Carbon Steel Forged Fittings

ASTM A105 Fitting and ASME SA 105 Forged Elbow manufacturer in India.

Carbon Steel Forged Fittings

Carbon Steel Forged Fittings

Forged Carbon Steel Pipe Fittings

Forged Carbon Steel Pipe Fittings

ASTM A105 Forged Fittings

ASTM A105 Forged Fittings



Buy ASTM A105 Forged Fittings At Lower Prices Compared To USA And UK, check A105 Steel Plug/ Union Pressure Rating.


Carbon Steel Forged Fittings Are Made Out Of A105 Material?

Carbon Steel Forged Fittings are pipe fittings made out of A105 material. These are produced in annealed, normalized, normalized and tempered or quenched and tempered conditions. The A105 Pipe Fittings range from normal bends to sophisticated crosses and elbows. There are different varieties, categories, shapes and form of ASTM A105 Forged Fittings. They could be welded, forged, threaded or socket welded for various purposes and industrial applications. ASTM A105 Threaded Fittings are amongst the most widely used carbon steel pipe fittings.

ASTM A105 Elbow Used Or Forged Fittings?

ASTM A105 Elbow could be used as flanges or forged fittings. The Forged Carbon Steel Pipe Fittings are usually used with smaller pipe sizes. The nominal sizes of these fittings range from ½ inches to 4 inches in most use cases. The A105 Forged Fittings are made stronger due to the forging in production. The A105 Steel Fittings are stronger and corrosion cracking resistant due to the material composition. It contains copper, nickel, molybdenum, vanadium and chromium. This gives excellent ductility and weldable characteristics. Therefore the ASTM A105 Socket Weld Fittings are easily weldable at the same time holding the other fittings or pipes inside the sockets.

Size Ranges Of ASTM A105 Forged Fittings?

The strength of the ASTM A105 Forged Fittings makes them used across a wide range of applications. Usually, the ordinary ASTM A105 Fittings Dimensions cover the smaller pipe ranges up to NPS4. These are low cost and low pressure applications like the domestic piping, domestic gas, water supply, etc. There are different pressure classes and different standards which allow the ASTM A105 Tee to go up to 60 inches in special cases.

Available Pressure Class In SA105N Fittings?

The SA105N Fittings Pressure Rating could range as low as class 150 to as high as class 6000 depending on the standards, compositions and applications. There are high pressure applications like the oil and gas industry, and high temperature applications like the power generation plants which use these fittings in appropriate grading and standards.


ASTM A105 Elbow

ASTM A105 Elbow

ASTM A105 Plug

ASTM A105 Plug

ASTM A105 Union

ASTM A105 Union


Specification Chart Of ASTM A105N Carbon Steel Threaded Fittings And ASTM A105 Socket Weld Fittings Weight Chart According to ASME B16.11.


ASTM A105 Fittings Specification List

Specification : Carbon Steel Forged Fittings And ASTM A105 Fittings
Standards ASME B16.11 (American Standard), Bs3799, MSS SP 79, JIS B2302, MSS-SP-97 (Threadolet), MSS-SP-83 (Union), ASME B36.19 (Nipple)
Types Of Thread NPT, BSPP, BSPT, PF, PT, MPT
Applications Oil and Gas
Chemical
Power station
Water Pipeline
Noncritical Applications
Fire Protection
Advantages Of Simple Usage
Easy installation
Economic as cheaper
Size Threaded Fittings = ½” – 4”
Pressure Rating Threaded Fittings = Class 2000, Class 3000, Class 6000
Type Of Pipe systems 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee, Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple.
Thread Connections ASME B16.11 (Socket Welding and Threaded), MSS-SP-83 (Class Unions), ASME B16.3 (Malleable Iron Fittings), ASME B16.4 ( Gray Iron Fittings), ASME B16.39 (Malleable Iron Unions), ASME B16.34 (Valves — Flanged), ASME B16.39 (Malleable Iron Pipe Unions, 150#, 250#, Or 300#).

ASTM A105 Elbow Price List
Type Of Forged Fittings Size Material Class Price In India (INR)
90 Degree Elbow 1 NPS Carbon Steel ASTM A105 Class 3000 160.65
90 Degree Elbow 1/2 NPS Carbon Steel ASTM A105 Class 3000 78.65
90 Degree Elbow 2 NPS Carbon Steel ASTM A105 Class 6000 260.87
ASTM A105 Tee Price List
Type Of Forged Fittings Size Material Class Price In India (INR)
Threaded Tee 1/2 NPS Carbon Steel ASTM A105 Class 3000 80.98
Threaded Tee 1 NPS Carbon Steel ASTM A105 Class 3000 298.76
Threaded Tee 1-1/2 NPS Carbon Steel ASTM A105 Class 3000 145.98
Threaded Tee 2 NPS Carbon Steel ASTM A105 Class 6000 329.7
ASTM A105 Pipe Plugs Price List
Type Of Forged Fittings Size Material Class Price In India (INR)
Threaded Plugs 1/2 NPS Carbon Steel ASTM A105 Class 3000 $1.50
Threaded Plugs 3/4 NPS Carbon Steel ASTM A105 Class 3000 $1.90
Threaded Plugs 1/4 NPS Carbon Steel ASTM A105 Class 3000 $2.10
Threaded Plugs 1 NPS Carbon Steel ASTM A105 Class 3000 $2.90
ASTM A105 Union Price List
Type Of Forged Fittings Size Material Class Price In India (INR)
Threaded Union 1/2 NPS Carbon Steel ASTM A105 Class 3000 $1.2
Threaded Union 1/3 NPS Carbon Steel ASTM A105 Class 3000 $1.92
Threaded Union 1/4 NPS Carbon Steel ASTM A105 Class 3000 $2.25
Threaded Union 1 NPS Carbon Steel ASTM A105 Class 3000 $3
Threaded Union 2 NPS Carbon Steel ASTM A105 Class 3000 $4.99

Please note this is an approx Price of Carbon Steel Forged Fittings in India. For final ASTM A105 Fittings Price List Please Call on +91 22 66109735 or drop an Email to info@rajtilakmetal.com.


Carbon Steel Forged Fittings


ASTM A105 Elbow/ Coupling/ Plug/ Tee/ Reducer/ Union Dimensions Chart According to ASME B16.11.

ASTM A105 Fittings Dimensions

ASTM A105 Fittings Dimensions

SA105 Elbow Dimensions

SA105 Elbow Dimensions

Normal Pipe Sizes Minimum Length
of Thread
Outside Diameter
of Band
Minimum
Weight
Center to End
B J D G 45°
C
1/2 10.9 13.6 33 3.18 22
3/4 12.7 13.9 38 3.18 25
1 14.7 17.3 46 3.68 28
1.1/4 17 18 56 3.89 33
1.1/2 17.8 18.4 62 4.01 35
2 19 19.2 75 4.27 43
2.1/2 23.6 28.9 92 5.61 52
3 25.9 30.5 109 5.99 64
4 27.7 33 146 6.55 79

SA105 Plug Dimensions

SA105 Plug Dimensions

Dimensions Of ASTM A105 Fittings Plug In Millimeter
NPS (Normal Pipe Sizes) Length
(Min.)
A
     
Square Head Plugs Round Head Plugs Hex & Bushings Plugs
Square Hight
(Min.)
B
Minimum Of Width
Flats
C
Head Nominal
Diameter
E
Minimum Length Of D Nominal Width Of Flats
F
Minimum Hex Height
Bushing
G
Plug
H
1/8” 9.7 6.6 7.1 10.4 35.1 11.2 6.4
1/4” 11.2 6.6 9.7 13.5 41.1 15.7 3.0 6.4
3/8” 12.7 7.9 11.2 17.5 41.1 17.5 4.1 7.9
1/2” 14.2 9.7 14.2 21.3 44.5 22.4 4.8 7.9
3/4” 15.7 11.2 15.7 26.9 44.5 26.9 5.6 9.7
1” 19.1 12.7 20.6 33.3 50.8 35.1 6.4 9.7
1-1/4” 20.6 14.2 23.9 42.9 50.8 44.5 7.1 14.2
1-1/2” 20.6 15.7 28.4 48.5 50.8 50.8 7.9 15.7
2” 22.4 17.5 33.3 60.5 63.5 63.5 8.6 17.5
2-2/2” 26.9 19.1 38.1 73.2 69.9 76.2 9.7 19.1
3” 28.4 20.6 42.9 88.9 69.9 88.9 10.4 20.6
4” 31.8 25.4 53.5 114.3 76.2 117.3 12.7 25.4

ASTM A105 Union Dimensions

ASTM A105 Union Dimensions

Dimensions Of ASTM A105 Union In Millimeter
NPS (Normal Pipe Sizes) Minimum Pipe End Diameter Of Socket Bore Minimum Of Socket Wall Water Way Bore Laying Length Minimum Of Male Flange Minimum Nut Maximum Threads Per 25.4 Minimum Bearing Minimum Depth of Socket Length Assem. Nominal Clear Assem. Nut
  A B C D E F G H J K L N
1/8 21.8 10.92
10.67
3.17 6.83
6.43
22.4
19.0
3.17 3.17 16 1.24 9.6 41.1 49.0
¼ 21.8 14.22
13.97
3.30 9.85
9.45
22.4
19.0
3.17 3.17 19 1.24 9.6 41.4 49.0
3/8 25.9 17.78
17.53
3.48 13.92
13.51
26.9
20.6
3.43 3.43 14 1.37 9.6 46.0 55.0
½ 31.2 21.84
21.59
4.06 17.47
17.07
26.9
20.6
3.68 3.68 14 1.50 9.6 49.0 57.0
¾ 37.1 27.18
26.92
4.27 21.79
21.39
31.8
25.4
4.06 4.06 11 1.68 12.7 56.9 67.0
1 45.5 34.04
33.78
4.95 28.14
27.74
34.3
26.2
4.57 4.44 11 1.85 12.7 62.0 79.0
11/4 54.9 42.67
42.42
5.28 35.76
35.36
40.6
32.5
5.33 5.21 11 2.13 12.7 71.1 94.0
11/2 61.5 48.77
48.51
5.54 41.61
41.20
42.2
34.0
5.84 5.59 10 2.31 12.7 75.5 111.0
2 75.2 61.47
61.21
6.05 52.53
52.12
45.3
37.3
6.60 6.35 10 2.69 15.8 86.1 132.0
21/2 91.7 74.17
73.66
7.65 64.72
64.31
61.7
52.1
7.49 7.11 8 3.07 15.8 102.4 148.0
3 109.2 90.17
89.66
8.31 77.67
77.27
63.8
53.6
8.25 8.00 8 3.53 15.8 109.0 175.0

ASTM A105 Reducer Dimensions

ASTM A105 Reducer Dimensions

Class 3000 LBS Class 6000 LBS Class 9000 LBS
Nominal Pipe Size C D Fitting
Type
A B E Fitting
Type
A B E Fitting
Type
A B E
3/8 x 1/4 0.675 0.555 1 7/16 3/4 15/16 1 7/16 7/8 1
1/2 x 3/8 0.850 0.690 1 7/16 13/16 1 1/16 1 7/16 15/16 1 3/16
1/2 x 1/4 0.850 0.555 1 7/16 13/16 15/16 1 7/16 7/8 1
3/4 x 1/2 1.060 0.855 1 7/16 7/8 1 5/16 1 7/16 1 1/16 1 3/8 1 7/16 1 3/16 1 3/4
3/4 x 3/8 1.060 0.690 2 7/16 5/8 - 1 7/16 7/8 1 3/16
3/4 x 1/4 1.060 0.555 2 3/8 11/16 - 2 3/8 7/8 -
1 x 3/4 1.325 1.065 1 9/16 15/16 1 1/2 1 9/16 1 1/8 1 11/16 1 9/16 1 1/4 2
1 x 1/2 1.325 0.855 2 1/2 5/8 - 1 7/16 1 1/8 1 3/8 1 7/16 1 1/8 1 3/4
1 x 3/8 1.325 0.690 2 7/16 11/16 - 2 1/2 7/8 -
1 x 1/4 1.325 0.555 2 3/8 3/4 - 2 3/8 15/16 -
1 1/4 x 1 1.670 1.330 1 9/16 1 1 7/8 1 9/16 1 3/16 2 1 9/16 1 3/8 2 3/8
1 1/4 x 3/4 1.670 1.065 2 9/16 11/16 - 2 9/16 13/16 - 1 9/16 1 3/16 2
1 1/4 x 1/2 1.670 0.855 2 1/2 3/4 - 2 1/2 7/8 - 2 1/2 7/8 -
1 1/4 x 3/8 1.670 0.690 2 7/16 13/16 - 2 7/16 15/16 -
1 1/4 x 1/4 1.670 0.555 2 3/8 7/8 - 2 3/8 1 -
1 1/2 x 1 1/4 1.910 1.675 1 9/16 1 1/8 2 1/4 1 9/16 1 3/8 2 3/8 1 9/16 1 5/8 2 3/4
1 1/2 x 1 1.910 1.330 2 5/8 11/16 - 1 9/16 1 3/16 2 1 9/16 1 3/8 2 3/8
1 1/2 x 3/4 1.910 1.065 2 9/16 3/4 - 2 9/16 1 - 2 9/16 1 -
1 1/2 x 1/2 1.910 0.855 2 1/2 13/16 - 2 1/2 1 1/16 - 2 9/16 1 -
1 1/2 x 3/8 1.910 0.690 2 7/16 7/8 - 2 7/16 1 1/8 -
2 x 1 1/2 2.385 1.915 1 9/16 1 1/4 2 1/2 1 9/16 1 7/8 2 11/16 1 9/16 2 1/16 3
2 x 1 1/4 2.385 1.675 2 11/16 13/16 - 2 7/8 15/16 - 1 9/16 2 2 3/4
2 x 1 2.385 1.330 2 5/8 7/8 - 2 13/16 1 - 2 13/16 1 -
2 x 3/4 2.385 1.065 2 9/16 15/16 - 2 3/4 1 1/16 - 2 3/4 1 1/16 -
2 x 1/2 2.385 0.855 2 1/2 1 - 2 11/16 1 1/8 - 2 11/16 1 1/8 -

ASTM A105 Coupling Dimensions

ASTM A105 Coupling Dimensions

Normal Pipe Sizes (NPS) End to End (O.D.) Outside
Diameter
Minimum
Length
of Thread
A D B J
1/2 48 28 10.9 13.6
3/4 51 35 12.7 13.9
1 60 44 14.7 17.3
1.1/4 67 57 17 18
1.1/2 79 64 17.8 18.4
2 86 76 19 19.2
2.1/2 92 92 23.6 28.9
3 108 108 25.9 30.5
4 121 140 27.7 33

ASTM A105 Weldolet Dimensions

ASTM A105 Weldolet Dimensions

Outlet
NPS
Face to Crotch (L)
Standard (Schedule 40S) XS (Schedule 80S) Schedule 160
Réduit Egal Réduit Egal Réduit Egal
1/8"
16
-
16
-
-
-
1/4"
16
-
16
-
-
-
3/8"
16
-
19
-
-
-
1/2"
19
19
19
19
28
28
3/4"
22
22
22
22
32
32
1"
27
27
27
27
38
38
1 1/4"
32
32
32
30
44
44
1 1/2"
33
33
33
32
51
51
2"
38
38
38
38
55
55
2 1/2"
41
41
41
41
62
62
3"
44
44
44
44
73
73
3 1/2"
48
51
48
51
-
-
4"
51
51
51
51
84
84
5"
57
57
57
57
94
94
6"
60
60
78
78
105
105
8"
70
70
99
99
-
-
10"
78
78
94
89
-
-
12"
86
86
103
100
-
-
14"
89
89
100
105
-
-
16"
94
94
106
113
-
-
18"
97
103
111
119
-
-
20"
102
117
119
127
-
-
24"
116
137
140
140
-
-

ASTM A105 Tee Dimensions

 ASTM A105 Tee Dimensions

Normal Pipe Sizes Minimum Length of Thread O.D. of Band
D
Center to End
A
Minimum
Weight
B J
1/2 10.9 13.6 33 28 3.18
3/4 12.7 13.9 38 33 3.18
1 14.7 17.3 46 38 3.68
1.1/4 17 18 56 44 3.89
1.1/2 17.8 18.4 62 51 4.01
2 19 19.2 75 60 4.27
2.1/2 23.6 28.9 92 76 5.61
3 25.9 30.5 109 86 5.99
4 27.7 33 146 106 6.55

ASTM A105 Fitting Pressure Rating

ASME B16.11 Pressure-Temperature
Temperature Class
150 300
1/4 - 1 inch. 1 1/4 - 2 inch. 2 1/2 - 3 inch.
(oF) (oC)
-20 to 150 -29 to 66 300 2000 1500 1000
200 93 265 1785 1350 910
250 121 225 1575 1200 825
300 149 185 1360 1050 735
350 177 150 1150 900 650
400 204 - 935 750 560
450 232 - 725 600 475
500 260 - 510 450 385
550 288 - 300 300 300

Forged Carbon Steel Pipe Fittings Weight Chart

Normal Pipe Size A B QTY Weight In KG
¼ 0.81 0.88 160 0.20
0.97 1.00 130 0.26
½ 1.12 1.31 100 0.57
¾ 1.31 1.5 75 0.71
1 1.5 1.81 40 1.08
1 ¼ 1.75 2.19 25 1.68
1 ½ 2.00 2.44 18 2.38
2 2.38 2.97 10 3.55
2 ½ 3.00 3.62 4 6.22
3 3.38 4.31 2 10.36
4 4.19 5.75 1 23.91

Check ASTM A105 Pipe Fittings Thickness Calculation And Tolerance Chart Of Carbon Steel Forged Pipe Fittings.

ASTM A105 Threaded Fittings Tolerance

Carbon Steel Forged Fittings American Standard Dimensional Tolerances
"A" - Threaded Center To BottomFor Size
1/8" And 1/4"
± 0.03"
3/8", 1/2" And 3/4"± 0.06"
1", 1-1/4", 1-1/2" And 2"± 0.08"
2-1/2", 3", And 4"± 0.10"
"B" - Threaded Bore DiameterFor Size
1-1/2" And Smaller
+ 0.020"
- 0.000"
2", 2-1/2", 3" And 4"+ 0.025"
- 0.000"
"C" - Threaded Wall Thick.Min. = 1.09 T (But Not Less Than 5/32")
T = Wall Thickness Of Nominal Pipe Sizes
"D" - Bore Diameter Of Pipe FittingFor Size
2" And Smaller
± 0.030"
2-1/2", 3" And 4"± 0.060"
"E" - Threadeds- Bottom To Bottom - Full CouplingsFor Size
1/8" And 1/4"
± 0.06"
3/8", 1/2" And 3/4"± 0.12"
1", 1-1/4", 1-1/2" And 2"± 0.16"
2-1/2", 3", And 4"± 0.20"
"F" - Bottom Of Threaded To Opposite Face - ANSI B16.11 Half CouplingsFor Size
1/8" And 1/4"
± 0.03"
3/8", 1/2" And 3/4"± 0.06"
1", 1-1/4", 1-1/2" And 2"± 0.08"
2-1/2", 3", And 4"± 0.10"
"G" - Gap Of WeldingApprox. 0.06"
Before Welding Recommended Gap
"H" - Min. FlatMin. Flat = 0.75 X Min.
Threaded Wall Thick.

CS Forged Fittings Mechanical Properties

 Property

Tensile Strength, minimum:

70,000 psi (485 MPa]

Minimum. Yield Point:

36,000 psi [250 MPa]

Reduction of area, minimum:

30% minimum

Hardness, HB, maximum

187


ASTM A105N Fittings Chemical Composition

Element Composition %, Note C
Carbon .35 maximum
Manganese .60-1.05
Phosphorus .035 maximum
Sulfur .040 maximum
Silicon .10-35
Copper .40 maximum, note A
Nickel .40 maximum, note A
Chromium .30 maximum, note A,B
Molybdenum .12 maximum, note A,B
Vanadium .08 maximum, note A

Carbon Steel A105 Forged Fittings Equivalent

CS Forged Fitting Class Carbon Steel Forged Fitting Connection CS Forged Pipe Fitting Equivalent
Schedule Number Wall Designation
Class 2000
Threaded
schedule 80
XS
Class 3000
Threaded
schedule 160
Class 6000
Threaded
XXS
Class 3000
Socket-Weld
schedule 80
XS
Class 6000
Socket-Weld
schedule 160
Class 9000
Socket-Weld
XXS

Held Wide Stock Types Of Carbon Steel Forged Fittings

3/4 Inch, 3000#, ANSI B16.11, ASTM A105 Forged 90 Degree Elbow

3/4 Inch, 3000#, ANSI B16.11, ASTM A105 Forged 90 Degree Elbow

2/4 Inch, 9000#, DN20, A105 Threaded Forged 45 Degree Elbow

2/4 Inch, 9000#, DN20, A105 Threaded Forged 45 Degree Elbow

2 to 14 Inch, 75 LB, Forged Carbon Steel ASTM A105 Socket Weld Tee

2 to 14 Inch, 75 LB, Forged Carbon Steel ASTM A105 Socket Weld Tee

1/2 Inch, Class 3000, Carbon Steel A105 Forged Socket Weld Cross

1/2 Inch, Class 3000, Carbon Steel A105 Forged Socket Weld Cross

1 1/2 Inch, Class 3000, ASME B16.11, Carbon Steel Forged Weld Half Coupling

1 1/2 Inch, Class 3000, ASME B16.11, Carbon Steel Forged Weld Half Coupling

2×2 Inch, 2000 LB, FNPT, ASME B16.11, ASTM A105 Full Coupling

2×2 Inch, 2000 LB, FNPT, ASME B16.11, ASTM A105 Full Coupling

CL3000, DN25, NPT, Carbon Steel A105 Threaded Cap

CL3000, DN25, NPT, Carbon Steel A105 Threaded Cap

 3/4 Inch, 3000 LB, MSS-SP-83, ASTM A105 Threaded Union

3/4 Inch, 3000 LB, MSS-SP-83, ASTM A105 Threaded Union

1/4 Inch, JIC x NPT, 6000 PSI, ASME BS3799 ASTM A105 Threaded Hex Plug

1/4 Inch, JIC x NPT, 6000 PSI, ASME BS3799 ASTM A105 Threaded Hex Plug

2x1-1/2 In, 3000 SCRD, MSS SP-97 ASTM A105 Threaded Bushing

2x1-1/2 In, 3000 SCRD, MSS SP-97 ASTM A105 Threaded Bushing

2 X 1 Inch, ASTM A105, Forged Threaded Street Elbow

2 X 1 Inch, ASTM A105, Forged Threaded Street Elbow

3 X 4 Inch, SCH.STD, NPT, Carbon Steel A105 Threaded Pipe Nipple

3 X 4 Inch, SCH.STD, NPT, Carbon Steel A105 Threaded Pipe Nipple


ASTM A105 Carbon Steel Forged Fittings Suppliers In India Supplied To Different Industries For Various Purposes

CL3000, DN25, SW, ASME B16.11, Carbon Steel Forged Fittings South Africa, Kuwait, Brazil, Saudi Arabia (KSA)
1/2 Inch, 6000 LB, ASTM A105 Forged Fittings Nigeria, Australia, Philippines, UK
1 1/2 X 1 Inch, Class 3000, ANSI B16.11 A105 NPT Fittings, Malaysia, Hong Kong, Oman, UAE
1 x 3/4 Inch, B16.11, CL3000, Carbon Steel ASTM A105 Fittings Singapore, Bahrain, South Africa
1/2 Inch, 3000#, SW, CS A105 Fittings Italy, Iran, Chile, Singapore
3/4 x 4 Inch, schedule80, Forged A105 Weld Fittings Turkey, Norway, Malaysia, United Arab Emirates (UAE)
3/4 X 2 Inch, SCH 40, NPT, ASTM A105N Fittings Dammam -KSA, Belgium, Philippines, Indonesia.
4/6 Inch, B16.11, 3000#, SA-105 Normalized Fittings Canada, Malaysia, Philippines, Singapore
ASME B16.11, NPT, 3/4 Inch, 3000#, High CS Forged Elbow Europe, Romania, Japan, Malaysia
1/3 Inch, Class 6000, B16.11, Galvanized Forged Fittings Colombia, Sweden, China, Malaysia
B16.11, NPT, 2 Inch, 9000LB, Forged Carbon Steel Pipe Fittings Netherlands, Russia, Dubai, Malaysia
1/2 Inch, MSS SP 83, CL2000, SW, ASTM A105N Forged Fittings Egypt, UK, Mexico, Spain
1-1/2 X 1 Inch, SCH XXS, Carbon Steel Socket Weld Fittings Ellington -United States, Poland, Canada, UK
2 Inch, 6 Inch L, SCH 80, B16.11 Carbon Steel Galvanized Fittings United Kingdom -UK, Europe, UAE, Malaysia
2 X 1/2 Inch, ASTM A105, Carbon Steel Equal Tee Thailand, Europe, France, Qatar
DN20, PN400, 1/2 Inch, 3000#, CS A105 Threaded Fittings Czechia, Malaysia, Germany, Thailand
ASME B16.11, NPT, Forged, 3/4 Inch, 3000#, CS A105N Pipe Fittings Finland, USA, Bangladesh, Malaysia


About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy