Socket Weld Fittings

ISO Approved Socket Weld Fittings Manufacturer In India Available In A Wide Range Of Grades / Shapes And Material.

What Is Forged Pipe Fittings?


ANSI B16.11 Forged Pipe Fittings produce different kinds of forged fittings including the forged socket weld fittings. Rajtilak Metal is one of the leading forged fittings manufacturers in India and have connections to forged steel fittings manufacturers all over India and the world. All ANSI B16.11 Forged Fittings manufacturers produce all kinds of pipe fittings but their qualities and prices might vary. To monitor the quality, the forged fittings dimensions are monitored by standards. For example, if forged fittings manufacturers in Mumbai produced a fitting that is sold by forged fittings suppliers in uae, and if the nominal sizes are less than 4 inches, then the quality is governed by ANSI B16.11 forged fittings standards.

ANSI B16.11 Forged Pipe Fittings

ANSI B16.11 Forged Pipe Fittings

Socket Weld Fittings Manufacturers In India

Socket Weld Fittings Manufacturers In India

Stainless Steel Socket Weld Fittings

Stainless Steel Socket Weld Fittings

What Is Socket Weld Fittings?


The ASME B16.11 Socket Weld Fittings are produced in different types, shapes and standards by the socket weld fittings manufacturers. They produce SW fitting of all sizes and materials and they offer forged fittings weight chart for the client to decide which fitting is better for their needs. The pressure requirements often differ from application to application and this is managed by pressure classes.


What Is The Difference Between Socket Weld And Fillet Weld?


the 3000 lb socket weld fittings belong to a pressure class of 3000 and therefore the client knows that it could withstand 3000lbs of pressure.

Different materials such as the Fillet Weld Fittings are used to address different requirements; in this case, the light weight. The different material made Fillet Weld have their unique applications as well.


Which Class Fittings Are Available In Only Socket Weld Type?


Class 3000 And Class 6000 fittings are available in both Threaded Or Socket Weld Fittings


Difference Between Socket Weld Vs Buttweld?


The materials include but are not limited to Socket Weld fittings The need such as branching would require special types such as the Stainless Steel Socket Weld Fittings. Some applications need high end alloy steel fittings where some can use mild steel or the forged fittings. They include flanges, nipples, unions, couplings and many others.


Buttweld Fittings can be determined alike the BW Pipe Fittings according to the external and internal diameters of the pipe, the temperature and pressure of operation, the material make and the type of the fitting. We offer the clients with a comprehensive Buttweld Fittings Weight Chart for easy selection.


Check Class 3000 Stainless Steel Socket Weld Fittings Dimensions And 6000# Carbon Steel Socket Weld Fittings Weight Chart.

ASME B16.11 Socket Weld Fittings Price List


Socket Weld Fittings Price List

Please note this is an approx Price of forged steel pipe fittings in India. For final socket weld fitting Price List Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.


ASME B16.11 Forged Fittings Manufacturers in India

Refer Forged Socket Weld Fittings Pressure Rating And ASME B16.9 SW Fitting Size Chart.

ASME B16.11 Socket Weld Fittings Specification


Specification : ASME B16.11 Forged Pipe Fittings
ANSI B16.11 Standards ASME B16.11, Bs3799, MSS SP 79, JIS B2302, MSS SP 95, MSS SP 83
ASME B16.11 Tolerance : 0.06 inches (1.6 millimeter)
ANSI B16.11 Minimum Wall Thickness: 12.5%, minimum wall thickness
Finishing: Carbon Steel : Gavlvanized Or Black
Stainless Steel : Pickled
ANSI B16.11 Schedule 3000 - Schedule 80/XS, 6000 - Schedule 160, 9000 Schedule XXS.
ANSI B16.11 Size Socket Weld Fittings = ½” – 8”
ANSI B16.11 Pressure Rating : Socket Weld Fittings = 2000LB, 3000LB, 6000LB
ANSI B16.11 Types : 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee, Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple.
MSS SP-95 : Bull Plugs & Swage(d) Nipples
Threaded : No Threaded
Material : Stainless Steel, Carbon Steel, Inconel, Hastelloy, Copper Nickel, Cast Iron, Alloy Steel, Mild Steel, Duplex Steel & Super Duplex Steel, Wrought Iron.

ANSI B16.11 Pressure Rating

ANSI B16.11 Pressure Rating

Stainless Steel Socket Weld Fittings Dimensions


Stainless Steel Socket Weld Fittings Dimensions

DN Normal Pipe Sizes Socket Weld
Bore
Daimeter.(2)
B
Bore Diameter of
Fittings(2)
D
Socket Wall Thick.(1)
C
Body Wall
Thick.
G
Depth of
Socket
Min.
J
Class Designation Class Designation
Class Designation 3000# 6000# 3000# 6000#
3000LB 6000LB Ave. Minimum Ave. Minimum Minimum Minimum
6 1/8 11.2
10.8
7.6
6.1
7.6
6.1
3.18 3.18 3.96 3.43 2.41 3.15 9.5
8 1/4 14.6
14.2
10.0
8.5
10.0
8.5
3.78 3.30 4.60 4.01 3.02 3.68 9.5
10 3/8 18
17.6
13.3
11.8
13.3
11.8
4.01 3.50 5.03 4.37 3.20 4.01 9.5
15 1/2 22.2
21.8
16.6
15.0
16.6
15.0
4.67 4.09 5.97 5.18 3.73 4.78 9.5
20 3/4 27.6
27.2
21.7
20.2
21.7
20.2
4.90 4.27 6.96 6.04 3.91 5.56 12.5
25 1 34.3
33.9
27.4
25.9
27.4
25.9
5.69 4.98 7.92 6.93 4.55 6.35 12.5
32 1-1/4 43.1
42.7
35.8
34.3
35.8
34.3
6.07 5.28 7.92 6.93 4.85 6.35 12.5
40 1-1/2 49.2
48.8
41.6
40.1
41.6
40.1
6.35 5.54 8.92 7.80 5.08 7.14 12.5
50 2 61.7
61.2
53.3
51.7
53.3
51.7
6.93 6.04 10.92 9.50 5.54 8.74 16.0
65 2-1/2 74.4
73.9
64.2
61.2
64.2
61.2
8.76 7.67 7.01 16.0
80 3 90.3
89.8
79.4
76.4
79.4
76.4
9.52 8.30 7.62 16.0
100 4 115.7
115.2
103.8
100.7
103.8
100.7
10.69 9.35 8.56 16.0

Center to Bottom of Socket-A Laying Lengths Tolerances± End Wall
Thik.
K Minimum
Normal Pipe Sizes DN
90 Deg Elbow
Tee,Cross
45 Deg Elbow Coupling
E
Half
Coupling
F
A E F
Class Designation Class Designation Class Designation
3000# 6000# 3000# 6000# 3000# 6000#
11.0 11.0 8.0 8.0 6.5 16.0 1.0 1.5 1.0 4.8 6.4 1/8 6
11.0 13.5 8.0 8.0 6.5 16.0 1.0 1.5 1.0 4.8 6.4 1/4 8
13.5 15.5 8.0 11.0 6.5 17.5 1.5 3.0 1.5 4.8 6.4 3/8 10
15.5 19.0 11.0 12.5 9.5 22.5 1.5 3.0 1.5 6.4 7.9 1/2 15
19.0 22.5 13.0 14.0 9.5 24.0 1.5 3.0 1.5 6.4 7.9 3/4 20
22.5 27.0 14.0 17.5 12.5 28.5 2.0 4.0 2.0 9.6 11.2 1 25
27.0 32.0 17.5 20.5 12.5 30.0 2.0 4.0 2.0 9.6 11.2 1-1/4 32
32.0 38.0 20.5 25.5 12.5 32.0 2.0 4.0 2.0 11.2 12.7 1-1/2 40
38.0 41.0 25.5 28.5 19.0 41.0 2.0 4.0 2.0 12.7 15.7 2 50
41.0 28.5 19.0 43.0 2.5 5.0 2.5 15.7 19.0 2-1/2 65
57.0 32.0 19.0 44.5 2.5 5.0 2.5 19.0 22.4 3 80
66.5 41.0 19.0 48.0 2.5 5.0 2.5 22.4 28.4 4 100

View Our High Pressure Socket Weld Fittings Price List And ASME B16.11 Forged Fittings Tolerances Chart.

Carbon Steel Socket Weld Fittings Weight


Normal Pipe Sizes A B QTY Weight In KG
¼ 0.81 0.88 160 0.20
0.97 1.00 130 0.26
½ 1.12 1.31 100 0.57
¾ 1.31 1.5 75 0.71
1 1.5 1.81 40 1.08
1 ¼ 1.75 2.19 25 1.68
1 ½ 2.00 2.44 18 2.38
2 2.38 2.97 10 3.55
2 ½ 3.00 3.62 4 6.22
3 3.38 4.31 2 10.36
4 4.19 5.75 1 23.91

Check Difference Between Socket Weld And Threaded Fittings And Class 900 Forged Steel Pipe Fittings Supplier In India.

Class 3000 SW Fittings Size Chart

Normal Pipe Sizes Minimum Length
of Thread
OD
of Band
D
Center to End
A
Minimum
Wall Thick.
B J
1/2 10.9 13.6 33 28 3.18
3/4 12.7 13.9 38 33 3.18
1 14.7 17.3 46 38 3.68
1 ¼ 17 18 56 44 3.89
1 ½ 17.8 18.4 62 51 4.01
2 19 19.2 75 60 4.27
2 ½ 23.6 28.9 92 76 5.61
3 25.9 30.5 109 86 5.99
4 27.7 33 146 106 6.55

Forged Socket Weld Fittings Tolerances

ANSI B16.11 American Standard Dimensional Tolerances
"A" - Socket Center To BottomFor Size
1/8" And 1/4"
± 0.03"
3/8", 1/2" And 3/4"± 0.06"
1", 1-1/4", 1-1/2" And 2"± 0.08"
2-1/2", 3", And 4"± 0.10"
"B" - Socket Bore DiameterFor Size
1-1/2" And Smaller
+ 0.020"
- 0.000"
2", 2-1/2", 3" And 4"+ 0.025"
- 0.000"
"C" - Socket Wall Thick.Min. = 1.09 T (But Not Less Than 5/32")
T = Wall Thickness Of Nominal Pipe Sizes
"D" - Bore Diameter Of Pipe FittingFor Size
2" And Smaller
± 0.030"
2-1/2", 3" And 4"± 0.060"
"E" - Sockets- Bottom To Bottom - Full CouplingsFor Size
1/8" And 1/4"
± 0.06"
3/8", 1/2" And 3/4"± 0.12"
1", 1-1/4", 1-1/2" And 2"± 0.16"
2-1/2", 3", And 4"± 0.20"
"F" - Bottom Of Socket To Opposite Face - ANSI B16.11 Half CouplingsFor Size
1/8" And 1/4"
± 0.03"
3/8", 1/2" And 3/4"± 0.06"
1", 1-1/4", 1-1/2" And 2"± 0.08"
2-1/2", 3", And 4"± 0.10"
"G" - Gap Of WeldingApprox. 0.06"
Before Welding Recommended Gap
"H" - Min. FlatMin. Flat = 0.75 X Min.
Socket Wall Thick.

Forged Steel Pipe Fittings Wall Thickness

Forged Steel Pipe Fittings Wall Thickness

Available Types Of ANSI B16.11 Forged Pipe Fittings





About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy