ASTM A182 F9 Forged Fittings

Standard Specification Of Chrome Moly F9 Square Head Plug And High-Quality Alloy Steel F9 Elbow Manufacturer In India.

ASTM A182 F9 Forged Fittings

ASTM A182 F9 Forged Fittings

Alloy Steel F9 Elbow

Alloy Steel F9 Elbow

SA182 F9 F9 Socket Weld Union

SA182 F9 F9 Socket Weld Union

Table Of Contents


Machinability Properties Of ASTM A182 F9 Forged Fittings?

The ASTM A182 F9 Forged Fittings offer maximum machinability and weldability properties as as they have a low content of carbon. At our factory, the Chromium Alloy Steel A182 F9 Socket Weld Union is first normalised, followed by which the alloy has been heat treated. This heat treated fittings tend to be devoid of any internal stresses and thus exhibiting higher features.


ASTM A182 F9 Forged Fittings

Alloy Steel F9 Fittings Used Non-critical Applications?

The ASTM A182 specified Chromoly Steel Socket Weld F9 Full Couplings we offer tends to be low in Carbon, with added elements Manganese and Silicon. Low AS F9 Socket Weld Fittings are usable for applications that are non-critical yet have some load or pressure, for instance refrigeration Alloy Steel F9 Equal Tee, which work at constant temperatures. Hence, the Alloy Steel A182 F9 Forged Pipe Fittings we produce are known to not only have a uniform structure but also are utilized for pressure piping in the steam and power systems.


ASTM A182 F9 Elbow Used Highly Tempered Condition?

Sometimes, because of its cost efficiency and good machinable properties, the Chromoly Steel Alloy BS 3799 Union is used in the unhardened or hardened and highly tempered condition. If the Alloy Steel Forged 11/4 Cr-1/2Mo Threaded Plug has been supplied in a hardened and tempered condition, the use of these fittings is not recommended. This is because of effect on the mechanical properties of the ASTM A182 F9 Forged Fittings within the heat affected zone.


ASME SA182 F9 Forged Plug Use In The Annealed Condition?

Although the Chromoly Steel Grade F9 Street Elbow tends to have better resistance to corrosion, this is a property where the former is also lower in comparison to not only most of the ferrite stainless steels grades, but also to all of the 300 series austenitic grade stainless steels. Though F9 fittings have optimum corrosion resistance in the hardened and tempered condition, the alloy is not therefore recommended for use in the annealed condition.


Check A182 F9 Tee Chemical Composition And Contact Us For SA182 F9 45 Degree Elbow Instant Delivery In India.


ASTM A182 F9 Fittings Specification

Specification : ASTM A182 F9 Forged Fittings
Size Threaded Fittings = ½” – 4”
Pressure Rating Threaded Fittings = Class 2000, Class 3000, Class 6000
Type Of Pipe systems 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee, Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple.
Thread Connections ASME B16.11 (Socket Welding and Threaded) Fittings, MSS-SP-83 (Class Unions) Fittings, ASME B16.3 (Malleable Iron Fittings) Fittings, ASME B16.4 ( Gray Iron Fittings) Fittings, ASME B16.39 (Malleable Iron Unions) Fittings, ASME B16.34 (Valves — Flanged) Fittings, ASME B16.39 (Malleable Iron Pipe Unions, 150#, 250#, Or 300#) Fittings.
Standards ASME B16.11 (American Standard), Bs3799, MSS SP 79, JIS B2302, MSS-SP-97 (Threadolet), MSS-SP-83 (Union), ASME B36.19 (Nipple)
Types Of Thread NPT Fittings, BSPP Fittings, BSPT Fittings, PF Fittings, PT Fittings, MPT
Applications Oil and Gas
Chemical
Power station
Water Pipeline
Noncritical Applications
Fire Protection
Advantages Of Simple Usage
Easy installation
Economic as cheaper

SA182 F9 Swage Nipple Equivalent And Reliable Alloy Steel A182 F9 Forged Fittings Supplier In India.


Alloy Steel F9 Union Equivalent Chart

STANDARD UNS WERKSTOFF NR. Trade Name
ASTM A182 F9 Forged Fittings K90941 1.7386 9Cr-1Mo

Chemical Composition Of UNS K90941 Fittings

Gr C Mn Si S P Cr Mo
ASTM A182 F9 Forged Fittings 0.15 0.3 – 0.6 0.5 – 1 0.03 0.03 8 – 10 0.9 – 1.1

A182 F9 Threaded Street Elbow Mechanical Properties And Buy Directly From ASME A182 Grade F9 Socket Weld Cap In Mumbai, India.

Mechanical Chart Of WERKSTOFF NR. 1.7386 Fittings

Grade Tensile Strength (Mpa) Yield Strength (Mpa) Elongation %
ASTM A182 F9 Forged Fittings 380 585 20

SA A182 F9 Screwed Bushing Material Dimensions And Buy ASTM A182 F9 Threaded Fittings At Low-Price.

SA182 F9 Tee Dimensions Chart

DN NPS Center to End
NPT Elbow, NPT Tee, NPT Cross
A
Center to End
45 Deg Elbow
C
O.D.
of Band
H
Min. Wall
Thick. G
Length of
Thread.
Minimum (1)
Class 2000 Class 3000 Class 6000 Class 2000 Class 3000 Class 6000 Class 2000 Class 3000 Class 6000 Class 2000 Class 3000 Class 6000 B L2
6 1/8 21 21 25 17 17 19 22 22 25 3.18 3.18 6.35 6.4 6.7
8 1/4 21 25 28 17 19 22 22 25 33 3.18 3.30 6.60 8.1 10.2
10 3/8 25 28 33 19 22 25 25 33 38 3.18 3.51 6.98 9.1 10.4
15 1/2 28 33 38 22 25 28 33 38 46 3.18 4.09 8.15 10.9 13.6
20 3/4 33 38 44 25 28 33 38 46 56 3.18 4.32 8.53 12.7 13.9
25 1 38 44 51 28 33 35 46 56 62 3.68 4.98 9.93 14.7 17.3
32 1-1/4 44 51 60 33 35 43 56 62 75 3.89 5.28 10.59 17.0 18.0
40 1-1/2 51 60 64 35 43 44 62 75 84 4.01 5.56 11.07 17.8 18.4
50 2 60 64 83 43 44 52 75 86 102 4.27 7.14 12.09 19.0 19.2
65 2-1/2 76 83 95 52 52 64 92 102 121 5.61 7.65 15.29 23.6 28.9
85 3 86 95 106 64 64 79 109 121 146 5.99 8.84 16.64 25.9 30.5
100 4 106 114 114 79 79 79 146 152 152 6.55 11.18 18.67 27.7 33.0

DN NPS End to End
Couplings
W
End to End
Caps
P
O.D. D End Wall
Thick.
G Minimum
Length of
Thread.
Minimum (1)
Class 3000&Class 6000 Class 3000 Class 6000 Class 3000 Class 6000 Class 3000 Class 6000 B L2
6 1/8 32 19 16 22 4.8 6.4 6.7
8 1/4 35 25 27 19 25 4.8 6.4 8.1 10.2
10 3/8 38 25 27 22 32 4.8 6.4 9.1 10.4
15 1/2 48 32 33 28 38 6.4 7.9 10.9 13.6
20 3/4 51 37 38 35 44 6.4 7.9 12.7 13.9
25 1 60 41 43 44 57 9.7 11.2 14.7 17.3
32 1-1/4 67 44 46 57 64 9.7 11.2 17.0 18.0
40 1-1/2 79 44 48 64 76 11.2 12.7 17.8 18.4
50 2 86 48 51 76 92 12.7 15.7 19.0 19.2
65 2-1/2 92 60 64 92 108 15.7 19.0 23.6 28.9
80 3 108 65 68 108 127 19.0 22.4 25.9 30.5
100 4 121 68 75 140 159 22.4 28.4 27.7 33.0

Alloy Steel A182 F9 Forged Fittings Maximum Weight

Normal Pipe Size A B QTY Weight In KG
¼ 0.81 0.88 160 0.20
0.97 1.00 130 0.26
½ 1.12 1.31 100 0.57
¾ 1.31 1.5 75 0.71
1 1.5 1.81 40 1.08
1 ¼ 1.75 2.19 25 1.68
1 ½ 2.00 2.44 18 2.38
2 2.38 2.97 10 3.55
2 ½ 3.00 3.62 4 6.22
3 3.38 4.31 2 10.36
4 4.19 5.75 1 23.91

SA A182 F9 Screwed Bushing Pressure Rating Class

ASTM A182 F9 Forged Fittings Pressure-Temperature
Temperature Class
150 300
1/4 - 1 inch. 1 1/4 - 2 inch. 2 1/2 - 3 inch.
(oF) (oC)
-20 to 150 -29 to 66 300 2000 1500 1000
200 93 265 1785 1350 910
250 121 225 1575 1200 825
300 149 185 1360 1050 735
350 177 150 1150 900 650
400 204 - 935 750 560
450 232 - 725 600 475
500 260 - 510 450 385
550 288 - 300 300 300

Buy Directly From Types Of ASTM A182 F9 Forged Fittings

ASTM A182 Grade F9 Screwed Union

ASTM A182 Grade F9 Screwed Union

Alloy Steel Gr F9 Threaded Pipe Nipple

Alloy Steel Gr F9 Threaded Pipe Nipple

F9 Alloy Steel Socket Weld Half Coupling

F9 Alloy Steel Socket Weld Half Coupling

SA182 F9 Alloy Steel Forged 45 Degree Elbow

SA182 F9 Alloy Steel Forged 45 Degree Elbow

ASTM A182 F9 Forged Socket Weld Tee

ASTM A182 F9 Forged Socket Weld Tee

ASTM A182 Gr F9 Socket Weld Full Coupling

ASTM A182 Gr F9 Socket Weld Full Coupling

Alloy Steel F9 Threaded / Screwed Bushing

Alloy Steel F9 Threaded / Screwed Bushing

AS A182 Gr. F9 Forged Socket Weld Cross

AS A182 Gr. F9 Forged Socket Weld Cross

ASTM A182 Alloy Steel F9 Forged Boss

ASTM A182 Alloy Steel F9 Forged Boss

ASTM A182 F9 Forged 45 Degree Lateral Tee

ASTM A182 F9 Forged 45 Degree Lateral Tee

Chrome Moly F9 Forged Square Head Plug

Chrome Moly F9 Forged Square Head Plug

ASTM A182 F9 Forged Swage Nipple

ASTM A182 F9 Forged Swage Nipple

Alloy Steel F9 Forged 90 Degree Elbow

Alloy Steel F9 Forged 90 Degree Elbow

ASME SA182 F9 Threaded / Screwed Hex Plug

ASME SA182 F9 Threaded / Screwed Hex Plug

ASTM A182 Gr F9 Threaded Street Elbow

ASTM A182 Gr F9 Threaded Street Elbow

Alloy Steel A182 F9 Socket Weld Cap

Alloy Steel A182 F9 Socket Weld Cap


An Oldest ASTM A182 F9 Forged Fittings Suppliers In India, Recently Shipped To The Following Countries:

Chrome Moly F9 Square Head Plug Germany, Czechia, Malaysia, Thailand
ASTM A182 F9 Forged Socket Weld Tee Finland, Malaysia, USA, Bangladesh
ASTM A182 Gr F9 Threaded Street Elbow Italy, Iran, Chile, Singapore
SA182 F9 Socket Weld Outlet Colombia, Malaysia, Sweden, China
ASTM A182 F9 Fittings Dubai, Netherlands, Russia, Malaysia
Alloy Steel F9 Union South Africa, Saudi Arabia (KSA), Kuwait, Brazil
SA182 F9 Socket Weld Hex Plug Philippines, Nigeria, Australia, UK
Alloy Steel F9 Fittings Japan, Europe, Romania, Malaysia
ASTM A182 F9 Elbow United Arab Emirates (UAE), Norway, Malaysia, Turkey
A182 F9 Threaded Fittings Dammam -KSA, Indonesia, Belgium, Philippines.
ASTM A182 F9 Forged Fittings Canada, Singapore, Malaysia, Philippines
A182 Grade F9 Screwed Bushing France, Thailand, Europe, Qatar
Alloy Steel A182 F9 Forged Fittings Oman, Malaysia, Hong Kong, UAE
Chrome Moly A182 Gr F9 Fittings South Africa, Bahrain, Singapore
F9 Alloy Steel Socket Weld Half Coupling Egypt, Spain, UK, Mexico


About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy