ASTM A350 LF2 Flanges
A350 lf2 class 1/ 2 Blind Flange suppliers, A350 Lf2 Class 1 Welding Neck Flange manufacturer in India.
Manufacturer of lf2 Yield Strength, CS A350 Lf2 Forgings Price in India, Carbon Steel A350 Lf2 Material stockist in Mumbai, India.
LF2 Flanges are made up of general carbon steel. The material can be supplied as normalized, normalized quenched or normalized tempered conditions. A350 LF2 Flanges vary in shape and sizes, and their dimensions differ. SA350 LF2 Flanges can be categorized into two main standards according to the bore diameter. The B16.5 standard which covers the range of ½ inch to 24 inches and the B16.47 standard which covers the range of 26 inches up to 60 inches are the two main standards. ASTM A350 LF2 Flanges can be open or closed.
ASTM A350 LF2 Flanges
A350 LF2 Class 1 Flanges
LF2 Yield Strength
Table of contents
- What is ASTM A350 Lf2 Material?
- A350 LF2 Price List In India
- A350 Grade Lf2 Specifications
- Types Of ASTM A350 LF2 Flanges
- LTCS ASTM A350 Lf2 Slip On Flanges
- CS A350 Lf2 Socket Weld Flanges
- Carbon Steel A350 LF2 Blind Flanges
- A350 LF2 Weld Neck Flanges
- ASTM A350 Lf2 Class 2 Threaded Flanges
- A350 Lf2 Killed Carbon Steel Lap Joint Flanges
- SA350 Gr Lf2 Cl1 Long Weld Neck Flanges
- A350 Gr Lf2 Class 1 Spectacle Blind Flanges
- ASTM A350 Lf2 Class 2 Plate Flanges
- LTCS ASTM A350 Lf2 Ring Type Joint Flanges
- A350 Gr Lf2 Carbon Steel Tongue & Groove Flanges
- A350 Lf2 Grade Low Temperature Reducing Flanges
- ASTM A350 Lf2 Class 1 And Class 2 Forged Flanges
- ASTM A350 Lf2 Raised Face Flanges
- ASTM A350 Lf2 Class 2 Male and Female Flange
- ASME B16.5 LTCS Bleed Ring
Check A350-Lf2-1 Forged Flanges Price List, Sa350 Lf2 Steel Threaded Flanges exporter in India, A350 Lf2 Cl1 Flanges manufacturers in Rajkot, Gujarat, SA350 Gr Lf2 Paddle Blank Flanges supplier.
Depending on their use case they can have raised faces or flat faces. Special cases like the Wn Flange LF2 have welded necks attached for extra grip and welding surface onto the piping. There are ring type joint flanges which are used with grooves in them so that a gasket can fit in between and make the connection tighter.
What is ASTM A350 Lf2 Material?
Carbon Steel A350 LF2 Flanges are affordable and could be worked under cold condition but their corrosion resistance is not as good as the alloy flanges. A350 LF2 Blind Flange is a type of A350 LF2 class which is used to seal the open end of a pipe rather than connecting two pipes together. The A350 LF2 Welding Neck Flange is important in connections where higher bending stress is expected. The extra length and surface provided by the welded neck holds the connection under bending stress and without breaking. Ltcs A350 LF2 Blind Flange is a low temperature carbon steel forged flange. It usually comes with a flat plate at one end with bolting holes to connect it to the pipe. Ltcs Astm A350 LF2 Flanges available in different dimensions and shapes from [company name]. A350 LF2 Steel Flanges can be used in applications which require moderate strength. The A350 LF2 Carbon Steel Blind Flanges could be used to seal open endings in a moderate impact toughness requirement but with less corrosion risks.
A350 LF2 Price List In India
| SR NO | QTY | Description | PRICE (USD$) PER PICE |
| 1 | 20 | Slip on CS ASTM A350 Flange 10" 150 RF | $33.76 |
| 2 | 150 | Threaded CS ASTM A350 Flange 2" RF | $3.77 |
| 3 | 50 | Blind CS ASTM A350 Flange 2" RF | $2.92 |
| 4 | 100 | Blind CS ASTM A350 Flange 4" Class 150 RF | $8.26 |
| 5 | 40 | Blind CS ASTM A350 Flange 4" 600 RF | $28.65 |
| 6 | 36 | Blind CS ASTM A350 Flange 8" Class 300 RF | $44.70 |
| 7 | 30 | Slip on CS ASTM A350 Flange 3" 300 RF | $12.85 |
| 8 | 120 | Slip on CS ASTM A350 Flange 4" 150 RF | $10.33 |
| 9 | 100 | Threaded CS ASTM A350 Flange 2" 600 RF | $12.73 |
| 10 | 300 | Threaded CS ASTM A350 Flange 3" 150 RF | $8.45 |
| 11 | 45 | Weld neck CS ASTM A350 Flange 2" 150 XH RF | $5.40 |
| 12 | 32 | Weld neck CS ASTM A350 Flange 2" 300 XH RF | $10.20 |
| 13 | 80 | Weld neck Carbon Steel ASTM A350 Flange 2" 600 XH RF | $10.56 |
| 14 | 60 | Weld neck CS ASTM A350 Flange 4" 600 Sch 160 RF | $44.90 |
Please note this is an approx Price of ASTM A350 LF2 flanges in India. For final Sa350-Lf2-Cl1 Material Price List Please Call on 91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.
A350 Grade Lf2 Specifications
Specialized Manufacturer of A350 Lf2 Class 1 Material in India
| A350 Lf2 Material: | ASTM A350 LF2 Class 1/ A350 LF2 Class 2 |
|---|---|
| ASTM A350 Lf2 Flanges Size Range: | 1/2″ (15 NB) to 48″ (1200NB), ASME B16.47 Flanges size range: 26″ to 60″ |
| A350 Gr Lf2 Class 1 Typical manufacturing specifications: | A350 LF2 , ASME A350 LF2 |
| Sa350 Lf2 Class 1 Origin: | European Origin, Indian Origin, US Origin, Korean Origin, Sweden Origin, Ukraine Origin, Japanese Origin Materials |
| ASTM A350 Lf2 Class 2 Manufacturing Dimensions: | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| A350 Lf2 Class 1 Material Standard: | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
| A350 Lf2 Cl1 Flanges / Pressure: | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Flange Face Type: | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ), LJ, FM , R.T.J , R.J and so on |
| ANSI ClaLTCS A350 LF2 Flanges: | 150 to 2500 Size: 1/2"-24" |
| AWWA ClaLTCS A350 LF2 Flanges: | classes B, D, E, F Size: 3"-144" |
| LTCS ASTM A350 Lf2 Flanges pressure classes: | 150, 300, 400, 600, 900, 1500 and 2500 for ASME B16.5 |
| CS A350 Lf2 Flange pressure classes: | 75, 150, 300, 400, 600, 900 for ASME B16.47 |
| A350 Lf2 Grade Pipe Flanges Specialized in: | ASTM A105/105N SORF, A350 Lf2 Forgings SOFF, A350 Gr Lf2 BLRF, A350 Gr Lf2 Cl1 BLFF, A350 Gr Lf2 Class 1 WNRF, Sa350 Lf2 WNFF, Sa350 Lf2 Class 1 SWRF, Sa350 Lf2 Cl2 SWFF, Sa350 Lf2 Steel Threaded RF, A350-Lf2-1 Threaded FF & LJ |
| Sa350-Lf2-Cl1 Material Types of flanges in India: | ASTM A350 LF2 LTCS Raised Face (RF) Flanges, ASTM A350 Lf2 Cl.1 Orifice Flanges, ASTM A350 Lf2 Class 2 Large Diameter Flanges, ASTM A350 LF2 LTCS Custom Flanges, A350 Lf2 Class 1 Slip-on Flanges (SORF), A350 Lf2 Material Weld neck Flanges (WNRF), ASTM A350 Lf2 Cl1 Blind Flanges (BLRF), ASTM A350 Lf2 Flanges Lap Joint Flanges (SOLJ), ASTM A350 Lf2 Forgings Socket-weld Flanges (SWRF), ASTM A350 Lf2 Grade Screwed (Threaded) Flanges, ASTM A350 LF2 LTCS Drawing Flanges, ASTM A350 LF2 LTCS Forged Flanges, ASTM A350 LF2 LTCS Plate Flanges, ASTM A350 LF2 LTCS Flat Face Flanges, ANSI ASTM A350 LF2 LTCS Flanges, ASME ASTM A350 LF2 LTCS Flanges, ASTM A350 LF2 LTCS BS Flanges, ASTM A350 Gr Lf2 Long weld neck Flanges (LWNRF), ASTM A350 Gr Lf2 Cl1 Spectacle Blind Flanges Spacer & Blind Flanges, ASTM A350 Gr Lf2 Class 1 Ring Type Joint Flanges (RTJ), ASTM A350-Lf2-1 Reducing Flanges, ASTM A350 LF2 LTCS DIN Flanges, API, EN Flanges etc. |
| Top 10 Manufacturer of A350 Lf2 Killed Carbon Steel High Hub Flanges: | Raccortubi S.p.A. Flanges, Italy, Erne Fittings Flanges, Austria, Melesi Flanges, Italy, Mega Flanges, Italy, Ulma Flanges, Spain, TecnoForge Flanges, Italy, BENKAN Corporation Flanges, Japan, BKL- Thai Benkan Flanges, Thailand, Lame S.r.l. Flanges, Italy, Metal far Flanges, Italy, Rajtilak Metal, India |
| Carbon Steel A350 LF2 Flanges Delivery: | 15-20 days |
Prestige quality A350 lf2 class 1 manufacturers in India offer these ASTM A350 LF2 flanges/ 2 Blind Flange in EN, DIN, ISO, BS, JIS or ANSI standard.
| Trade Name |
Grade 1 Low Temp
|
Grade 6 Low Temp
|
| Forged Flanges |
A/SA350 Grade LF2
|
A/SA350 Grade LF2
|
Types of ASTM A350 LF2 Flanges
LTCS ASTM A350 Lf2 Slip On Flanges
CS A350 Lf2 Socket Weld Flanges
Carbon Steel A350 LF2 Blind Flanges
A350 LF2 Weld Neck Flanges
ASTM A350 Lf2 Class 2 Threaded Flanges
A350 Lf2 Killed Carbon Steel Lap Joint Flanges
SA350 Gr Lf2 Cl1 Long Weld Neck Flanges
A350 Gr Lf2 Class 1 Spectacle Blind Flanges
ASTM A350 Lf2 Class 2 Plate Flanges
LTCS ASTM A350 Lf2 Ring Type Joint Flanges
A350 Gr Lf2 Carbon Steel Tongue & Groove Flanges
A350 Lf2 Grade Low Temperature Reducing Flanges
ASTM A350 Lf2 Class 1 And Class 2 Forged Flanges
ASTM A350 Lf2 Raised Face Flanges
ASTM A350 Lf2 Class 2 Male and Female Flange
ASME B16.5 LTCS Bleed Ring
Rajtilak Metal is an ISO certified Carbon Steel A350 Lf2 Material manufacturers & ASTM A350 LF2 flanges distributor in India
LTCS ASTM A350 LF2 Flanges
Forged and Plate Flanges
| Products | Size | |
| Carbon Steel ASTM A350 LF2 LTCS Slip-On Flanges | LTCS A350 LF2- Threaded Flanges | Sizes 1/2″ – 48″ Raised Face or Flat Face |
| ASTM A350 LF2 LTCS Orifice Flanges | Low Temperature Carbon Steel Forged Flanges | |
| A350 LF2 LTCS Ring Type Joint Flanges | Carbon Steel A350 LF2 Square Flanges | |
| LTCS ASTM A350 LF2 Weld Neck Flanges | cs astm a350 gr lf2 Socket Weld Flanges | |
| sa350 lf2 class 1 Blind Flanges | A350 Gr Lf2 Cl1 Reducing Flanges | |
| A350 Gr Lf2 Class 1 Lap Joint Flanges | Sa350 Lf2 Plate Flanges | |
Rajtilak Metal is a ASTM A350 LF2 flanges And A350 LF2 Carbon Steel Blind Flanges manufacturers and supplier of offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.
| A350 LF2 ½" Flanges | ASTM A350 Lf2 Class 2 DN15 |
| LTCS LF2 2½" Flanges | DN65/ A350 Gr Lf2 Cl1 Weld Neck Flanges |
| Carbon Steel A350 LF2 14" Flanges | DN350/ ASTM A350 Flanges |
| LTCS ASTM A350 15" Flanges | DN375/ ASTM A350 LF2 Flanges |
| LTCS 16" Flanges | DN400/ ASTM A350 LF2 Blind Flange |
| astm a350 grade lf2 4" Flanges | DN100/ ASTM A350-1 Forged Flanges |
| astm a350 gr 5" Flanges | DN125/ ASTM A350 Cl.1Plate Flanges |
| cs astm a350 gr lf2 3" Flanges | DN80/ ASTM A350 Gr Class 1 Slip On Flanges |
| LTCS ASTM A350 LF2 2" Flanges | DN50/ ASTM A350 Gr Lf2 Carbon Steel |
| Carbon Steel LF2 6" Flanges | DN150/ ASTM A350 Lf2 Class 1 Material |
| SA350 LF2 8" Flanges | DN200/ ASTM A350 Class 2 Orifice Flanges |
| Sa350 Lf2 10" Flanges | DN250/ ASTM A350 Gr Lf2 Cl1 Flat Flanges |
| ASTM A350 LF2 LTCS ¾" Flanges | DN20/ A350 Lf2 Flanges |
| Carbon Steel ASTM A350 LF2 1" Flanges | DN25/ LTCS ASTM A350 Lf2 Flanges |
| LTCS A350 LF2 1¼" Flanges | DN32/ CS A350 Lf2 Flange |
| Carbon Steel A350 LF2 1½" Flanges | DN40 ASTM A350 Lf2 Grade Pipe Flanges |
| LTCS A350 LF2 12" Flanges | DN300/ ASTM A350 Gr Lf2 Loose Flanges |
| cs astm a350 gr lf2 18" Flanges | DN450/ ASTM A350 Welding Neck Flange |
| astm a350 grade 20" Flanges | DN500/ Ltcs Astm A350 LF2 Flanges |
| Carbon Steel 24" Flanges | DN600/ ASTM A350 Steel Flanges |
A350 Lf2 Chemical Composition And ASTM A350 Lf2 Mechanical Properties
Check a350 lf2 mechanical properties & a350 lf2 cl 1 chemical composition
| CHEMICAL PROPERTIES | MECHANICAL PROPERTIES | |
|---|---|---|
| C 0.30 Max | TS Min psi (Mpa) | 70,000 (485) |
| Mn 0.60 – 1.35 | YS Min psi (Mpa) | 36,000 (250) |
| Si 0.15 – 0.30 | EL (2″ Min) | 22% |
| P 0.035 Max | RA Min | 30% |
| S 0.040 Max | Hardness, Bhn | Max 197 |
| Cr 0.30 Max | -50ºF Charpy | Min Impact |
| Ni 0.40 Max | Energy F t/Lb (J):- | |
| Mo 0.12 Max | Set of 3 Specimen* | 15 (20) |
| V 0.08 Max | For One Specimen | 12 (16) |
| Cb 0.02 Max | ||
| Cu 0.04 Max | ||
| Pb 0.02 Max | ||
| Total Residuals = 0.50 | ||
A350 Lf2 Yield Strength Physical Properties
| KEY PHYSICAL PROPERTIES | CAST CARBON STEEL |
FORGED |
|---|---|---|
| 0.30/0.35 C Max | A216-WCB | A105 |
| 0.25 C Max | A216-WCC | |
| LOW TEMPERATURE STEEL | ||
| 0.25/0.30 C Max | A352-LCB | A350-LF2 |
| 0.5 Mo | A352-LC1 | |
| 2.5 Ni | A352-LC2 | |
| 3.5 Ni | A352-LC3 | |
| C-MN-Si (0.25 Max) | A352-LCC | A350-LF3 |
| C-MN-Si-V (1.15~1.50 Mn) | A350-LF6 | |
Low Temperature Steel Types
| Steel Type | Grade (forging) | Grade (cast) | Composition | Min Temperature |
|---|---|---|---|---|
| Austenitic | A182, F316 | A351 CF8M | 18Cr, 8Ni, 2Mo | -196ºC |
| Nickel Based Steel | A350 LF3 | A352 LC3 | 3 1/2Ni | -101ºC |
| Nickel Based Steel | NO EQUIV | A352 LC2 | 2 1/2Ni | -73ºC |
| Low Temp Carbon Steel | NO EQUIV | A352 LC1 | 0.5Mo | -59ºC |
| Low Temp Carbon Steel | A350 LF2 | A352 LCB | Carbon Steel | -46ºC |
Looking to buy ASTM A350 LF2 Flanges at the best cost in India. You can mail to info@rajtilakmetal.com for A350 Lf2 Equivalent Material to induce live quotes now. Rajtilak Metal is a manufacturer and supplier of A350 Lf2 Class 1 Welding Neck Flange offering in all Ratings up to 3000#, built a distribution network with more then 15 countries globally like Malaysia, India, Thailand, Vietnam, Indonesia, Saudi Arabia (KSA), ASTM A350 Lf2 Yield Strength for Singapore, A350 Lf2 Normalized for Kuwait, Qatar, Philippines, United Arab Emirates (UAE), South Africa, UK, Oman, Bahrain.
A350 Lf2 Equivalent
| Material Group | Common Name | Material Type | UNS | Forging Spec. | Casting Spec. Equivalent | DIN | DIN W. No | Application |
|---|---|---|---|---|---|---|---|---|
| Carbon Steel | CS | C-Si | K03504 | A105 | A216-WCB | C22.8 DIN 17243 | 1.0460 | General non-corrosive service from -29ºC (-20ºF) to 425ºC (800ºF) |
| Low Temperature Carbon Steel | LTCS | C-Mn-Fe | K03011 | A350-LF2 | A352-LCB A352-LCC | TSTE 355 DIN 18103 | 1.0566 | General non-corrosive service from -46ºC (-50ºF) to 340ºC (650ºF), LF2 -46ºC ~ 425ºC |
| Low Temperature Alloy Steel | Nickel Steel | 3.1/2Ni | K32025 | A350-LF3 | A352-LC3 | 10Ni14 | 1.5637 | -101ºC (150ºF) to 340ºC (650ºF) |
ASTM A350 Flange Standard
| ASME/ANSI B16.5 and B16.47 | Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange |
| Pressure Class | 150, 300, 400, 600, 900, 1500, 2500 |
| PN Standards | PN 2.5 TO PN 40 |
| BS Standards | BS10, BS4504 |
| Table | D, E, F, H |
| DIN Flanges | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
| EN Flanges | EN 1092, EN 1092-1, EN 1092-2 |
ASTM A350 LF2 Flange Thermal Expansion
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion co-efficient (@0-100°C/32-212°F) | 10.4 µm/m°C | 5.78 µin/in°F |
| Thermal conductivity | 21.6 W/mK | 150 BTU in/hr.ft².°F |
SAA350 LF2 Tensile Properties at Room Temperature
| LF1 and LF5 Class 1 | LF2 Classes 1 and 2 | LF3 Classes 1 and LF 5 Class 2 | LF 6 | LF 9 | LF 787 | |||
|---|---|---|---|---|---|---|---|---|
| Class 1 | Class | Class 2 | Class 3 | |||||
| Tensile strength, ksi [MPa] | 60-85 [415- 585] | 70-95 [485- 655] | 70-95 [485- 655] | 66-91 [455-630] | 75-100 [515-690] | 63-88 [435- 605] | 65-85 [450-585] | 75-95 [515-655] |
| Yield strength, min, ksi [MPa]B,C Elongation: | 30 [205] | 36 [250] | 37.5 [260] | 52 [360] | 60 [415] | 46 [315] | 55 [380] | 65 [450] |
| Standard round specimen, or small proportional specimen, min % in | 25 | 22 | 22 | 22 | 20 | 25 | 20 | 20 |
| 4D gage length Strip specimen to wall thickness 5⁄16 in. (7.94 mm) and over and for all small sizes tested in full section; min % in 2 in. (50 mm) | 28 | 30 | 30 | 30 | 28 | 28 | 28 | 28 |
| Equation for calculating min elongation for strip specimens thinner than 5⁄16 in. (7.94 mm); min % in 2 in. (50 mm) t p actual thickness in inches | 48t+13 | 48t+15 | 48t+15 | 48t+15 | 48t+13 | 48t+13 | 48t+13 | 48t+13 |
| Reduction of area, min, % | 38 | 30 | 35 | 40 | 40 | 38 | 45 | 45 |
Charpy V-Notch Energy Requirements for standard Size [10 by 10 mm] Specimens
| Grade | Minimum Impact Energy Required for Average of Each Set of Three Specimens, ft·lbf[j] | Minimum Impact Eneragy Permitted for One Specimen only of a Set, ft-lbf[J] |
|---|---|---|
LF1 and LF9 |
13 [18] |
10 [14] |
LF2, Class 1 |
15 [20] |
12 [16] |
LF3 Class 1 |
15 [20] |
12 [16] |
LF5 Class 1 and 2 |
15 [20] |
12 [16] |
LF 787 Classes 2 and 3 |
15 [20] |
12 [16] |
LF6, Class 1 |
15 [20] |
12 [16] |
|
|
|
LF2, Class 2 |
20 [27] |
15 [20] |
20 [27] |
15 [20] |
|
20 [27] |
15 [20] |
Standard Impact Test Temperature for Standard Size [10 by 10 mm] Specimens
| Grade | Test Temperature, °F |
|---|---|
| LF1 | -20[-29] |
| LF2 Class | -50[-46] |
| LF2 Class | -0[-18] |
| LF3 Classes 1 and 2 | -15[-101] |
| LF5 Classes 1 and 2 | -75[-59] |
| LF6 Classes 1 and 2 | -60[-51] |
| LF6 Class 3 | -0[-18] |
| LF9 | -10[-73] |
| LF787 Class 2 | -75[-59] |
| LF787 Class 3 | -100[-73] |
A350 Lf2 Pressure-Temperature Rating
| TEMP °C |
150 | 300 | 400 | 600 | 900 | 1500 | 2500 |
| -29 TO 38 | 19.6 | 51.1 | 68.1 | 102.1 | 153.2 | 255.3 | 425.5 |
| 50 | 19.2 | 50.1 | 66.8 | 100.2 | 150.4 | 250.6 | 417.7 |
| 100 | 17.7 | 46.6 | 62.1 | 93.2 | 139.8 | 233 | 388.3 |
| 150 | 15.8 | 45.1 | 60.1 | 90.2 | 135.2 | 225.4 | 375.6 |
| 200 | 13.8 | 43.8 | 58.4 | 87.6 | 131.4 | 219 | 365 |
| 250 | 12.1 | 41.9 | 55.9 | 83.9 | 125.8 | 209.7 | 349.5 |
| 300 | 10.2 | 39.8 | 53.1 | 79.6 | 119.5 | 199.1 | 331.8 |
| 325 | 9.3 | 38.7 | 51.6 | 77.4 | 116.1 | 193.6 | 322.6 |
| 350 | 8.4 | 37.6 | 50.1 | 75.1 | 112.7 | 187.8 | 313 |
| 375 | 7.4 | 36.4 | 48.5 | 72.7 | 109.1 | 181.8 | 303.1 |
| 400 | 6.5 | 34.7 | 46.3 | 69.4 | 104.2 | 173.6 | 289.3 |
| 425 | 5.5 | 28.8 | 38.4 | 57.5 | 86.3 | 143.8 | 239.7 |
| 450 | 4.6 | 23 | 30.7 | 46 | 69 | 115 | 191.7 |
| 475 | 3.7 | 17.4 | 23.2 | 34.9 | 52.3 | 87.2 | 145.3 |
| 500 | 2.8 | 11.8 | 15.7 | 23.5 | 35.3 | 58.8 | 97.9 |
| 538 | 1.4 | 5.9 | 7.9 | 11.8 | 17.7 | 29.5 | 49.2 |
| TEMP °C |
150 | 300 | 400 | 600 | 900 | 1500 | 2500 |
Product Forms & Dimensional Standards
| The Dimensional Standards for ASTM A350 Forgings | |
|---|---|
| ASME B16.5 | Steel Pipe Flanges and Flanged Fittings |
| ASME B16.9 | Factory-MadeWroughtSteelButt-WeldingFittings |
| ASME B16.11 | Forged Steel Fittings, Socket-Welding and Threaded4 |
| ASME B16.34 | Valves-Flanged, Threaded, and Welding End |
| ASME B16.47 | Large Diameter Steel Flanges |
| API 600 | Steel Gate Valves with Flanged or Butt-Welding Ends |
| API 602 | Compact Design Carbon Steel Gate Valves for Refinery Use |
| API 605 | Large Diameter Carbon Steel Flanges |
Client Reference For ASTM A350 LF2 Flanges In Worldwide
Khulud Tight Gas Project,
Yibal, Oman
Zuluf Field Expansion Project,
Arabian Gulf, Offshore Saudi Arabia (KSA)
Abu Dhabi Gas Distribution Network Pipeline Project,
Abu Dhabi, United Arab Emirates (UAE)
Bul Hanine Redevelopment,
Qatari Coastline, Qatar
Bahrain Deep Gas Exploration Project, Manama, Bahrain
Al-Zour New Refinery Project,
Zour, Kuwait
KrisEnergy’s Cambodia Oil Project,
Cambodia, Thailand
Dung Quat Refinery Project,
Quang Ngai, Vietnam
Ennore Petrochemical Cluster Project (India), Chennai, India
Ophir Oil Field Development,
Offshore Peninsular, Malaysia
Chevron Indonesia Deepwater Development Project,
Jakarta, Indonesia
Batangas LNG Terminal, Batangas, Philippines
ASME SA350 Grade.Lf2 Nippo Flanges stockist, A350 Lf2 Grade Pipe Flanges manufacturers in India. Best selling price on bulk A350 Gr Lf2 Carbon Steel Weld Neck Flanges for piping connection. Sabic approved exporter of Material ASTM A350 Gr Lf2 Square Flanges, A350 Lf2 Cl.1 Plate Flanges/ ASTM A350 LF2 Flanges Traders, SA350 Gr Lf2 Cl1 Body Flanges dealer.
A350 Gr Lf2 Class 1 Slip On Flanges, Finding for nation's largest ASTM A350 Gr Lf2 Loose Flanges manufacturer in India? Buy directly from A350 Lf2 Class 1 Material manufacturers in Mumbai. Sa350 Lf2 Spectacle Blind Flanges stockholder & A350 Lf2 Killed Carbon Steel High Hub Flanges wholesaler Buy Sa350 Lf2 Cl2 Blind Flanges At Low Price.
We have our Manufacturing Unit and Dealers in Gujarat, Ahmedabad, Pune, Chennai, Indore, Kolkata, Delhi, Uttar Pradesh, Kolhapur, Sa350 Lf2 Steel Threaded Flanges for Chhattisgarh, Tamil Nadu, Karnataka, Faridabad, Khopoli, Madhya Pradesh, Gurgaon, Rajkot, Karnataka, Aurangabad, Jaipur, Rajasthan, Raipur, Nagpur, Bhosari, Bangalore, Punjab, Ghaziabad, Haryana, Vadodara, West Bengal, Ludhiana. We are Manufacturer and Exporter of A350 Lf2 Class 1 Welding Neck Flange, A350 lf2 class 1/ 2 Blind Flange in Mumbai, India. All of our ASTM A350 LF2 Flanges is made and tried to worldwide guidelines, and specifications as per ASME, ANSI & ASTM, etc.