ASTM A234 WP11 Fittings
SA 234 WP11 Elbow and Alloy Steel A234 WP11 Buttweld Tee/ Reducer manufacturer in India.
ASTM A234 WP11 Fittings
Alloy Steel WP11 Buttweld Fittings
SA 234 WP11 Class 2 Tee
Table Of Contents
- A234 Wp11 Cl1 VS Cl2 Material Used Adapters, Unions, Bends, Elbows?
- Alloy Steel WP11 Fittings Have High Surface Finish?
- ASTM A234 WP11 Chemical Composition
- A234 WP11 Mechanical Properties
- ASTM A234 Wp11 Specification
- ASTM A234 WP11 Fittings Pressure Rating Table
- SA 234 WP11 Class 2 Dimensional Formula
- Alloy Steel WP11 Buttweld Fittings Maximum Weight
- A234 WP11 CL1 Elbow Tolerance Formula
- Available In A Wide Range Types Of ASTM A234 WP11 Fittings
What Are ASTM A234 WP11 Pipe Fittings?
ASTM A234 WP11 Fittings is highly resistant to corrosion and abrasion. The A234 WP11 is a grading of the A234 material. The A234 WP11 Fittings are manufactured from a single piece of alloy material and therefore cannot be supported with porosity. They are highly resistant to crevice corrosion attack, pitting corrosion, corrosion stress cracking and acidity. These are used in especially high pressure applications. The A234 WP11 material is used to produce many different products. Among the ASTM A234 WP11 products, the ASTM A234 Gr WP11 Fittings are the most common. The pipe fittings are components used in piping to connect different fittings or pipes together.
A234 Wp11 Cl1 VS Cl2 Material Used Adapters, Unions, Bends, Elbows?
The fittings differ in sizes, shapes and standards. The variety of fittings made from the A234 Grade WP11 material include adapters, unions, couplings, tees, bends, elbows and others. The material grade is specific for mechanical properties but in some cases A234 WP11 Equivalent materials could be used as replacements when the requirements are not so specific. These have lower expansion rates under high temperature and can withstand high pressure. These properties can be used fully in Elbow A234 WP11 to make sure the elbow does not disorientate due to the expansion. The ASTM A234 Grade WP11 Elbow therefore could be fitted with other grades of material and yet maintain the integrity of the whole system.
Alloy Steel WP11 Fittings Have High Surface Finish?
The Alloy Steel Grade WP11 Fittings are durable and have high surface finish. The surface finish also provides high accuracy of dimensions along a wide range of fittings which is important in precision fittings for sensitive applications like the chemical and pharmaceutical industries. They also have steady flow and good turbulent flow. The chemical composition of the ASTM A234 WP11 Fittings makes it possible to have all the best mechanical properties. The composition includes carbon, manganese, phosphorus, silicon, sulfur, chromium and molybdenum.
ASTM A234 WP11 Chemical Composition
| WPB B,C,D,E, | WPC C,D,E, | WP11 CL1 | WP11 CL2, | WP11 CL3 |
|---|---|---|---|---|
| Carbon | 0.3 | 0.35 | 0.05–0.15 | 0.05–0.20 |
| Manganese | 0.29–1.06 | 0.29–1.06 | 0.30–0.60 | 0.30–0.80 |
| Phosporus | 0.05 | 0.05 | 0.03 | 0.04 |
| Sulfur | 0.058 | 0.058 | 0.03 | 0.04 |
| Silicon | 0.10 minimum | 0.10 minimum | 0.50–1.00 | 0.50–1.00 |
| Chromium | 0.4 | 0.4 | 1.00–1.50 | 1.00–1.50 |
| Molybdenum | 0.15 maximum | 0.15 maximum | 0.44–0.65 | 0.44–0.65 |
| Nickel | 0.4 | 0.4 | … | … |
| Copper | 0.4 | 0.4 | … | … |
| Others | Vanadium 0.08 | Vanadium 0.08 | … | … |
A234 WP11 Mechanical Properties
| Tensile Requirements | WPB | WP11CL1 | WP11CL3 |
| Tensile Strength, minimum, ksi[MPa] | 60-85 | 60-85 | 75-100 |
| (0.2% offset or 0.5% extension-under-load) | [415-585] | [415-585] | [520-690] |
| Yield Strength, minimum, ksi[MPa] | 32 | 30 | 45 |
| [240] | [205] | [310] |
ASTM A234 WP11 material specification, Alloy Steel WP11 Cl2/ Cl1 Pipe Bend Manufacturer in Mumbai.
ASTM A234 Wp11 Specification
| Specification: | ASTM A234 WP11 Fittings |
| Schedule: | Schedule 5 TO Schedule XXS. |
| Size: | Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48” |
| Type: | Butt Weld (BW), Seamless (SMLS) Welded |
| Thickness: | Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc. |
| Type Of Dimension: | BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313 |
| Standard | EN, ISO, DIN, JIS, NPT |
| Type | Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross, |
| Connection Type | Threaded/ Clamp End / End Bell / Weld/ Flange/ |
| Pressure-Temperature Class | 150LB, 300LB, 600LB, 1500LB, 2500LB. |
A234 WP11 CL2 Reducer Pressure Rating Table And ASTM A234 WP11 Welded Fittings Manufacturer In India.
ASTM A234 WP11 Fittings Pressure Rating Table
| Pressure-Temperature ratings for ASTM A234 WP11 Fittings (psig) | |||||
|---|---|---|---|---|---|
| Temperature Ratings | Pressure Class | ||||
| 150 | 300 | ||||
| 1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
| (oF) | (oC) | ||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
| 200 | 93 | 265 | 1785 | 1350 | 910 |
| 250 | 121 | 225 | 1575 | 1200 | 825 |
| 300 | 149 | 185 | 1360 | 1050 | 735 |
| 350 | 177 | 150 | 1150 | 900 | 650 |
| 400 | 204 | - | 935 | 750 | 560 |
| 450 | 232 | - | 725 | 600 | 475 |
| 500 | 260 | - | 510 | 450 | 385 |
| 550 | 288 | - | 300 | 300 | 300 |
SA 234 WP11 Class 2 Dimensional Formula
| NPS | O.D. | 90 Degree Elbow | 45 Degree Elbow | 180 Degree Return | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter) | (inch) | Center to Face (inch) |
Center to Face (inch) |
Center to Face (inch) |
Radius (inch) |
Center to Center (inch) |
Back to face (inch) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| NPS | O.D. | Pipe End Caps | Straight Tee | Straight Cross | Long / Short Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inch.) | (millimeter) | (inch.) | Length (inch.) |
Center to End (inch.) |
Center to End (inch.) |
Lap Diameter (inch.) |
Long Length (inch.) |
Short Length (inch.) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Accept All Small And Large Orders Of Alloy Steel WP11 Fittings In India And SA 234 WP11 Class 2 Tee Maximum Weight.
Alloy Steel WP11 Buttweld Fittings Maximum Weight
|
DN (Normal Pipe Sizes) |
Sch 10S |
Sch 40S |
Sch 80S | ||||||
|
90 Deg Elbow | 45 Deg Elbow | Equal Pipe tee |
90 Deg Elbow | 45 Deg Elbow |
Equal Pipe tee | 90 Deg Elbow | 45 Deg Elbow |
Equal Pipe Tee | |
|
8 |
0.02 |
0.01 |
0.03 |
0.03 |
0.02 |
0.06 |
0.04 |
0.03 |
0.07 |
|
10 |
0.03 |
0.02 |
0.05 |
0.03 |
0.02 |
0.03 |
0.06 |
0.04 |
0.09 |
|
15 |
0.06 |
0.03 |
0.09 |
0.08 |
0.04 |
0.10 |
0.10 |
0.05 |
0.14 |
|
20 |
0.07 |
0.03 |
0.13 |
0.08 |
0.04 |
0.17 |
0.11 |
0.05 |
0.20 |
|
25 |
0.14 |
0.08 |
0.28 |
0.15 |
0.11 |
0.29 |
0.22 |
0.14 |
0.38 |
|
32 |
0.23 |
0.11 |
0.49 |
0.26 |
0.17 |
0.59 |
0.40 |
0.23 |
0.68 |
|
40 |
0.30 |
0.17 |
0.68 |
0.40 |
0.23 |
0.86 |
0.51 |
0.29 |
1.02 |
|
50 |
0.50 |
0.25 |
0.85 |
0.70 |
0.4 |
1.28 |
0.91 |
0.59 |
1.59 |
|
65 |
0.85 |
0.48 |
1.41 |
1.40 |
0.77 |
2.19 |
1.81 |
0.99 |
3.13 |
|
80 |
1.25 |
0.63 |
1.77 |
2.20 |
1.08 |
3.31 |
2.97 |
1.50 |
4.45 |
|
90 |
1.70 |
0.75 |
2.67 |
2.83 |
1.42 |
4.08 |
4.00 |
2.00 |
5.44 |
|
100 |
2.10 |
1.08 |
3.46 |
4.47 |
2.09 |
5.27 |
6.18 |
2.81 |
7.71 |
|
150 |
5.45 |
2.72 |
8.07 |
10.89 |
5.44 |
10.99 |
16.32 |
8.16 |
13.61 |
|
200 |
10.20 |
5.33 |
15.65 |
21.54 |
10.77 |
20.91 |
33.11 |
16.56 |
28.12 |
|
250 |
18.15 |
9.75 |
26.46 |
38.56 |
19.27 |
35.38 |
51.71 |
25.86 |
49.90 |
|
300 |
25.80 |
13.62 |
39.46 |
59.42 |
29.71 |
62.14 |
79.38 |
39.69 |
83.91 |
|
DN (Normal Pipe Sizes) |
Sch 10S |
Sch 40S |
Sch 80S | ||||||
| Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | |
|
40x.25 |
0.19 |
0.19 |
0.60 |
0.26 |
0.26 |
0.76 |
0.34 |
0.34 |
0.90 |
|
50x25 |
0.28 |
0.28 |
0.73 |
0.40 |
0.40 |
1.10 |
0.54 |
0.54 |
1.37 |
|
50x40 |
0.31 |
0.31 |
0.76 |
0.45 |
0.45 |
1.15 |
0.59 |
0.59 |
1.43 |
|
80x.50 |
0.55 |
0.55 |
1.56 |
1.00 |
1.00 |
2.91 |
1.79 |
1.79 |
3.91 |
|
100x50 |
0.78 |
0.78 |
2.94 |
1.50 |
1.50 |
4.48 |
1.95 |
1.95 |
6.55 |
|
100x80 |
0.87 |
0.87 |
3.04 |
1.74 |
1.74 |
4.64 |
2.33 |
2.33 |
6.79 |
|
150x80 |
1.82 |
1.82 |
6.86 |
3.95 |
3.95 |
9.68 |
5.51 |
5.51 |
11.57 |
|
150x100 |
1.96 |
1.96 |
7.10 |
4.07 |
4.07 |
11.94 |
5.96 |
5.96 |
11.97 |
|
200x100 |
3.01 |
3.01 |
13.46 |
6.55 |
6.55 |
17.98 |
9.23 |
9.23 |
24.18 |
|
200x150 |
3.19 |
3.19 |
14.08 |
6.74 |
6.74 |
18.82 |
10.12 |
10.12 |
25.31 |
A234 Gr WP11 Reducer Dimensions Chart According to ASME B16.9 And Specialise In Distributing Of ASTM A234 WP11 Pipe Fittings In Mumbai, India.
A234 WP11 CL1 Elbow Tolerance Formula
| ASTM A234 WP11 Pipe Fittings Tolerance | 90 Degree & 45 Degree Elbows & Tees |
Reducers & Lap Joint Stub End |
Pipe Caps | |||
| ASTM A234 WP11 Fittings (Normal Pipe Size) | O. D. at Bevel |
I. D. at End |
Wall Thick. T | Center-to-End Dimension A ,C ,B |
Over-all Length H |
Over-all Length F |
| 1/2 to 2-1/2 | +0.06 | Not less than 87.5% of nominal thickness |
+/- 0.06 | +/- 0.06 | +/- 0.12 | |
| -0.03 | ||||||
| 3 to 3-1/2 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
| 4 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
| 5 to 8 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.25 | |
| 10 to 18 | +0.16 | +/- 0.12 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
| -0.12 | ||||||
| 20 to 24 | +0.25 | +/- 0.19 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
| -0.19 | ||||||
| 26 to 30 | +0.25 | +/- 0.19 | +/- 0.12 | +/- 0.19 | +/- 0.38 | |
| -0.19 | ||||||
| 32 to 48 | +0.25 | +/- 0.19 | +/- 0.19 | +/- 0.19 | +/- 0.38 | |
| -0.19 | ||||||
Available In A Wide Range Types Of ASTM A234 WP11 Fittings
12 Inch, SCH-STD, ASTM A234 WP11 Reducing Cross
12 Inch, Seamless, Alloy Steel A234 WP11 Piggable Bend
36 Inch, 90 Degree, A234 WP11 Pipe Bends
3 Inch, Buttweld, SCH 20, ASTM A234 WP11 Cl2 Lateral Tee
DN450 x DN200, Butt Welded, A234 Gr WP11 45° Elbow
12 Inch, SCH40, BW, ASTM A234 Gr.WP11 Cl.1 90° Elbow
6 Inch, SCH XXS, ASTM A234 Gr WP11 Cl2 180° Elbow
SCH XXS, 8 Inch, Black, ASTM A234 Gr WP11 Equal Tee
SCH 160, ASME B16.9, ASTM A234 Grade WP11 Concentric Reducer
12 Inch, SCH 40, BW, Alloy Steel WP11 Eccentric Reducer
4 Inch, SCH 80, BW, SA234 Gr WP11 Long Radius Elbow
18 Inch, BW, ANSI B16.9, Alloy Steel Grade WP11 Short Radius Elbow
Butt Welded, 3 Inch, ASTM A234 Grade WP11 End Pipe Cap
12 Inch, Seamless, SCH 120, A234 WP11 Stub End
2 Inch, SCH XXS, ASTM A234 WP11 Equal Cross
SCH XXS, 5 Inch, SCH 180, ASTM A234 WP11 Reducing Tee
ASTM A234 WP11 Fittings Suppliers In India Supplied To Different Industries For Various Purposes:
| ASTM A234 WP11 Equal Tee | Belgium, Philippines, Dammam -KSA, Indonesia. |
| Alloy Steel WP11 Concentric Reducer | France, Qatar, Thailand, Europe |
| ASTM A234 WP11 Fittings | Europe, UAE, United Kingdom -UK, Malaysia |
| Alloy Steel WP11 Tee | Kuwait, Brazil, Saudi Arabia (KSA), South Africa |
| ASTM A234 WP11 Pipe Reducer | Bahrain, South Africa, Singapore |
| A234 WP11 Cl1 Fittings | Australia, Philippines, UK, Nigeria |
| ASTM A234 Gr WP11 Reducer | Hong Kong, Oman, UAE, Malaysia |
| SA 234 WP11 Seamless Fittings | Iran, Chile, Singapore, Italy |
| SA 234 WP11 Welded Fittings | Norway, Turkey, United Arab Emirates (UAE), Malaysia |
| A234 Grade WP11 Stub End | Germany, Czechia, Malaysia, Thailand |
| Alloy Steel Gr WP11 Stub End | Bangladesh, Finland, USA, Malaysia |
| ASTM A234 WP11 Pipe Bends | Dubai, Netherlands, Russia, Malaysia |
| Alloy Steel WP11 Buttweld Fittings | Philippines, Canada, Malaysia, Singapore |
| A234 WP11 Material | Romania, Europe, Japan, Malaysia |
| A234 WP11 CL1 Elbow | China, Colombia, Sweden, Malaysia |