Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

Chrome Moly Pipe Fittings

Biggest Chrome Moly Buttweld Pipe Fittings Manufacturer In India And Standard Specification Of Chromoly Stub End.

Chrome Moly Pipe Fittings

Chrome Moly Pipe Fittings

Chrome Moly Fittings

Chrome Moly Fittings

Chromoly Weld Fittings

Chromoly Weld Fittings

Table Of Contents


Chrome Moly Pipe Fittings Higher Working Temperatures?

What makes these Chrome Moly Fittings better than mild steel grade fittings is that this alloy is much more stronger and tougher. For instance, the added Molybdenum content in the Chrome Moly 45 degree Elbow gives the steel higher working temperatures as well as added tensile strength. The addition of element Chromium in these Chrome Moly Buttweld Pipe Fittings results in exceptional resistance against oxidation. Further chromium also aids this steel grade Chrome Moly Reducer to resist corrosion in a more effective manner.


Chrome Moly Pipe Fittings


Chromoly Reducer Have Good Hardness Penetration?

Additionally, the content of Chromium in the 4142 chromoly alloy steel eccentric reducer is what provides the metal with good hardness penetration, and the content of Molybdenum in the chrome molybdenum steel 45 deg elbow is what guarantees the hardness is uniform in this metal.


Chrome Moly Fittings-based Alloy Steel?

Hence, the enhancement with regards to the tensile strength as well as extra corrosion resistance of the scm420 chromoly steel alloy stub ends means this chromium- molybdenum based alloy is perfect for those environments where the temperature settings can rise to an elevated level.


Chromoly Weld Fittings Used Oil And Gas Industries?

Apart from being used in industries such as oil and gas, energy, automotive, metal production, and forming equipment, the 4150v Chrome Moly Fittings can also be used in saltwater applications, where the metal is also found to be effective.


Chromoly Fittings Used In High-temperature Environments?

In fact, these chrome moly weld fittings can not only be used in high temperature environments, but also in those settings where the pressure applied is high as well. Although one disadvantage is that the 4140 Chrome Moly Fittings is difficult to machine. This is because the material used to produce Chrome Moly Steel Weld Fitting exhibits properties such as its high strength, wear resistance, good toughness as well as low thermal conductivity. A combination of these properties poses difficulties in the machining of chrome moly pipe fittings.


Chrome Moly Buttweld Fittings Specification Chart

Specification: Chrome Moly Pipe Fittings
Schedule: Schedule 5 TO Schedule XXS.
Size: Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48”
Type: Butt Weld (BW) Fittings, Seamless (SMLS) Fittings, Welded Fittings
Thickness: Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc.
Type Of Dimension: BS1640 Fittings, EN 10253 - 4 Fittings, DIN 2605 Fittings, JIS B2312 Fittings, ANSI B16.9 Fittings, MSS SP-75 Fittings, ANSI B16.28 Fittings, MSS-SP-43 Type A Fittings, MSS-SP-43 Type B Fittings, JIS B2313 Fittings
Standard EN Fittings, ISO Fittings, DIN Fittings, JIS Fittings, NPT Fittings
Type Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross,
Connection Type Threaded/ Clamp End / End Bell / Weld/ Flange/
Pressure-Temperature Class 150LB, 300LB, 600LB, 1500LB, 2500LB.

Largest Chromoly Weld Fittings Supplier In India And Chrome Moly Elbow Dimensions Chart According to ASME B16.9.


Chrome-Moly Pipe Fittings Chemical Analysis


WPB B,C,D,E,
WPC C,D,E, A234 WP11 CL1 ASTM A234 WP11 CL2, ASTM A234 WP11 CL3 A234 WP22 CL1 ASTM A234 WP22 CL3 A234 WP5 CL1, ASTM A234 WP5 CL3
Carbon 0.3 0.35 0.05–0.15 0.05–0.20 0.05–0.20 0.05–0.15 0.05–0.15 0.15 0.15
Manganese 0.29–1.06 0.29–1.06 0.30–0.60 0.30–0.80 0.30–0.80 0.30–0.60 0.30–0.60 0.30–0.60 0.30–0.60
Phosporus 0.05 0.05 0.03 0.04 0.04 0.04 0.04 0.04 0.04
Sulfur 0.058 0.058 0.03 0.04 0.04 0.04 0.04 0.03 0.03
Silicon 0.10 minimum 0.10 minimum 0.50–1.00 0.50–1.00 0.50–1.00 0.5 0.5 0.5 0.5
Chromium 0.4 0.4 1.00–1.50 1.00–1.50 1.00–1.50 1.90–2.60 1.90–2.60 4.0–6.0 4.0–6.0
Molybdenum 0.15 maximum 0.15 maximum 0.44–0.65 0.44–0.65 0.44–0.65 0.87–1.13 0.87–1.13 0.44–0.65 0.44–0.65
Nickel 0.4 0.4
Copper 0.4 0.4
Others Vanadium 0.08 Vanadium 0.08

Chrome Moly Seamless Fittings Mechanical Behavior

Grade Tensile Strength, minimum. ksi[MPa] Yield Strength, minimum. ksi[MPa] Elongation, minimum. %
Longitudinal Transverse
A234 WP1 55-80[380-550] 30[205] 20 13
A234 WP12 CL1 60[415] 32[220] 22 14
A234 WP12 CL2 70[485] 40[275] 22 14
A234 WP11 CL1 60[415] 30[205] 22 14
ASTM A234 WP11 CL2 70[485] 40[275] 22 14
ASTM A234 WP11 CL3 75[520] 45[310] 22 14
ASTM A234 WP22 CL1 60[415] 30[205] 22 14
A234 WP22 CL3 75[520] 45[310] 22 14
A234 WP24 85[585] 60[415] 20 -
A234 WP5 CL1 60[415] 30[205] 22 14
ASTM A234 WP5 CL3 75[520] 45[310] 22 14
WP9 CL1 60[415] 30[205] 22 14
WP9 CL3 75[520] 45[310] 22 14
WPR 63-99[435-605] 46[315] 20 -
WP91 90[620] 60[415] 20 13
WP911 90-120[620-840] 64[440] 20 13
WP92 90-120[620-840] 64[440] 20 13


Chrome Moly Elbow Dimensions Chart

NPS O.D. 90 Degree Elbow 45 Degree Elbow 180 Degree Return
(inch) Long Radius Elbow Short Radius Long Radius Elbow Long Radius Elbow
(millimeter) (inch) Center to Face
(inch)
Center to Face
(inch)
Center to Face
(inch)
Radius
(inch)
Center to Center
(inch)
Back to face
(inch)
1/2 21.3 0.840 1 1/2 5/8 2 1 7/8
3/4 26.7 1.050 1 1/8 7/16 2 1/4 1 11/16
1 33.4 1.315 1 1/2 1 7/8 3 2 3/16
1 1/4 42.2 1.660 1 7/8 1 1/4 1 3 3/4 2 3/4
1 1/2 48.3 1.900 2 1/4 1 1/2 1 1/8 3 4 1/2 3 1/4
2 60.3 2.375 3 2 1 3/8 4 6 4 3/16
2 1/2 73.0 2.875 3 3/4 2 1/2 1 3/4 5 7 1/2 5 3/16
3 88.9 3.500 4 1/2 3 2 6 9 6 1/4
3 1/2 101.6 4.000 5 1/4 3 1/2 2 1/4 7 10 1/2 7 1/4
4 114.3 4.500 6 4 2 1/2 8 12 8 1/4
5 141.3 5.563 7 1/2 5 3 1/8 10 15 10 5/16
6 168.3 6.625 9 6 3 3/4 12 18 12 5/16
8 219.1 8.625 12 8 5 12 24 16 5/16
10 273.1 10.750 15 10 6 1/4 15 30 20 3/8
12 323.9 12.750 18 12 7 1/2 18 36 24 3/8

NPS O.D. Pipe End Caps Straight Tee Straight Cross Long / Short Stub Ends
(inch.) (millimeter) (inch.) Length
(inch.)
Center to End
(inch.)
Center to End
(inch.)
Lap Diameter
(inch.)
Long Length
(inch.)
Short Length
(inch.)
1/2 21.3 0.840 1 1 1 3/8 3 2
3/4 26.7 1.050 1 1 1/8 1 11/16 3 2
1 33.4 1.315 1 1/2 1 1/2 1 1/2 2 4 2
1 1/4 42.2 1.660 1 1/2 1 7/8 1 7/8 2 1/2 4 2
1 1/2 48.3 1.900 1 1/2 2 1/4 2 1/4 2 7/8 4 2
2 60.3 2.375 1 1/2 2 1/2 2 1/2 3 5/8 6 2 1/2
2 1/2 73.0 2.875 1 1/2 3 3 4 1/8 6 2 1/2
3 88.9 3.500 2 3 3/8 3 3/8 5 6 2 1/2
3 1/2 101.6 4.000 2 1/2 3 3/4 3 3/4 5 1/2 6 3
4 114.3 4.500 2 1/2 4 1/8 4 1/8 6 3/16 6 3
5 141.3 5.563 3 4 7/8 4 7/8 7 5/16 8 3
6 168.3 6.625 3 1/2 5 5/8 5 5/8 8 1/2 8 3 1/2
8 219.1 8.625 4 7 7 10 5/8 8 4
10 273.1 10.750 5 8 1/2 8 1/2 12 3/4 10 5
12 323.9 12.750 6 10 10 15 10 6

Wide Stockist Of Chrome Moly Fittings In Mumbai, India And Chrome Moly Pipe Tee Weight Chart Table.


Chrome Moly Pipe Tee Weight Chart

DN (Normal Pipe Sizes)

Sch 10S

Sch 40S

Sch 80S

90 Deg Elbow

45 Deg Elbow Equal Pipe tee

90 Deg Elbow

45 Deg Elbow

Equal Pipe tee

90 Deg Elbow 45 Deg Elbow

Equal Pipe Tee

8

0.02

0.01

0.03

0.03

0.02

0.06

0.04

0.03

0.07

10

0.03

0.02

0.05

0.03

0.02

0.03

0.06

0.04

0.09

15

0.06

0.03

0.09

0.08

0.04

0.10

0.10

0.05

0.14

20

0.07

0.03

0.13

0.08

0.04

0.17

0.11

0.05

0.20

25

0.14

0.08

0.28

0.15

0.11

0.29

0.22

0.14

0.38

32

0.23

0.11

0.49

0.26

0.17

0.59

0.40

0.23

0.68

40

0.30

0.17

0.68

0.40

0.23

0.86

0.51

0.29

1.02

50

0.50

0.25

0.85

0.70

0.4

1.28

0.91

0.59

1.59

65

0.85

0.48

1.41

1.40

0.77

2.19

1.81

0.99

3.13

80

1.25

0.63

1.77

2.20

1.08

3.31

2.97

1.50

4.45

90

1.70

0.75

2.67

2.83

1.42

4.08

4.00

2.00

5.44

100

2.10

1.08

3.46

4.47

2.09

5.27

6.18

2.81

7.71

150

5.45

2.72

8.07

10.89

5.44

10.99

16.32

8.16

13.61

200

10.20

5.33

15.65

21.54

10.77

20.91

33.11

16.56

28.12

250

18.15

9.75

26.46

38.56

19.27

35.38

51.71

25.86

49.90

300

25.80

13.62

39.46

59.42

29.71

62.14

79.38

39.69

83.91

DN (Normal Pipe Sizes)

Sch 10S

Sch 40S

Sch 80S

Con Pipe Reducer Ecc Pipe Reducer Reducing/ Unequal Tee Con Pipe Reducer Ecc Pipe Reducer Reducing/ Unequal Tee Con Pipe Reducer Ecc Pipe Reducer Reducing/ Unequal Tee

40x.25

0.19

0.19

0.60

0.26

0.26

0.76

0.34

0.34

0.90

50x25

0.28

0.28

0.73

0.40

0.40

1.10

0.54

0.54

1.37

50x40

0.31

0.31

0.76

0.45

0.45

1.15

0.59

0.59

1.43

80x.50

0.55

0.55

1.56

1.00

1.00

2.91

1.79

1.79

3.91

100x50

0.78

0.78

2.94

1.50

1.50

4.48

1.95

1.95

6.55

100x80

0.87

0.87

3.04

1.74

1.74

4.64

2.33

2.33

6.79

150x80

1.82

1.82

6.86

3.95

3.95

9.68

5.51

5.51

11.57

150x100

1.96

1.96

7.10

4.07

4.07

11.94

5.96

5.96

11.97

200x100

3.01

3.01

13.46

6.55

6.55

17.98

9.23

9.23

24.18

200x150

3.19

3.19

14.08

6.74

6.74

18.82

10.12

10.12

25.31


We Provide Chrome Moly Pipe End Cap With Good Quality And Chrome Moly Reducer Pressure Rating Chart.

Chrome Moly Reducer Pressure Rating Chart

Pressure-Temperature ratings for Chrome Moly Pipe Fittings (psig)
Temperature RatingsPressure Class
150300
1/4 - 1 inch.1 1/4 - 2 inch.2 1/2 - 3 inch.
(oF)(oC)
-20 to 150 -29 to 66 300 2000 1500 1000
200 93 265 1785 1350 910
250 121 225 1575 1200 825
300 149 185 1360 1050 735
350 177 150 1150 900 650
400 204 - 935 750 560
450 232 - 725 600 475
500 260 - 510 450 385
550 288 - 300 300 300

Chromoly Weld Fittings Tolerance Chart

Chrome Moly Pipe Fittings Tolerance 90 Degree & 45 Degree
Elbows & Tees
Reducers
& Lap Joint
Stub End
Pipe Caps
Chrome Moly Fittings (Normal Pipe Size) O.
D.
at Bevel
I.
D.
at End
Wall Thick. T Center-to-End
Dimension
A ,C ,B
Over-all
Length H
Over-all
Length F
1/2 to 2-1/2 +0.06 Not less than 87.5%
of nominal thickness
+/- 0.06 +/- 0.06 +/- 0.12
-0.03
3 to 3-1/2 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.12
4 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.12
5 to 8 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.25
10 to 18 +0.16 +/- 0.12 +/- 0.09 +/- 0.09 +/- 0.25
-0.12
20 to 24 +0.25 +/- 0.19 +/- 0.09 +/- 0.09 +/- 0.25
-0.19
26 to 30 +0.25 +/- 0.19 +/- 0.12 +/- 0.19 +/- 0.38
-0.19
32 to 48 +0.25 +/- 0.19 +/- 0.19 +/- 0.19 +/- 0.38
-0.19

We ProvideOnline Payment Options Types Of Chrome Moly Pipe Fittings

8 X 8 Inch, SCH120, Chrome Moly 45° Elbow

8 X 8 Inch, SCH120, Chrome Moly 45° Elbow

4 Inch, SCH 120, BW, Chrome Moly 90° Elbow

4 Inch, SCH 120, BW, Chrome Moly 90° Elbow

6 Inch, SCH XXS, BW, ASME B16.9, Chrome Moly Steel Equal Tee

6 Inch, SCH XXS, BW, ASME B16.9, Chrome Moly Steel Equal Tee

DN450, BW, ASME B16.9, Chrome Moly Concentric Reducer

DN450, BW, ASME B16.9, Chrome Moly Concentric Reducer

8 Inch, Galvanized, Chrome Moly Eccentric Reducer

8 Inch, Galvanized, Chrome Moly Eccentric Reducer

4 Inch, SCH 80, BW, Alloy Steel Chrome Moly Long Radius Elbow

4 Inch, SCH 80, BW, Alloy Steel Chrome Moly Long Radius Elbow

18 Inch, BW, Chrome Moly Seamless Short Radius Elbow

18 Inch, BW, Chrome Moly Seamless Short Radius Elbow

4 Inch, SCH 60, Chrome Moly End Pipe Cap

4 Inch, SCH 60, Chrome Moly End Pipe Cap

2 Inch, SCH 80, Chrome Moly Steel Stub End

2 Inch, SCH 80, Chrome Moly Steel Stub End

1/3 Inch, Beveled End, Low Chrome Moly SW Equal Cross

1/3 Inch, Beveled End, Low Chrome Moly SW Equal Cross

2 Inch, SCH 14, Butt Weld, Chrome Moly Reducing Tee

2 Inch, SCH 14, Butt Weld, Chrome Moly Reducing Tee

1/4 Inch, 36.53mm, ASME B16.9, Chrome Moly Reducing Cross

1/4 Inch, 36.53mm, ASME B16.9, Chrome Moly Reducing Cross

4 Inch, SCH 40, Buttweld, Chrome Moly Alloy Steel Pipe Bends

4 Inch, SCH 40, Buttweld, Chrome Moly Alloy Steel Pipe Bends

36 X 18 Inch, SCH 20, Chrome Moly Lateral Tee

36 X 18 Inch, SCH 20, Chrome Moly Lateral Tee


Some Of The Major Locations We Have Supplied Chrome Moly Pipe Fittings:

Chromoly Weld Fittings South Africa, Kuwait, Brazil, Saudi Arabia (KSA)
Chrome Moly Fittings Nigeria, Australia, Philippines, UK
Chrome Moly Pipe Fittings Malaysia, Hong Kong, Oman, UAE
Chrome Moly Buttweld Pipe Fittings Singapore, Bahrain, South Africa
Chromoly Stub End Italy, Iran, Chile, Singapore
Chromoly Weld Fittings Turkey, Norway, Malaysia, United Arab Emirates (UAE)
Chrome Moly Elbow Dammam -KSA, Belgium, Philippines, Indonesia.
Chrome Moly Fittings Canada, Malaysia, Philippines, Singapore
Chrome Moly Pipe Tee Europe, Romania, Japan, Malaysia
Chrome Moly Pipe End Cap Colombia, Sweden, China, Malaysia
Chrome Moly Reducer Netherlands, Russia, Dubai, Malaysia


About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Rajtilak Metal © 2021 All Right Reserved. Website Designed And SEO by Mesotek
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy