ASTM A234 WP5 Fittings
ISO Approved Alloy Steel WP5 Buttweld Fittings Manufacturer In India And ASME SA234 WP5 Elbow Specification.
ASTM A234 WP5 Fittings
Alloy Steel WP5 Fittings
A234 WP5 CL1 Elbow
Table Of Contents
- Alloy Steel WP5 Fittings Seawater Environments?
- A234 WP5 CL1 Require High-Temperature Tolerance?
- ASTM A234 WP5 Fittings Specification List
- A234 WP5 Chemical Composition
- A234 WP5 Mechanical Properties Table
- Standard Dimensions Of A234 WP5 CL1
- A234 WP5 Material Schedule Chart
- A234 WP5 Pressure Rating Calculator
- Alloy Steel WP5 Fittings Tolerance Formula
- Get Free Quote Types Of ASTM A234 WP5 Fittings
What Are ASTM A234 WP5 Pipe Fittings?
ASTM A234 WP5 Fittings is a grading of the A234 material. This particular grade has its specific composition. It is composed of carbon, manganese, phosphorus, silicon, sulfur, chromium and molybdenum in specified quantities. The specific composition makes the A234 WP5 Fittings tolerate moderate to elevated temperatures. The thermal expansion of the material is so low that it makes better fittings which need to maintain shape at high temperatures, such as the tees, bends and elbows. ASTM A234 WP5 is a standard for steel pipe fittings. These could either be welded or seamless pipes or fittings. Most industrial piping applications use A234 WP5 material for piping and fittings to operate under high pressure as well. It is austenitic steel with specific makeover. It comes in different standards to cover pipes and fittings of different nominal sizes. The different standards cover the diameters up to 4 inches, up to 48 inches and up to 60 inches.
Alloy Steel WP5 Fittings Seawater Environments?
The excellent corrosion resistant makes the ASTM A234 Gr WP5 Fittings be applicable in seawater and chloride rich environments like water desalinization projects. The durability of the material is also very good. The ASTM A234 WP5 Fittings is used in thermal applications like the nuclear power plants where the temperatures and pressures are very high because of the material’s heat resistance.
A234 WP5 CL1 Require High-Temperature Tolerance?
Some A234 WP5 Equivalent materials could be used when the applications does not require high pressure or high temperature tolerance. The Elbow A234 WP5 is extremely long lasting due to its low thermal expansion and less corrosion under stressful conditions. The ASTM A234 Grade WP5 Elbow does not expand much under high temperatures due to its low thermal expansion rates and therefore does not break the formation of the connection. Some Alloy Steel Grade WP5 Fittings are used in low pressure and low cost applications as well. Their major application is in oil and gas industries, petroleum refineries and power generation plants but the SA234 Gr WP5 Fittings can be used in other applications as well.
ASTM A234 WP5 Fittings Specification List
| Specification: | ASTM A234 WP5 Fittings |
| Size: | Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48” |
| Type: | Butt Weld (BW), Seamless (SMLS) Welded |
| Thickness: | Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc. |
| Type Of Dimension: | BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313 |
| Standard | EN, ISO, DIN, JIS, NPT |
| Type | Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross, |
| Connection Type | Threaded/ Clamp End / End Bell / Weld/ Flange/ |
| Pressure-Temperature Class | 150LB, 300LB, 600LB, 1500LB, 2500LB. |
| Schedule: | Schedule 5 TO Schedule XXS. |
Check A234 WP5 Chemical Composition And Alloy Steel WP5 Tee Mechanical Properties Data Sheet.
A234 WP5 Chemical Composition
| Gr | C | Mn | Si | S | P | Cr | Mo |
| ASTM A234 WP5 Fittings | ≤0.15 | ≤0.6 | ≤0.5 | ≤0.04 | ≤0.03 | 4-6 | 0.44-0.65 |
A234 WP5 Mechanical Properties Table
| Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation % |
| ASTM A234 WP5 Fittings | 415 - 585 | ≥205 | ≥20 |
Dimension Table Of Alloy Steel WP5 Fittings And Largest ASTM A234 WP5 Pipe Tee Supplier In Mumbai, India.
Standard Dimensions Of A234 WP5 CL1
| NPS | O.D. | 90 Degree Elbow | 45 Degree Elbow | 180 Degree Return | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter) | (inch) | Center to Face (inch) |
Center to Face (inch) |
Center to Face (inch) |
Radius (inch) |
Center to Center (inch) |
Back to face (inch) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| NPS | O.D. | Pipe End Caps | Straight Tee | Straight Cross | Long / Short Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inch.) | (millimeter) | (inch.) | Length (inch.) |
Center to End (inch.) |
Center to End (inch.) |
Lap Diameter (inch.) |
Long Length (inch.) |
Short Length (inch.) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Refer A234 WP5 Cl1 Schedule Chart And ASTM A234 WP5 Weld Fittings Pressure Rating Calculator.
A234 WP5 Material Schedule Chart
|
DN (Normal Pipe Sizes) |
Sch 10S |
Sch 40S |
Sch 80S | ||||||
|
90 Deg Elbow | 45 Deg Elbow | Equal Pipe tee |
90 Deg Elbow | 45 Deg Elbow |
Equal Pipe tee | 90 Deg Elbow | 45 Deg Elbow |
Equal Pipe Tee | |
|
8 |
0.02 |
0.01 |
0.03 |
0.03 |
0.02 |
0.06 |
0.04 |
0.03 |
0.07 |
|
10 |
0.03 |
0.02 |
0.05 |
0.03 |
0.02 |
0.03 |
0.06 |
0.04 |
0.09 |
|
15 |
0.06 |
0.03 |
0.09 |
0.08 |
0.04 |
0.10 |
0.10 |
0.05 |
0.14 |
|
20 |
0.07 |
0.03 |
0.13 |
0.08 |
0.04 |
0.17 |
0.11 |
0.05 |
0.20 |
|
25 |
0.14 |
0.08 |
0.28 |
0.15 |
0.11 |
0.29 |
0.22 |
0.14 |
0.38 |
|
32 |
0.23 |
0.11 |
0.49 |
0.26 |
0.17 |
0.59 |
0.40 |
0.23 |
0.68 |
|
40 |
0.30 |
0.17 |
0.68 |
0.40 |
0.23 |
0.86 |
0.51 |
0.29 |
1.02 |
|
50 |
0.50 |
0.25 |
0.85 |
0.70 |
0.4 |
1.28 |
0.91 |
0.59 |
1.59 |
|
65 |
0.85 |
0.48 |
1.41 |
1.40 |
0.77 |
2.19 |
1.81 |
0.99 |
3.13 |
|
80 |
1.25 |
0.63 |
1.77 |
2.20 |
1.08 |
3.31 |
2.97 |
1.50 |
4.45 |
|
90 |
1.70 |
0.75 |
2.67 |
2.83 |
1.42 |
4.08 |
4.00 |
2.00 |
5.44 |
|
100 |
2.10 |
1.08 |
3.46 |
4.47 |
2.09 |
5.27 |
6.18 |
2.81 |
7.71 |
|
150 |
5.45 |
2.72 |
8.07 |
10.89 |
5.44 |
10.99 |
16.32 |
8.16 |
13.61 |
|
200 |
10.20 |
5.33 |
15.65 |
21.54 |
10.77 |
20.91 |
33.11 |
16.56 |
28.12 |
|
250 |
18.15 |
9.75 |
26.46 |
38.56 |
19.27 |
35.38 |
51.71 |
25.86 |
49.90 |
|
300 |
25.80 |
13.62 |
39.46 |
59.42 |
29.71 |
62.14 |
79.38 |
39.69 |
83.91 |
|
DN (Normal Pipe Sizes) |
Sch 10S |
Sch 40S |
Sch 80S | ||||||
| Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | |
|
40x.25 |
0.19 |
0.19 |
0.60 |
0.26 |
0.26 |
0.76 |
0.34 |
0.34 |
0.90 |
|
50x25 |
0.28 |
0.28 |
0.73 |
0.40 |
0.40 |
1.10 |
0.54 |
0.54 |
1.37 |
|
50x40 |
0.31 |
0.31 |
0.76 |
0.45 |
0.45 |
1.15 |
0.59 |
0.59 |
1.43 |
|
80x.50 |
0.55 |
0.55 |
1.56 |
1.00 |
1.00 |
2.91 |
1.79 |
1.79 |
3.91 |
|
100x50 |
0.78 |
0.78 |
2.94 |
1.50 |
1.50 |
4.48 |
1.95 |
1.95 |
6.55 |
|
100x80 |
0.87 |
0.87 |
3.04 |
1.74 |
1.74 |
4.64 |
2.33 |
2.33 |
6.79 |
|
150x80 |
1.82 |
1.82 |
6.86 |
3.95 |
3.95 |
9.68 |
5.51 |
5.51 |
11.57 |
|
150x100 |
1.96 |
1.96 |
7.10 |
4.07 |
4.07 |
11.94 |
5.96 |
5.96 |
11.97 |
|
200x100 |
3.01 |
3.01 |
13.46 |
6.55 |
6.55 |
17.98 |
9.23 |
9.23 |
24.18 |
|
200x150 |
3.19 |
3.19 |
14.08 |
6.74 |
6.74 |
18.82 |
10.12 |
10.12 |
25.31 |
Accept All Small And Large Orders ASTM A234 Gr WP5 Reducer In Mumbai, India And Buy SA 234 WP5 For Seamless And Welded Connection.
A234 WP5 Pressure Rating Calculator
| Pressure-Temperature ratings for ASTM A234 WP5 Fittings (psig) | |||||
|---|---|---|---|---|---|
| Temperature Ratings | Pressure Class | ||||
| 150 | 300 | ||||
| 1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
| (oF) | (oC) | ||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
| 200 | 93 | 265 | 1785 | 1350 | 910 |
| 250 | 121 | 225 | 1575 | 1200 | 825 |
| 300 | 149 | 185 | 1360 | 1050 | 735 |
| 350 | 177 | 150 | 1150 | 900 | 650 |
| 400 | 204 | - | 935 | 750 | 560 |
| 450 | 232 | - | 725 | 600 | 475 |
| 500 | 260 | - | 510 | 450 | 385 |
| 550 | 288 | - | 300 | 300 | 300 |
Alloy Steel WP5 Fittings Tolerance Formula
| ASTM A234 WP5 Fittings Tolerance | 90 Degree & 45 Degree Elbows & Tees |
Reducers & Lap Joint Stub End |
Pipe Caps | |||
| ASTM A234 WP5 Pipe Fittings (Normal Pipe Size) | O. D. at Bevel |
I. D. at End |
Wall Thick. T | Center-to-End Dimension A ,C ,B |
Over-all Length H |
Over-all Length F |
| 1/2 to 2-1/2 | +0.06 | Not less than 87.5% of nominal thickness |
+/- 0.06 | +/- 0.06 | +/- 0.12 | |
| -0.03 | ||||||
| 3 to 3-1/2 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
| 4 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
| 5 to 8 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.25 | |
| 10 to 18 | +0.16 | +/- 0.12 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
| -0.12 | ||||||
| 20 to 24 | +0.25 | +/- 0.19 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
| -0.19 | ||||||
| 26 to 30 | +0.25 | +/- 0.19 | +/- 0.12 | +/- 0.19 | +/- 0.38 | |
| -0.19 | ||||||
| 32 to 48 | +0.25 | +/- 0.19 | +/- 0.19 | +/- 0.19 | +/- 0.38 | |
| -0.19 | ||||||
Get Free Quote Types Of ASTM A234 WP5 Fittings
18 Inch, SCH 100, ASTM A234 Grade WP5 45° Elbow
2 × 1 1/2 Inch, SCH 10S, BW, A234 WP5 Cl1 90° Elbow
2-1/2 Inch, SCH160, BW, ASTM A234 Gr WP5 180° Elbow
3 Inch, SCH 40, Seamless, ASTM A234 WP5 Equal Tee
SCH 60, 14 Inch, Alloy Steel WP5 Concentric Reducer
12 Inch, SCH 40, BW, SA234 Gr WP5 Eccentric Reducer
26 Inch, ASME B16.9, AS WP5 Long Radius Elbow
26 Inch, SCH XS, ASTM A234 Alloy Steel Short Radius Elbow
12 Inch, SCH60, Alloy Steel Grade WP5 End Pipe Cap
8 x 4 Inch, SCH 40, A234 Grade WP5 Stub End
DN500, SCH XS, A234 Grade WP5 Equal Cross
24 X 6 Inch, SCH 40, ASTM A234 Grade WP5 Reducing Tee
2 Inch, SCH 40S, A234 WP5 Welded Reducing Cross
4 Inch, SCH 80, ASTM A234 WP5 Cl1 Buttweld Piggable Bend
6 Inch, Buttweld, SCH XS, ASTM A234 WP5 Pipe Bends
8 x 4 Inch, SCH 40, ASTM A234 Grade WP5 Lateral Tee
We Have Recently Delivered ASTM A234 WP5 Fittings To The Following Countries:
| Alloy Steel WP5 Buttweld Fittings | Philippines, Canada, Malaysia, Singapore |
| A234 WP5 Material | Romania, Europe, Japan, Malaysia |
| A234 WP5 CL1 Elbow | China, Colombia, Sweden, Malaysia |
| ASTM A234 WP5 Fittings | Europe, UAE, United Kingdom -UK, Malaysia |
| Alloy Steel WP5 Tee | Kuwait, Brazil, Saudi Arabia (KSA), South Africa |
| ASTM A234 WP5 Pipe Reducer | Bahrain, South Africa, Singapore |
| A234 WP5 Cl1 Fittings | Australia, Philippines, UK, Nigeria |
| ASTM A234 Gr WP5 Reducer | Hong Kong, Oman, UAE, Malaysia |
| SA 234 WP5 Seamless Fittings | Iran, Chile, Singapore, Italy |
| SA 234 WP5 Welded Fittings | Norway, Turkey, United Arab Emirates (UAE), Malaysia |
| ASTM A234 WP5 Equal Tee | Belgium, Philippines, Dammam -KSA, Indonesia. |
| Alloy Steel WP5 Concentric Reducer | France, Qatar, Thailand, Europe |
| A234 Grade WP5 Stub End | Germany, Czechia, Malaysia, Thailand |
| Alloy Steel Gr WP5 Stub End | Bangladesh, Finland, USA, Malaysia |
| ASTM A234 WP5 Pipe Bends | Dubai, Netherlands, Russia, Malaysia |