-1/4 4 0.63 3-1/4 3-3/4 4 0.63 3-3/4 3-3/4
1-1/2 4 0.50 2-3/4 3-1/4 4 0.75 3-1/2 4 4 0.75 4-1/4 4-1/4
2 4 0.63 3-1/4 3-3/4 8 0.63 3-1/2 4 8 0.63 4-1/4 4-1/4
2-1/2 4 0.63 3-1/2 4 8 0.75 4 4-1/2 8 0.75 4-3/4 4-3/4
3 4 0.63 3-1/2 4 8 0.75 4-1/4 4-3/4 8 0.75 5 5
3-1/2 8 0.63 3-1/2 4 8 0.75 4-1/4 5 8 0.88 5-1/2 5-1/2
4 8 0.63 3-1/2 4 8 0.75 4-1/2 5 8 0.88 5-3/4 5-3/4
5 8 0.75 3-3/4 4-1/4 8 0.75 4-3/4 5-1/4 8 1.00 6-1/2 6-1/2
6 8 0.75 4 4-1/2 12 0.75 4-3/4 5-1/2 12 1.00 6-3/4 6-3/4
8 8 0.75 4-1/4 4-3/4 12 0.88 5-1/2 6 12 1.13 7-1/2 7-3/4
10 12 0.88 4-1/2 5 16 1.00 6-1/4 6-3/4 16 1.25 8-1/2 8-1/2
12 12 0.88 4-3/4 5-1/4 16 1.13 6-3/4 7-1/4 20 1.25 8-3/4 8-3/4
14 12 1.00 5-1/4 5-3/4 20 1.13 7 7-1/2 20 1.38 9-1/4 9-1/4
16 16 1.00 5-1/4 5-3/4 20 1.25 7-1/2 8 20 1.50 10 10
18 16 1.13 5-3/4 6-1/4 24 1.25 7-3/4 8-1/4 20 1.63 10-3/4 10-3/4
20 20 1.13 6-1/4 6-3/4 24 1.25 8 8-3/4 24 1.63 11-1/4 11-1/2
24 20 1.25 6-3/4 7-1/4 24 1.50 9 10 24 1.88 13 13-1/4

ISO Approved Manufacturer Types Of P235GH Flange

Carbon Steel P235GH Threaded Flange

Carbon Steel P235GH Threaded Flange

CS P235GH Socket Weld Flange

CS P235GH Socket Weld Flange

P235gh Carbon Steel Plate Flange

P235gh Carbon Steel Plate Flange

En 10216-2 P235gh Lap Joint Flange

En 10216-2 P235ghs Lap Joint Flange

En 10216-2 P235gh Tc1 Blind Flange

En 10216-2 P235gh Tc1 Blind Flange

Werkstoff P235gh Spectacle Blind Flanges

Werkstoff P235ghs Spectacle Blind Flanges

Pressure Vessel P235GH Slip On Flange

Pressure Vessel P235GH Slip On Flange

En 1092-2 Steel P235gh Weld Neck Flange

En 1092-2 Steel P235gh Weld Neck Flange

Steel P235gh Tc1 Raised Face Flanges

Steel P235gh Tc1 Raised Face Flanges

Carbon Steel Grade P235gh Tc1 Reducing Flanges

Carbon Steel Grade P235gh Tc1 Reducing Flanges



About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy