Carbon Steel Pipe Fittings
CS Buttweld Tee and Low Carbon Steel Elbow manufacturer in India.

Carbon Steel Pipe Fittings Manufacturers In India

Carbon Steel Buttweld Fittings Pressure Rating

Carbon Steel Weld Fittings Price List
Table Of Contents
- What Are Carbon Steel Fittings Used For?
- CS Fittings Used In Nuclear Power Plants?
- Carbon Steel Weld Fittings Applied To Connect Two Pipe?
- Carbon Steel Pipe Fittings Price List In India
- ASME B16.9 Carbon Steel Pipe Fittings Specification
- Carbon Steel Fittings Dimensions
- Schedule 40 Carbon Steel Fittings Dimensions
- Schedule 80 Carbon Steel Buttweld Fittings Dimensions
- CS Fittings Weight Chart
- Carbon Steel Fittings Pressure Rating
- Tolerance Chart Of Large Diameter Carbon Steel Pipe Fittings
- High Yield Carbon Steel Fittings Gasket Size Chart
- Normalized Carbon Steel Fittings Chemical Composition
- Galvanized CS Fittings Mechanical Properties
- We Stock And Supply Types Of Carbon Steel Pipe Fittings

Don't forget to compare our price with other Carbon Steel Pipe Fittings manufacturers in India, Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.
What Are Carbon Steel Fittings Used For?
Carbon Steel Pipe Fittings are a accessories used to connect pipes or other fittings together in a piping systems; these are also made from carbon steel. CS Fittings are pipe fittings that are made up of carbon steel and have sockets attached to their ends for better accommodation of pipe endings into them. Carbon Steel Socket Weld Pipe Fittings are stronger and much durable due to their socket welds. There are Carbon Steel Weld Fittings which use screws to be connected into the system. The type Large Diameter Carbon Steel Pipe Fittings which reduce the liquid flow volume by reducing the diameter at the connection. We Are Carbon Steel Fittings Manufacturer In India. CS Seamless Fittings are applied with seamless piping to maintain the system in equilibrium.
CS Fittings Used In Nuclear Power Plants?
Carbon Steel Pipe Fittings used in various applications such as the chemical industries, food and beverages industries, water supply lines, pollution control systems, waste water management systems, water desalination plants, nuclear power plants and just about any system that uses piping. There are different parameters that are governed by different schedules such as the Galvanized Carbon Steel Fittings and the Schedule 10 Carbon Steel Fittings There are specific types like the Carbon Steel Swagelok Fittings which are produced for precision fittings. The Normalized Carbon Steel Fittings as well as the Large Bore Carbon Steel Fittings are common in the range of carbon steel fittings.
Carbon Steel Weld Fittings Applied To Connect Two Pipe?
There are opportunities when pipes have threads and High Yield Carbon Steel Fittings have to be applied to connect two pipes with threads. The Carbon Steel Threaded Fittings also have the advantage of ease of application by the addition of threads. Some Carbon Steel Tubing Fittings are strengthened by CS Buttweld Fittings and some others with Carbon Steel Forged Pipe Fittings. The Carbon Steel Grooved Fittings are also applied as and when required. The Carbon Steel Pipe Fittings can differ according to use as well.
Carbon Steel Pipe Fittings Price List In India | |||||
---|---|---|---|---|---|
Type Of Fittings | Size | Material | Grade | Price In India (INR) | |
45 Deg Elbow | 6" X SCH 40 | Carbon Steel | ASTM A234 WPB | 630.00 | |
45 Deg Elbow | 8" X SCH 40 | Carbon Steel | ASTM A234 WPB | 1230.00 | |
45 Deg Elbow | 10" X SCH 40 | Carbon Steel | ASTM A234 WPB | 2500.00 | |
90 Deg Elbow | 2" X SCH 40 | Carbon Steel | ASTM A234 WPB | 195.00 | |
90 Deg Elbow | 3" X SCH 40 | Carbon Steel | ASTM A234 WPB | 260.00 | |
90 Deg Elbow | 4" X SCH 40 | Carbon Steel | ASTM A234 WPB | 400.00 | |
90 Deg Elbow | 6" X SCH 40 | Carbon Steel | ASTM A234 WPB | 950.00 | |
Equal Tee | 3/4" X 40 | Carbon Steel | ASTM A234 WPB | 110.00 | |
Equal Tee | 1/2" X 40 | Carbon Steel | ASTM A234 WPB | 85.00 | |
Equal Tee | 2" X 40 | Carbon Steel | ASTM A234 WPB | 250.00 | |
Concentric Reducer | 3/4 X 1/2" X SCH 160 | Carbon Steel | ASTM A234 WPB | 68.00 | |
Concentric Reducer | 1 X 1/2" X SCH 160 | Carbon Steel | ASTM A234 WPB | 99.99 | |
Concentric Reducer | 4 X 2 X SCH 80" X SCH 160 | Carbon Steel | ASTM A234 WPB | 420.00 |
Please note this is an approx Price of low temperature carbon steel Pipe fittings in India. For final cs pipe fittings price list Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.

Standard Specification Of Schedule 80 Carbon Steel Weld Fittings And Visit Our Carbon Steel Seamless Pipe Fittings Factory In Mumbai, India
ASME B16.9 Carbon Steel Pipe Fittings Specification
Specification: | Carbon Steel Fittings |
Standard | EN, ISO, DIN, JIS, NPT |
Type | Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross, |
Connection Type | Threaded/ Clamp End / End Bell / Weld/ Flange/ |
Pressure-Temperature Class | 150LB, 300LB, 600LB, 1500LB, 2500LB. |
Schedule: | Schedule 5 TO Schedule XXS. |
Size: | Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48” |
Type: | Butt Weld (BW), Seamless (SMLS) Welded |
Thickness: | Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc. |
Type Of Dimension: | BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313 |
Carbon Steel Fittings Dimensions
NPS | O.D. | 90 Degree Elbow | 45 Degree Elbow | 180 Degree Return | ||||
---|---|---|---|---|---|---|---|---|
(inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
(millimeter) | (inch) | Center to Face (inch) |
Center to Face (inch) |
Center to Face (inch) |
Radius (inch) |
Center to Center (inch) |
Back to face (inch) |
|
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
NPS | O.D. | Pipe End Caps | Straight Tee | Straight Cross | Long / Short Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(inch.) | (millimeter) | (inch.) | Length (inch.) |
Center to End (inch.) |
Center to End (inch.) |
Lap Diameter (inch.) |
Long Length (inch.) |
Short Length (inch.) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Schedule 40 Carbon Steel Fittings Dimensions
(Normal Pipe Size) NPS | (Outside Diameter) O.D. | Ave. (Inside Daimeter) I.D. |
Minimum WALL |
Normal Weight Chart |
Maximum W.P. psi |
1/4" | .540 | .344 | .088 | .086 | 780 |
3/8" | .675 | .473 | .091 | .115 | 620 |
1/2" | .840 | .602 | .109 | .170 | 590 |
3/4" | 1.050 | .804 | .113 | .226 | 480 |
1" | 1.315 | 1.029 | .133 | .333 | 450 |
*1-1/4" | 1.660 | 1.360 | .140 | .450 | 370 |
*1-1/2" | 1.900 | 1.590 | .145 | .537 | 330 |
*2" | 2.375 | 2.047 | .154 | .720 | 280 |
2-1/2" | 2.875 | 2.445 | .203 | 1.136 | 300 |
*3" | 3.500 | 3.042 | .216 | 1.488 | 260 |
3-1/2" | 4.000 | 3.521 | .226 | 1.789 | 240 |
*4" | 4.500 | 3.998 | .237 | 2.118 | 220 |
5" | 5.563 | 5.016 | .258 | 2.874 | 190 |
*6" | 6.625 | 6.031 | .280 | 3.733 | 180 |
*8" | 8.625 | 7.942 | .322 | 5.619 | 160 |
*10" | 10.750 | 9.976 | .365 | 7.966 | 140 |
*12" | 12.750 | 11.889 | .406 | 10.534 | 130 |
*14" | 14.000 | 13.073 | .437 | 12.462 | 130 |
*16" | 16.000 | 14.940 | .500 | 16.286 | 130 |
*18" | 18.000 | 16.809 | .562 | 20.587 | 130 |
*20" | 20.000 | 18.743 | .593 | 24.183 | 120 |
*24" | 24.000 | 22.544 | .687 | 33.652 | 120 |
Schedule 80 Carbon Steel Buttweld Fittings
(Normal Pipe Size) NPS | (Outside Diameter) O.D. | Ave. (Inside Diameter) I.D. |
minimum WALL |
Normal Weight |
Maxium W.P. psi |
1/4" | .540 | .282 | .119 | .105 | 1130 |
3/8" | .675 | .403 | .126 | .146 | 920 |
1/2" | .840 | .526 | .147 | .213 | 850 |
3/4" | 1.050 | .722 | .154 | .289 | 690 |
1" | 1.315 | .936 | .179 | .424 | 630 |
1-1/4" | 1.660 | 1.255 | .191 | .586 | 520 |
1-1/2" | 1.900 | 1.476 | .200 | .711 | 470 |
2" | 2.375 | 1.913 | .218 | .984 | 400 |
2-1/2" | 2.875 | 2.290 | .276 | 1.500 | 420 |
3" | 3.500 | 2.864 | .300 | 2.010 | 370 |
3-1/2" | 4.000 | 3.326 | .318 | 2.452 | 350 |
4" | 4.500 | 3.786 | .337 | 2.938 | 320 |
5" | 5.563 | 4.768 | .375 | 4.078 | 290 |
6" | 6.625 | 5.709 | .432 | 5.610 | 280 |
8" | 8.625 | 7.565 | .500 | 8.522 | 250 |
10" | 10.750 | 9.493 | .593 | 12.635 | 230 |
12" | 12.750 | 11.294 | .687 | 17.384 | 230 |
14" | 14.000 | 12.410 | .750 | 20.852 | 220 |
16" | 16.000 | 14.213 | .843 | 26.810 | 220 |
18" | 18.000 | 16.014 | .937 | 33.544 | 220 |
20" | 20.000 | 17.814 | 1.031 | 41.047 | 220 |
24" | 24.000 | 21.418 | 1.218 | 58.233 | 210 |
CS Fittings Weight Chart


Carbon Steel Fittings Pressure Rating
Pressure-Temperature ratings for Carbon Steel Fittings (psig) | |||||
---|---|---|---|---|---|
Temperature Ratings | Pressure Class | ||||
150 | 300 | ||||
1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
Large Diameter Carbon Steel Pipe Fittings Supplier In India And View Tolerance Chart Of High Yield Carbon Steel Fittings.
Tolerance Chart Of Large Diameter Carbon Steel Pipe Fittings
ASME B16.9 Fittings Tolerance | 90 Degree & 45 Degree Elbows & Tees |
Reducers & Lap Joint Stub End |
Pipe Caps | |||
ASME B16.9 Buttweld Fitting (Normal Pipe Size) | O. D. at Bevel |
I. D. at End |
Wall Thick. T | Center-to-End Dimension A ,C ,B |
Over-all Length H |
Over-all Length F |
1/2 to 2-1/2 | +0.06 | Not less than 87.5% of nominal thickness |
+/- 0.06 | +/- 0.06 | +/- 0.12 | |
-0.03 | ||||||
3 to 3-1/2 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
4 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
5 to 8 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.25 | |
10 to 18 | +0.16 | +/- 0.12 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
-0.12 | ||||||
20 to 24 | +0.25 | +/- 0.19 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
-0.19 | ||||||
26 to 30 | +0.25 | +/- 0.19 | +/- 0.12 | +/- 0.19 | +/- 0.38 | |
-0.19 | ||||||
32 to 48 | +0.25 | +/- 0.19 | +/- 0.19 | +/- 0.19 | +/- 0.38 | |
-0.19 |
High Yield Carbon Steel Fittings Gasket Size Chart
NPS | Gasket I.D. |
Gasket O.D. (Outsdie Daimeter) | ||||
---|---|---|---|---|---|---|
Class 150 | Class 300 | Class 400 | Class 600 | Class 900 | ||
1/2 | 0.84 | 1.875 | 2.125 | 2.125 | 2.125 | 2.50 |
3/4 | 1.06 | 2.25 | 2.625 | 2.625 | 2.625 | 2.75 |
1 | 1.31 | 2.625 | 2.875 | 2.875 | 2.875 | 3.125 |
1 1/4 | 1.66 | 3 | 3.25 | 3.25 | 3.25 | 3.50 |
1 1/2 | 1.91 | 3.375 | 3.75 | 3.75 | 3.75 | 3.875 |
2 | 2.38 | 4.125 | 4.375 | 4.375 | 4.375 | 5.625 |
2 1/2 | 2.88 | 4.875 | 5.125 | 5.125 | 5.125 | 6.50 |
3 | 3.50 | 5.375 | 5.875 | 5.875 | 5.875 | 6.625 |
4 | 4.50 | 6.875 | 7.125 | 7.00 | 7.625 | 8.125 |
5 | 5.56 | 7.75 | 8.50 | 8.375 | 9.50 | 9.75 |
6 | 6.62 | 8.75 | 9.875 | 9.75 | 10.50 | 11.375 |
8 | 8.62 | 11 | 12.125 | 12.00 | 12.625 | 14.125 |
10 | 10.75 | 13.375 | 14.25 | 14.125 | 15.75 | 17.125 |
12 | 12.75 | 16.125 | 16.625 | 16.50 | 18.00 | 19.625 |
Check Killed/ Normalized Carbon Steel Pipe Fittings Chemical Composition And Mechanical Properties.
Normalized Carbon Steel Fittings Chemical Composition
Element | Content (%) |
Iron, Fe | Balance |
Chromium, Cr | 18-20 |
Nickel, Ni | 11-15 |
Molybdenum, Mo | 3-4 |
Manganese, Mn | 2 |
Silicon, Si | 1 |
Phosphorous, P | 0.045 |
Carbon, C | 0.03 |
Sulfur, S | 0.03 |
Carbon Steel Buttweld Fittings Mechanical Properties
Properties | Metric | Imperial |
Tensile strength | 595 MPa | 86300 psi |
Yield strength | 260 MPa | 37700 psi |
Modulus of elasticity | 200 GPa | 29000 ksi |
Poisson’s ratio | 0.27-0.30 | 0.27-0.30 |
Elongation at break (in 50 mm) | 55% | 55% |
Hardness, Rockwell B | 85 | 85 |
Carbon Steel Fittings are available in a variety of diameters, wall thicknesses and sizes at market leading prices. Dimension for the large bore carbon steel pipe fittings include ANSI/ASME B16.9, B16.28, MSS-SP-43. Generally the carbon steel bw Fittings are available in either Welded, Seamless or Fabricated type. In fact, these parameters can be modified in order to manufacture customised Carbon Steel Weld Fittings, as required by the buyer or customer.
We Stock And Supply Types Of Carbon Steel Pipe Fittings

Carbon Steel 45 Degree Elbows

Carbon Steel 90 Degree Elbows

Galvanized Carbon Steel End Cap

Steel High Carbon Concentric Reducer

Steel Low Carbon Laterals Tee

Medium Carbon Steel Pipe Reducer

Black Carbon Steel Eccentric Reducer

Fully Killed Carbon Steel 180 Degree Elbows

Galvanised Carbon Steel Equal Tee

Killed Carbon Steel Cross fitting

Low Temp Carbon Steel Stub Ends

Plain Carbon Steel Reducing Tee

Quenching Carbon Steel Cross Tee

High Carbon Steel Lap Joint Stub Ends

Low Carbon Steel Return Bends
Our Materials Are Delivered To The Following Countries:
SCH XS, 26 Inch, ASME B16.9, carbon steel hydraulic Fittings | Europe, UAE, United Kingdom -UK, Malaysia |
26 Inch, SCH 80, killed carbon steel Fittings | Belgium, Philippines, Dammam -KSA, Indonesia. |
12 Inch, SCH 40, BW, Carbon steel pipe Fittings | France, Qatar, Thailand, Europe |
22 Inch, SCH 100, BW, CS Fittings | Germany, Czechia, Malaysia, Thailand |
24 Inch, SCH 120, LTCS, Carbon steel buttweld fittins | Bangladesh, Finland, USA, Malaysia |
8 Inch, SCH 80, ASME B16.9, Carbon steel seamless fittings | Kuwait, Brazil, Saudi Arabia (KSA), South Africa |
10 Inch, SCH 70, ANSI B16.9. Carbon steel welded fittings | Bahrain, South Africa, Singapore |
SCH 50, 5 X 2 Inch ASTM A234, carbon steel flanged fittings | Australia, Philippines, UK, Nigeria |
2 Inch x 1 Inch, BW, SCH 30, Carbon Steel Fittings | Hong Kong, Oman, UAE, Malaysia |
6 x 4 Inch, BW, ASME B16.9, CS Pipe Fittings | Iran, Chile, Singapore, Italy |
DN450 x DN200, 6 Inch, Carbon Steel Tubing Fittings | Norway, Turkey, United Arab Emirates (UAE), Malaysia |
10 Inches, SCH40, LTCS, Carbon Steel Swagelok Fittings | Dubai, Netherlands, Russia, Malaysia |
DN300 * DN200, BW, SCH 20, Carbon Steel Grooved Fittings | Mexico, Egypt, UK, Spain |
6 Inch, BW, SCH XXS, carbon steel swage fittings | Poland, Canada, UK, Ellington -United States |
ASTM A234 WPB, Sch 60, DN120, carbon steel swagelok fittings | Philippines, Canada, Malaysia, Singapore |
6 Inch, Buttweld, SCH 10, low temperature cs fittings | Romania, Europe, Japan, Malaysia |
10 Inch, Sch 120, ASTM WPL6, carbon steel normalized fittings | China, Colombia, Sweden, Malaysia |