Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

ASTM A694 F60 Flanges

Suppliers Of A694 F60 Material, A694 Gr F60 SORF Flanges Manufacturer In Mumbai, India.

A694 Grade F60 Loose Flanges Manufacturer in Mumbai, India, stockist Of ASTM A694 Gr F60 Pipe Flanges, Carbon Steel A694 Grade F60 BLRF Flanges Price Per Kg.

ASTM A694 F60 Flanges are carbon steel and alloy steel flange specifications. The ASTM A694 Gr F60 Pipe Flanges are made of F60 duplex steel. ASTM A694 F60 Weld Neck Flanges have high durability and tensile strength due to the making material. A694 F60 WNRF Flanges have a duplex steel welded neck with a raised face. SA 694 F60 Slip On Flanges are duplex steel flanges that have the bore diameter matching the pipe diameter so that they allow the pipe to slip through them for easy handling and better alignment. Flange ASTM A694 F60 can perform under high temperature and pressure requirements due to the F60 duplex steel material.

ASTM A694 F60 Flanges Manufacturer In India

ASTM A694 F60 Flanges

A694 F60 Material

A694 F60 Material

A694 Gr F60 SORF Flanges

A694 Gr F60 SORF Flanges

Ask free sample from A694 F60 WNRF Flanges stockist in Mumbai, India, SA 694 F60 Slip On Flanges manufacturers, A694 F60 Flanges exporter in India, Check ASTM A694 F60 Weld Neck Flanges Price List.


What is ASTM A694 F60 Flanges?


ASTM A694 F60 Flanges

ASME SA 694 F60 SORF Flanges are forged flanges and there are other different types like the ASTM A694 F60 Steel Blind Flanges and the ASTM A694 F60 Carbon Steel SWRF Flanges. The Carbon Steel A694 Grade F60 BLRF Flanges are blind flanges with a raised face whereas the A694 Carbon Steel Gr F60 Threaded Flanges are flanges with a thread.

High Yield Carbon Steel F60 Forged Flanges can be used in high strength pipe systems due to their higher yield strength. The Carbon Steel F60 Plate Flanges have plates attached to them for various reasons. The orifice type F60 Carbon Steel Orifice Flanges are also available with us. The High Yield CS A694 Gr F60 High Hub Flanges are flanges with a welded neck for extra alignment and grip with the pipes. Grade F60 Flat Flanges have no raised faces and allow maximum surface for the gasket to attach. A694 Grade F60 Loose Flanges are rings with bolting holes that could be attached to one pipe. They can be attached to any other flange. Steel Grade F60 Square Flanges are also in the used in special cases. ASTM A694 Grade F60 Ring Type Joint Flanges are the ones with a groove on one side of the flange where the gasket can sit and get squeezed into. This allows the Grade F60 Steel RTJ Flanges to have maximum tightness and especially be leak proof in fluid flow lines.

A694 F60 Material Price List In India


SR NO CAT DESCRIPTION UOM QNTY Unit Price USD ($)
1 FLANGE WELDNECK CARBON STEEL, ASTM A694 GR.F60, FLANGE, WELDNECK, 10IN, 9.3MM, 900LBS, RAISED FACE, ASME/ANSI B16.5, END CONNECTION: BUTT WELD, SOUR SERVICE: NACE MR-0175 Nos 360 $714.54
2 FLANGE WELDNECK CARBON STEEL, ASTM A694 GR.F60, FLANGE, WELDNECK, 16IN, 11.1MM, 600LBS, RAISED FACE, ASME/ANSI B16.5, END CONNECTION: BUTT WELD, SOUR SERVICE: NACE MR-0175 Nos 150 $808.13
3 FLANGE WELDNECK CARBON STEEL, ASTM A694 GR.F60, FLANGE, WELDNECK, 8IN, 8.2MM, 900LBS, RAISED FACE, ASME/ANSI B16.5, END CONNECTION: BUTT WELD, SOUR SERVICE: NACE MR-0175 Nos 750 $301.25
4 FLANGE BLIND CARBON STEEL, ASTM A694 GR.F60, FLANGE, BLIND, 10IN, 900LBS, FORGED, ASME/ANSI B16.5, SOUR SERVICE: NACE MR-0175 Nos 30 $495.00
5 FLANGE SW NECK CARBON STEEL, ASTM A694 GR.F60, FLANGE, WELDNECK, 16IN, SCH-80, 600LBS, RAISED FACE, ASME/ ANSI B16.5, END CONNECTION:BUTT WELD, SOUR SERVICE: NACE MR-0176 Nos 30 $796.00
6 FLANGE BLIND CARBON STEEL, ASTM A694 GR.F60, FORGED, FLANGE, BLIND, 10IN, 600LBS, ASME/ANSI B16.5, SOUR SERVICE: NACE MR-0175 Nos 60 $410.63
7 FLANGE PLATE CARBON STEEL, ASTM A694 GR.F60, FLANGE, PLATE, 16IN, SCH-80, 600LBS, RAISED FACE, ASME/ANSI B16.5, END CONNECTION:BUTT WELD, SOUR SERVICE: NACE MR-0176 Nos 30 $730.00
8 FLANGE LAPJOINT CARBON STEEL, ASTM A694 GR.F60, ASME/ ANSI B16.5, FLANGE, LAPJOINT, 1/2IN, 600LBS, SOUR SERVICE: NACE MR-0175 Nos 210 $18.00
9 FLANGE LAPJOINT CARBON STEEL, ASTM A694 GR.F60, FLANGE, LAPJOINT, 1/2IN, 600LBS, ASME/ ANSI B16.5 Nos 90 $14.39
10 FLANGE BLIND CARBON STEEL, ASTM A694 GR.F60, FLANGE, BLIND, 16IN, 600LBS, ASME/ANSI B16.5, SOUR SERVICE: NACE MR-0175 Nos 60 $670.13
11 FLANGE WELDNECK CARBON STEEL, ASTM A694 GR.F60, FLANGE, WELDNECK, 10IN,9.3MM, 600LBS, RAISED FACE, ASME/ANSI B16.5, END CONNECTION: BUTT WELD, SOUR SERVICE: NACE MR-0175 Nos 360 $410.70
12 FLANGE SW NECK CARBON STEEL, ASTM A694 GR.F60, FLANGE, WELDNECK, 16IN, SCH-80, 600LBS, RAISED FACE, ASME/ANSI B16.5, END CONNECTION: BUTT WELD, SOUR SERVICE: NACE MR-0176 Nos 30 $790.00
13 FLANGE WNRT FLANGE WNRT J 1- 13/16 AP10000 SCH 12.7 A694 F60 MOC :ASTM A694 F60, APL 6BX AP10000 Nos - $119.60 (INR 8,586/Pcs)
14 FLANGE WELDNECK ASTM A694 F60 SOUR, 6" WELD NECK FLG, 7.9 mmThk, 600# Nos 330 $130.00
15 FLANGE WELDNECK ASTM A694 F60 SOUR, 6" WELD NECK FLG, 7.9 mmThk, 900# Nos 180 $195.00
16 FLANGE WNRT ASTM A694F60 ASME B16.5, WNRT J4SCH XXS 2500#A694 F60 Nos - $309.91 (INR 22,248 /Pcs)
17 FLANGES WNRT FLANGES WNRTJ 1-13/16 AP10000#SCH12.7 A694 F60, MOC:ASTM A694 F60 API 6BX API 10000 Nos - $119.60 (INR 8,586/Pcs)

Please note this is an approx Price of ASTM A694 Gr F60 Pipe Flanges in India. For final ASTM A694 F60 Weld Neck Flanges Price List Please Call on +91 22 66109735 or drop an Email to info@rajtilakmetal.com.


ASTM A694 F60 Specification


Specialized Manufacturer of A694 Carbon Steel Gr F60 Threaded Flanges in India

Material: ASTM A694 F60 Flanges
ANSI ClaLTCS A694 Flanges: 150 to 2500 Size: 1/2"-24"
AWWA ClaLTCS ASTM A694 Flanges: classes B, D, E, F Size: 3"-144"
ASME SA 694 F60 SORF Flanges pressure classes: 150, 300, 400, 600, 900, 1500 and 2500 for ASME B16.5
ASTM A694 Gr F60 Pipe Flanges Origin: European Origin, Indian Origin, US Origin, Korean Origin, Sweden Origin, Ukraine Origin, Japanese Origin Materials
ASTM A694 F60 Weld Neck Flanges Manufacturing Dimensions: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
A694 F60 WNRF Flanges Standard: ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
ASTM A694 F60 Steel Blind Flanges Specialized in: ASTM A105/105N SORF, SOFF, BLRF, BLFF, WNRF, WNFF, SWRF, SWFF, Threaded RF, Threaded FF & LJ
ANSI B16.47 A694 Carbon Steel Gr F60 pressure classes: 75, 150, 300, 400, 600, 900 for ASME B16.47
A694 F60 Flanges Size Range: 1/2″ (15 NB) to 48″ (1200NB), ASME B16.47 Flanges size range: 26″ to 60″
SA 694 F60 Slip On Flanges Class / Pressure: 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
ASTM A694 F60 Carbon Steel SWRF Flanges Types of flanges in India: A694 F60 Flanges, Flange ASTM A694 F60, ASTM A694 Gr F60 Pipe Flanges, ASTM A694 F60 Weld Neck Flanges, A694 F60 WNRF Flanges, SA 694 F60 Slip On Flanges, ASME SA 694 F60 SORF Flanges, ASTM A694 F60 Steel Blind Flanges, ASTM A694 F60 Carbon Steel SWRF Flanges, Carbon Steel A694 Grade F60 BLRF Flanges, A694 Carbon Steel Gr F60 Threaded Flanges, High Yield Carbon Steel F60 Forged Flanges, Carbon Steel ASME SA694 F60 Paddle Blank Flanges, ASTM A694 Carbon Steel F60 Paddle Spacer Flanges, A694 Carbon Steel F60 Spectacle Blind Flanges, Carbon Steel F60 Nippo Flanges, Carbon Steel A694 Gr F60 Blind Flanges, Carbon Steel F60 Plate Flanges, F60 Carbon Steel Orifice Flanges, High Yield CS A694 Gr F60 High Hub Flanges, Grade F60 Flat Flanges, A694 Grade F60 Loose Flanges, Steel Grade F60 Square Flanges, ASTM A694 Grade F60 Ring Type Joint Flanges, Grade F60 Steel RTJ Flanges, Steel Grade F60 Groove & Tongue Flanges, ASTM A694 Steel Grade F60 Expander Flanges, High Yield CS A694 Grade F60 Screwed Flanges, Carbon Steel ASTM A694 Grade F60 Awwa Flanges, Grade F60 Carbon Steel Body Flanges, Carbon Steel Grade F60 Lap Joint Flanges, A694 CS Gr F60 Weld Neck Flanges, Carbon Steel A694 F60 Lap Joint Flanges etc.
Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ), LJ, FM , R.T.J , R.J and so on
Flange ASTM A694 F60 Typical manufacturing specifications: ASTM A694 Gr F60, SA 694 F60, ASME SA 694 F60, Carbon Steel F60
Top 10 Manufacturer of Carbon Steel F60 Plate Flanges: Raccortubi S.p.A. Flanges, Italy, Erne Fittings Flanges, Austria, Melesi Flanges, Italy, Mega Flanges, Italy, Ulma Flanges, Spain, TecnoForge Flanges, Italy, BENKAN Corporation Flanges, Japan, BKL- Thai Benkan Flanges, Thailand, Lame S.r.l. Flanges, Italy, Metal far Flanges, Italy, Rajtilak Metal, India
F60 Carbon Steel Orifice Flanges Delivery: 15-20 days

Prestige quality ASTM A694 F60 Flanges manufacturers in India offer these A694 F60 Equivalent Material in EN, DIN, ISO, BS, JIS or ANSI standard.


Types Of ASTM A694 F60 Flanges


ASTM A694 Gr F60 Slip On Flanges

ASTM A694 Gr F60 Slip On Flanges

ASTM A694 F60 Socket Weld Flanges

ASTM A694 F60 Socket Weld Flanges

A694 F60 Blind Flanges

A694 F60 Blind Flanges

SA 694 F60 Weld Neck Flanges

SA 694 F60 Weld Neck Flanges

ASME SA 694 F60 Threaded Flanges

ASME SA 694 F60 Threaded Flanges

ASTM A694 F60 Carbon Steel Lap Joint Flanges

ASTM A694 F60 Carbon Steel Lap Joint Flanges

Carbon Steel A694 Grade F60 Long Weld Neck Flanges

Carbon Steel A694 Grade F60 Long Weld Neck Flanges

High Yield Carbon Steel F60 Spectacle Blind Flanges

High Yield Carbon Steel F60 Spectacle Blind Flanges

A694 Grade F60 Plate Flanges

A694 Grade F60 Plate Flanges

ASTM A694 Carbon Steel F60 Ring Type Joint Flanges

ASTM A694 Carbon Steel F60 Ring Type Joint Flanges

A694 Gr F60 Tongue & Groove Flanges

A694 Gr F60 Tongue & Groove Flanges

ASTM A694 Gr F60 Reducing Flanges

ASTM A694 Gr F60 Reducing Flanges

ASTM A694 Grade F60 Forged Flanges

ASTM A694 Grade F60 Forged Flanges

ASTM A694 F60 Pipe Raised Face Flanges

ASTM A694 F60 Pipe Raised Face Flanges

ASTM A694 F60 Steel Male and Female Flange

ASTM A694 F60 Steel Male and Female Flange

A694 CS Gr F60 Bleed Ring

A694 CS Gr F60 Bleed Ring


Rajtilak Metal is an ISO certified ASTM A694 F60 Flanges manufacturers & ASTM A694 F60 Casting Equivalent distributor in India


ASTM A694 F60 Chemical Composition


Check A694 F60 Chemical Composition

Chemical Composition of ASTM A694, Heat Analysis, %
Carbon [C] ≤0.30
Manganese [Mn] ≤1.60
Phosphorus [P] ≤0.025
Sulfur [S] ≤0.025
Silicon [Si] 0.15-0.35

*1. Alloying elements including Cu, Ni, Cr, Mo, V, Nb and B shall be reported if any.
*2. No limits apply to above-mentioned elements of A694 forgings furnished in carbon or low alloy steel.
*3. ASTM A694 forgings furnished in alloy steel should be in conformance to ASTM A707 Grade L5.
*4. When required, the carbon equivalent CE shall be calculated as per C+Mn/6+(Cr+Mo+V)/5+(Cu+Ni)/15.


Rajtilak Metal is a ASTM A694 F60 Flanges manufacturers and supplier of offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.


A694 F60 Mechanical Properties


View ASTM A694 F60 Mechanical Properties

Element Tensile Strength Yield Strength (0.2%Offset) Elongation
ASTM A694 F60 515 415 20 %

SA 694 F60 Physical Properties


A694 F60 FLANGES 415 60 515 75 20

ASTM A694 Grade F60 Tensile Requirements


A694 F60 60 [415] 75 [515] 20

ASTM A694 F60 Temperature Range


Temp. °C Working Pressure by Classes, bar
150 300 400 600 900 1500 2500
-29 ~ 38 19.6 51.1 68.1 102.1 153.2 255.3 425.5
50 19.2 50.1 66.8 100.2 150.4 250.6 417.7
100 17.7 46.6 62.1 93.2 139.8 233.0 388.3
150 15.8 45.1 60.1 90.2 135.2 225.4 375.6
200 13.8 43.8 58.4 87.6 131.4 219.0 365.0
250 12.1 41.9 55.9 83.9 125.8 209.7 349.5
300 10.2 39.8 53.1 79.6 119.5 199.1 331.8
325 9.3 38.7 51.6 77.4 116.1 193.6 322.6
350 8.4 37.6 50.1 75.1 112.7 187.8 313.0
375 7.4 36.4 48.5 72.7 109.1 181.8 303.1
400 6.5 34.7 46.3 69.4 104.2 173.6 289.3
425 5.5 28.8 38.4 57.5 86.3 143.8 239.7
450 4.6 23.0 30.7 46.0 69.0 115.0 191.7
475 3.7 17.4 23.2 34.9 52.3 87.2 145.3
500 2.8 11.8 15.7 23.5 35.3 58.8 97.9
538 1.4 5.9 7.9 11.8 17.7 29.5 49.2

*ASTM A694 F60 flanges are not recommended for prolonged use above 425°C since upon prolonged exposure to temperature above 425°C, the carbide phase of steel may be converted to graphite causing brittleness problems.

We are well-known as a trusted Manufacturer of ASTM A694 F60 Flanges in Mumbai, India. Rajtilak Metal is a Govt. approved certified Stockist of ASTM A694 Gr F60 Pipe Flanges in India, We have our ASTM A694 Gr F60 Lap Joint Flanges distributor and wholesaler in Malaysia, Indonesia, ASTM A694 F60 for Singapore, United Arab Emirates (UAE) & South Africa.


ASTM A694 F60 UNS Number Number


Check ASTM A694 F60 UNS Number: UNS number K03014


Difference Between A694 F60 Vs A350 Lf2


Add Difference Between A694 F60 Vs A350 Lf2 ...............


ASTM A694 F60 Flanges Thermal


Coefficient of thermal expansion 1.32E-5 - 1.38E-5 1/K at 20 °C Typical for Low Carbon Steel
Max service temperature 500 °C Typical for Carbon Steel
Melting point 1480 - 1526 °C Typical for Low Carbon Steel

ASTM A694 F60 Pipe Magnetic


Curie temperature 770 °C at 20 °C Typical for Low Carbon Steel

ASTM A694 F60 Heat Treatment


The ASTM A694 F60 Flanges forgings can be furnished in low alloy steel, carbon steel or alloy steel, chrome moly steel. The steel shall be made by either open electric furnace, hearth, or basic oxygen process and it shall be fully deoxidized. However, ASTM A694 Gr F60 Pipe Flanges shall not be machined directly from plate nor from solid bar stock since sufficient hot working(forging) is necessary to develop a wrought structure throughout the part. low carbon steel and alloy steel heat treatment shall be in the range from 1000 to 1225 °F [540 to 665 °C]. Heat treatment of low-alloy steel and high-strength carbon steel may consist of normalizing, quenching-and tempering, or normalizing-and-tempering. A694 F60 Heat Treatment.


ASME SA 694 F60 Flanges Dimensions


Nominal Pipe Size
Flanges Inside Diameter (ID)
(inch)
Flanges Outside Diameter (OD)
(inches)
Class 150 Class 300 Class 400 Class 600 Class 900
1/2 0.84 1.875 2.125 2.125 2.125 2.50
3/4 1.06 2.25 2.625 2.625 2.625 2.75
1 1.31 2.625 2.875 2.875 2.875 3.125
1 1/4 1.66 3 3.25 3.25 3.25 3.50
1 1/2 1.91 3.375 3.75 3.75 3.75 3.875
2 2.38 4.125 4.375 4.375 4.375 5.625
2 1/2 2.88 4.875 5.125 5.125 5.125 6.50
3 3.50 5.375 5.875 5.875 5.875 6.625
4 4.50 6.875 7.125 7.00 7.625 8.125
5 5.56 7.75 8.50 8.375 9.50 9.75
6 6.62 8.75 9.875 9.75 10.50 11.375
8 8.62 11 12.125 12.00 12.625 14.125
10 10.75 13.375 14.25 14.125 15.75 17.125
12 12.75 16.125 16.625 16.50 18.00 19.625

ASTM A694 F60 Flanges Weight Chart


15mm (1/2″)

Standard Class Diameter Bolt Circle Diameter Number of Bolts Bolt Size Diameter of Bolt Hole
AS4087 PN14 95 67 4 M12 14
AS 2129 Flange Table C 95 67 4 13 14
Table D 95 67 4 13 14
Table E 95 67 4 13 14
Table F 95 67 4 13 14
Table H 114 83 4 16 17
Table J 114 83 4 16 17
ANSI B16.5 ANSI 150 89 60 4 13 16
ANSI 300 95 67 4 13 16
ANSI 600 95 67 4 13 16
ANSI 900 121 83 4 19 22
ANSI 1500 121 83 4 19 22
ISO 7005 (DIN) Flange PN6 80 55 4 M10 11
PN10 95 65 4 M12 14
PN16 95 65 4 M12 14
PN20 90 60.5 4 M14 16
PN25 95 65 4 M12 14
PN40 95 65 4 M12 14


CS Long Weld Neck Flanges Grade F60 CS Awwa Flanges
Carbon Steel High Yeild F60 Body Flanges ASTM F694 Blind Flanges
ASTM A694 F60 Ring Joint Flanges ASTM, ASME Flanges
F60 Carbon Steel Orifice Flanges High Yield CS A694 Gr F60 High Hub Flanges
Grade F60 Flat Flanges A694 Grade F60 Loose Flanges
Steel Grade F60 Square Flanges ASTM A694 Grade F60 Ring Type Joint Flanges
A694 Carbon Steel F60 Spectacle Blind Flanges Carbon Steel F60 Nippo Flanges
Carbon Steel A694 Gr F60 Blind Flanges Carbon Steel Grade F60 Lap Joint Flanges
ASTM A694 F60 Weld Neck Flanges A694 F60 WNRF Flanges
ASTM A694 Gr F60 Equivalent ASTM A694 F60 Heat Treatment
ASTM A694 F60 Ultimate Tensile Strength Weldolet A694 F60
CS A694 F60 Threaded Flanges Carbon Steel Paddle Blank Flanges
A694 CS Paddle Spacer Flanges F60 Carbon Steel Spectacle Blind Flanges
Astm A694 F60 Flanges Carbon Steel F60 Flanges
Carbon Steel Pipe Fittings Carbon Steel A694 Buttweld Fittings
Carbon Steel RTJ Flanges CS Forged Flanges
ASTM A694 F60 Slip On Flanges ASTM A694 F60 Weld Neck Flanges
Carbon Steel F60 Loose Flanges CS ASTM A649 Screwed Flanges
Carbon Steel ASME SA694 F60 Paddle Blank Flanges ASTM A694 Carbon Steel F60 Paddle Spacer Flanges
Carbon Steel A694 Grade F60 BLRF Flanges A694 Carbon Steel Gr F60 Threaded Flanges
High Yield Carbon Steel F60 Forged Flanges Carbon Steel F60 Plate Flanges
A694 CS Gr F60 Weld Neck Flanges Carbon Steel A694 F60 Lap Joint Flanges
Grade F60 Steel RTJ Flanges Steel Grade F60 Groove & Tongue Flanges
SA 694 F60 Slip On Flanges ASME SA 694 F60 SORF Flanges
ASTM A694 F60 Steel Blind Flanges ASTM A694 F60 Carbon Steel SWRF Flanges
ASTM A694 Steel Grade F60 Expander Flanges High Yield CS A694 Grade F60 Screwed Flanges
Carbon Steel ASTM A694 Grade F60 Awwa Flanges Grade F60 Carbon Steel Body Flanges
CS A694 BLRF Flanges ASTM A694 F60 Plate Flanges
CS A694 F60 Threaded Flanges CS A694 F60 Industrial Flanges
ASTM A694 F60 Socket Weld Flanges ASTM A694 F60 Flanges
ASTM A694 F60 Vs A105 ASTM A694 F60 Casting Equivalent
ASTM A694 F60 Vs A350 Lf2 ASTM A694 F60 Vs A105
ASTM A694 F60 Equivalent Material ASTM A694 F60 Casting Equivalent

Looking to buy ASTM A694 F60 Flanges at the best cost in India. You can mail to info@rajtilakmetal.com for ASME SA 694 F60 SORF Flanges to induce live quotes now. Rajtilak Metal is a manufacturer and supplier of Carbon Steel A694 Grade F60 BLRF Flanges offering in all Ratings up to 3000#, built a distribution network with more then 15 countries globally like Malaysia, India, Thailand, Vietnam, Indonesia, Saudi Arabia (KSA), A694 Carbon Steel Gr F60 Threaded Flanges for Singapore, Kuwait, Qatar, High Yield Carbon Steel F60 Forged Flanges for Philippines, United Arab Emirates (UAE), South Africa, UK, Oman, Bahrain.


Check our clientele in Worldwide:


Ennore Petrochemical Cluster Project

Ennore Petrochemical Cluster Project (India), Chennai, India

Ophir Oil Field Development

Ophir Oil Field Development,
Offshore Peninsular, Malaysia

Chevron Indonesia Deepwater Development Project

Chevron Indonesia Deepwater Development Project,
Jakarta, Indonesia

Batangas LNG Terminal

Batangas LNG Terminal, Batangas, Philippines

Bahrain Deep Gas Exploration Project

Bahrain Deep Gas Exploration Project, Manama, Bahrain

Al-Zour New Refinery Project

Al-Zour New Refinery Project,
Zour, Kuwait

KrisEnergy’s Cambodia Oil Project

KrisEnergy’s Cambodia Oil Project,
Cambodia, Thailand

Dung Quat Refinery Project

Dung Quat Refinery Project,
Quang Ngai, Vietnam

Khulud Tight Gas Project

Khulud Tight Gas Project,
Yibal, Oman

Zuluf Field Expansion Project

Zuluf Field Expansion Project,
Arabian Gulf, Offshore Saudi Arabia (KSA)

Abu Dhabi Gas Distribution Network Pipeline Project

Abu Dhabi Gas Distribution Network Pipeline Project,
Abu Dhabi, United Arab Emirates (UAE)

Bul Hanine Redevelopment

Bul Hanine Redevelopment,
Qatari Coastline, Qatar


ASTM A694 F60 Carbon Steel SWRF Flanges & ASTM A694 F60 Flanges stockholder, High Yield Carbon Steel F60 Forged Flanges wholesaler, Looking for most reliable & oldest A694 Carbon Steel Gr F60 Threaded Flanges manufacturer in India? Buy directly from Grade F60 Flat Flanges manufacturers in Mumbai.

Traders Of Carbon Steel F60 Nippo Flanges, Dealer Of A694 CS Gr F60 Weld Neck Flanges. Grade F60 Carbon Steel Body Flanges/ ASTM A694 F60 Flanges manufacturers in India. EIL approved exporter of Grade F60 Steel RTJ Flanges, BLRF Flange ASTM A694 F60 stockist, An attractive price for bulk Carbon Steel ASME SA694 F60 Paddle Blank Flanges for piping connection.

We have our Manufacturing Unit and Dealers in Gujarat, Ahmedabad, Pune, Chennai, Indore, Kolkata, Delhi, Nagpur, ASTM A694 F60 Flanges for Bhosari, Bangalore, Punjab, Ludhiana, Gurgaon, Rajkot, Karnataka, Uttar Pradesh, Faridabad, Khopoli, Madhya Pradesh, Jaipur, Ghaziabad, Haryana, Vadodara, West Bengal, Rajasthan, Raipur, Aurangabad, Kolhapur, Chhattisgarh, Tamil Nadu, Karnataka. We are Manufacturer and Exporter of Carbon Steel F60 Plate Flanges, Grade F60 Steel RTJ Flanges in Mumbai, India. All of our Carbon Steel ASTM A694 Grade F60 Awwa Flanges is made and tried to worldwide guidelines, and specifications as per ASME, ANSI & ASTM, etc.