ASTM A234 WP22 Pipe Fittings
ASME SA234 WP22 Elbow Specification And Alloy Steel WP22 Buttweld Fittings Dimensions with Tolerances.
SA234 WP22 Elbow
ASTM A234 WP 22 Pipe Fittings
Alloy Steel WP22 Buttweld Cap
Table Of Contents
- What Is A234 WP22 Elbow Heat Treatment?
- A234 WP22 CL1 Have Comparatively High Yield Strength?
- A234 WP22 Specification
- ASTM A234 WP22 Fittings Dimensional Format
- A234 WP22 Chemical Composition
- ASTM A234 WP22 Class 3 Mechanical Properties
- A234 WP22 Elbow Temperature Ratings
- Alloy Steel WP22 Buttweld Fittings Minimum Weight
- Tolerance Chart Of SA 234 WP22 CL1
- Independent Stockholder Types Of ASTM A234 WP22 Fittings
What Are ASTM A234 WP22 Pipe Fittings?
ASTM A234 WP22 Fittings is made up of an alloy that consists of carbon, manganese, phosphorus, sulfur, silicon, chromium and molybdenum. The material is easy to handle, has higher elasticity, high strength and high corrosion resistance properties. ASTM A234 Gr WP22 Fittings are made up as killed steel forging and the different operations include piercing, extruding, upsetting, rolling and bending amongst others. A234 WP22 Fittings are used in chemical equipment, specialty chemicals, gas processing, pharmaceuticals, petrochemicals, sea water equipment and processes, heat exchangers, off shore oil drilling procedures, condensers and others. The ASTM A234 WP22 is a wrought carbon steel alloy producing seamless and welded material.
What Is A234 WP22 Elbow Heat Treatment?
ASTM A234 WP22 Fittings undergoes heat treatment. The heat treatment involves rising to high temperatures and then allowing for rapid cooling not faster than the rate of cooling in still air. A234 WP22 Equivalent carbon steel buttweld fittings are also used in common applications. The applications especially prefer the Elbow A234 WP22 due to its hardness and sturdiness. The ASTM A234 Grade WP22 Elbow can withstand high temperatures and pressures. Due to the high corrosion resistant property of the material, the fittings made up of A234 WP22 could perform better under stressful environments.
A234 WP22 CL1 Have Comparatively High Yield Strength?
The Alloy Steel ASTM A234 WP22 Fittings have comparatively high yield strength than ordinary stainless steel fittings. There are different specifications, schedules, standards and pressure classes that govern certain properties. The dimensions are usually of smaller pipes ranging up to 4 inches in nominal size. There are also higher dimensional applications with specific cases such as the petroleum industry. The SA234 Gr WP22 Fittings could be seamless or welded. They differ in shapes and sizes. Their various types such as bends, elbows, tees, cross, valves and others are available to fulfill different purposes. The threaded and socket welded fittings are also available to make the connection stronger and precise.
A234 WP22 Specification
| Specification: | ASTM A234 WP22 Pipe Fittings |
| Type: | Butt Weld (BW), Seamless (SMLS) Welded |
| Thickness: | Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc. |
| Type Of Dimension: | BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313 |
| Standard | EN, ISO, DIN, JIS, NPT |
| Type | Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross, |
| Connection Type | Threaded/ Clamp End / End Bell / Weld/ Flange/ |
| Pressure-Temperature Class | 150LB, 300LB, 600LB, 1500LB, 2500LB. |
| Schedule: | Schedule 5 TO Schedule XXS. |
| Size: | Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48” |
ASTM A234 WP22 Fittings Dimensional Format
| NPS | O.D. | 90 Degree Elbow | 45 Degree Elbow | 180 Degree Return | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter) | (inch) | Center to Face (inch) |
Center to Face (inch) |
Center to Face (inch) |
Radius (inch) |
Center to Center (inch) |
Back to face (inch) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
A234 WP22 Chemical Composition And Alloy Steel A234 WP22 Tee Manufacturer In India.
A234 WP22 Chemical Composition
| Gr. | C | Mn | Si | S | P | Cr | Mo |
| ASTM A234 WP22 Pipe Fittings | 0.05-0.15 | 0.3-0.5 | 0.5 | ≤0.04 | ≤0.04 | 2-2.5 | 0.87-1.13 |
Mechanical Strength Of ASTM A234 WP22 Fittings And We Are One Of The Leading Distributors Of Alloy Steel WP22 Fittings.
ASTM A234 WP22 Class 3 Mechanical Properties
| Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation % |
| ASTM A234 WP22 Pipe Fittings | 415 - 585 | ≥205 | ≥20 |
Temperature Ratings Of ASTM a234 WP22 Tee And We Provide SA234 Gr 22 Class 1/ CL3 Fittings At Low Price.
A234 WP22 Elbow Temperature Ratings
| Pressure-Temperature ratings for ASTM A234 WP22 Pipe Fittings (psig) | |||||
|---|---|---|---|---|---|
| Temperature Ratings | Pressure Class | ||||
| 150 | 300 | ||||
| 1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
| (oF) | (oC) | ||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
| 200 | 93 | 265 | 1785 | 1350 | 910 |
| 250 | 121 | 225 | 1575 | 1200 | 825 |
| 300 | 149 | 185 | 1360 | 1050 | 735 |
| 350 | 177 | 150 | 1150 | 900 | 650 |
| 400 | 204 | - | 935 | 750 | 560 |
| 450 | 232 | - | 725 | 600 | 475 |
| 500 | 260 | - | 510 | 450 | 385 |
| 550 | 288 | - | 300 | 300 | 300 |
Independent ASTM A234 Gr WP22 Class 3 Reducer Supplier In India And Alloy Steel A234-WP22 CL1 Long Stub End Minimum Weight.
Alloy Steel WP22 Buttweld Fittings Minimum Weight
|
DN (Normal Pipe Sizes) |
Sch 10S |
Sch 40S |
Sch 80S | ||||||
|
90 Deg Elbow | 45 Deg Elbow | Equal Pipe tee |
90 Deg Elbow | 45 Deg Elbow |
Equal Pipe tee | 90 Deg Elbow | 45 Deg Elbow |
Equal Pipe Tee | |
|
8 |
0.02 |
0.01 |
0.03 |
0.03 |
0.02 |
0.06 |
0.04 |
0.03 |
0.07 |
|
10 |
0.03 |
0.02 |
0.05 |
0.03 |
0.02 |
0.03 |
0.06 |
0.04 |
0.09 |
|
15 |
0.06 |
0.03 |
0.09 |
0.08 |
0.04 |
0.10 |
0.10 |
0.05 |
0.14 |
|
20 |
0.07 |
0.03 |
0.13 |
0.08 |
0.04 |
0.17 |
0.11 |
0.05 |
0.20 |
|
25 |
0.14 |
0.08 |
0.28 |
0.15 |
0.11 |
0.29 |
0.22 |
0.14 |
0.38 |
|
32 |
0.23 |
0.11 |
0.49 |
0.26 |
0.17 |
0.59 |
0.40 |
0.23 |
0.68 |
|
40 |
0.30 |
0.17 |
0.68 |
0.40 |
0.23 |
0.86 |
0.51 |
0.29 |
1.02 |
|
50 |
0.50 |
0.25 |
0.85 |
0.70 |
0.4 |
1.28 |
0.91 |
0.59 |
1.59 |
|
65 |
0.85 |
0.48 |
1.41 |
1.40 |
0.77 |
2.19 |
1.81 |
0.99 |
3.13 |
|
80 |
1.25 |
0.63 |
1.77 |
2.20 |
1.08 |
3.31 |
2.97 |
1.50 |
4.45 |
|
90 |
1.70 |
0.75 |
2.67 |
2.83 |
1.42 |
4.08 |
4.00 |
2.00 |
5.44 |
|
100 |
2.10 |
1.08 |
3.46 |
4.47 |
2.09 |
5.27 |
6.18 |
2.81 |
7.71 |
|
150 |
5.45 |
2.72 |
8.07 |
10.89 |
5.44 |
10.99 |
16.32 |
8.16 |
13.61 |
|
200 |
10.20 |
5.33 |
15.65 |
21.54 |
10.77 |
20.91 |
33.11 |
16.56 |
28.12 |
|
250 |
18.15 |
9.75 |
26.46 |
38.56 |
19.27 |
35.38 |
51.71 |
25.86 |
49.90 |
|
300 |
25.80 |
13.62 |
39.46 |
59.42 |
29.71 |
62.14 |
79.38 |
39.69 |
83.91 |
|
DN (Normal Pipe Sizes) |
Sch 10S |
Sch 40S |
Sch 80S | ||||||
| Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | |
|
40x.25 |
0.19 |
0.19 |
0.60 |
0.26 |
0.26 |
0.76 |
0.34 |
0.34 |
0.90 |
|
50x25 |
0.28 |
0.28 |
0.73 |
0.40 |
0.40 |
1.10 |
0.54 |
0.54 |
1.37 |
|
50x40 |
0.31 |
0.31 |
0.76 |
0.45 |
0.45 |
1.15 |
0.59 |
0.59 |
1.43 |
|
80x.50 |
0.55 |
0.55 |
1.56 |
1.00 |
1.00 |
2.91 |
1.79 |
1.79 |
3.91 |
|
100x50 |
0.78 |
0.78 |
2.94 |
1.50 |
1.50 |
4.48 |
1.95 |
1.95 |
6.55 |
|
100x80 |
0.87 |
0.87 |
3.04 |
1.74 |
1.74 |
4.64 |
2.33 |
2.33 |
6.79 |
|
150x80 |
1.82 |
1.82 |
6.86 |
3.95 |
3.95 |
9.68 |
5.51 |
5.51 |
11.57 |
|
150x100 |
1.96 |
1.96 |
7.10 |
4.07 |
4.07 |
11.94 |
5.96 |
5.96 |
11.97 |
|
200x100 |
3.01 |
3.01 |
13.46 |
6.55 |
6.55 |
17.98 |
9.23 |
9.23 |
24.18 |
|
200x150 |
3.19 |
3.19 |
14.08 |
6.74 |
6.74 |
18.82 |
10.12 |
10.12 |
25.31 |
Tolerance Chart Of SA 234 WP22 CL1
| ASTM A234 WP22 Pipe Fittings Tolerance | 90 Degree & 45 Degree Elbows & Tees |
Reducers & Lap Joint Stub End |
Pipe Caps | |||
| ASTM A234 WP22 Fittings (Normal Pipe Size) | O. D. at Bevel |
I. D. at End |
Wall Thick. T | Center-to-End Dimension A ,C ,B |
Over-all Length H |
Over-all Length F |
| 1/2 to 2-1/2 | +0.06 | Not less than 87.5% of nominal thickness |
+/- 0.06 | +/- 0.06 | +/- 0.12 | |
| -0.03 | ||||||
| 3 to 3-1/2 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
| 4 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
| 5 to 8 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.25 | |
| 10 to 18 | +0.16 | +/- 0.12 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
| -0.12 | ||||||
| 20 to 24 | +0.25 | +/- 0.19 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
| -0.19 | ||||||
| 26 to 30 | +0.25 | +/- 0.19 | +/- 0.12 | +/- 0.19 | +/- 0.38 | |
| -0.19 | ||||||
| 32 to 48 | +0.25 | +/- 0.19 | +/- 0.19 | +/- 0.19 | +/- 0.38 | |
| -0.19 | ||||||
Independent Stockholder Types Of ASTM A234 WP22 Fittings
8 X 8 Inch, SCH120, A234 Grade WP22 Concentric Reducer
4 Inch, SCH 120, BW, Alloy Steel WP22 Eccentric Reducer
6 Inch, SCH XXS, BW, ASME B16.9, ASTM A234 Gr WP22 Long Radius Elbow
DN450, BW, ASME B16.9, A234 WP22 Short Radius Elbow
8 Inch, Galvanized, A234 WP22 Cl1 Reducing Cross
4 Inch, SCH 80, BW, A234-WP22 Cl3 Piggable Bend
18 Inch, BW, ASTM A234 Gr WP22 Pipe Bends
14 Inch, SCH 60, Alloy Steel Grade WP22 Lateral Tee
2 Inch, SCH 80, ASTM A234 WP22 45° Elbow
16 Inch, Beveled End, A234 Grade WP22 90° Elbow
12 Inch, SCH 14, Butt Weld, ASTM A234 Gr WP22 180° Elbow
6 Inch, 36.53mm, A234 WP22 Class Equal Tee
3 Inch, SCH 40, BW, Alloy Steel Grade WP22 End Pipe Cap
2 Inch, SCH 10, Black Steel, SA234 Gr WP22 Stub End
2 Inch, ASME B16.9 SCH 14, A234 WP22 Cross
8 Inch, BW, Galvanized, A234 WP22 Class Reducing Tee
Our Materials Are Delivered To The Following Countries:
| A234 Grade WP22 Stub End | Germany, Czechia, Malaysia, Thailand |
| A234 WP22 Material | Romania, Europe, Japan, Malaysia |
| Alloy Steel WP22 Buttweld Fittings | Philippines, Canada, Malaysia, Singapore |
| Alloy Steel WP22 Tee | Kuwait, Brazil, Saudi Arabia (KSA), South Africa |
| ASTM A234 WP22 Pipe Reducer | Bahrain, South Africa, Singapore |
| A234 WP22 Cl1 Fittings | Australia, Philippines, UK, Nigeria |
| ASTM A234 Gr WP22 Reducer | Hong Kong, Oman, UAE, Malaysia |
| SA 234 WP22 Seamless Fittings | Iran, Chile, Singapore, Italy |
| A234 WP22 CL1 Elbow | China, Colombia, Sweden, Malaysia |
| ASTM A234 WP22 Equal Tee | Belgium, Philippines, Dammam -KSA, Indonesia. |
| ASTM A234 WP22 Pipe Bends | Dubai, Netherlands, Russia, Malaysia |
| SA 234 WP22 Welded Fittings | Norway, Turkey, United Arab Emirates (UAE), Malaysia |
| Alloy Steel WP22 Concentric Reducer | France, Qatar, Thailand, Europe |
| ASTM A234 WP22 Fittings | Europe, UAE, United Kingdom -UK, Malaysia |
| Alloy Steel Gr WP22 Stub End | Bangladesh, Finland, USA, Malaysia |