UNS S31803 Bolts
Refer UNS S31803 Fasteners Chemical Composition And Duplex Steel 1.4462 Hex Nut Mechanical Properties.
UNS S31803 Fasteners
Duplex Steel 1.4462 Threaded Rod
DIN 1.4462 Hex Nuts
ASTM A479 Duplex S31803 Studs
Duplex S31803 Wood Screws
Table Of Contents
- UNS S31803 Fasteners Equivalent Table
- UNS S31803 Bolts Chemical Composition
- DIN 1.4462 Hex Nuts Mechanical Properties
- Duplex Steel S31803 Stud Bolts Physical Properties
- DIN 931 S31803 Fasteners Specification List
- ISO 4014 Duplex S31803 Bolts Shear Strength
- ASTM A182 F51 Bolts Torque Chart
- Dimensions Of ASME SA479 S31803 Bolts
- Dimensions Of Duplex S31803 Hex Nuts
- Dimensions Of Duplex Steel 1.4462 Stud Bolts
- Dimensions Of A479 Duplex Steel S31803 Square Bolts
- Alloy S31803 Heavy Hex Bolts Dimensions Chart
- Dimensions Of Duplex Stainless Steel S31803 Heavy Hex Nuts
- ASTM Duplex S31803 Socket Head Cap Screw Dimensions Chart
- ASME SA182 F60 Threaded Rod Dimensions Chart
- UNS S31803 Flat Washer Dimensions Chart
- Duplex Steel UNS S31803 Nuts Size Chart
- S31803 Duplex Steel Threaded Rod Size Chart
- ASTM A276 Type S31803 Screws Size Chart
- UNS S31803 Fasteners Weight Chart
- Accept All Small And Large Orders Type Of UNS S31803 Bolts
UNS S31803 Fasteners Equivalent Table
Alloy |
Common Name |
European DIN
|
UNS
|
ASTM/ ASME
|
|---|---|---|---|---|
2205
|
SAF 2205®
|
1.4462
|
S31803/S32205
|
F51/F60
|
UNS S31803 Bolts Chemical Composition
Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
Fe |
UNS S31803 Bolts |
0.030 maximum |
2.00 maximum |
1.00 maximum |
0.030 maximum |
0.020 maximum |
22.0 – 23.0 |
3.0 – 3.5 |
4.50 – 6.50 |
0.14 – 0.20 |
63.72 minimum |
DIN 1.4462 Hex Nuts Mechanical Properties
UNS S31803 Bolts |
Density |
Melting Point |
Yield Strength (0.2%Offset) |
Tensile Strength |
Elongation |
7.8 g/cm3 |
1350 °C (2460 °F) |
Psi – 80000 , MPa – 550 |
Psi – 116000 , MPa – 800 |
15 % |
Duplex Steel S31803 Stud Bolts Physical Properties
Density lbm/in3 |
Electrical Resistivity mW•in |
Thermal Conductivity (BTU/hr•ft•°F) |
Heat Capacity BTU/lbm•°F |
Electrical Resistivity (in x 10-6) |
|
| at 68°F | 0.278 | 27.6 | 8.7 | 0.112 | 33.5 |
| at 212°F | 26.1 | 9.2 | 0.119 | 35.4 | |
| at 392°F | 25.4 | 9.8 | 0.127 | 37.4 | |
| at 572°F | 24.9 | 10.4 | 0.134 | 39.4 | |
Specification List Of ASTM A182 F51 Threaded Rod And Equivalent Grade Of SAF 2205® Washer.
DIN 931 S31803 Fasteners Specification List
| Specifications Of | UNS S31803 Bolts |
|---|---|
| Surface Coating | Hot Dipped Galvanizing Coated Bolts Phosphate Coated Bolts Zinc Coated Bolts Cadmium Coated Bolts Teflon Coated Bolts Xylon Coated Bolts |
| Type Of Fasteners | Hex Bolts, Hex Nuts, Screws, Studs, Threaded Rod, Washer |
| Head Type | Hex, Threading, Square, Round |
| Threads Of Fasteners | UNF UNC, BSW, METRIC, BSF |
| Standard | ASME B18.2.2 ASME B16.5 ASME B18.5 ANSI B 18.2.4 2M DIN = DIN 931, DIN 933, DIN 934, DIN 970 ISO = ISO 4033, ISO 4032, JIS UTS = UNF, NPTF, NPT, UNC, UNEF, UNS |
| Standard Sizes Of Bolts | M5, M12, M3, M14, M10, M4, M24, M16, M36, M30, M2, M20, M8, M6, M2.5 to M160 |
| Length Sizes | 3 millimeter to 200 millimeter |
| Head Style | Slotted, Six-Lobe, Phillips, Phillips/Slot etc |
ISO 4014 Duplex S31803 Bolts Shear Strength
| Size Of Metric | A1/ A2/ A4-50 (N) | A1/ A2/ A4-70 (N) | A1/ A2/ A4-80 (N) |
|---|---|---|---|
| Metric 3 | 2515 | 3521 | 4024 |
| Metric 3.5 | 3390 | 4646 | 5424 |
| Metric 4 | 4390 | 6146 | 7024 |
| Metric 5 | 7100 | 9940 | 11360 |
| Metric 6 | 10050 | 14070 | 16080 |
| Metric 7 | 14450 | 20230 | 23120 |
| Metric 8 | 18300 | 25620 | 29280 |
| Metric 10 | 29000 | 40600 | 46400 |
| Metric 12 | 42150 | 59010 | 67440 |
| Metric 14 | 57500 | 80500 | 92000 |
| Metric 16 | 78500 | 109900 | 125600 |
| Metric 18 | 96000 | 134400 | 153600 |
| Metric 20 | 122500 | 171500 | 196000 |
| Metric 22 | 151500 | 212100 | 242400 |
| Metric 24 | 176500 | 247100 | 282400 |
| Metric 27 | 229500 | 321300 | 367200 |
| Metric 30 | 280500 | 392700 | 448800 |
| Metric 33 | 408500 | 571900 | 653600 |
| Metric 36 | 408500 | 571900 | 653600 |
| Metric 39 | 488000 | 683200 | 780800 |
ASTM A182 F51 Bolts Torque Chart
| Size Range | TPI | Proof Load in LBS (Weight) | Clamp Load in LBS (Weight) | Torque Tightening (ft LBS) | ||
|---|---|---|---|---|---|---|
| Galv + Waxed | Galv | Plain | ||||
| 1⁄4 | 20 | 3,350 | 2,513 | 5 | 13 | 10 |
| 5⁄16 | 18 | 5,500 | 4,125 | 11 | 27 | 21 |
| 3⁄8 | 16 | 8,150 | 6,113 | 19 | 48 | 38 |
| 7⁄16 | 14 | 11,150 | 8,363 | 30 | 76 | 61 |
| 1⁄2 | 13 | 14,900 | 11,175 | 47 | 116 | 93 |
| 9⁄16 | 12 | 19,100 | 14,325 | 67 | 168 | 134 |
| 5⁄8 | 11 | 23,750 | 17,813 | 93 | 232 | 186 |
| 3⁄4 | 10 | 35,050 | 26,288 | 164 | 411 | 329 |
| 7⁄8 | 9 | 48,500 | 36,375 | 265 | 663 | 530 |
| 1 | 8 | 63,650 | 47,738 | 398 | 995 | 796 |
| 11⁄8 | 7 | 80,100 | 60,075 | 563 | 1,408 | 1,126 |
| 11⁄8 | 8 | 82,934 | 62,201 | 583 | 1,458 | 1,166 |
| 11⁄4 | 7 | 101,750 | 76,313 | 795 | 1,987 | 1,590 |
| 11⁄4 | 8 | 105,006 | 78,754 | 820 | 2,051 | 1,641 |
| 13⁄8 | 6 | 121,300 | 90,975 | 1,042 | 2,606 | 2,085 |
| 13⁄8 | 8 | 129,492 | 97,119 | 1,113 | 2,782 | 2,226 |
| 11⁄2 | 6 | 147,550 | 110,663 | 1,383 | 3,458 | 2,767 |
| 11⁄2 | 8 | 156,687 | 117,515 | 1,469 | 3,672 | 2,938 |
| 13⁄4 | 5 | 199,500 | 149,625 | 2,182 | 5,455 | 4,364 |
| 13⁄4 | 8 | 218,400 | 163,800 | - | - | 4,778 |
| 2 | 41⁄2 | 262,500 | 196,875 | 3,281 | 8,203 | 6,563 |
| 2 | 8 | 290,850 | 218,138 | - | - | 7,271 |
| 21⁄4 | 41⁄2 | 341,250 | 255,938 | 4,799 | 11,997 | 9,598 |
| 21⁄4 | 8 | 373,801 | 280,351 | - | - | 10,513 |
| 21⁄2 | 4 | 420,000 | 315,000 | 6,563 | 16,406 | 13,125 |
| 21⁄2 | 8 | 466,200 | 349,650 | - | - | 14,569 |
| 23⁄4 | 4 | 468,500 | 351,263 | 8,050 | 20,124 | 16,100 |
| 23⁄4 | 8 | 515,851 | 386,888 | - | - | 17,732 |
| 3 | 4 | 567,150 | 425,363 | 10,634 | 26,585 | 21,268 |
| 3 | 8 | 618,451 | 463,838 | - | - | 23,192 |
| 31⁄4 | 4 | 674,500 | 505,875 | 13,701 | 34,252 | 27,402 |
| 31⁄4 | 8 | 730,550 | 547,913 | - | - | 29,679 |
| 31⁄2 | 4 | 791,350 | 593,513 | 17,311 | 43,277 | 34,622 |
| 31⁄2 | 8 | 851,201 | 638,401 | - | - | 37,240 |
| 33⁄4 | 4 | 917700 | 688275 | 21,509 | 53,771 | 43,017 |
| 33⁄4 | 8 | 982,300 | 736,725 | - | - | 46,045 |
| 4 | 4 | 1052600 | 789450 | 26,315 | 65,788 | 52,630 |
| 4 | 8 | 1,121,950 | 841,463 | - | - | 56,098 |
Duplex Steel S31803 Hex Nuts And Bolts Dimensions Chart, ASME SA479 S31803 Screws Physical Properties.
Dimensions Of ASME SA479 S31803 Bolts
| Nominal Size Of D | Diameter Of Body | ASTM A193 Head Thickness | ASTM A193 Flats Acro | ASTM A193 Corners Acro | ||||
|---|---|---|---|---|---|---|---|---|
| D (MAXIMUM) | D (MINIMUM) | H (MAXIMUM) | H (MINIMUM) | F (MAXIMUM) | F (MINIMUM) | C (MAXIMUM) | C (MINIMUM) | |
| m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
| m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
| m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
| m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
| m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
| m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
Dimensions Of Duplex S31803 Hex Nuts
| Nominal Size Of Thread Diameter | F | G | H | ||||||
| Across Flats Width |
Across Corners Width |
Thickness Row | |||||||
| Basic | Maximum | Minimum | Maximum | Minimum | Basic | Maximum | Minimum | ||
| 1/4 | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
| 5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
| 3/8 | .3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | .337 | .479 |
| 7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
| 1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
| 9/16 | .5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | .496 | .473 |
| 5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
| 3/4 | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
| 7/8 | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
| 1 | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | .887 | .831 |
| 1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
| 1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
| 1-1/2 | 1.500 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.ASTM A194 GR. 8 | 1.245 |
| 1-5/8 | 1.6250 | 2-7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1-25/64 | 1.429 | 1.353 |
| 1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
| 2 | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
| 2-1/4 | 2.2500 | 3-3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1-15/16 | 1.986 | 1.890 |
| 2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
| 2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2-3/8 | 2.431 | 2.319 |
Dimensions Of Duplex Steel 1.4462 Stud Bolts
| Diameter | UNS S31803 Bolts Studs | |
|---|---|---|
| Plain | ||
| UNC | 8UN | |
| 1/2 | 19568 | - |
| 5/8 | 19569 | - |
| 3/4 | 19570 | |
| 7/8 | 19571 | - |
| 1 | 19572 | - |
| 11/8 | 19573 | 13979 |
| 11/4 | 19574 | 13980 |
| 13/8 | 19656 | 13981 |
| 11/2 | 19657 | 13982 |
| 13/4 | 19658 | 13983 |
| 2 | 19659 | 13984 |
| Available lengths 12 Inch ASME B18.31.3, Also available lengths Dimensions 6 Inch |
||
Dimensions Of A479 Duplex Steel S31803 Square Bolts
| Table B3 Dimensions Of Square Bolt |
||||||||
|---|---|---|---|---|---|---|---|---|
| Size Of Bolt | A (maximum) | B | C (minimum) | D | E | F Length Of Thread for Bolt Length |
||
| maximum | minimum | 6 Inch and shorter |
over 6 Inch | |||||
| 1/4" | 0.260 | 3/8 | 0.498 | 11/64 | 0.03 | 0.01 | 0.750 | 1.000 |
| 5/16" | 0.324 | 1/2 | 0.665 | 13/64 | 0.03 | 0.01 | 0.875 | 1.125 |
| 3/8" | 0.388 | 9/16 | 0.747 | 1/4 | 0.03 | 0.01 | 1.000 | 1.250 |
| 7/16" | 0.452 | 5/8 | 0.828 | 19/64 | 0.03 | 0.01 | 1.125 | 1.375 |
| 1/2" | 0.515 | 3/4 | 0.995 | 21/64 | 0.03 | 0.01 | 1.250 | 1.500 |
| 5/8" | 0.642 | 15/16 | 1.244 | 27/64 | 0.06 | 0.02 | 1.500 | 1.750 |
| 3/4" | 0.768 | 1-1/8 | 1.494 | 1/2 | 0.06 | 0.02 | 1.750 | 2.000 |
| 7/8" | 0.895 | 1-5/16 | 1.742 | 19/32 | 0.06 | 0.02 | 2.000 | 2.250 |
| 1" | 1.022 | 1-1/2 | 1.991 | 21/32 | 0.09 | 0.03 | 2.250 | 2.500 |
| 1-1/8" | 1.149 | 1-11/16 | 2.239 | 3/4 | 0.09 | 0.03 | 2.500 | 2.750 |
| 1-1/4" | 1.277 | 1-7/8 | 2.489 | 27/32 | 0.09 | 0.03 | 2.750 | 3.000 |
| 1-3/8" | 1.404 | 2-1/16 | 2.738 | 29/32 | 0.09 | 0.03 | 3.000 | 3.250 |
| 1-1/2" | 1.531 | 2-1/4 | 2.986 | 1 | 0.09 | 0.03 | 3.250 | 3.500 |
Alloy S31803 Heavy Hex Bolts Dimensions Chart
| Nominal Size Of D | Diameter Of Body | Thickness Of Head | Flats Across | Bolts Corners Across | ||||
|---|---|---|---|---|---|---|---|---|
| D (Maximum) | D (Minimum) | H (Maximum) | H (Minimum) | F (Maximum) | F (Minimum) | C (Maximum) | C (Minimum) | |
| m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
| m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
| m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
| m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
| m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
| m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
Reliable DSS A276 S31803 Studs Manufacturer In India And Get Duplex 2205 S31803 Nuts Bolts At Best Price.
Dimensions Of Duplex Stainless Steel S31803 Heavy Hex Nuts
Nominal Size For Thread Diameter |
F |
G |
H |
||||||
Width Of Across Flats |
Width Of Across Corners |
Thickness Table |
|||||||
Basic |
Maximum |
Minimum |
Maximum |
Minimum |
Basic |
Maximum |
Minimum |
||
1/4 |
.2500 |
7/16 |
.438 |
.428 |
.505 |
.488 |
7/32 |
.226 |
.212 |
5/16 |
.3125 |
1/2 |
.500 |
.489 |
.577 |
.557 |
17/64 |
.273 |
.258 |
3/8 |
.3750 |
9/16 |
.562 |
.551 |
.650 |
.628 |
21/64 |
.337 |
.479 |
7/16 |
.4375 |
11/16 |
.688 |
.675 |
.794 |
.768 |
3/8 |
.385 |
.365 |
1/2 |
.5000 |
3/4 |
.750 |
.736 |
.866 |
.840 |
7/16 |
.448 |
.427 |
9/16 |
.5625 |
7/8 |
.875 |
.861 |
1.010 |
.982 |
31/64 |
.496 |
.473 |
5/8 |
.6250 |
15/16 |
.938 |
.922 |
1.083 |
1.051 |
35/64 |
.559 |
.535 |
3/4 |
.7500 |
1-1/8 |
1.125 |
1.088 |
1.299 |
1.240 |
41/64 |
.665 |
.617 |
7/8 |
.8750 |
1-5/16 |
1.312 |
1.269 |
1.516 |
1.447 |
3/4 |
.776 |
.724 |
1 |
1.0000 |
1-1/2 |
1.500 |
1.450 |
1.732 |
1.653 |
55/64 |
.887 |
.831 |
1-1/8 |
1.1250 |
1-11/16 |
1.688 |
1.631 |
1.949 |
1.859 |
31/32 |
.999 |
.939 |
1-3/8 |
1.3750 |
2-1/16 |
2.062 |
1.994 |
2.382 |
2.273 |
1-11/64 |
1.206 |
1.138 |
1-1/2 |
1.500 |
2-1/4 |
2.250 |
2.175 |
2.598 |
2.480 |
1-9/32 |
1.ASTM A194 GR. 8 |
1.245 |
1-5/8 |
1.6250 |
2-7/16 |
2.438 |
2.356 |
2.815 |
2.686 |
1-25/64 |
1.429 |
1.353 |
1-3/4 |
1.7500 |
2-5/8 |
2.625 |
2.538 |
3.031 |
2.893 |
1-1/2 |
1.540 |
1.460 |
2 |
2.0000 |
3 |
3.000 |
2.900 |
3.464 |
3.306 |
1-23/32 |
1.763 |
1.675 |
2-1/4 |
2.2500 |
3-3/8 |
3.375 |
3.263 |
3.897 |
3.719 |
1-15/16 |
1.986 |
1.890 |
2-1/2 |
2.5000 |
3-3/4 |
3.750 |
3.625 |
4.330 |
4.133 |
2-5/32 |
2.209 |
2.105 |
2-3/4 |
2.7500 |
4-1/8 |
4.125 |
3.988 |
4.763 |
4.546 |
2-3/8 |
2.431 |
2.319 |
ASTM Duplex S31803 Socket Head Cap Screw Dimensions Chart
Nominal Size Of D |
Diameter Of Body |
Thickness Of Head |
Flats Across |
Bolts Corners Across |
||||
|---|---|---|---|---|---|---|---|---|
D (Maximum) |
D (Minimum) |
H (Maximum) |
H (Minimum) |
F (Maximum) |
F (Minimum) |
C (Maximum) |
C (Minimum) |
|
m10 |
10.00 |
9.78 |
6.63 |
6.17 |
17.00 |
15.73 |
18.48 |
17.77 |
m12 |
12.00 |
11.73 |
7.76 |
4.24 |
19.00 |
17.73 |
20.78 |
20.03 |
m14 |
14.00 |
13.73 |
9.09 |
8.51 |
22.00 |
20.67 |
24.25 |
23.35 |
m16 |
16.00 |
15.73 |
10.32 |
9.68 |
24.00 |
23.67 |
27.71 |
26.75 |
m20 |
20.00 |
19.67 |
12.88 |
12.12 |
30.00 |
29.16 |
34.64 |
32.95 |
m24 |
24.00 |
23.67 |
15.44 |
14.56 |
36.00 |
35.00 |
41.57 |
39.55 |
m30 |
30.00 |
29.67 |
19.48 |
17.92 |
46.00 |
45.00 |
53.12 |
50.85 |
m36 |
36.00 |
35.61 |
23.38 |
21.63 |
55.00 |
53.80 |
63.51 |
60.79 |
m42 |
42.00 |
41.38 |
26.97 |
25.03 |
65.00 |
62.90 |
75.06 |
71.71 |
m48 |
48.00 |
47.38 |
31.07 |
28.93 |
75.00 |
72.60 |
86.60 |
82.76 |
m56 |
56.00 |
55.26 |
36.2 |
33.80 |
85.00 |
82.20 |
98.15 |
93.71 |
m64 |
64.00 |
63.26 |
41.32 |
38.68 |
95.00 |
91.80 |
109.70 |
104.65 |
m72 |
72.00 |
71.26 |
46.45 |
43.55 |
105.00 |
101.40 |
121.24 |
115.60 |
m80 |
80.00 |
79.26 |
51.58 |
48.42 |
115.00 |
111.00 |
132.72 |
126.54 |
m90 |
90.00 |
89.13 |
57.74 |
54.26 |
130.00 |
125.50 |
150.11 |
143.07 |
m100 |
90.00 |
99.13 |
63.9 |
60.10 |
145.00 |
140.00 |
167.43 |
159.60 |
ASME SA182 F60 Threaded Rod Dimensions Chart
| D | P |
D
|
P |
|---|---|---|---|
| M2 | 0.4 | M20 | 1.5/2.5 |
| M2.5 | 0.45 | M22 | 1.5/2.5 |
| M3 | 0.5 | M24 | 2/3 |
| M3.5 | 0.6 | M27 | 2/3 |
| M4 | 0.7 | M30 | 2/3.5 |
| M5 | 0.8 | M33 | 2/3.5 |
| M6 | 1 | M36 | 3/4 |
| M8 | 1/1.25 | M39 | 3/4 |
| M10 | 1/1.25/1.5 | M42 | 3/4.5 |
| M12 | 1.25/1.5/1.75 | M45 | 3/4.5 |
| M14 | 1.5/2 | M48 | 3/5 |
| M16 | 1.5/2 | M52 | 3/5 |
| M18 | 1.5/2.5 |
UNS S31803 Flat Washer Dimensions Chart
Size Table |
USS |
SAE |
||||
|---|---|---|---|---|---|---|
Inside Diameter (I.D.) Of (A) |
Outside Diameter (O.D.) Of (B) |
Thickness Of (C) |
I.D. Of (A) |
O.D. Of (B) |
Thickness Of (C) |
|
#2 |
- |
- |
- |
3/32" |
1/4" |
0.020" |
#4 |
- |
- |
- |
1/8" |
5/16" |
0.032" |
#6 |
- |
- |
- |
5/32" |
3/8" |
0.049" |
#8 |
- |
- |
- |
3/16" |
7/16" |
0.049" |
Duplex Steel UNS S31803 Nuts Size Chart
Size Of Nut (millimeter) |
Diameter Of (millimeter) |
Height Table (millimeter) |
||
|---|---|---|---|---|
Hex Nut |
Jam Nut |
Nylock Nut |
||
2 |
4 |
1.6 |
1.2 |
- |
2.5 |
5 |
2 |
1.6 |
- |
3 |
5.5 |
2.4 |
1.8 |
4 |
4 |
7 |
3.2 |
2.2 |
5 |
5 |
8 |
4 |
2.7 |
5 |
6 |
10 |
5 |
3.2 |
6 |
7 |
11 |
5.5 |
3.5 |
- |
8 |
13 |
6.5 |
4 |
8 |
10 |
17 |
8 |
5 |
10 |
12 |
19 |
10 |
6 |
12 |
14 |
22 |
11 |
7 |
14 |
16 |
24 |
13 |
8 |
16 |
18 |
27 |
15 |
9 |
18.5 |
20 |
30 |
16 |
10 |
20 |
S31803 Duplex Steel Threaded Rod Size Chart
|
Size Table Of UNS S31803 Threaded Rod
|
per Inch Threads
|
||
|---|---|---|---|
|
Frac. [Number]
|
Decimal
|
UNC
|
UNF
|
|
1/8 [#6]
|
0.1380
|
32
|
40
|
|
5/32 [#8]
|
0.1640
|
32
|
36
|
|
3/16 [#10]
|
0.1900
|
24
|
32
|
|
1/4
|
0.2500
|
20
|
28
|
|
5/16
|
0.3125
|
18
|
24
|
|
3/8
|
0.3750
|
16
|
24
|
|
7/16
|
0.4375
|
14
|
20
|
|
1/2
|
0.5000
|
13
|
20
|
|
9/16
|
0.5625
|
12
|
18
|
|
5/8
|
0.6250
|
11
|
18
|
|
3/4
|
0.7500
|
10
|
16
|
|
7/8
|
0.8750
|
9
|
14
|
|
1
|
1.0000
|
8
|
12, 14
|
|
1 1/8
|
1.1250
|
7
|
12
|
|
1 1/4
|
1.2500
|
7
|
12
|
|
1 3/8
|
1.3750
|
6
|
12
|
|
1 1/2
|
1.5000
|
6
|
12
|
|
1 3/4
|
1.7500
|
5
|
–
|
Most Reliable Supplier Of AISI 2205 F51 Hex Machine Bolt And Stainless Steel Duplex UNS S31803 Fasteners In India.
ASTM A276 Type S31803 Screws Size Chart
UNS S31803 Fasteners Weight Chart
| Weight Chart Of Machine Screws ( Type 1, 23,) F Or G Tapping Screws LBS. Per 1000 pieces |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Diameters Row |
|||||||||||
| Lengths Row | #2 | #3 | #4 | #5 | #6 | #8 | #10 | #12 | 1/4″ | 5/16″ | 3/8″ |
| 1/8 | 0.40 | 0.55 | 0.70 | 1.1 | 1.4 | — | — | — | — | — | — |
| 3/16 | 0.50 | 0.70 | 0.90 | 1.2 | 1.5 | 2.5 | 3.9 | — | — | — | — |
| 1/4 | 0.60 | 0.80 | 1.00 | 1.4 | 1.7 | 2.8 | 4.3 | 5.6 | 8.5 | — | — |
| 5/16 | 0.60 | 0.90 | 1.20 | 1.5 | 1.9 | 3.1 | 4.6 | 6.1 | 9.1 | 16.7 | — |
| 3/8 | 0.70 | 0.90 | 1.30 | 1.7 | 2.1 | 3.4 | 5.0 | 6.5 | 9.8 | 17.7 | 29.2 |
| 7/16 | 0.80 | 1.00 | 1.50 | 1.9 | 2.2 | 3.6 | 5.4 | 6.9 | 10.4 | 18.8 | 30.7 |
| 1/2 | 0.80 | 1.10 | 1.60 | 2.0 | 2.4 | 3.9 | 5.8 | 7.4 | 11.1 | 19.8 | 32.2 |
| 9/16 | 0.90 | 1.20 | 1.70 | 2.2 | 2.6 | 4.2 | 6.2 | 7.8 | 11.7 | 20.9 | 33.6 |
| 5/8 | 1.00 | 1.30 | 1.80 | 2.3 | 2.8 | 4.5 | 6.6 | 8.3 | 12.4 | 21.9 | 35.1 |
| 3/4 | 1.10 | 1.50 | 2.10 | 2.6 | 3.2 | 5.0 | 7.3 | 9.2 | 13.6 | 24.0 | 38.0 |
| 7/8 | 1.30 | 1.70 | 2.30 | 3.0 | 3.5 | 5.6 | 8.1 | 10.1 | 14.9 | 26.1 | 41.0 |
| 1″ | 1.40 | 1.90 | 2.50 | 3.4 | 3.9 | 6.2 | 8.9 | 11.0 | 16.1 | 28.8 | 44.0 |
| 1-1/8″ | 1.50 | 2.00 | 2.80 | 3.8 | 4.3 | 6.7 | 9.6 | 11.9 | 17.4 | 30.2 | 47.0 |
| 1-1/4″ | 1.60 | 2.20 | 3.00 | 4.1 | 4.6 | 7.3 | 10.4 | 12.8 | 18.7 | 32.3 | 49.8 |
| 1-1/2″ | 1.80 | 2.50 | 3.50 | 4.7 | 5.3 | 8.3 | 11.9 | 14.7 | 21.2 | 36.5 | 55.8 |
| 1-3/4″ | 2.10 | 2.90 | 4.00 | 5.3 | 6.1 | 9.4 | 13.5 | 16.5 | 23.7 | 40.7 | 61.7 |
| 2″ | 2.40 | 3.30 | 4.50 | 6.0 | 6.8 | 10.6 | 15.0 | 18.3 | 26.2 | 44.8 | 67.6 |
| 2-1/4″ | 2.60 | 3.60 | 5.00 | 6.7 | 7.6 | 11.8 | 16.6 | 20.1 | 28.8 | 19.0 | 73.5 |
| 2-1/2″ | 2.80 | 3.90 | 5.50 | 7.3 | 8.3 | 12.9 | 18.1 | 22.0 | 31.3 | 53.2 | 79.5 |
| 2-3/4″ | 3.10 | 4.30 | 6.00 | 7.9 | 9.1 | 13.9 | 19.7 | 23.8 | 33.9 | 57.3 | 85.3 |
| 3″ | 3.40 | 4.70 | 6.50 | 8.6 | 9.8 | 15.0 | 21.2 | 25.6 | 36.4 | 61.5 | 91.3 |
Accept All Small And Large Orders Type Of UNS S31803 Bolts
Duplex 2205 S31803 Allen Cap Bolt
UNS S31803 Flange Bolts
DIN 1.4462 Eye Bolt
S31803 Duplex Steel Square U Bolts
SAF S31803 Anchor Bolts
Alloy S31803 Hex Bolts
ASTM A182 F51 Heavy Hex Bolts
ASME SA182 F60 Carriage Bolts
Duplex 2205 S31803 Hex Screws
UNS S31803 Self Tapping Screws
DIN 1.4462 Wood Screws
S31803 Duplex Steel Eye Screws
SAF S31803 Self Locking Nuts
Alloy S31803 Lock Nut
A182 F51 Heavy Hex Nuts
SA182 F60 Eye Nuts
Duplex Steel S31803 Belleville Washers
UNS S31803 Star Washers
DIN 1.4462 Flat Washers
S31803 Duplex Steel Split Washers
Countries We Have Supplied Recently:
| UNS S31803 Bolts | Chile, Italy, Iran, Singapore |
| UNS S31803 Fasteners | Norway, Malaysia, United Arab Emirates (UAE), Turkey |
| Duplex Steel 1.4462 Threaded Rod | Indonesia, Belgium, Dammam -KSA, Philippines. |
| DIN 1.4462 Hex Nuts | Malaysia, Philippines, Canada, Singapore |
| ASTM A479 Duplex S31803 Studs | UK, Mexico, Egypt, Spain |
| Duplex S31803 Wood Screws | Bahrain, South Africa, Singapore |
| ASTM A182 F51 Stud Bolts | Thailand, France, Europe, Qatar |
| ASTM A276 Type UNS S31803 Nuts And Bolts | Czechia, Malaysia, Germany, Thailand |
| Duplex SS UNS S31803 Bolts | Sweden, China, Colombia, Malaysia |
| ASTM A1082 UNS S31803 Studs | Netherlands, Russia, Dubai, Malaysia |
| DSS ASTM A276 UNS S31803 Screws | Saudi Arabia (KSA), Kuwait, South Africa, Brazil |
| A276 Gr UNS S31803 Washer | Australia, Philippines, Nigeria, UK |
| S31803 Threaded Rod | Hong Kong, Oman, Malaysia, UAE |
| Duplex SS UNS S31803 Hex Head Lag Screw | Malaysia, USA, Finland, Bangladesh |
| Polished Duplex S31803 Washer | Poland, Canada, Ellington -United States, UK |
| ASTM A276 Type S31803 Pan Head Screw | Europe, UAE, United Kingdom -UK, Malaysia |
| ASME SA 479 S31803 Wheel Nuts and Caps | Malaysia, Japan, Europe, Romania |