ASTM A694 F42 Flanges

Check A694 F42 Chemical Composition And Carbon Steel A694 Blind Flange Bolting Length.

ASTM A694 F42 Flanges

ASTM A694 F42 Flanges

Carbon Steel F42 Flanges

Carbon Steel F42 Flanges

A694 F42 RTJ Flanges

A694 F42 RTJ Flanges



How Many Different Type Of A694 F4 In Flanges?

The types can also be different such as the A694 F42 Flanges which have welded necks and the Carbon Steel F42 Slip On Flanges which have raised face weld necks. A694 Gr F42 RTJ Flange is very much corrosion resistant and are strong because it is made out of a mixture of austenitic and ferrite steel properties. Pairs of pressure tapings are machined into the orifice ASTM A694 Gr F42 Lap Joint Flanges. These tapings are machined directly opposite each other, mostly on 2 sides.

ASTM A694 F42 Flanges Used In Applications In Smaller Sizes?

This alloy grade ASTM A694 F42 Flanges produced by us conform to the ASTM specified chemical composition requirements. Additionally due to constant quality checks by our quality control team, we ensur that these ASTM A694 Grade F42 Blind Flanges adhere to the testing parameters and tensile property requirements as well. F42 Threaded Flanges are characteristically used in applications in smaller sizes of high pressured pipes.

Grade F42 Socket Weld Flange Use To Stronger Joint?

The same applies to the ASTM A694 F42 Socket Weld Flanges as well. Even different version is the ASME SA 694 F42 Flanges which are actually a half piece of a flange structure with a bolt holed ring that is attached to the end of a pipe and could be connected to any flange type in a future connection. CS Grade F42 Plate Flange can be used. The sockets used in Steel Grade F42 Flange provide additional cover for the pipes and make the joint stronger. Hub flanges such as Carbon Steel ASTM A694 Grade F42 RTJ Flange come with a hub or weld neck that provides precious alignment with the pipe. A694 Grade F42 Lapped joint Flanges are with a flat face for maximum attachment.

ASTM A694 F42 Flanges


ASTM A694 F42 Specification And Largest A694 F42 Slip On Flanges Manufacturer In India.


ASTM A694 F42 Specification

Material Specification Of : ASTM A694 F42 Flanges
Flanges Standards EN 1092-1, JIS, ASME B16.5, ASME B16.47 type A, UNI, DIN
Pressure Rating Class 150 To Class 2500
High Temperature Above 200°C (400°F) For Class 150 Or Above 400°C (750°F)
Low Temperature Above -29 Degree C (−20°F)
Common Types Of Flanges: Slip On (SORF), Weld Neck (WNRF), Blind (BLRF), Lap Joint (Loose), Threaded (NPT), Socket-Weld (SWRF)
Special Types Of Flanges : Nipoflange, Elboflange, Latroflange, Swivel Flange, Expanding Flange, Reducing Flange, Weldoflange
Standard Cover : pressure ratings & temperature ratings, materials, marking, dimensions, weight, tolerances, testing
Contact Faces RTJ (Ring Type Joint), FF (Flat Face), RF (Raised Face), T/G (Tongue And Groove ), M/F (Male And Female)
Size Chart Normal Pipe Size 1/2 to NPS 24"
Thickness Normal Pipe Size ≤ 18
Bore Diameter Normal Pipe ≤ 10
Marking Standard Name of Manufacturer
Schedule
Type of Flange Facing
Nominal Pipe Size
Pressure Class
ASME B16 Designation
Bolt Type high strength bolts
medium strength bolts
low strength bolts
European Standard Flanges JIS B2220 Flanges (5k to 30k) and KS1503 flanges
Russian-Standard Flanges GOST 12820 / 12821-80, DIN, UNI, EN 1092-1
South African Standard Flanges SANSflanges And SABS flanges
Surface Finish smooth, concentric serrated, stock
Gaskets Types Full Face Gasket
Flat Ring Gasket
Metallic Ring Gakset
Advantages Of Pipe Flange Used to Connect Pipe System
Easy Repair Pipe System
Assembled Without Welding

Refer A694 F42 Equivalent And Tolerance Chart Of ASTM A694 Grade F42 Weld Neck Flanges.


A694 F42 Chemical Requirements

Gr. C Mn P S Si
ASTM A694 F42 Flanges 0.26-0.265 1.60-1.64 0.025-0.030 0.025-0.030 0.15-0.35

ASTM A694 F42 Flanges Mechanical Properties

Element Tensile Strength Yield Strength (0.2%Offset) Elongation
ASTM A694 F42 Flanges 415 290 20 %

Norma A694 F42 Properties

General

P Density 7.8 - 7.9 g/cm³ at 20 °C Typical for Low Temperature Carbon Steel

A694 F42 Thermal Properties

thermal expansion Coefficient 1.32E-5 - 1.38E-5 1/K at 20 °C Typical for Low Temperature Carbon Steel
Maximum service tem. 500 °C Typical for Temperature Carbon Steel
Melting point 1480 - 1526 °C Typical for Low Temperature Carbon Steel

Carbon Steel F42 Flanges Magnetic Properties

Curie tem. 770 °C at 20 °C Typical for Low Temperature Carbon Steel

ASTM A694 F42 Flanges Tensile Table

Grade Yield Strength (0.2 % Offset), minimum, ksi [MPa] Tensile Strength, minimum, ksi [MPa] Elongation in 2 in. or 50 mm, minimum %
ASTM A694 F42 Flanges 42 [290] 60 [415] 20

Standard Dimensions Of SA694 F4

Standard Dimensions Of SA694 F4


NPS O.D. of Flange Flanges Thickness Diameter of RF Diameter of Hub at Base Lengtd Tdru Hub Bore or Diameter Dia. of Hub at Bevel Radius of Fillet Deptd of Socket
Welding (WN) Neck Slip-On (SORF) Threaded (NPT) Socket (SWRF) Lap Joint (Loose) Slip-on (SORF) Socket (SWRF) Lap Joint (Loose)
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2

ASTM A694 F42 Carbon Steel Flanges Schedule Chart

Nominal Pipe Sizes (NPS) Slip On (SORF) Threaded (NPT) Socket Weld (SWRF) Lap Joint (Loose) Blind (BLRF) Weld Neck (WRNR)
½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
3 3 3 3 4 4
2 5 5 5 5 5 6
8 8 8 8 7 10
3 9 9 9 9 9 11.5
11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268

SA 694 F42 RTJ Flanges Thickness Calculation For Pressure Vessel And High Yield Carbon Steel F42 Flange Temperature Ratings.

F42 RTJ Flanges Pressure Rating Chart

ASTM A694 F42 Flanges Pressure Rating Chart
Temperature °F 150# 300# 400# 600# 900# 1500# 2500#
-20 to 100 275 720 960 1440 2160 3600 6000
200 230 600 800 1200 1800 3000 5000
300 205 540 720 1080 1620 2700 4500
400 190 495 660 995 1490 2485 4140
500 170 465 620 930 1395 2330 3880
600 140 435 580 875 1310 2185 3640
650 125 430 575 860 1290 2150 3580
700 110 425 565 850 1275 2125 3540
750 95 415 555 830 1245 2075 3460
800 80 405 540 805 1210 2015 3360
850 65 395 530 790 1190 1980 3300
900 50 390 520 780 1165 1945 3240
950 35 380 510 765 1145 1910 3180
1000 20 320 430 640 965 1605 2675
1050 20 310 410 615 925 1545 2570
1100 20 255 345 515 770 1285 2145
1150 20 200 265 400 595 995 1655
1200 20 155 205 310 465 770 1285
1250 20 115 150 225 340 565 945
1300 20 85 115 170 255 430 715
1350 20 60 80 125 185 310 515
1400 20 50 65 95 145 240 400
1450 15 35 45 70 105 170 285
1500 10 25 35 55 80 135 230

Grade F42 Socket Weld Flange Weight Chart According to ASME B16.5 And ASTM A694 F42 Carbon Steel Flanges Dimensional Formula.

High Yield F42 Blind Flange Thickness

ASTM A694 F42 Flanges Wall Thickness
NPS (Normal Pipe Sizes) Outside Daimeter (O.D.) Schedule 10 Schedule 20 Schedule 30 STD Wall Schedule 40 Schedule 60 EXT Hvy Schedule 80 Schedule 100 Schedule 120 Schedule 140 Schedule 160 XX Hvy
½ 0.84 0.083 ... ... 0.109 0.109 ... 0.147 0.147 ... ... ... 0.188 0.294
¾ 1.05 0.083 ... ... 0.113 0.113 ... 0.154 0.154 ... ... ... 0.219 0.308
1 1.315 0.109 ... ... 0.133 0.133 ... 0.179 0.179 ... ... ... 0.25 0.358
1 ¼ 1.66 0.109 ... ... 0.14 0.14 ... 0.191 0.191 ... ... ... 0.25 0.382
1 ½ 1.9 0.109 ... ... 0.145 0.145 ... 0.2 0.2 ... ... ... 0.281 0.4
2 2.375 0.109 ... ... 0.154 0.154 ... 0.218 0.218 ... ... ... 0.344 0.436
2 ½ 2.875 0.12 ... ... 0.203 0.203 ... 0.276 0.276 ... ... ... 0.375 0.552
3 3.5 0.12 ... ... 0.216 0.216 ... 0.3 0.3 ... ... ... 0.438 0.6
3 ½ 4 0.12 ... ... 0.226 0.226 ... 0.318 0.318 ... ... ... ... 0.636
4 4.5 0.12 ... ... 0.237 0.237 ... 0.337 0.337 ... 0.438 ... 0.531 0.674
5 5.563 0.134 ... ... 0.258 0.258 ... 0.375 0.375 ... 0.5 ... 0.625 0.75
6 6.625 0.134 ... ... 0.28 0.28 ... 0.432 0.432 ... 0.562 ... 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 ...
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 ...
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 ...
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 ...
22 22 0.25 ... ... 0.375 ... ... 0.5 ... ... .... .... .... ....
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 ....
26 26 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
30 30 0.312 0.5 0.625 0.375 .... .... 0.5 .... .... .... .... .... ....
36 36 0.312 0.5 0.625 0.375 0.75 .... 0.5 .... .... .... .... .... ....
40 40 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
42 42 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..
48 48 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..

ASTM A694 Grade F42 Bolt Chart

Class 150 Flanges Class 300 Flanges Class 600 Flanges
NPS # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length
1/16 RF RTJ 1/16 RF RTJ 1/4 RF RTJ
1/2 4 0.50 2-1/4 4 0.50 2-1/2 3 4 0.50 3 3
3/4 4 0.50 2-1/2 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1 4 0.50 2-1/2 3 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1-1/4 4 0.50 2-3/4 3-1/4 4 0.63 3-1/4 3-3/4 4 0.63 3-3/4 3-3/4
1-1/2 4 0.50 2-3/4 3-1/4 4 0.75 3-1/2 4 4 0.75 4-1/4 4-1/4
2 4 0.63 3-1/4 3-3/4 8 0.63 3-1/2 4 8 0.63 4-1/4 4-1/4
2-1/2 4 0.63 3-1/2 4 8 0.75 4 4-1/2 8 0.75 4-3/4 4-3/4
3 4 0.63 3-1/2 4 8 0.75 4-1/4 4-3/4 8 0.75 5 5
3-1/2 8 0.63 3-1/2 4 8 0.75 4-1/4 5 8 0.88 5-1/2 5-1/2
4 8 0.63 3-1/2 4 8 0.75 4-1/2 5 8 0.88 5-3/4 5-3/4
5 8 0.75 3-3/4 4-1/4 8 0.75 4-3/4 5-1/4 8 1.00 6-1/2 6-1/2
6 8 0.75 4 4-1/2 12 0.75 4-3/4 5-1/2 12 1.00 6-3/4 6-3/4
8 8 0.75 4-1/4 4-3/4 12 0.88 5-1/2 6 12 1.13 7-1/2 7-3/4
10 12 0.88 4-1/2 5 16 1.00 6-1/4 6-3/4 16 1.25 8-1/2 8-1/2
12 12 0.88 4-3/4 5-1/4 16 1.13 6-3/4 7-1/4 20 1.25 8-3/4 8-3/4
14 12 1.00 5-1/4 5-3/4 20 1.13 7 7-1/2 20 1.38 9-1/4 9-1/4
16 16 1.00 5-1/4 5-3/4 20 1.25 7-1/2 8 20 1.50 10 10
18 16 1.13 5-3/4 6-1/4 24 1.25 7-3/4 8-1/4 20 1.63 10-3/4 10-3/4
20 20 1.13 6-1/4 6-3/4 24 1.25 8 8-3/4 24 1.63 11-1/4 11-1/2
24 20 1.25 6-3/4 7-1/4 24 1.50 9 10 24 1.88 13 13-1/4

Best Deals On Bulk Types Of ASTM A694 F42 Flanges

40 Inch, Class 150, Raised Face, BS 3293, ASME SA 694 F42 Threaded Flanges

40 Inch, Class 150, Raised Face, BS 3293, ASME SA 694 F42 Threaded Flange

36 Inch, 150#, BS 3293, Raised Face, Carbon Steel A694 Grade F42 Lap Joint Flanges

36 Inch, 150#, BS 3293, Raised Face, Carbon Steel A694 Grade F42 Lap Joint Flange

3 Inch, 300#, RF, High Yield Carbon Steel F42 Long Weld Neck Flanges

3 Inch, 300#, RF, High Yield Carbon Steel F42 Long Weld Neck Flanges

12 Inch, 150 LB, Carbon Steel F42 Spectacle Blind Flanges

12 Inch, 150 LB, Carbon Steel F42 Spectacle Blind Flange

6 Inch, 150 LB, ASME B16.5, ASTM A694 Gr F42 Slip On Flanges

6 Inch, 150 LB, ASME B16.5, ASTM A694 Gr F42 Slip On Flange

8 Inch, SCH 80, ASTM A694 F42 Socket Weld Flanges

8 Inch, SCH 80, ASTM A694 F42 Socket Weld Flange

 EN1092-1, PN16, DN200, A694 F42 Blind Flanges

EN1092-1, PN16, DN200, A694 F42 Blind Flanges

6 Inch, Class 120, EN1092-1 Type 01, SA 694 F42 Weld Neck Flanges

6 Inch, Class 120, EN1092-1 Type 01, SA 694 F42 Weld Neck Flange

28 Inch, Class 150, RF, ASME B16.47, ASTM A694 F42 Steel Forged Flanges

28 Inch, Class 150, RF, ASME B16.47, ASTM A694 F42 Steel Forged Flanges

10 Inch, Class 300, SCH STD, Grade F42 Raised Face Flanges

10 Inch, Class 300, SCH STD, Grade F42 Raised Face Flange

12 Inch, Black Coating, 300LB, Norma A694 F42 Male and Female Flange

12 Inch, Black Coating, 300LB, Norma A694 F42 Male and Female Flange

ASTM A694 Gr F42 Steel Bleed Ring

2 Inch, 150LB, SCH 80, RF, ASTM A694 Gr F42 Steel Bleed Ring

Steel Grade F42 Plate Flanges

2 Inch, SCH 40, Class 150, RF, Steel Grade F42 Plate Flange

1 Inch, SCH 40, Class 300, RF Ends, Carbon Steel A694 F42 Ring Type Joint Flange

1 Inch, SCH 40, Class 300, RF Ends, Carbon Steel A694 F42 Ring Type Joint Flange

2 1/2 Inch, 150#, FF, Carbon Steel F42 Tongue & Groove Flanges

2 1/2 Inch, 150#, FF, Carbon Steel F42 Tongue & Groove Flange

16 Inch, Class 900, ASTM A694 Gr F42 Reducing Flanges

16 Inch, Class 900, ASTM A694 Gr F42 Reducing Flange


We Supplied A Comprehensive Range Of ASTM A694 F42 Flanges To The Following Countries

ASTM A694 F42 Flanges United Arab Emirates (UAE), Norway, Malaysia, Turkey
ASTM A694 Gr F42 Pipe Flanges Dammam -KSA, Indonesia, Belgium, Philippines.
A694 F42 WNRF Flanges Canada, Singapore, Malaysia, Philippines
SA 694 F42 Slip On Flanges Japan, Europe, Romania, Malaysia
ASTM A694 F42 Steel Blind Flanges Colombia, Malaysia, Sweden, China
Carbon Steel A694 Grade F42 Threaded Flanges Dubai, Netherlands, Russia, Malaysia
High Yield Carbon Steel F42 Forged Flanges South Africa, Saudi Arabia (KSA), Kuwait, Brazil
Carbon Steel F42 Plate Flanges Philippines, Nigeria, Australia, UK
F42 Carbon Steel Orifice Flanges Oman, Malaysia, Hong Kong, UAE
A694 Grade F42 Loose Flanges South Africa, Bahrain, Singapore
Steel Grade F42 Square Flanges France, Thailand, Europe, Qatar
ASTM A694 Grade F42 Ring Type Joint Flanges Germany, Czechia, Malaysia, Thailand
ASTM A694 Carbon Steel F42 Paddle Spacer Flanges Finland, Malaysia, USA, Bangladesh
Carbon Steel A694 Gr F42 Blind Flanges Italy, Iran, Chile, Singapore
Carbon Steel Grade F42 Lap Joint Flanges Egypt, Spain, UK, Mexico


About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy