EN 1092-1 Flange

Specification Chart Of Flanges To Din En 1092-2 Type 21 And EN 1092-1 Flange Tolerances And Weight.

EN 1092-1 Flange

EN 1092-1 Flange

EN 1092-1 Type 01 Plate Flange

EN 1092-1 Type 01 Plate Flange

Blind Flange EN 1092-1 Type 05

Blind Flange EN 1092-1 Type 05


What Is EN 1092-1?


EN 1092-1 are cast iron flanges. The EN 1092-1 Flanges dimensions and weight differ according to the blind flange en 1092-1 type 05 material and standards. Different use cases such as EN 1092-1 Slip On flange which is used to end a pipeline are also available in this range. The different pressure classes also contribute to the difference in weight and dimensions such as the Flange According To En 1092-1 which belong to the pressure class PN10. en 1092-1 type 01 plate flange belong to a much lower pressure class. EN 1092-1 b1 Pipe Flanges belong to a raised face type.

EN 1092-1 Flange


ISO Approved EN 1092-1 Type 11 Flanges Manufacturer In India, BS EN 1092-2 Flange Dimensions.


En 1092-1 Flange Standard Specification

Material Specification Of : EN 1092-1 Flange
Marking Standard Name of Manufacturer
Schedule
Type of Flange Facing
Nominal Pipe Size
Pressure Class
ASME B16 Designation
Bolt Type high strength bolts
medium strength bolts
low strength bolts
European Standard Flanges JIS B2220 Flanges (5k to 30k) and KS1503 flanges
Russian-Standard Flanges GOST 12820 / 12821-80, DIN, UNI, EN 1092-1
South African Standard Flanges SANSflanges And SABS flanges
Surface Finish smooth, concentric serrated, stock
Standard Cover : pressure ratings & temperature ratings, materials, marking, dimensions, weight, tolerances, testing
Contact Faces RTJ (Ring Type Joint), FF (Flat Face), RF (Raised Face), T/G (Tongue And Groove ), M/F (Male And Female)
Size Chart Normal Pipe Size 1/2 to NPS 24"
Materials Stainless Steel (Grade 304/L, 316/L), Carbon Steel (ASTM A105 And ASTM A350), Alloy Steel (ASTM A182), Mild Steel, Duplex Steel, Pressure Vessel Steel, Titanium, Super Duplex Steel, Nickel Alloy, Monel, Inconel, Hastelloy, Copper Nickel, Cast Iron, Wrought Iron.
Thickness Normal Pipe Size ≤ 18
Bore Diameter Normal Pipe ≤ 10
Flanges Standards EN 1092-1, JIS, ASME B16.5, ASME B16.47 type A, UNI, DIN
Pressure Rating Class 150 To Class 2500
High Temperature Above 200°C (400°F) For Class 150 Or Above 400°C (750°F)
Low Temperature Above -29 Degree C (−20°F)
Common Types Of Flanges: Slip On (SORF), Weld Neck (WNRF), Blind (BLRF), Lap Joint (Loose), Threaded (NPT), Socket-Weld (SWRF)
Special Types Of Flanges : Nipoflange, Elboflange, Latroflange, Swivel Flanges, Expanding Flanges, Reducing Flanges, Weldoflanges
Gaskets Types Full Face Gasket
Flat Ring Gasket
Metallic Ring Gakset
Advantages Of Pipe Flanges Used to Connect Pipe System
Easy Repair Pipe System
Assembled Without Welding

En 1092-1 Flange Dimensions


En 1092-1 Flange Dimensions


En 1092-1 PN2.5 Flange Dimensions

en 1092-1 pn2-5 flange dimensions

EN 1092-1 PN10 Flange Dimensions

EN 1092-1 PN10 Flange Dimensions

Flange DN Sizes Pipe Flange Screws Flange Weight In KG
d1 k D b d2 Bolt holes KG
200 219,1 221,5 295 340 24 22 8 9,244
250 273,0 276,5 350 395 26 22 12 11,788
300 323,9 327,5 400 445 26 22 12 13,578
350 355,6 359,5 460 505 30 22 16 21,766
400 406,4 411,0 515 565 32 26 16 27,436
450 457,2 462,0 565 615 36 26 20 33,470
500 508,0 513,5 620 670 38 26 20 40,103
600 610,0 616,5 725 780 42 30 20 54,297
700 711,0 714,2 840 895 50 30 24 82,777
800 813,0 815,8 950 1015 56 33 24 116,534
900 914,0 917,4 1050 1115 62 33 28 141,425
1000 1016,0 1019,0 1160 1230 70 36 28 188,561
1200 1219,0 1224,0 1380 1455 83 39 32 290,884

EN 1092-1 PN16 Flange Dimensions

EN 1092-1 PN16 Flange Dimensions

Flange DN Sizes Pipe Flange Screws Flange Weight In KG
d1 k D b d2 Bolt holes KG
10 17,2 18,0 60 90 14 14 4 0,602
15 21,3 22,0 65 95 14 14 4 0,668
20 26,9 27,5 75 105 16 14 4 0,933
25 33,7 34,5 85 115 16 14 4 1,106
32 42,4 43,5 100 140 18 18 4 1,816
40 48,3 49,5 110 150 18 18 4 2,075
50 60,3 61,5 125 165 20 18 4 2,723
65 76,1 77,5 145 185 20 18 4 3,310
80 88,9 90,5 160 200 20 18 8 3,592
100 114,3 116,0 180 220 22 18 8 4,375
125 139,7 141,5 210 250 22 18 8 5,394
150 168,3 170,5 240 285 24 22 8 7,123
200 219,1 221,5 295 340 26 22 12 9,705
250 273,0 276,5 355 405 29 26 12 14,164
300 323,9 327,5 410 460 32 26 12 18,928
350 355,6 359,0 470 520 35 26 16 28,118
400 406,4 411,0 525 580 38 30 16 35,754
450 457,0 462,0 585 640 42 30 20 45,992
500 508,0 513,5 650 715 46 33 20 63,832
600 610,0 616,5 770 840 55 36 20 101,285
700 711,0 714,2 840 910 63 36 24 111,103
800 813,0 815,8 950 1025 74 39 24 158,555
900 914,0 917,4 1050 1125 82 39 28 192,239
1000 1016,0 1019,0 1170 1255 90 42 28 269,554

En 1092 1 Flange Pressure Rating And Looking To Buy Welding Neck Flange EN 1092-1 Type 11 Supplier In India? Contact Rajtilak Metal At Factory Price.


EN 1092-1 PN 63 Flange Dimensions

EN 1092-1 PN 63 Flange Dimensions

DIN EN 1092-1 PN-160-400 Flange Dimensions

DIN EN 1092-1 PN-160 Flange

DIN EN 1092-1 PN-160 Flange Dimensions

EN 1092-1 Type 11 PN 10 Weld Neck Flange Dimensions

Weld Neck Flanges DNFlangesWelding NeckRaised face (RF)Stud Bolts Of Flanges Weight In (Kilogram)
d1kDbh1d3srh2d4fd2Threadholes Of Bolt(Kg)
200219,129534024622346,301016268322M20811,600
250273,035039526682926,301216320322M201215,800
300323,940044526683427,101216370422M201218,300
350355,646050526683857,101216430422M201625,300
400406,451556526724407,101216482426M241630,600
450457,056561528724887,101216532426M242035,100
500508,062067028755427,101216585426M242040,500
600610,072578030826428,001218685530M272052,900
700711,084089535857468,801218800530M272475,800
800813,0950101538968508,801218905533M3024102,000
900914,010501115389995012,5012201005533M3028121,000
10001016,01160123044105105212,5016201110536M3328161,000
12001219,01380145555132125612,5016251330539M3632258,000
14001422,01590167565143146014,2016251535542M3936371,000
16001626,01820191575159166616,0016251760548M4540547,000
18001829,02020211585175186817,5016301960548M4544691,000
20002032,02230232590186207217,5016302170548M4548830,000
22002235,024402550100202227520,0018352370556M52521.073,000
24002438,026502760110218247822,2018352570556M52561.329,000
26002620,028502960110224268025,0018402780556M52601.574,000
28002820,030703180124244288225,0018403000556M52641.987,000
30003020,032903405132257308532,0018453210562M56682.476,000

EN 1092-1 Type 11 PN 16 Weld Neck Flange Dimensions

Weld Neck Flanges DNFlangesWelding NeckRaised face (RF)Stud Bolts Of Flanges Weight In (Kilogram)
d1kDbh1d3srh2d4fd2Threadholes Of Bolt(Kg)
1521,365951638322,004645214M1240,678
2026,9751051840402,304658214M1240,768
2533,7851151840462,604668214M1241,090
3242,41001401842562,606678218M1641,300
4048,31101501845642,606788318M1641,910
5060,31251651845742,968102318M1642,530
6576,11451851845922,9610122318M1643,030
8088,916020020501053,2610138318M1683,920
100114,318022020521313,6812158318M1684,620
125139,721025022551564,0812188318M1686,300
150168,324028522551844,51012212322M2087,810
200219,129534024622356,301016268322M201211,500
250273,035540526702926,301216320326M241216,700
300323,941046028783447,101216378426M241222,100
350355,647052030823908,001216438426M241632,800
400406,452558032854458,001216490430M271641,100
450457,058564034834908,001216550430M272048,500
500508650715,036845488,01216610433M302063,400
600610770840,0408867010,01218725536M332096,000
700711840910,04010475510,01218795536M332496,500
8008139501025,04110885512,51220900539M3624122,000
90091410501125,04811895512,512201000539M3628155,000
1000101611701255,059137105812,516221115542M3928233,000
1200121913901485,078160126214,216301330548M4532390,000
1400142215901685,084177146516,016301530548M4536495,000
1600162618201930,0102204166817,516351750556M5240760,000
1800182920202130,0110218187020,016351950556M5244929,000
2000203222302345,0124238207222,016402150562M56481.185,000

EN 1092-1 Type 11 PN 25 Weld Neck Flange Dimensions

Weld Neck Flanges DNFlangesWelding NeckRaised face (RF)Stud Bolts Of Flanges Weight In (Kilogram)
d1kDbh1d3srh2d4fd2Threadholes Of Bolt(Kg)
200219,131036030802446,31016278326M241217,100
25027337042532882987,11218335330M271224,300
300323,943048534923528,01218395430M271631,800
350355,6490555381003988,01220450433M301648,800
400406,4550620401104528,81220505436M331663,300
450457600670461105008,81220550436M332076,000
5005086607304812555810,01220615436M332097,000
6006107708454812566011,01220720539M3620121,000
7007118759605012976014,21220820542M3924155,000
80081399010855313886416,01222930548M4524205,000
900914109011855714896817,512241030548M4528249,000
100010161210132063160107020,016241140556M5228338,000

EN 1092-1 Type 11 PN 40 Weld Neck Flange Dimensions

Weld Neck Flange DNFlangesWelding NeckRaised face (RF)Stud Bolts Of Flange Weight In (Kilogram)
d1kDbh1d3srh2d4fd2Threadholes Of Bolt(Kg)
1521,365951638322,004645214M1240,768
2026,9751051840402,304658214M1241,090
2533,7851151840462,604668214M1241,300
3242,41001401842562,606678218M1641,910
4048,31101501845642,606788318M1642,150
5060,31251652048752,9068102318M1642,850
6576,11451852252902,90610122318M1683,680
8088,916020024581053,20812138318M1684,780
100114,319023524651343,60812162322M2086,460
125139,722027026681624,00812188326M2488,860
150168,325030028751924,501012218326M24811,700
200219,132037534882446,301016285330M271221,000
250273,0385450381053067,101218345333M301234,200
300323,9450515421153628,001218410433M301647,600
350355,6510580461254088,801220465436M331669,300
400406,45856605013546211,001220535439M361698,000
450457,06106855713550012,501220560439M3620105,000
500508,06707555714056214,201220615442M3920130,000
600610,07958907215066616,001220735548M4520209,000

Fast Delivery On Blind Flange En 1092-1 Type 05 In Mumbai, India, Check En 1092-1 Type 11 PN40/ PN10/ PN16 Thickness Calculation For Pressure Vessel.

EN 1092-1 Type 01 PN 10 Plate Flange Dimensions

Flanges Size (DN)PipesFlangesStud Bolts OfFlange Weight In Kilogram
d1kDbd2Threadholes Of Bolt(KG)
200219,1221,52953402422M2089,244
250273,0276,53503952622M201211,788
300323,9327,54004452622M201213,578
350355,6359,54605053022M201621,766
400406,4411,05155653226M241627,436
450457,2462,05656153626M242033,470
500508,0513,56206703826M242040,103
600610,0616,57257804230M272054,297
700711,0714,28408955030M272482,777
800813,0815,895010155633M3024116,534
900914,0917,4105011156233M3028141,425
10001016,01019,0116012307036M3328188,561
12001219,01224,0138014558339M3632290,884

EN 1092-1 Type 01 PN 16 Plate Flange Dimensions

Flanges Size (DN)PipesFlangesStud Bolts OfFlange Weight In Kilogram
d1kDbd2Threadholes Of Bolt(KG)
1017,218,060901414M1240,602
1521,322,065951414M1240,668
2026,927,5751051614M1240,933
2533,734,5851151614M1241,106
3242,443,51001401818M1641,816
4048,349,51101501818M1642,075
5060,361,51251652018M1642,723
6576,177,51451852018M1643,310
8088,990,51602002018M1683,592
100114,3116,01802202218M1684,375
125139,7141,52102502218M1685,394
150168,3170,52402852422M2087,123
200219,1221,52953402622M20129,705
250273,0276,53554052926M241214,164
300323,9327,54104603226M241218,928
350355,6359,04705203526M241628,118
400406,4411,05255803830M271635,754
450457,0462,05856404230M272045,992
500508,0513,56507154633M302063,832
600610,0616,57708405536M3320101,285
700711,0714,28409106336M3324111,103
800813,0815,895010257439M3624158,555
900914,0917,4105011258239M3628192,239
10001016,01019,0117012559042M3928269,554

EN 1092-1 Type 01 PN 25 Plate Flange Dimensions

Flanges Size (DN)PipesFlangesStud Bolts OfFlange Weight In Kilogram
d1kDbd2Threadholes Of Bolt(KG)
1521,322,065951414M1240,668
2026,927,5751051614M1240,933
2533,734,5851151614M1241,106
3242,443,51001401818M1641,816
4048,349,51101501818M1642,075
5060,361,51251652018M1642,723
6576,177,51451852218M1683,465
8088,990,51602002418M1684,310
100114,3116,01902352622M2086,056
125139,7141,52202702826M2488,170
150168,3170,52503003026M24810,238
200219,1221,53103603226M241214,245
250273,0276,53704253530M271220,087
300323,9327,54304853830M271626,526
350355,6359,54905554233M301641,656
400406,4411,05506204836M331657,456
450457,0462,06006705436M332069,548
500508,0513,56607305836M332086,736
600610,0616,57708456839M3620126,866
700711,2714,08759608542M3924193,031
800812,8816,099010859548M4524266,311

EN 1092-1 Type 01 PN 40 Plate Flange Dimensions

Flanges Size (DN)PipesFlangesStud Bolts OfFlange Weight In Kilogram
d1kDbd2Threadholes Of Bolt(KG)
1521,322,065951414M1240,668
2026,927,5751051614M1240,933
2533,734,5851151614M1241,106
3242,443,51001401818M1641,816
4048,349,51101501818M1642,075
5060,361,51251652018M1642,723
6576,177,51451852218M1683,465
8088,990,51602002418M1684,310
100114,3116,01902352622M2086,056
125139,7141,52202702826M2488,170
150168,3170,52503003026M24810,238
200219,1221,53203753630M271217,871
250273,0276,53854504233M301229,166
300323,9327,54505155233M301644,921
350355,6359,55105805836M331666,460
400406,4411,05856606539M361696,822

EN 1092-1 Type 05 PN 10 Blind Flange Dimensions

Nominal Diameter Of
Flange DN
FlangesStud BoltsFlange Weight In Kilogram
kDbd2Threadholes Of Bolt(KG)
2002953402422M20816,500
2503503952622M201224,100
3004004452622M201230,800
3504605052622M201639,600
4005155652626M241649,400
4505656152826M242063,000
5006206702826M242075,200
6007257803430M2720124,000
7008408953830M2724183,000
80095010154833M3024297,000
900105011155033M3028374,000
1000116012305436M3328492,000
1200138014556639M3632842,000

EN 1092-1 Type 05 PN 16 Blind Flange

Nominal Diameter Of
Flange DN
FlangesStud BoltsFlange Weight In Kilogram
kDbd2Threadholes Of Bolt(KG)
1565951614M1240,813
20751051814M1241,140
25851151814M1241,380
321001401818M1642,030
401101501818M1642,350
501251651818M1642,880
651451851818M1643,643
801602002018M1684,610
1001802202018M1685,650
1252102502218M1688,130
1502402852222M20810,500
2002953402422M201216,200
2503554052626M241225,000
3004104602826M241235,100
3504705203026M241648,000
4005255803230M271663,500
4505856404030M272096,600
5006507154433M3020133,000
6007708405436M3320226,000
7008409105836M3324285,000
80095010256239M3624388,000
900105011256439M3628483,000
1000117012556842M3928640,000

EN 1092-1 Type 13 PN 6 Threaded Flange Dimensions

EN 1092-1 Type 13 PN 6 Threaded Flange

Normal Daimeter Of Flanges DN FlangesWeld NeckRaised face (RF)ScrewsFlanges Weight In Kilogram
d1ThreadkDbh1d3d4fd2ThreadHoles Of Bolt(KG)
1521,3R 1/2″5580122030,040,02,011M1040,373
2026,9R 3/4″6590142440,050,02,011M1040,584
2533,7R 1″75100142450,060,02,011M1040,729
3242,4R 1-1/4″90120142660,070,02,014M1241,040
4048,3R 1-1/2″100130142670,080,03,014M1241,200
5060,3R 2″110140142880,090,03,014M1241,340
6576,1R 2-1/2″1301601432100,0110,03,014M1241,830
8088,9R 3″1501901634110,0128,03,018M1642,750
100114,3R 4″1702101640130,0148,03,018M1643,010
125139,7R 5″2002401844160,0178,03,018M1684,300
150168,3R 6″2252651844185,0202,03,018M1684,630

EN 1092-1 Type 13 PN 16 Threaded Flange Dimensions

Normal Daimeter Of Flanges DN FlangesWeld NeckRaised face (RF)ScrewsFlanges Weight In Kilogram
d1ThreadkDbh1d3d4fd2ThreadHoles Of Bolt(KG)
1521,3R 1/2″6595162235,045,02,014M1240,722
2026,9R 3/4″75105182645,058,02,014M1241,040
2533,7R 1″85115182852,068,02,014M1241,250
3242,4R 1-1/4″100140183060,078,02,018M1641,810
4048,3R 1-1/2″110150183270,088,03,018M1642,060
5060,3R 2″125165182884,0102,03,018M1642,390
6576,1R 2-1/2″1451851832104,0122,03,018M1642,970
8088,9R 3″1602002034118,0138,03,018M1683,780
100114,3R 4″1802202040140,0158,03,018M1684,380
125139,7R 5″2102502244168,0188,03,018M1686,070
150168,3R 6″2402852244195,0212,03,022M2087,240

Refer EN 1092-1 Slip On Flange And Plate Flange Dimensions EN 1092 (PN 6/10/16/25/40), Buy Loose Flange En 1092-1 Type 02 For Pipeline Connection.

EN 1092 1 Flange Pressure Rating

 

 

 

 

Temperature

 

 

 

EN 1092 1 FLANGE TABLE

-10°C to 200°C

250°C

300°C

350°C

400°C

425°C

450°C

475°C

 

 

 

 

 

 

 

 

 

6

6

5.5

5

 

 

 

 

 

 

 

 

 

10

10

9

8

7

6

 

 

 

 

 

 

 

 

 

16

16

15

13

11

9

 

 

 

 

 

 

 

 

 

25

25

24

21

17

14

12

9

6

 

 

 

 

 

 

 

 

 

40

40

38

33

28

23

20

15

10

 

 

 

 

 

 

 

 

 

64

64

61

53

44

36

32

24

16

 

 

 

 

 

 

 

 

 

100

100

95

83

70

57

50

37

25

 

 

 

 

 

 

 

 

 

160

160

152

132

112

92

80

60

40

 

 

 

 

 

 

 

 

 


BS En 1092-1 Flange Tolerances

en 1092-1 flange tolerances

Tolleranza EN 1092-1 PN 2.5 EN 1092-1 PN 6 EN 1092-1 PN 10 (DIN 2642) EN 1092-1 PN 16
Ø DN Ø A S Sp d1 H5 F d1 H5 F d1 H5 F d1 H5 F
10 17,2 +/-0,75%, min. +/-0,3mm +15% / -12,5% S<=6mm +1/-0mm, S>6mm +2/-0mm 35 +2/-1mm 7 +/-1,5mm 2,5 +/-0,20mm 35 +2/-1mm 7 +/-1,5mm 2,5 +/-0,20mm 40 +2/-1millimeter 7 (9) +/-1,5mm 2,5 (3 min) +/-0,20mm 40 +2/-1millimeter 7 +/-1,5mm 2,5 +/-0,20mm
15 21,3 +/-0,75%, min. +/-0,3mm +15% / -12,5% S<=6mm +1/-0mm, S>6mm +2/-0mm 40 +2/-1millimeter 7 +/-1,5mm 2,5 +/-0,20mm 40 +2/-1millimeter 7 +/-1,5mm 2,5 +/-0,20mm 45 +2/-1millimeter 7 (9) +/-1,5mm 2,5 (3 min) +/-0,20mm 45 +2/-1mm 7 +/-1,5mm 2,5 +/-0,20mm
20 26,9 +/-0,75%, min. +/-0,3millimeter +15% / -12,5% S<=6millimeter +1/-0millimeter, S>6millimeter +2/-0millimeter 50 +2/-1millimeter 8 +/-1,5millimeter 3 +/-0,20millimeter 50 +2/-1millimeter 8 +/-1,5millimeter 3 +/-0,20millimeter 58 +2/-1millimeter 8 (12) +/-1,5millimeter 3 +/-0,20millimeter 58 +2/-1millimeter 8 +/-1,5millimeter 3 +/-0,20millimeter
25 33,7 +/-0,75%, min. +/-0,3millimeter +15% / -12,5% S<=6millimeter +1/-0millimeter, S>6millimeter +2/-0millimeter 60 +2/-1millimeter 10 +/-1,5millimeter 3 +/-0,20millimeter 60 +2/-1millimeter 10 +/-1,5millimeter 3 +/-0,20millimeter 68 +2/-1millimeter 10 (15) +/-1,5millimeter 3 +/-0,20millimeter 68 +2/-1millimeter 10 +/-1,5millimeter 3 +/-0,20millimeter
32 42,4 +/-0,75%, min. +/-0,3millimeter +15% / -12,5% S<=6millimeter +1/-0millimeter, S>6millimeter +2/-0millimeter 70 +2/-1millimeter 12 +/-1,5millimeter 3 +/-0,20millimeter 70 +2/-1millimeter 12 +/-1,5mm 3 +/-0,20mm 78 +2/-1millimeter 12 (15) +/-1,5mm 3 (3,5 min) +/-0,20mm 78 +2/-1millimeter 12 +/-1,5mm 3 +/-0,20mm
40 48,3 +/-0,75%, min. +/-0,3mm +15% / -12,5% S<=6mm +1/-0mm, S>6mm +2/-0mm 80 +2/-1millimeter 15 +/-1,5mm 3 +/-0,20mm 80 +2/-1mm 15 +/-1,5mm 3 +/-0,20mm 88 +2/-1mm 15 (17) +/-1,5mm 3 (3,5 min) +/-0,20mm 88 +2/-1mm 15 +/-1,5mm 3 +/-0,20mm
50 60,3 +/-0,75%, min. +/-0,3mm +15% / -12,5% S<=6mm +1/-0mm, S>6mm +2/-0mm 90 +2/-1mm 20 +/-1,5mm 3 +/-0,20mm 90 +2/-1mm 20 +/-1,5mm 3 +/-0,20mm 102 +2/-1mm 20 (23) +/-1,5mm 4 (3,5 min) +/-0,20mm 102 +2/-1mm 20 +/-1,5mm 4 +/-0,20mm
65 76,1 +/-0,75%, min. +/-0,3mm +15% / -12,5% S<=6mm +1/-0mm, S>6mm +2/-0mm 110 +2/-1mm 20 +/-1,5mm 3 +/-0,20mm 110 +2/-1mm 20 +/-1,5mm 3 +/-0,20mm 122 +2/-1mm 20 (23) +/-1,5mm 4 (3,5 min) +/-0,20mm 122 +2/-1mm 20 +/-1,5mm 4 +/-0,20mm
80 88,9 +/-0,75%, min. +/-0,3mm +15% / -12,5% S<=6mm +1/-0mm, S>6mm +2/-0mm 128 +2/-1mm 25 +/-1,5mm 4 +/-0,20mm 128 +2/-1mm 25 +/-1,5mm 4 +/-0,20mm 138 +2/-1mm 25 (23) +/-1,5mm 4 +/-0,20mm 138 +2/-1mm 25 +/-1,5mm 4 +/-0,20mm
100 114,3 +/-0,75%, min. +/-0,3mm +15% / -12,5% S<=6mm +1/-0mm, S>6mm +2/-0mm 148 +2/-1mm 25 +/-2mm 4 +/-0,20mm 148 +2/-1mm 25 +/-2mm 4 +/-0,20mm 158 +2/-1mm 25 (28) +/-2mm 4 +/-0,20mm 158 +2/-1mm 25 +/-2mm 4 +/-0,20mm
125 139,7 +/-0,75%, min. +/-0,3mm +15% / -12,5% S<=6mm +1/-0mm, S>6mm +2/-0mm 178 +2/-1mm 25 +/-2mm 4 +/-0,20mm 178 +2/-1mm 25 +/-2mm 4 +/-0,20mm 188 +2/-1mm 25 (30) +/-2mm 4 +/-0,20mm 188 +2/-1mm 25 +/-2mm 4 +/-0,20mm
150 168,3 +/-0,75%, min. +/-0,3mm +15% / -12,5% S<=6mm +1/-0mm, S>6mm +2/-0mm 202 +2/-1mm 25 +/-2mm 4 +/-0,20mm 202 +2/-1mm 25 +/-2mm 4 +/-0,20mm 212 +2/-1mm 25 (30) +/-2mm 4 +/-0,20mm 212 +2/-1mm 25 +/-2mm 5 +/-0,20mm
200 219,1 * +15% / -12,5% S<=6mm +1/-0mm, S>6mm +2/-0mm 258 +2/-1mm 30 +/-2mm 5 +/-0,20mm 258 +2/-1mm 30 +/-2mm 5 +/-0,20mm 268 +2/-1mm 30 (30) +/-2mm 4 +/-0,20mm 268 +2/-1mm 30 +/-2mm 6 +/-0,20mm

Gaskets For En 1092-1 Flanges

NPS Gasket I.D.
Gasket O.D.
Class 150 Class 300 Class 400 Class 600 Class 900
1/2 0.84 1.875 2.125 2.125 2.125 2.50
3/4 1.06 2.25 2.625 2.625 2.625 2.75
1 1.31 2.625 2.875 2.875 2.875 3.125
1 1/4 1.66 3 3.25 3.25 3.25 3.50
1 1/2 1.91 3.375 3.75 3.75 3.75 3.875
2 2.38 4.125 4.375 4.375 4.375 5.625
2 1/2 2.88 4.875 5.125 5.125 5.125 6.50
3 3.50 5.375 5.875 5.875 5.875 6.625
4 4.50 6.875 7.125 7.00 7.625 8.125
5 5.56 7.75 8.50 8.375 9.50 9.75
6 6.62 8.75 9.875 9.75 10.50 11.375
8 8.62 11 12.125 12.00 12.625 14.125
10 10.75 13.375 14.25 14.125 15.75 17.125
12 12.75 16.125 16.625 16.50 18.00 19.625

Get Free Quote Type Of EN 1092-1 Flange


Blind Flange En 1092-1 Type 05

Blind Flanges En 1092-1 Type 05

En 1092-1 Slip On Flange

En 1092-1 Slip On Flanges

Welding Neck Flange En 1092-1 Type 11

Welding Neck Flanges En 1092-1 Type 11

En 1092-1 Type 01 Plate Flange

En 1092-1 Type 01 Plate Flanges

En 1092-1 Threaded Flange

En 1092-1 Threaded Flanges

En 1092-1 Flat Flange

En 1092-1 Flat Flanges

Flange Standard En 1092-1

Flanges Standard En 1092-1

Lapped Flange Din En 1092-1

Lapped Flanges Din En 1092-1

Flange Pn40 En 1092-1-b1 Din 2501

Flanges Pn40 En 1092-1-b1 Din 2501

En 1092-1 Type 01 Pn6 Plate Flange

En 1092-1 Type 01 Pn6 Plate Flanges

Flange Cieche Uni En 1092-1 Pn 6

Flanges Cieche Uni En 1092-1 Pn 6

En 1092-1 Pn6 Flange

En 1092-1 Pn6 Flanges


The different pressure classes and different types could be denoted such as the Duplex Steel pn 16 Flanges din EN 1092-1 which is made up of duplex steel and belonging to PN16 pressure class or the Inconel EN 1092-1 flat flanges which is a flat flanges made up of nickel alloy. Copper Nickel EN 1092-1 loose flanges is a loose flanges made up of copper alloy which is used in acidic conditions. Alloy 20 EN 1092-1 slip on flanges is a slip on type flanges which could also be used in acidic conditions. There are threaded flanges as well. The ASTM A350 LF2 EN 1092-1 threaded flanges is used in line with pipes that have threads in the edges flanges to be threaded in rather than bolted or welded upon.



About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy