Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

ASTM A694 F70 Flanges

Refer ASME SA694 F70 Weld Neck Flanges Chemical Composition And Mechanical Properties.

ASTM A694 F70 Flanges

ASTM A694 F70 Flanges

Carbon Steel F70 Flanges

Carbon Steel F70 Flanges

SA 694 F70 RTJ Flanges

SA 694 F70 RTJ Flanges



Different Type Of A694 F70 In Flanges For Use?

The slip on flanges like SA 694 F70 Slip On Flanges provide ease of alignment by their form. With a raised face, the ASME SA 694 F70 SORF Flanges allow for more connection surface between flanges. In systems where closed ends are needed, the Carbon Steel Blind Flanges can be used. The sockets used in ASTM A694 F70 Socket Weld Flanges provide additional cover for the pipes and make the joint stronger.

ASTM A694 F70 Flanges Is Low Alloy Grade Steel?

ASTM A694 F70 Flanges is a specification of carbon steel and alloy steel flanges. ASTM A694 Gr F70 are low alloy grade steel flanges. These are used in low pressure systems commonly. ASTM A694 F70 Weld Neck Flanges have a neck piece welded onto them which can hold the pipe inside the neck. This allows the A694 F70 WNRF Flanges to serve in high bending pressure joints.

A694 F70 Have High Yield Strength?

Carbon Steel A694 F70 Flanges are blind flanges with a raised face used to prevent fluid flow in certain pipelines. A694 F70 are different in that they could be attached through threads onto a threaded pipe end. There are stronger High Yield Carbon Steel F70 Forged Flanges which have high yield strength.


ASTM A694 F70 Flanges


Specification List Of Carbon Steel F70 Blind Flange And PED Approved Manufacturer Of A694 F70 RTJ Flanges In India.


A694 F70 Specifications

Material Specification Of : ASTM A694 F70 Flanges
Low Temperature Above -29 Degree C (−20°F)
Common Types Of Flanges: Slip On (SORF), Weld Neck (WNRF), Blind (BLRF), Lap Joint (Loose), Threaded (NPT), Socket-Weld (SWRF)
Special Types Of Flanges : Nipoflange, Elboflange, Latroflange, Swivel Flange, Expanding Flange, Reducing Flange, Weldoflange
Marking Standard Name of Manufacturer
Schedule
Type of Flange Facing
Nominal Pipe Size
Pressure Class
ASME B16 Designation
Bolt Type high strength bolts
medium strength bolts
low strength bolts
Standard Cover : pressure ratings & temperature ratings, materials, marking, dimensions, weight, tolerances, testing
Contact Faces RTJ (Ring Type Joint), FF (Flat Face), RF (Raised Face), T/G (Tongue And Groove ), M/F (Male And Female)
Size Chart Normal Pipe Size 1/2 to NPS 24"
Thickness Normal Pipe Size ≤ 18
Bore Diameter Normal Pipe ≤ 10
Flanges Standards EN 1092-1, JIS, ASME B16.5, ASME B16.47 type A, UNI, DIN
Pressure Rating Class 150 To Class 2500
High Temperature Above 200°C (400°F) For Class 150 Or Above 400°C (750°F)
European Standard Flanges JIS B2220 Flanges (5k to 30k) and KS1503 flanges
Russian-Standard Flanges GOST 12820 / 12821-80, DIN, UNI, EN 1092-1
South African Standard Flanges SANSflanges And SABS flanges
Surface Finish smooth, concentric serrated, stock
Gaskets Types Full Face Gasket
Flat Ring Gasket
Metallic Ring Gakset
Advantages Of Pipe Flange Used to Connect Pipe System
Easy Repair Pipe System
Assembled Without Welding

PDO Approved ASTM A694 F70 Slip On Flanges Manufacturer In India And ASTM A694 F70 Yield Strength.


A694 F70 Chemical Composition

Gr. C Mn P S Si
ASTM A694 F70 Flanges 0.26-0.265 1.60-1.64 0.025-0.030 0.025-0.030 0.15-0.35

A694 F70 Mechanical Properties

Element Tensile Strength Yield Strength (0.2%Offset) Elongation
ASTM A694 F70 Flanges 415 450 20 %

Grade F70 Physical Properties

ASTM A694 F70 Flanges 485 70 565 82 18

Dimension Table Of High Yield Carbon Steel F70 Flange And A694 F70 Flanges Weight Chart According to ASME B16.5.

Carbon Steel F70 Flanges Dimensions with Tolerances

Carbon Steel F70 Flanges Dimensions with Tolerances


NPS O.D. of Flange Flanges Thickness Diameter of RF Diameter of Hub at Base Lengtd Tdru Hub Bore or Diameter Dia. of Hub at Bevel Radius of Fillet Deptd of Socket
Welding (WN) Neck Slip-On (SORF) Threaded (NPT) Socket (SWRF) Lap Joint (Loose) Slip-on (SORF) Socket (SWRF) Lap Joint (Loose)
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2

Weight Formula Of High Yield F70 Flanges

Nominal Pipe Sizes (NPS) Slip On (SORF) Threaded (NPT) Socket Weld (SWRF) Lap Joint (Loose) Blind (BLRF) Weld Neck (WRNR)
½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
3 3 3 3 4 4
2 5 5 5 5 5 6
8 8 8 8 7 10
3 9 9 9 9 9 11.5
11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268

Check ASTM A694 Grade F70 Pressure Rating Class And SA694 F70 Weld Neck Flanges Thickness With Tolerance.

ASTM A694 Gr F70 Pressure Rating Formula

ASTM A694 F70 Flanges Pressure Rating Chart
Temperature °F 150# 300# 400# 600# 900# 1500# 2500#
-20 to 100 275 720 960 1440 2160 3600 6000
200 230 600 800 1200 1800 3000 5000
300 205 540 720 1080 1620 2700 4500
400 190 495 660 995 1490 2485 4140
500 170 465 620 930 1395 2330 3880
600 140 435 580 875 1310 2185 3640
650 125 430 575 860 1290 2150 3580
700 110 425 565 850 1275 2125 3540
750 95 415 555 830 1245 2075 3460
800 80 405 540 805 1210 2015 3360
850 65 395 530 790 1190 1980 3300
900 50 390 520 780 1165 1945 3240
950 35 380 510 765 1145 1910 3180
1000 20 320 430 640 965 1605 2675
1050 20 310 410 615 925 1545 2570
1100 20 255 345 515 770 1285 2145
1150 20 200 265 400 595 995 1655
1200 20 155 205 310 465 770 1285
1250 20 115 150 225 340 565 945
1300 20 85 115 170 255 430 715
1350 20 60 80 125 185 310 515
1400 20 50 65 95 145 240 400
1450 15 35 45 70 105 170 285
1500 10 25 35 55 80 135 230

SA 694 F70 Thickness Tolerance

ASTM A694 F70 Flanges Wall Thickness
NPS (Normal Pipe Sizes) Outside Daimeter (O.D.) Schedule 10 Schedule 20 Schedule 30 STD Wall Schedule 40 Schedule 60 EXT Hvy Schedule 80 Schedule 100 Schedule 120 Schedule 140 Schedule 160 XX Hvy
½ 0.84 0.083 ... ... 0.109 0.109 ... 0.147 0.147 ... ... ... 0.188 0.294
¾ 1.05 0.083 ... ... 0.113 0.113 ... 0.154 0.154 ... ... ... 0.219 0.308
1 1.315 0.109 ... ... 0.133 0.133 ... 0.179 0.179 ... ... ... 0.25 0.358
1 ¼ 1.66 0.109 ... ... 0.14 0.14 ... 0.191 0.191 ... ... ... 0.25 0.382
1 ½ 1.9 0.109 ... ... 0.145 0.145 ... 0.2 0.2 ... ... ... 0.281 0.4
2 2.375 0.109 ... ... 0.154 0.154 ... 0.218 0.218 ... ... ... 0.344 0.436
2 ½ 2.875 0.12 ... ... 0.203 0.203 ... 0.276 0.276 ... ... ... 0.375 0.552
3 3.5 0.12 ... ... 0.216 0.216 ... 0.3 0.3 ... ... ... 0.438 0.6
3 ½ 4 0.12 ... ... 0.226 0.226 ... 0.318 0.318 ... ... ... ... 0.636
4 4.5 0.12 ... ... 0.237 0.237 ... 0.337 0.337 ... 0.438 ... 0.531 0.674
5 5.563 0.134 ... ... 0.258 0.258 ... 0.375 0.375 ... 0.5 ... 0.625 0.75
6 6.625 0.134 ... ... 0.28 0.28 ... 0.432 0.432 ... 0.562 ... 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 ...
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 ...
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 ...
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 ...
22 22 0.25 ... ... 0.375 ... ... 0.5 ... ... .... .... .... ....
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 ....
26 26 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
30 30 0.312 0.5 0.625 0.375 .... .... 0.5 .... .... .... .... .... ....
36 36 0.312 0.5 0.625 0.375 0.75 .... 0.5 .... .... .... .... .... ....
40 40 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
42 42 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..
48 48 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..

ASTM A694 F70 Blind Flanges Bolt Pattern

Class 150 Flanges Class 300 Flanges Class 600 Flanges
NPS # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length
1/16 RF RTJ 1/16 RF RTJ 1/4 RF RTJ
1/2 4 0.50 2-1/4 4 0.50 2-1/2 3 4 0.50 3 3
3/4 4 0.50 2-1/2 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1 4 0.50 2-1/2 3 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1-1/4 4 0.50 2-3/4 3-1/4 4 0.63 3-1/4 3-3/4 4 0.63 3-3/4 3-3/4
1-1/2 4 0.50 2-3/4 3-1/4 4 0.75 3-1/2 4 4 0.75 4-1/4 4-1/4
2 4 0.63 3-1/4 3-3/4 8 0.63 3-1/2 4 8 0.63 4-1/4 4-1/4
2-1/2 4 0.63 3-1/2 4 8 0.75 4 4-1/2 8 0.75 4-3/4 4-3/4
3 4 0.63 3-1/2 4 8 0.75 4-1/4 4-3/4 8 0.75 5 5
3-1/2 8 0.63 3-1/2 4 8 0.75 4-1/4 5 8 0.88 5-1/2 5-1/2
4 8 0.63 3-1/2 4 8 0.75 4-1/2 5 8 0.88 5-3/4 5-3/4
5 8 0.75 3-3/4 4-1/4 8 0.75 4-3/4 5-1/4 8 1.00 6-1/2 6-1/2
6 8 0.75 4 4-1/2 12 0.75 4-3/4 5-1/2 12 1.00 6-3/4 6-3/4
8 8 0.75 4-1/4 4-3/4 12 0.88 5-1/2 6 12 1.13 7-1/2 7-3/4
10 12 0.88 4-1/2 5 16 1.00 6-1/4 6-3/4 16 1.25 8-1/2 8-1/2
12 12 0.88 4-3/4 5-1/4 16 1.13 6-3/4 7-1/4 20 1.25 8-3/4 8-3/4
14 12 1.00 5-1/4 5-3/4 20 1.13 7 7-1/2 20 1.38 9-1/4 9-1/4
16 16 1.00 5-1/4 5-3/4 20 1.25 7-1/2 8 20 1.50 10 10
18 16 1.13 5-3/4 6-1/4 24 1.25 7-3/4 8-1/4 20 1.63 10-3/4 10-3/4
20 20 1.13 6-1/4 6-3/4 24 1.25 8 8-3/4 24 1.63 11-1/4 11-1/2
24 20 1.25 6-3/4 7-1/4 24 1.50 9 10 24 1.88 13 13-1/4

Ask Free Sample Types Of ASTM A694 F70 Flanges

4 inch, SCH 40, Class 150, PN25, ASTM A694 Gr F70 Slip On Flanges

4 inch, SCH 40, Class 150, PN25, ASTM A694 Gr F70 Slip On Flange

3 inch, 125#, Schedule 5, Carbon Steel F70 Socket Weld Flanges

3 inch, 125#, Schedule 5, Carbon Steel F70 Socket Weld Flange

1 inch, 1500#, Schedule 160, ASTM A694 F70 Blind Flanges

1 inch, 1500#, Schedule 160, ASTM A694 F70 Blind Flange

4 inch, Schedule 5, RF 300LB, High Yield CS A694 Gr F70 Weld Neck Flanges

4 inch, Schedule 5, RF 300LB, High Yield CS A694 Gr F70 Weld Neck Flange

8 inch, 300#, Flate Face, A694 F70 Threaded Flanges

8 inch, 300#, Flate Face, A694 F70 Threaded Flange

2 inch, SCH 80, 600#, ASTM A694 Grade F70 Lap Joint Flanges

2 inch, SCH 80, 600#, ASTM A694 Grade F70 Lap Joint Flange

1-1/2 inch, Class 150, FF, ASME SA 694 F70 Long Weld Neck Flanges

1-1/2 inch, Class 150, FF, ASME SA 694 F70 Long Weld Neck Flange

3 inch, 600#, RF, Steel Grade F70 Spectacle Blind Flanges

3 inch, 600#, RF, Steel Grade F70 Spectacle Blind Flange

4 inch, Class 300, High Yield CS A694 Gr F70 Plate Flanges

4 inch, Class 300, High Yield CS A694 Gr F70 Plate Flange

3/4 inch, 150#, Carbon Steel F70 Ring Type Joint Flanges

3/4 inch, 150#, Carbon Steel F70 Ring Type Joint Flange

18 inch, Class 600, F70 Carbon Steel Tongue & Groove Flanges

18 inch, Class 600, F70 Carbon Steel Tongue & Groove Flange

1 inch. 1500LB, A694 CS Gr F70 Reducing Flanges

1 inch. 1500LB, A694 CS Gr F70 Reducing Flange

6 inch, SCH 120, Carbon Steel A694 F70 Forged Flanges

6 inch, SCH 120, Carbon Steel A694 F70 Forged Flange

12 inch, 1500#, SCH 120, F70 Carbon Steel Raised Face Flanges

12 inch, 1500#, SCH 120, F70 Carbon Steel Raised Face Flange

3 inch, SCH 120, 900#, SA 694 F70 Male and Female Flange

3 inch, SCH 120, 900#, SA 694 F70 Male and Female Flange

3 inch, SCH 80, Class 900, ASTM A694 Grade F70 Bleed Ring

3 inch, SCH 80, Class 900, ASTM A694 Grade F70 Bleed Ring


We Supplied A Comprehensive Range Of ASTM A694 F70 Flanges To The Following Countries:

Steel Grade F70 Square Flanges Europe, Thailand, France, Qatar
ASTM A694 Grade F70 Ring Type Joint Flanges Czechia, Malaysia, Germany, Thailand
ASTM A694 Carbon Steel F70 Paddle Spacer Flanges Malaysia, USA, Finland, Bangladesh
SA 694 F70 Slip On Flanges Europe, Romania, Japan, Malaysia
ASTM A694 F70 Steel Blind Flanges Colombia, Malaysia, Sweden, China
Carbon Steel A694 Gr F70 Blind Flanges Iran, Chile, Italy, Singapore
Carbon Steel Grade F70 Lap Joint Flanges Egypt, Spain, UK, Mexico
ASTM A694 F70 Flanges Norway, Malaysia, United Arab Emirates (UAE), Turkey
Carbon Steel A694 Grade F70 Threaded Flanges Netherlands, Russia, Dubai, Malaysia
High Yield Carbon Steel F70 Forged Flanges South Africa, Saudi Arabia (KSA), Kuwait, Brazil
Carbon Steel F70 Plate Flanges Philippines, Australia, Nigeria, UK
F70 Carbon Steel Orifice Flanges Hong Kong, Malaysia, Oman, UAE
ASTM A694 Gr F70 Pipe Flanges Dammam -KSA, Indonesia, Belgium, Philippines.
A694 F70 Wld Neck Flanges Philippines, Malaysia, Canada, Singapore
A694 Grade F70 Loose Flanges South Africa, Bahrain, Singapore


About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Rajtilak Metal © 2021 All Right Reserved. Website Designed And SEO by Mesotek
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy