Stainless Steel 316L Pipe Fittings

ISO Approved UNS S31603 Elbow/ Tee and Stainless Steel 316L Buttweld Fittings manufacturer in India.

Stainless Steel 316l Pipe Fittings

Stainless Steel 316l Pipe Fittings

Stainless Steel 316l Buttweld Fittings

Stainless Steel 316l Buttweld Fittings

ASTM A403 WP316L Pipe Fittings

ASTM A403 WP316L Pipe Fittings



What Is Stainless Steel 316L Pipe Fittings?

The applications of the Stainless Steel 316L Pipe Fittings types vary such as the elbows, bends, tees, valves, adapters and much more. The most used SS 316L Fittings are of smaller pipe sizes. The ASTM A403 WP316L Pipe Fittings could be used with low cost, low pressure applications where the corrosion resistance or pressure containment is less required. The A403 WP316L Elbow would perform under high temperatures but only with a moderate corrosion resistance.

SS 316L Fittings Price List
Type Of Fittings Size Schedule Material Price In India (INR)
90 Deg Elbow STD 2" Schedule 40 A403 WP316L 748.00
90 Deg Elbow STD 2 1/2" Schedule 40 A403 WP316L 890.00
90 Deg Elbow STD 3" Schedule 80 A403 WP316L 1099.00
90 Deg Elbow STD 3 1/2" Schedule 40 A403 WP316L 1265.00
90 Deg Elbow STD 4" Schedule 160 A403 WP316L 1699.99
Reducing Tee 4” X 2” Schedule 40 A403 WP316L 895.00
Reducing Tee 4” X 3” Schedule 80 A403 WP316L 1400.00
Eccentric Reducer STD 3 X 2" Schedule 40 A403 WP316L 1099.00
Eccentric Reducer STD 3 X 2 1/2" Schedule 40 A403 WP316L 1200.00
Eccentric Reducer STD 4 X 1 1/2" Schedule 40 A403 WP316L 1499.00
Eccentric Reducer STD 4 X 2 1/2" Schedule 40 A403 WP316L 1640.00

Please note this is an approx Price of Stainless Steel 316L Pipe Fittings in India. For final SS 316L Pipe Fittings Price List Please Call on 91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.


Check ASTM A403 WP316L Pipe Fittings Mechanical Behavior And Get SS 316L Fittings Price List In India.


ASTM A403 Specification

Specification: Stainless Steel 316L Pipe Fittings
Pressure-Temperature Class 150LB, 300LB, 600LB, 1500LB, 2500LB.
Schedule: Schedule 5 TO Schedule XXS.
Size: Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48”
Standard EN, ISO, DIN, JIS, NPT
Type Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross,
Connection Type Threaded/ Clamp End / End Bell / Weld/ Flange/
Type: Butt Weld (BW), Seamless (SMLS) Welded
Thickness: Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc.
Type Of Dimension: BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313

ASTM A403 Grade WP316l Schedule Chart

ASTM A403 Grade WP316l Schedule Chart

ASTM A403 Grade WP316l Schedule Chart

Standard Dimensions Of SS 316L Buttweld Fittings

NPS O.D. 90 Degree Elbow 45 Degree Elbow 180 Degree Return
(inch) Long Radius Elbow Short Radius Long Radius Elbow Long Radius Elbow
(millimeter) (inch) Center to Face
(inch)
Center to Face
(inch)
Center to Face
(inch)
Radius
(inch)
Center to Center
(inch)
Back to face
(inch)
1/2 21.3 0.840 1 1/2 5/8 2 1 7/8
3/4 26.7 1.050 1 1/8 7/16 2 1/4 1 11/16
1 33.4 1.315 1 1/2 1 7/8 3 2 3/16
1 1/4 42.2 1.660 1 7/8 1 1/4 1 3 3/4 2 3/4
1 1/2 48.3 1.900 2 1/4 1 1/2 1 1/8 3 4 1/2 3 1/4
2 60.3 2.375 3 2 1 3/8 4 6 4 3/16
2 1/2 73.0 2.875 3 3/4 2 1/2 1 3/4 5 7 1/2 5 3/16
3 88.9 3.500 4 1/2 3 2 6 9 6 1/4
3 1/2 101.6 4.000 5 1/4 3 1/2 2 1/4 7 10 1/2 7 1/4
4 114.3 4.500 6 4 2 1/2 8 12 8 1/4
5 141.3 5.563 7 1/2 5 3 1/8 10 15 10 5/16
6 168.3 6.625 9 6 3 3/4 12 18 12 5/16
8 219.1 8.625 12 8 5 12 24 16 5/16
10 273.1 10.750 15 10 6 1/4 15 30 20 3/8
12 323.9 12.750 18 12 7 1/2 18 36 24 3/8

NPS O.D. Pipe End Caps Straight Tee Straight Cross Long / Short Stub Ends
(inch.) (millimeter) (inch.) Length
(inch.)
Center to End
(inch.)
Center to End
(inch.)
Lap Diameter
(inch.)
Long Length
(inch.)
Short Length
(inch.)
1/2 21.3 0.840 1 1 1 3/8 3 2
3/4 26.7 1.050 1 1 1/8 1 11/16 3 2
1 33.4 1.315 1 1/2 1 1/2 1 1/2 2 4 2
1 1/4 42.2 1.660 1 1/2 1 7/8 1 7/8 2 1/2 4 2
1 1/2 48.3 1.900 1 1/2 2 1/4 2 1/4 2 7/8 4 2
2 60.3 2.375 1 1/2 2 1/2 2 1/2 3 5/8 6 2 1/2
2 1/2 73.0 2.875 1 1/2 3 3 4 1/8 6 2 1/2
3 88.9 3.500 2 3 3/8 3 3/8 5 6 2 1/2
3 1/2 101.6 4.000 2 1/2 3 3/4 3 3/4 5 1/2 6 3
4 114.3 4.500 2 1/2 4 1/8 4 1/8 6 3/16 6 3
5 141.3 5.563 3 4 7/8 4 7/8 7 5/16 8 3
6 168.3 6.625 3 1/2 5 5/8 5 5/8 8 1/2 8 3 1/2
8 219.1 8.625 4 7 7 10 5/8 8 4
10 273.1 10.750 5 8 1/2 8 1/2 12 3/4 10 5
12 323.9 12.750 6 10 10 15 10 6

Fast Delivery On Stainless Steel 316L Seamless/Welded Fittings And Refer A403 WP316L Elbow Specification Format.


Stainless Steel 316 Fittings Pressure Rating List

Pressure-Temperature ratings for Stainless Steel 316L Pipe Fittings (psig)
Temperature RatingsPressure Class
150300
1/4 - 1 inch.1 1/4 - 2 inch.2 1/2 - 3 inch.
(oF)(oC)
-20 to 150 -29 to 66 300 2000 1500 1000
200 93 265 1785 1350 910
250 121 225 1575 1200 825
300 149 185 1360 1050 735
350 177 150 1150 900 650
400 204 - 935 750 560
450 232 - 725 600 475
500 260 - 510 450 385
550 288 - 300 300 300

View Also ASTM A403 WP316L Chemical Composition And 316L SS Fittings Temperature Ratings/Minimum Weight.

ASTM A403 WP316L Pipe Fittings Tolerance Table

Stainless Steel 316L Pipe Fittings Tolerance 90 Degree & 45 Degree
Elbows & Tees
Reducers
& Lap Joint
Stub End
Pipe Caps
ASME B16.9 Buttweld Fitting (Normal Pipe Size) O.
D.
at Bevel
I.
D.
at End
Wall Thick. T Center-to-End
Dimension
A ,C ,B
Over-all
Length H
Over-all
Length F
1/2 to 2-1/2 +0.06 Not less than 87.5%
of nominal thickness
+/- 0.06 +/- 0.06 +/- 0.12
-0.03
3 to 3-1/2 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.12
4 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.12
5 to 8 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.06 +/- 0.25
10 to 18 +0.16 +/- 0.12 +/- 0.09 +/- 0.09 +/- 0.25
-0.12
20 to 24 +0.25 +/- 0.19 +/- 0.09 +/- 0.09 +/- 0.25
-0.19
26 to 30 +0.25 +/- 0.19 +/- 0.12 +/- 0.19 +/- 0.38
-0.19
32 to 48 +0.25 +/- 0.19 +/- 0.19 +/- 0.19 +/- 0.38
-0.19

Dimension Table Of BS 316S11 Reducing Tee, One Of The Oldest SA403 316L Buttweld Pipe Fittings Supplier In India.

316 SS Fittings Gasket Size Chart

NPS Gasket I.D.
Gasket O.D.
Class 150 Class 300 Class 400 Class 600 Class 900
1/2 0.84 1.875 2.125 2.125 2.125 2.50
3/4 1.06 2.25 2.625 2.625 2.625 2.75
1 1.31 2.625 2.875 2.875 2.875 3.125
1 1/4 1.66 3 3.25 3.25 3.25 3.50
1 1/2 1.91 3.375 3.75 3.75 3.75 3.875
2 2.38 4.125 4.375 4.375 4.375 5.625
2 1/2 2.88 4.875 5.125 5.125 5.125 6.50
3 3.50 5.375 5.875 5.875 5.875 6.625
4 4.50 6.875 7.125 7.00 7.625 8.125
5 5.56 7.75 8.50 8.375 9.50 9.75
6 6.62 8.75 9.875 9.75 10.50 11.375
8 8.62 11 12.125 12.00 12.625 14.125
10 10.75 13.375 14.25 14.125 15.75 17.125
12 12.75 16.125 16.625 16.50 18.00 19.625

A403 Wp316l Elbow Equivalent Chart

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Stainless Steel 316L Pipe Fittings 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3

ASTM A403 WP316L Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
Stainless Steel 316L Pipe Fittings 0.035 maximum 2.0 maximum 1.0 maximum 0.045 maximum 0.030 maximum 16.00 - 18.00 2.00 - 3.00 10.00 - 14.00 68.89 minimum

A403 Wp316l Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

SA 403 WP316L Physical Properties Table

Grade Density
(kg/m3)
Elastic Modulus
(GPa)
Mean Co-eff of Thermal Expansion (µm/m/°C) Thermal Conductivity
(W/m.K)
Specific Heat 0-100°C
(J/kg.K)
Elec Resistivity
(nΩ.m)
0-100°C 0-315°C 0-538°C At 100°C At 500°C
Stainless Steel 316L Pipe Fittings 8000 193 15.9 16.2 17.5 16.3 21.5 500 740

Contact US Today For Buy Types Of Stainless Steel 316L Pipe Fittings

Stainless Steel 316L Elbow

Stainless Steel 316L Elbow


Stainless Steel 316L Lateral Tee

Stainless Steel 316L Lateral Tee


Stainless Steel 316L Stub Ends

Stainless Steel 316L Stub Ends


Stainless Steel 316L Concentric Reducer

Stainless Steel 316L Concentric Reducer


SS 316L Reducer

SS WP316L Reducer


SS 316L End Cap

SS 316L End Cap


SS WP316L Long Stub End

SS WP316L Long Stub End


SS WP316L Equal Tee

SS WP316L Equal Tee


ASTM A403 WP316L Unequal Tee

ASTM A403 WP316L Unequal Tee


ASTM A403 WP316L 45 Degree Elbow

ASTM A403 WP316L 45 Degree Elbow


ASTM A403 WP316L Short Stub End

ASTM A403 WP316L Short Stub End


ASTM A403 WP316L Bend

ASTM A403 WP316L Bend



Stainless Steel 316L Pipe Fittings Suppliers In India Supplied To Different Industries For Various Purposes

Stainless Steel 316l Pipe Fittings South Africa, Kuwait, Brazil, Saudi Arabia (KSA)
Stainless Steel 316l Fittings Nigeria, Australia, Philippines, UK
Astm A403 Wp316l Pipe Fittings Malaysia, Hong Kong, Oman, UAE
Astm A403 Wp316l Fittings Singapore, Bahrain, South Africa
A403 Wp316l Elbow Italy, Iran, Chile, Singapore
A403 Wp316l Reducer Turkey, Norway, Malaysia, United Arab Emirates (UAE)
316l Ss Fittings Dammam -KSA, Belgium, Philippines, Indonesia.
Stainless Steel 316l Seamless Fittings Canada, Malaysia, Philippines, Singapore
ASTM A403 WP316L Bend Europe, Romania, Japan, Malaysia
UNS S31603 Fittings Colombia, Sweden, China, Malaysia
WERKSTOFF NR. 1.4404 Fittings Netherlands, Russia, Dubai, Malaysia
Stainless Steel 316l Welded Fittings Egypt, UK, Mexico, Spain
Stainless Steel 316l Buttweld Fittings Ellington -United States, Poland, Canada, UK



About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

13th Floor, Office No 1309, Prasad Chambers, Tata Rd No 2,
Charni Road East, Opera House, Girgaon, Mumbai,
Maharashtra 400004 (INDIA)


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy