ASTM A860 WPHY 52 Fittings
MSS SP-75 52 Elbow and WPHY 52 Tee manufacturer in India.
ASTM A860 WPHY 52 Fittings
MSS SP75 WPHY 52 Elbow
WPHY 52 Fittings Manufacturers
Table Of Contents
- WPHY 52 Meaning?
- ASTM A860 WPHY 52 Fittings Made Used In Applicable Connections?
- Elbow WPHY 52 Use In High Pressure And High Temperature Applications? MSS-SP75 WPHY 52 Properties
- WPHY 52 Specification
- ASTM A860 WPHY 52 Mechanical Properties
- ASTM A860 WPHY 52 Chemical Composition
- Carbon Steel 52 Fittings Pressure Rating
- Dimension Table Of Grade WPHY 52
- ASTM A860 Gr WPHY 52 Weight Chart
- Largest Manufacturer Type Of ASTM A860 WPHY 52 Fittings In India
WPHY 52 Meaning?
WPHY 52 is a high pressure, high temperature performing alloy. It has a pressure capacity of 66KSI. It has high yield strength as well. One of the special properties of the WPHY 52 Fittings is that they are high resistive to hydrogen induced cracking. This allows the fittings such as the >WPHY 52 Elbow Elbow WPHY 52 to perform in applications where hydrogen sulphide is present which could cause hydrogen deposits and eventually block the system.
ASTM A860 WPHY 52 Fittings Made Used In Applicable Connections?
ASTM A860 WPHY 52 Fittings vary in shapes, sizes and functions. The fittings such as adapters, couplings, unions, bends, elbows, barbs, valves and others are made used in applicable connections. The A860 Gr WPHY 52 comprises of phosphorus, sulphur, vanadium, silicon, nickel, titanium, chromium and molybdenum. The composition of the WPHY 52 Fittings gives them special mechanical qualities.
Elbow WPHY 52 Use In High Pressure And High Temperature Applications?
These are also heat treated and their elongation rate safeguards against unwanted thermal expansion. Due to this property, the ASTM A860 WPHY 52 Elbow performs well under high pressure and high temperature applications. Elbows are pipe fittings that connect two pipes with the purpose of redirecting the fluid motion. In this operation, the elbows undergo high pressure. If the system operates under high temperatures and the elbows expand too much, the connection will break. Due to the high pressure and high temperature tolerance of the mss sp 75 wphy 52, it is the best fit for such conditions.
Check MSS-SP 75 WPHY 52 Properties And Standard Specification Of Carbon Steel Elbow WPHY 52.
WPHY 52 Specification
| Specification: | ASTM A860 WPHY 52 Fittings |
| Pressure-Temperature Class | 150LB, 300LB, 600LB, 1500LB, 2500LB. |
| Schedule: | Schedule 5 TO Schedule XXS. |
| Size: | Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48” |
| Type: | Butt Weld (BW), Seamless (SMLS) Welded |
| Thickness: | Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc. |
| Standard | EN, ISO, DIN, JIS, NPT |
| Type | Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross, |
| Connection Type | Threaded/ Clamp End / End Bell / Weld/ Flange/ |
| Type Of Dimension: | BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313 |
Refer WPHY 52 Chemical Composition And Carbon Steel WPHY 52 Buttweld Fittings Dimensions with Tolerances.
ASTM A860 WPHY 52 Mechanical Properties
Check ASTM A860 WPHY 52 mechanical properties
| Fittings Element | Tensile Strength | Elongation | Yield Strength (0.2%Offset) |
| ASTM A860 WPHY 52 Fittings | 515-690 | 28 % | 66 |
ASTM A860 WPHY 52 Chemical Composition
| Fittings Grade | C | Mn | S | P | Si | Ni | Cr | Mo | Cu | Ti | V | Cb | Al |
| ASTM A860 WPHY 52 Fittings | 0.20 | 1.00-1.45 | 0.03 | 0.01 | 0.15-0.40 | 0.50 | 0.30 | 0.25 | 0.35 | 0.05 | 0.10 | 0.06 |
Carbon Steel 52 Fittings Pressure Rating
Dimension Table Of Grade WPHY 52
| NPS | O.D. | 90 Degree Elbow | 45 Degree Elbow | 180 Degree Return | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter) | (inch) | Center to Face (inch) |
Center to Face (inch) |
Center to Face (inch) |
Radius (inch) |
Center to Center (inch) |
Back to face (inch) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| NPS | O.D. | Pipe End Caps | Straight Tee | Straight Cross | Long / Short Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inch.) | (millimeter) | (inch.) | Length (inch.) |
Center to End (inch.) |
Center to End (inch.) |
Lap Diameter (inch.) |
Long Length (inch.) |
Short Length (inch.) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
WPHY 52 Fittings Weight Chart According to ASME B16.9 And Accept All Small And Large Orders Of MSS SP-75 52 Reducer.
ASTM A860 Gr WPHY 52 Weight Chart
|
DN (Normal Pipe Sizes) |
Sch 10S |
Sch 40S |
Sch 80S | ||||||
|
90 Deg Elbow | 45 Deg Elbow | Equal Pipe tee |
90 Deg Elbow | 45 Deg Elbow |
Equal Pipe tee | 90 Deg Elbow | 45 Deg Elbow |
Equal Pipe Tee | |
|
8 |
0.02 |
0.01 |
0.03 |
0.03 |
0.02 |
0.06 |
0.04 |
0.03 |
0.07 |
|
10 |
0.03 |
0.02 |
0.05 |
0.03 |
0.02 |
0.03 |
0.06 |
0.04 |
0.09 |
|
15 |
0.06 |
0.03 |
0.09 |
0.08 |
0.04 |
0.10 |
0.10 |
0.05 |
0.14 |
|
20 |
0.07 |
0.03 |
0.13 |
0.08 |
0.04 |
0.17 |
0.11 |
0.05 |
0.20 |
|
25 |
0.14 |
0.08 |
0.28 |
0.15 |
0.11 |
0.29 |
0.22 |
0.14 |
0.38 |
|
32 |
0.23 |
0.11 |
0.49 |
0.26 |
0.17 |
0.59 |
0.40 |
0.23 |
0.68 |
|
40 |
0.30 |
0.17 |
0.68 |
0.40 |
0.23 |
0.86 |
0.51 |
0.29 |
1.02 |
|
50 |
0.50 |
0.25 |
0.85 |
0.70 |
0.4 |
1.28 |
0.91 |
0.59 |
1.59 |
|
65 |
0.85 |
0.48 |
1.41 |
1.40 |
0.77 |
2.19 |
1.81 |
0.99 |
3.13 |
|
80 |
1.25 |
0.63 |
1.77 |
2.20 |
1.08 |
3.31 |
2.97 |
1.50 |
4.45 |
|
90 |
1.70 |
0.75 |
2.67 |
2.83 |
1.42 |
4.08 |
4.00 |
2.00 |
5.44 |
|
100 |
2.10 |
1.08 |
3.46 |
4.47 |
2.09 |
5.27 |
6.18 |
2.81 |
7.71 |
|
150 |
5.45 |
2.72 |
8.07 |
10.89 |
5.44 |
10.99 |
16.32 |
8.16 |
13.61 |
|
200 |
10.20 |
5.33 |
15.65 |
21.54 |
10.77 |
20.91 |
33.11 |
16.56 |
28.12 |
|
250 |
18.15 |
9.75 |
26.46 |
38.56 |
19.27 |
35.38 |
51.71 |
25.86 |
49.90 |
|
300 |
25.80 |
13.62 |
39.46 |
59.42 |
29.71 |
62.14 |
79.38 |
39.69 |
83.91 |
|
DN (Normal Pipe Sizes) |
Sch 10S |
Sch 40S |
Sch 80S | ||||||
| Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | |
|
40x.25 |
0.19 |
0.19 |
0.60 |
0.26 |
0.26 |
0.76 |
0.34 |
0.34 |
0.90 |
|
50x25 |
0.28 |
0.28 |
0.73 |
0.40 |
0.40 |
1.10 |
0.54 |
0.54 |
1.37 |
|
50x40 |
0.31 |
0.31 |
0.76 |
0.45 |
0.45 |
1.15 |
0.59 |
0.59 |
1.43 |
|
80x.50 |
0.55 |
0.55 |
1.56 |
1.00 |
1.00 |
2.91 |
1.79 |
1.79 |
3.91 |
|
100x50 |
0.78 |
0.78 |
2.94 |
1.50 |
1.50 |
4.48 |
1.95 |
1.95 |
6.55 |
|
100x80 |
0.87 |
0.87 |
3.04 |
1.74 |
1.74 |
4.64 |
2.33 |
2.33 |
6.79 |
|
150x80 |
1.82 |
1.82 |
6.86 |
3.95 |
3.95 |
9.68 |
5.51 |
5.51 |
11.57 |
|
150x100 |
1.96 |
1.96 |
7.10 |
4.07 |
4.07 |
11.94 |
5.96 |
5.96 |
11.97 |
|
200x100 |
3.01 |
3.01 |
13.46 |
6.55 |
6.55 |
17.98 |
9.23 |
9.23 |
24.18 |
|
200x150 |
3.19 |
3.19 |
14.08 |
6.74 |
6.74 |
18.82 |
10.12 |
10.12 |
25.31 |
Global Supplier Of A694 WPHY 52 In India And ASTM A860 WPHY 52 Pipe Fittings Pressure Rating Calculator.
The use of ASTM A860 WPHY 52 Fittings is wide in industries like the petroleum industry, chemical industry, metallurgical industry, construction industry, ship building industry, power generation plants, oil and gas industry and some special domestic applications. A860 Gr WPHY 52 Fittings are manufactured and sold in different types, sizes and prices. Rajtilak Metal is a leading supplier of ASTM A860 MSS SP 75 WPHY 52 Pipe Fittings with reliable prices.
Largest Manufacturer Type Of ASTM A860 WPHY 52 Fittings In India
22 Inch, SCH 40, BW, WPHY 52 Cross Tee
24 Inch, SCH 120, WPHY 52 yield strength Lap Joint Stub Ends
8 Inch, SCH 40, A860 WPHY 52 Return Bends
10 Inch, SCH 40, ASTM A860 WPHY 52 Pipe Elbows
23 Inch DN450 x DN200, A860 gr WPHY 52 Equal Tee
12In, SCH40, API 5L X52 Cross fitting
SCH 40, DN300 * DN200, BW Ends, ASTM A860 gr WPHY 52 Stub Ends
6 Inch, SCH XXS, API 5L X52 Reducing Tee
DN300 * DN200, MSS-SP75 WPHY Pipe Reducer
3 Inch, DN450 x DN200, ASTM A860 WPHY 52 Eccentric Reducer
SCH 40, BW, Carbon Steel Grade 52 End Cap
SCH 120, LTCS, High Yield ASTM A860 WPHY 52 Weld Elbows
CS, 6 Inch, SCH 120, Gr A860 WPHY 52 90 Degree Elbows
2 X 4 Inch, WPHY, Carbon Steel 52 Laterals Tee
Carbon Steel X52 Concentric Reducer
Grade WPHY 52 Weld Eccentric Reducer
Countries We Have Supplied Recently :
| A860 WPHY 52 Fittings | United Kingdom -UK, Europe, UAE, Malaysia |
| A860 Gr WPHY 52 Stub End | Japan, Europe, Romania, Malaysia |
| WPHY 52 Fittings | France, Thailand, Europe, Qatar |
| MSS SP75 WPHY 52 Elbow | Philippines, Nigeria, Australia, UK |
| Carbon Steel WPHY 52 Fittings | Oman, Malaysia, Hong Kong, UAE |
| Carbon Steel WPHY 52 Reducer | Finland, Malaysia, USA, Bangladesh |
| ASTM A234 WPHY 52 Cross fitting | Germany, Czechia, Malaysia, Thailand |
| WPHY 52 Material | United Arab Emirates (UAE), Norway, Malaysia, Turkey |
| WPHY 52 Elbow | Dammam -KSA, Indonesia, Belgium, Philippines. |
| ASTM A860 Grade WPHY 52 Tee | Canada, Singapore, Malaysia, Philippines |
| MSS SP 75 WPHY 52 Pipe Fittings | Egypt, Spain, UK, Mexico |
| Grade WPHY 52 Pipe Reducer | Colombia, Malaysia, Sweden, China |
| Carbon Steel WPHY 52 Lateral Tee | Dubai, Netherlands, Russia, Malaysia |
| ASTM A860 WPHY 52 Fittings | South Africa, Bahrain, Singapore |
| A860 WPHY 52 Return Bends | Italy, Iran, Chile, Singapore |
| Carbon Steel Grade 52 End Cap | Ellington -United States, Poland, Canada, UK |