ASTM A350 LF3 Flanges

Manufacting high-class SA350 Lf3 Blind Flanges And Accept All Small And Large Orders Of LTCS A350 LF3 Slip On Flange In India.

ASTM A350 LF3 Flanges

ASTM A350 LF3 Flanges

SA350 Lf3 Class 1 Flanges

SA350 Lf3 Class 1 Flanges

Carbon Steel A350 Lf3 Flanges

Carbon Steel A350 Lf3 Flanges



What Is A350 Lf3?

At Rajtilak Metal, we manufacture the specified ASTM A350 LF3 Flanges, which takes into consideration several grades of not only carbon steel grades but also low alloy steel forged or ring rolled flanges. As the name suggests, lf3 low temperature flanges cater to the needs of those applications, where the metal has been exposed to low temperature settings. In the case of carbon steel based a350 lf3 slip on flanges, which can be used at a temperature as low as -20 °F, where quite a few metal grades are known to fail. In fact, since the astm a350 lf3 temperature range is low, those industries, where the primary concern is not high tensile strength and corrosion resistance can use these cs a350 lf3 orifice flanges.Apart from being forged this grade of steel carbon astm a350 lf3 blind flanges have to undergo different kinds of heat treatment such as normalizing, tempering, quenching as well as precipitation treatment.

How Many Element Use In ASTM A350 Lf3 Chemical Composition?

The ASTM A350 Lf3 Chemical Composition constitutes of basic carbon as the alloying element followed by the addition of other alloyants such as manganese, molybdenum, phosphorus, sulfur, silicon, nickel, chromium, copper, columbium, vanadium, and nitrogen. Depending on the requirements of the application or the needs of the client, we use astm a350 lf3 material in combination with any of the fore mentioned elements in the manufacture of these flanges.

A350 Lf3 Class 1 Meaning?

We also conduct quality checks besides tests such as impact, hardness, tension and hydrostatic tests on the astm a350 lf3 class 1 flanges. Because we source and use the best quality materials in the manufacture of the carbon steel ltcs lf3 flange, they are characterised by dimensional stability, reliability, which leads to a longer life. According to the specification, the carbon lf3 flanges must confirm to several requirements such as tensile & yield strength and elongation.


ASTM A350 LF3 Flanges


A350 Lf3 Specification

Material Specification Of : ASTM A350 LF3 Flanges
Pressure Rating Class 150 To Class 2500
High Temperature Above 200°C (400°F) For Class 150 Or Above 400°C (750°F)
Low Temperature Above -29 Degree C (−20°F)
Russian-Standard Flanges GOST 12820 / 12821-80, DIN, UNI, EN 1092-1
South African Standard Flanges SANSflanges And SABS flanges
Surface Finish smooth, concentric serrated, stock
Gaskets Types Full Face Gasket
Flat Ring Gasket
Metallic Ring Gakset
Advantages Of Pipe Flange Used to Connect Pipe System
Easy Repair Pipe System
Assembled Without Welding
Common Types Of Flanges: Slip On (SORF), Weld Neck (WNRF), Blind (BLRF), Lap Joint (Loose), Threaded (NPT), Socket-Weld (SWRF)
Special Types Of Flanges : Nipoflange, Elboflange, Latroflange, Swivel Flange, Expanding Flange, Reducing Flange, Weldoflange
Marking Standard Name of Manufacturer
Schedule
Type of Flange Facing
Nominal Pipe Size
Pressure Class
ASME B16 Designation
Standard Cover : pressure ratings & temperature ratings, materials, marking, dimensions, weight, tolerances, testing
Contact Faces RTJ (Ring Type Joint), FF (Flat Face), RF (Raised Face), T/G (Tongue And Groove ), M/F (Male And Female)
Size Chart Normal Pipe Size 1/2 to NPS 24"
Thickness Normal Pipe Size ≤ 18
Bore Diameter Normal Pipe ≤ 10
Flanges Standards EN 1092-1, JIS, ASME B16.5, ASME B16.47 type A, UNI, DIN
Bolt Type high strength bolts
medium strength bolts
low strength bolts
European Standard Flanges JIS B2220 Flanges (5k to 30k) and KS1503 flanges

Buy Low Temperature Carbon Steel A350 LF3 Flanges Available In A Wide Range Of Type/ Shape, A350 LF3 Chemical Composition.


A350 Lf3 Chemical Composition

Element Composition
Carbon, maximum 0.20 maximum
Manganese 0.90 maximum
Phosphorus, maximum 0.035 maximum
Sulfur, maximum 0.040 maximum
Silicon [Note A] 0.20–0.35
Nickel 3.3–3.7
Chromium 0.30 maximum [Note C]
Molybdenum 0.12 maximum [Note C]
Copper 0.40 maximum
Columbium 0.02 maximum
Vanadium 0.03 maximum

SA350 LF3 Blind Flange Stud Bolt Size Chart And ASTM A350 Lf3 Mechanical Properties/ Temperature Range.


ASTM A350 LF3 Mechanical Properties

Tensile Strength, minimum:

70,000 psi (485 MPa]

Minimum. Yield Point:

36,000 psi [250 MPa]

Reduction of area, minimum:

30% minimum

Hardness, HB, maximum

187


Astm A350 Lf3 Flanges Tensile Properties

  LF1 and LF5 CL 1 LF2 CL 1 and 2 LF3 CL 1 and LF 5 CL 2 LF 6 LF 9 LF 787
        CL 1 CL   CL 2 CL 3
Tensile strength, ksi [MPa] 60-85 [415- 585] 70-95 [485- 655] 70-95 [485- 655] 66-91 [455-630] 75-100 [515-690] 63-88 [435- 605] 65-85 [450-585] 75-95 [515-655]
Yield strength, minimum, ksi [MPa]B,C Elongation: 30 [205] 36 [250] 37.5 [260] 52 [360] 60 [415] 46 [315] 55 [380] 65 [450]
Standard round specimen, or small proportional specimen, minimum % in 25 22 22 22 20 25 20 20
4D gage length Strip specimen to wall thickness 5⁄16 in. (7.94 mm) and over and for all small sizes tested in full section; minimum % in 2 in. (50 mm) 28 30 30 30 28 28 28 28
Equation for calculating minimum elongation for strip specimens thinner than 5⁄16 in. (7.94 mm); minimum % in 2 in. (50 mm) t p actual thickness in inches 48t+13 48t+15 48t+15 48t+15 48t+13 48t+13 48t+13 48t+13
Reduction of area, minimum, % 38 30 35 40 40 38 45 45

ASTM A350 Lf3 Class 1 Thermal Expansion

Properties Of Metric Of Imperial Of
Thermal expansion co-efficient (@0-100°C/32-212°F) 10.4 µm/m°C 5.78 µin/in°F
Thermal conductivity 21.6 W/mK 150 BTU in/hr.ft².°F

A350 LF3 Pressure Rating Chart

TEMP
°C
Class 150 Class 300 Class 400 Class 600 Class 900 Class 1500 Class 2500
-29 TO 38 19.6 51.1 68.1 102.1 153.2 255.3 425.5
50 19.2 50.1 66.8 100.2 150.4 250.6 417.7
100 17.7 46.6 62.1 93.2 139.8 233 388.3
150 15.8 45.1 60.1 90.2 135.2 225.4 375.6
200 13.8 43.8 58.4 87.6 131.4 219 365
250 12.1 41.9 55.9 83.9 125.8 209.7 349.5
300 10.2 39.8 53.1 79.6 119.5 199.1 331.8
325 9.3 38.7 51.6 77.4 116.1 193.6 322.6
350 8.4 37.6 50.1 75.1 112.7 187.8 313
375 7.4 36.4 48.5 72.7 109.1 181.8 303.1
400 6.5 34.7 46.3 69.4 104.2 173.6 289.3
425 5.5 28.8 38.4 57.5 86.3 143.8 239.7
450 4.6 23 30.7 46 69 115 191.7
475 3.7 17.4 23.2 34.9 52.3 87.2 145.3
500 2.8 11.8 15.7 23.5 35.3 58.8 97.9
538 1.4 5.9 7.9 11.8 17.7 29.5 49.2
TEMP
°C
150 300 400 600 900 1500 2500

Manufacturer Of Carbon Steel A350 LF3 Weld Neck Flange In India And View ASTM A350 Lf3 Class 1 Dimensions/ Weight Chart.

Dimension Table Of A350 Lf3 Flanges

Dimension Table Of A350 Lf3 Flanges


NPS O.D. of Flange Flanges Thickness Diameter of RF Diameter of Hub at Base Lengtd Tdru Hub Bore or Diameter Dia. of Hub at Bevel Radius of Fillet Deptd of Socket
Welding (WN) Neck Slip-On (SORF) Threaded (NPT) Socket (SWRF) Lap Joint (Loose) Slip-on (SORF) Socket (SWRF) Lap Joint (Loose)
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2

SA350 LF3 Weight Chart According to ASME B16.5

Nominal Pipe Sizes (NPS) Slip On (SORF) Threaded (NPT) Socket Weld (SWRF) Lap Joint (Loose) Blind (BLRF) Weld Neck (WRNR)
½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
3 3 3 3 4 4
2 5 5 5 5 5 6
8 8 8 8 7 10
3 9 9 9 9 9 11.5
11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268

Refer A350 Lf3 Flanges Gasket Material And A350 Gr LF3 Thickness Calculation For Pressure Vessel.

Carbon Steel LF3 Flanges Thickness Chart

ASTM A350 LF3 Flanges Wall Thickness
NPS (Normal Pipe Sizes) Outside Daimeter (O.D.) Schedule 10 Schedule 20 Schedule 30 STD Wall Schedule 40 Schedule 60 EXT Hvy Schedule 80 Schedule 100 Schedule 120 Schedule 140 Schedule 160 XX Hvy
½ 0.84 0.083 ... ... 0.109 0.109 ... 0.147 0.147 ... ... ... 0.188 0.294
¾ 1.05 0.083 ... ... 0.113 0.113 ... 0.154 0.154 ... ... ... 0.219 0.308
1 1.315 0.109 ... ... 0.133 0.133 ... 0.179 0.179 ... ... ... 0.25 0.358
1 ¼ 1.66 0.109 ... ... 0.14 0.14 ... 0.191 0.191 ... ... ... 0.25 0.382
1 ½ 1.9 0.109 ... ... 0.145 0.145 ... 0.2 0.2 ... ... ... 0.281 0.4
2 2.375 0.109 ... ... 0.154 0.154 ... 0.218 0.218 ... ... ... 0.344 0.436
2 ½ 2.875 0.12 ... ... 0.203 0.203 ... 0.276 0.276 ... ... ... 0.375 0.552
3 3.5 0.12 ... ... 0.216 0.216 ... 0.3 0.3 ... ... ... 0.438 0.6
3 ½ 4 0.12 ... ... 0.226 0.226 ... 0.318 0.318 ... ... ... ... 0.636
4 4.5 0.12 ... ... 0.237 0.237 ... 0.337 0.337 ... 0.438 ... 0.531 0.674
5 5.563 0.134 ... ... 0.258 0.258 ... 0.375 0.375 ... 0.5 ... 0.625 0.75
6 6.625 0.134 ... ... 0.28 0.28 ... 0.432 0.432 ... 0.562 ... 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 ...
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 ...
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 ...
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 ...
22 22 0.25 ... ... 0.375 ... ... 0.5 ... ... .... .... .... ....
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 ....
26 26 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
30 30 0.312 0.5 0.625 0.375 .... .... 0.5 .... .... .... .... .... ....
36 36 0.312 0.5 0.625 0.375 0.75 .... 0.5 .... .... .... .... .... ....
40 40 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
42 42 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..
48 48 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..

LTCS LF3 Flanges Bolts And Nuts

Class 150 Flanges Class 300 Flanges Class 600 Flanges
NPS # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length
1/16 RF RTJ 1/16 RF RTJ 1/4 RF RTJ
1/2 4 0.50 2-1/4 4 0.50 2-1/2 3 4 0.50 3 3
3/4 4 0.50 2-1/2 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1 4 0.50 2-1/2 3 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1-1/4 4 0.50 2-3/4 3-1/4 4 0.63 3-1/4 3-3/4 4 0.63 3-3/4 3-3/4
1-1/2 4 0.50 2-3/4 3-1/4 4 0.75 3-1/2 4 4 0.75 4-1/4 4-1/4
2 4 0.63 3-1/4 3-3/4 8 0.63 3-1/2 4 8 0.63 4-1/4 4-1/4
2-1/2 4 0.63 3-1/2 4 8 0.75 4 4-1/2 8 0.75 4-3/4 4-3/4
3 4 0.63 3-1/2 4 8 0.75 4-1/4 4-3/4 8 0.75 5 5
3-1/2 8 0.63 3-1/2 4 8 0.75 4-1/4 5 8 0.88 5-1/2 5-1/2
4 8 0.63 3-1/2 4 8 0.75 4-1/2 5 8 0.88 5-3/4 5-3/4
5 8 0.75 3-3/4 4-1/4 8 0.75 4-3/4 5-1/4 8 1.00 6-1/2 6-1/2
6 8 0.75 4 4-1/2 12 0.75 4-3/4 5-1/2 12 1.00 6-3/4 6-3/4
8 8 0.75 4-1/4 4-3/4 12 0.88 5-1/2 6 12 1.13 7-1/2 7-3/4
10 12 0.88 4-1/2 5 16 1.00 6-1/4 6-3/4 16 1.25 8-1/2 8-1/2
12 12 0.88 4-3/4 5-1/4 16 1.13 6-3/4 7-1/4 20 1.25 8-3/4 8-3/4
14 12 1.00 5-1/4 5-3/4 20 1.13 7 7-1/2 20 1.38 9-1/4 9-1/4
16 16 1.00 5-1/4 5-3/4 20 1.25 7-1/2 8 20 1.50 10 10
18 16 1.13 5-3/4 6-1/4 24 1.25 7-3/4 8-1/4 20 1.63 10-3/4 10-3/4
20 20 1.13 6-1/4 6-3/4 24 1.25 8 8-3/4 24 1.63 11-1/4 11-1/2
24 20 1.25 6-3/4 7-1/4 24 1.50 9 10 24 1.88 13 13-1/4

ASTM A350 Lf2 Class 1 And Class 2 Tolerance Formula

ASME B16.5Tolerance
A Outside Diameter (O.D.)
  • When Outside Diameter (O.D.) is 24" or less: ±1/16" (1.6 mm)
  • When Outside Diameter (O.D.) is over 24": ±1/8" (3.2 mm)
D Inside Diameter
  • 10" and smaller: ±1/32" (0.8 millimeter)
  • 12" thru 18": +1/8" (3.2 millimeter)
  • 20" and larger: -1/16" (1.6 millimeter)
B Diameter of contact face
  • 1/16" raised face: ±1/32" (0.8 millimeter)
  • 1/4" Raised Face (RF), Tongue & Groove (T/G), (male & female), (m/f): ±1/64" (0.4 mm)
J Diameter of hub at base
  • When hub base is 24" or smaller: ±1/16" (1.6 millimeter)
  • When hub base is over 24": ±1/8" (3.2 millimeter)
H Diameter of hub at point of welding
  • 5" and smaller: +3/32" (2.4 millimeter), -1/32" (0.8 millimeter)
  • 6" and larger: +5/32" (4.0 millimeter), -1/32 (0.8 millimeter)
P Drilling
  • Bolt circle: ±1/16" (1.6 millimeter)
  • Bolt hole spacing: ±1/32" (0.8 millimeter)
  Eccentricity of bolt circle with respect to facing
  • 2 1/2" and smaller ±1/32" (0.8 millimeter) max.
  • 3" and larger ±1/16" (1.6 millimeter) max.
C Thickness
  • 18" and smaller: ±1/8" (3.2 millimeter), -0"
  • 20" and larger: ±3/16" (4.8 millimeter), -0"
K Length of hub
  • 10" and smaller: ±1/16" (1.6 millimeter)
  • 12" and larger: ±1/8" (3.2 millimeter)

Check Availability Types Of ASTM A350 LF3 Flanges

28 Inch, Class 150, RF, ASME B16.47, ASTM A350 Lf3 Class 2 Threaded Flanges

28 Inch, Class 150, RF, ASME B16.47, ASTM A350 Lf3 Class 2 Threaded Flanges

10 Inch, Class 300, SCH STD, A350 Lf3 Killed Carbon Steel Lap Joint Flanges

10 Inch, Class 300, SCH STD, A350 Lf3 Killed Carbon Steel Lap Joint Flanges

12 Inch, Black Coating, 300LB, SA350 Gr Lf3 Cl1 Long Weld Neck Flanges

12 Inch, Black Coating, 300LB, SA350 Gr Lf3 Cl1 Long Weld Neck Flanges

2 Inch, 150LB, SCH 80, RF, A350 Gr Lf3 Class 1 Spectacle Blind Flanges

2 Inch, 150LB, SCH 80, RF, A350 Gr Lf3 Class 1 Spectacle Blind Flanges

6 Inch, 150 LB, ASME B16.5, ASTM A350 Lf3 Class 2 Plate Flanges

6 Inch, 150 LB, ASME B16.5, ASTM A350 Lf3 Class 2 Plate Flanges

8 Inch, SCH 80, LTCS ASTM A350 Lf3 Ring Type Joint Flanges

8 Inch, SCH 80, LTCS ASTM A350 Lf3 Ring Type Joint Flanges

EN1092-1, PN16, DN200, A350 Gr Lf3 Carbon Steel Tongue & Groove Flanges

EN1092-1, PN16, DN200, A350 Gr Lf3 Carbon Steel Tongue & Groove Flanges

6 Inch, Class 120, EN1092-1 Type 01, A350 Lf3 Grade Low Temperature Reducing Flanges

6 Inch, Class 120, EN1092-1 Type 01, A350 Lf3 Grade Low Temperature Reducing Flanges

2 Inch, SCH 40, Class 150, RF, ASTM A350 Lf3 Class 1 And Class 2 Forged Flanges

2 Inch, SCH 40, Class 150, RF, ASTM A350 Lf3 Class 1 And Class 2 Forged Flanges

1 Inch, SCH 40, Class 300, RF Ends, ASTM A350 Lf3 Raised Face Flanges

1 Inch, SCH 40, Class 300, RF Ends, ASTM A350 Lf3 Raised Face Flanges

2 1/2 Inch, 150#, FF, ASTM A350 Lf3 Class 2 Male and Female Flange

2 1/2 Inch, 150#, FF, ASTM A350 Lf3 Class 2 Male and Female Flange

16 Inch, Class 900, ASME B16.5 LTCS Lf3 Bleed Ring

16 Inch, Class 900, ASME B16.5 LTCS Lf3 Bleed Ring

8 Inch, 600# RF, ASME B16.5, LTCS ASTM A350 Lf3 Slip On Flanges

8 Inch, 600# RF, ASME B16.5, LTCS ASTM A350 Lf3 Slip On Flanges

4 Inch, 150 LB, Raised Face End, CS A350 Lf3 Socket Weld Flanges

4 Inch, 150 LB, Raised Face End, CS A350 Lf3 Socket Weld Flanges

12 Inch, Class 300, Carbon Steel A350 LF3 Blind Flanges

12 Inch, Class 300, Carbon Steel A350 LF3 Blind Flanges

10 Inch, Class 600, ANSI B16.5, RF, A350 LF3 Weld Neck Flanges

10 Inch, Class 600, ANSI B16.5, RF, A350 LF3 Weld Neck Flanges


Some Of The Major Locations We Have Supplied ASTM A350 LF3 Flanges:

Low-Temperature Carbon Steel LF3 Flanges Germany, Czechia, Malaysia, Thailand
ASTM A350 LF3 Blind Flanges Finland, Malaysia, USA, Bangladesh
ASTM A350 LF3 Weld Neck Flanges Italy, Iran, Chile, Singapore
SA 350 Grade LF3 CL1 Flanges Egypt, Spain, UK, Mexico
A350 Lf3 Cl1 Flanges Canada, Singapore, Malaysia, Philippines
Sa350 Gr Lf3 Forged Flange Japan, Europe, Romania, Malaysia
LTCS A350 LF3 Flanges Colombia, Malaysia, Sweden, China
ASME SA 350 GR LF3 Weld Weld Flange Dubai, Netherlands, Russia, Malaysia
ASTM A350 LF3 (ASME SA350) Flanges South Africa, Saudi Arabia (KSA), Kuwait, Brazil
ASTM A350 LF3 Carbon Steel Flanges Philippines, Nigeria, Australia, UK
LTCS SA350 GR LF3 CL1 / CL2 Flanges Oman, Malaysia, Hong Kong, UAE
A350 LF3 Class 1 and Class 2 Flange South Africa, Bahrain, Singapore
ASTM A350 Class 2 Threaded Flanges Ellington -United States, Poland, Canada, UK
A350 LF3 Carbon Steel Flanges United Kingdom -UK, Europe, UAE, Malaysia
Carbon Steel A350 Lf3 Flanges United Arab Emirates (UAE), Norway, Malaysia, Turkey
ASTM A350 Lf3 Flanges Dammam -KSA, Indonesia, Belgium, Philippines.
ASTM A350 LF3 Pipe Flanges France, Thailand, Europe, Qatar


About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy