Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

Stainless Steel 316 Pipe Fittings

Sabic Approved Manufacturer of ASTM A403 WP316 Buttweld Pipe Fittings In Mumbai, India, Suppliers Of ANSI B16.9 SA403 WP316 Elbow.

Largest Supplier Of Small-Quantity Of Stainless Steel 316 Seamless Pipe Fittings, Get ASTM A403 WP316 Fittings at Affordable Price in Mumbai, Check MSS SP-79 SS UNS S31600 Buttweld Fittings weight chart.

ASTM A403 WP316 Fittings are a grade of pipe fittings that are made up of a high oxidation resistant material. This material is also corrosion resistive, pitting resistive and can withstand strong chemicals and acids. The high temperature and pressure tolerance of this material makes the A403 WP316 Elbow to perform better under the corrosive high pressure curvatures of piping. The corrosion in fluid direction changing joints is high. Due to the impact of the fluid flow, the fitting might break if there was corrosion and or thermal expansion.


ASTM A403 WP316 Fittings Manufacturers in India

ASTM A403 WP316 Fittings Manufacturers in India

Stainless Steel 316 Pipe Fittings

Stainless Steel 316 Pipe Fittings

SA403 WP316 Elbow

SA403 WP316 Elbow

We Are one of the top ASTM A403 Gr WP316 Elbow Manufacturer In India, Buy A403 WP316 Pipe Fittings At Factory Price, Exporters Of SA 403 WP316 Butt weld Pipe Fittings, Welcome to the largest supplier of 1.4436 SS 316 Buttweld Pipe Fittings In Mumbai.

The ASTM A403 gr WP316 is one of the most used form of the austenitic steel in the piping world. ASTM A403 gr WP316 has slightly less corrosion resistant properties than the A403 WP316 material. But both could be used interchangeably in most conditions except where the requirement mandated one over the other. The 316 Pipe Fittings come in different shapes and standards. They could either be seamless or buttwelded. The A403 Grade WP316 Buttweld Fittings are much stronger due to the reason that they are heat treated after buttweldiing and can last longer than most other 316 Stainless Steel Fittings. The applications of the SS 316 Fitting types vary such as the elbows, bends, tees, valves, adapters and much more. The most used 316 SS Weld Fittings are of smaller pipe sizes. The ASTM A403 WP316 Fittings could be used with low cost, low pressure applications where the corrosion resistance or pressure containment is less required. The A403 WP316 Elbow would perform under high temperatures but only with a moderate corrosion resistance.


What is ASTM A403 WP316?


ASTM A403 WP316 Stainless Steel Fittings

A403 WP316 material is used mostly in the domestic applications. The 316 Pipe Fittings could be used in commercial and industrial applications. Where the strength is more important than the corrosion resistance, the A403 Grade WP316 Buttweld Fittings could be used. The strength of the 316 Stainless Steel Fittings could be increased through cold working. The SS 316 Fitting can exhibit high strength, durability and weldability. Where, the cost is the major concern, the 316 SS Weld Fittings provide considerable cost cutting over high end alloy materials.


ASTM A403 gr WP316 Fittings Price List In India


S. No. CAT Description PRICE IN US($)
1. ELBOW 20 DEG Stainless Steel, ASTM A403 Gr.WP316, 20° Elbow, SR, BW, ANSI/ ASME B16.9 $9.50
2. ELBOW 30 DEG Stainless Steel, ASTM A403 Gr.WP316, 30° Elbow, SR, Buttweld, ANSI/ ASME B16.9 $14.80
3. ELBOW 45 DEG Stainless Steel, ASTM A403 Gr.WP316, 45° Elbow, BW, ANSI/ ASME B16.9 $8.50
4. ELBOW 45 DEG Stainless Steel, ASTM A403 Gr.WP316, 45° Elbow, BW, Short Radius, ANSI/ ASME B16.9 $16.44
5. ELBOW 45 DEG Stainless Steel, ASTM A403 Gr.WP316, 45° Elbow, BW, ANSI/ ASME B16.9 $19.45
6. ELBOW 90 DEG Stainless Steel, ASTM A403 Gr.WP316, 90° Elbow, SR, BW, ANSI/ ASME B16.9 $12.35
7. ELBOW 90 DEG Stainless Steel, ASTM A403 Gr.WP316, 90° Elbow, SR, BW, ANSI/ ASME B16.9 $8.70
8. ELBOW 180 DEG Stainless Steel, ASTM A403 Gr.WP316, 180° Elbow, SR, BW, ANSI/ ASME B16.9 $27.40
9. ELBOW 90 DEG Stainless Steel, ASTM A403 Gr.WP316, 90° Elbow, Long Radius Elbow, BW, ANSI/ ASME B16.9 $6.30
10. ELBOW 60 DEG Stainless Steel, ASTM A403 Gr.WP316, 60° Elbow, SR, BW, ANSI/ ASME B16.9 $14.80

Please note this is an approx Price of ASTM A403 WP316 Buttweld Pipe Fittings in India. For final Stainless Steel 316 Pipe Fittings Price List Please Call on 91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.


A403 WP316 Material Specification


A403 Grade WP316 Pipe Fittings
A403 316 Stainless Steel
Buttweld(B/W) Fittings Materials
Size
(in mm)
Sch.& Swg SS Fittings Specification SS Pipe Fittings Items
A403 316 Stainless Steel
Seamless Fittings
15 NB
to
300 NB
Sch.5
to
Sch.XXs
A403 B/W
ANSI B16.9
A403 WP316 Long Joint Stubend
R=2D, 3D, 10D Etc
A403 WP316 Elbow( 180°, 90°, 45°)
A403 WP316 (Equal & Unequal)
A403 WP316 Reducer(con & Ecc)
CAP A403 WP316 Stubend (Long & Short)
A403 WP316 Nipple (Barrel)
A403 316 Stainless Steel Welded
[ERW} Fittings
15 NB
to
600 NB
Sch.5
to
Sch.80s
A403 B/W
ANSI B16.9

Specifications ASTM A403, ASME SA403
A403 WP316 material Types Seamless / ERW / Welded / Fabricated Pipe Fittings
316 Pipe Fittings Size Range ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
A403 Grade WP316 Buttweld FittingsType DN15-DN1200
316 Pipe Fittings Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Pipe Fittings
Specialized manufacturer of 316 Stainless Steel Fittings ASTM A403 Wp316 90º Elbows, ASTM A403 Gr Wp316 45º Elbows, ASTM Wp316 Tees, ASTM A403 Gr Wp316 Crosses, ASTM A403 Wp316 Reducers, ASTM Wp316 Pipe Cap, ASTM A403 Gr Wp316 Stub End, ASTM A403 Wp316 Pipe Bend
A403 Grade WP316 Buttweld Fittings Connection Welding
Key markets and industries for A403 WP316 Elbow
  • Bitumen upgraders.
  • Petrochemicals and acids.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
ASTM A403 WP316 Fittings Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
A403 WP316 Elbow size Seamless Butt Weld Fittings: 1/2" - 10"
Welded Butt Weld Fittings: 1/2" - 48"
ASTM A403 gr WP316 Thickness SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
ASTM A403 gr WP316 Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
SS 316 Fitting Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D.
Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO
Manufacturing process of 316 SS Weld Fittings Push, Press, Forge, Cast, etc.
Origin & Mills Of ASTM A403 WP316 Fittings Japanese, Indian, USA, Korean, European, Ukraine, Russian
Application
  • A403 WP316 material To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
  • Schedule 10 fittings are an economical alternative for lower-pressure applications.
  • Schedule 40 fittings have a thicker wall for higher-pressure applications.
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Prestige quality ASTM A403 WP316 Buttweld Pipe Fittings manufacturers in India offer these SS 316 Fitting And 316 SS Weld Fittingsin EN, DIN, ISO, BS, JIS or ANSI standard.


Grade specifications for ASTM A403 WP316 Fittings:


GRADE UNS
NO
OLD BRITISH EURONORM SWEDISH
SS
JAPANESE
JIS
BS EN NO NAME
316 S31600 316S31 58H, 58J 1.4401 X5CrNiMo17-12-2 2347 SUS 316
316 S31603 316S11 1.4404 X2CrNiMo17-12-2 2348 SUS 316
316H S31609 316S51

Note: These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.


Stainless Steel [SS] 316 H/L/N/LN
AISI 316/316H/316/316N/316N
UNS S31600/S31609/S31603/S31651/S31653
Werkstoff Nr. 1.4301/1.4306/1.4948/1.4311

Types Of ASTM A403 WP316 Fittings


ASTM SS 316 Long Radius Elbow

ASTM SS 316 Long Radius Elbow

ASTM A403 316 Buttweld WP316 Tee

ASTM A403 316 Buttweld WP316 Tee

ASTM 403 WP 316 Long Stub End

ASTM 403 WP 316 Long Stub End

ASTM Grade 316 Concentric Reducer

ASTM Grade 316 Concentric Reducer

ASTM A403 WP316 Unequal Tee

ASTM A403 WP316 Unequal Tee

ASTM A403 WP316 Cross

ASTM A403 WP316 Cross

Stainless Steel 316 Pipe Cap

Stainless Steel 316 Pipe Cap

ASME SA403 WP316 Bend

ASME SA403 WP316 Bend

Material SS 1.4436 180 Degree Elbows

Material SS 1.4436 180 Degree Elbows

SS 316 90 Degree Elbows

SS 316 90 Degree Elbows

Werkstoff No 1.4436 Short Radius Elbow

Werkstoff No 1.4436 Short Radius Elbow

SS Grade 316 Short Stub End

SS Grade 316 Short Stub End

ASTM A403 SS 316 BW 45 Degree Elbows

ASTM A403 SS 316 BW 45 Degree Elbows

Stainless Steel UNS S31600 End Cap

Stainless Steel UNS S31600 End Cap

SA 403 Grade WP316 Lateral Tee

SA 403 Grade WP316 Lateral Tee

AISI 316 SS Reducer

AISI 316 SS Reducer

Rajtilak Metal is an ISO certified ASTM A403 WP316 Stainless Steel Fittings manufacturers & SS UNS S31600 Buttweld Fittings distributor in India


Stainless Steel Tradename UNS no. Werkstoff No. Density (g/cm3)
A403 WP316 Stainless Steel Fittings A403 WP316 Stainless S31600 1.4401 8.00
A403 WP316 Fittings A403 WP316 Stainless S31603 1.4404 8.00
AA403 Grade WP316H Buttweld Fittings A403 WP316H Stainless S31609 1.4919 8.00
A403 WP316Ti Stainless Steel Fittings A403 WP 316Ti Stainless S31635 1.4571 8.00

316 Stainless Steel Welded Pipe Fittings & Grade 316 Stainless Steel Elbow Fittings Useful Information For Buyers

ASTM A403 WP316 Fittings Chemical Composition


% 316 316 316H 316Ti
C 0.0-0.07 0.0-0.03 0.04-0.08 0.0- 0.08
Mn 0.0-2.0 0-2.0 0.0-2.00 0.0-2.00
Si 0.0-1.0 0.0-1.00 0.0-1.00 0.0- 1.00
P 0.0-0.05 0.0-0.05 0-0.04 0.0-0.05
S 0.0-0.02 0.0-0.02 0.0-0.02 0.0-0.03
Cr 16.50-18.50 16.50-18.50 16.50-18.50 16.50- 18.50
Mo 2.00-2.50 2.00-2.50 2.00-2.50 2.00- 2.50
Ni 10.00-13.00 10.00-13.00 10.00-13.00 10.50- 14.00
Ti - - - 0.40- 0.70
Fe balance balance balance balance

ASTM A403 WP316 Mechanical Properties


Typical Values at 68°F (20°C)

Grade Tensile Str
(MPa) min
Yield Str
0.2% Proof
(MPa) min
Elong
(% in 50mm) min
Hardness
Rockwell B (HR B) max Brinell (HB) max
316 515 205 40 95 217
316 485 170 40 95 217
316H 515 205 40 95 217

ASTM A403 Gr WP316 Physical Properties


Grade Density
(kg/m3)
Elastic Modulus
(GPa)
Mean Co-eff of Thermal Expansion (µm/m/°C) Thermal Conductivity
(W/m.K)
Specific Heat 0-100°C
(J/kg.K)
Elec Resistivity
(nΩ.m)
0-100°C 0-315°C 0-538°C At 100°C At 500°C
ASTM A403 WP316 Pipe Fittings/
ASTM A403 gr WP316/
ASTM A403 WP316H Fittings
8000 193 15.9 16.2 17.5 16.3 21.5 500 740

  • Thermal conductivity: 16.2 W/m-k (100°C)
  • Modulus of Elasticity (MPa): 193 x 103 in tension
  • Melting Range: 2500-2550°F (1371-1399°C)
  • Density: 0.799g/cm3
  • Electrical resistivity: 74 microhm-cm (20C)
  • Specific Heat: 0.50 kJ/kg-K (0-100°C)

Equivalent Grades for A403 WP316 Elbow


STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
ASTM A403 SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
ASTM A403 SS 316 1.4404 / 1.4435 S31603 SUS 316 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3
ASTM A403 SS 316H 1.4401 S31609
ASTM A403 SS 316Ti 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2

Different Between A403 WP 316 & A403 WP304L


  • ASTM A403 WP316 Fittings are a grade of pipe fittings that are made up of a high oxidation resistant material. This material is also corrosion resistive, pitting resistive and can withstand strong chemicals and acids.
  • ASTM A403 WP304L Fittings are pipe fittings made for austenitic stainless steel applications with forged material. These are commonly used for pressure piping that could withstand high pressure stress condition.


316 Pipe Fittings Dimensions


316 Pipe Fittings Dimensions


ASTM A403 WP316 Fittings Weight Chart


Product Range And Theoretical Weights(Kg)
DN Schedule 10s Schedule 40s Schedule 80s
90°
Elbow
45°
Elbow
Equal
Tee
90°
Elbow
45°
Elbow
Equal
Tee
90°
Elbow
45°
Elbow
Equal
Tee
8 0.02 0.01 0.03 0.03 0.02 0.06 0.04 0.03 0.07
10 0.03 0.02 0.05 0.03 0.02 0.03 0.06 0.04 0.09
15 0.06 0.03 0.09 0.08 0.04 0.10 0.10 0.05 0.14
20 0.07 0.03 0.13 0.08 0.04 0.17 0.11 0.05 0.20
25 0.14 0.08 0.28 0.15 0.11 0.29 0.22 0.14 0.38
32 0.23 0.11 0.49 0.26 0.17 0.59 0.40 0.23 0.68
40 0.30 0.17 0.68 0.40 0.23 0.86 0.51 0.29 1.02
50 0.50 0.25 0.85 0.70 0.40 1.28 0.91 0.59 1.59
65 0.85 0.48 1.41 1.40 0.77 2.19 1.81 0.99 3.13
80 1.25 0.63 1.77 2.20 1.08 3.31 2.97 1.50 4.45
90 1.70 0.75 2.67 2.83 1.42 4.08 4.00 2.00 5.44
100 2.10 1.08 3.46 4.47 2.09 5.27 6.18 2.81 7.71
150 5.45 2.72 8.07 10.89 5.44 10.99 16.32 8.16 13.16
200 10.20 5.33 15.65 21.54 10.77 20.91 33.11 16.56 28.12
250 18.15 9.75 26.46 38.56 19.27 35.38 51.71 25.86 49.90
300 25.80 13.62 39.46 59.42 29.71 62.14 79.38 39.69 83.91

Product Range And Theoretical Weights(Kg)
DN Schedule 10s Schedule 40s Schedule 80s
Con
Reducer
Ecc
Reducer
Reducing
Tee
Con
Reducer
Ecc
Reducer
Reducing
Tee
Con
Reducer
Ecc
Reducer
Reducing
Tee
40x25 0.19 0.19 0.60 0.26 0.26 0.76 0.34 0.34 0.90
50x25 0.28 0.28 0.73 0.40 0.40 1.10 0.54 0.54 1.37
50x40 0.31 0.31 0.76 0.45 0.45 1.15 0.59 0.59 1.43
80x50 0.55 0.55 1.56 1.00 1.00 2.91 1.79 1.79 3.91
100x50 0.78 0.78 2.94 1.50 1.50 4.48 1.95 1.95 6.55
100x80 0.87 0.87 3.04 1.74 1.74 4.64 2.33 2.33 6.79
150x80 1.82 1.82 6.86 3.95 3.95 9.68 5.51 5.51 11.57
150x100 1.96 1.96 7.10 4.07 4.07 11.94 5.96 5.96 11.97
200x100 3.01 3.01 13.46 6.55 6.55 17.98 9.23 9.23 24.18
200x150 3.19 3.19 14.08 6.74 6.74 18.82 10.12 10.12 25.31

We Supplied A Comprehensive Range Of Stainless Steel 316 Pipe Fittings To The Following Locations


AWWA C208, DN1400×1400, Stainless Steel 316 Fittings United Arab Emirates (UAE), Norway, Malaysia, Turkey
Schedule 10S, ASME B16.9, 8 Inch, SA403 WP316 Elbow Dammam -KSA, Indonesia, Belgium, Philippines.
Schedule 80, ASTM A403, 3 X 2 Inch, UNS S31600 BW Fittings Canada, Singapore, Malaysia, Philippines
ASME B16.9, 10 Inch, SCH 20S, ASTM A403 WP316 Fittings Japan, Europe, Romania, Malaysia
MSS SP-43, 6 Inch, SCH 40S, A403 WP316 Tee Colombia, Malaysia, Sweden, China
SMLS, Beveled End, 16 Inch, SCH 70S, SS 316 Fittings Dubai, Netherlands, Russia, Malaysia
SCH 100S, 1 1/2 Inch, RF, 316 Stainless Steel Fittings South Africa, Saudi Arabia (KSA), Kuwait, Brazil
16 Inch, Buttweld, SCH 30S,WNR 1.4436 Reducing Tee Philippines, Nigeria, Australia, UK
SCH40, 14 Inch, Seamless, Stainless Steel 316 Buttweld Fittings Oman, Malaysia, Hong Kong, UAE
Beveled End, 2 Inch, SCH 90S, 316 SS Pipe Elbow South Africa, Bahrain, Singapore
6 x 4 Inch, BW, ASME B16.9, Stainless Steel 316 Seamless Fittings France, Thailand, Europe, Qatar
ANSI B16.9 BW, 8 x 4 Inch, SCH 100, ASTM A403 Gr WP316 Elbow Germany, Czechia, Malaysia, Thailand
SCH 40, 8 × 4 Inch, BW, SA 403 WP316 Fittings Finland, Malaysia, USA, Bangladesh
SCH 40, 3 Inch, ASTM 403 Wp 316 Pipe Welded Fittings Italy, Iran, Chile, Singapore
SCH 40, BW, 6 × 3 Inch, ASME B16.9, SS Grade 316 Fittings Egypt, Spain, UK, Mexico
1/2 inch, SMLS, SCH5, ASTM A403 316 Seamless Pipe Fittings Ellington -United States, Poland, Canada, UK
4 Inch, buttweld, 316 SS Pipe Cap United Kingdom -UK, Europe, UAE, Malaysia