Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

ASTM A182 F5 Forged Fittings

ASTM A182 F5 Elbow Chemical Composition And A182 F5 Threaded Fittings Material Specification.

ASTM A182 F5 Forged Fittings

ASTM A182 F5 Forged Fittings

Alloy Steel F5 Fittings

Alloy Steel F5 Fittings

SA182 F5 Socket Weld Outlet

SA182 F5 Socket Weld Outlet

Table Of Contents


Industrial Use Of ASTM A182 F5 Forged Fittings?

ASTM A182 F5 Forged Fittings are generally produced thicker and much heavier because they have been intended for heavy industrial use. At Rajtilak Metal, the forged Chromium Alloy Steel F5 SW Cap eliminates the as- cast loose defect, which can be produced during metal smelting process, thereby optimize the microstructure of the metal. Meanwhile because of the intact flow of the metal, the mechanical properties of the forged 4142 Chromoly Forged Threaded F5 Full Couplings tends to be even better in comparison that of castings in same material.


ASTM A182 F5 Forged Fittings

Alloy Steel F5 Threaded Plug Use In High-Pressure Applications?

Our client who use the Chromoly BS3799 AS F5 Forged Tee often note that this metal is an ideal choice for not only high temperature but also high pressure applications. Further, this chromium- moly based Alloy Steel F5 Class 6000 Threaded Plug displays good resistance against corrosion. Specifically speaking, the metal has good resistance against oxidation corrosion due to the increase content of chromium in its alloy.


How Many Temperature Used SA182 F5 Forged Fittings?

The surface of the Alloy Steel ASTM A182 F5 Forged Fittings, at our factory is often either ground or polished, which in turn aids in the removal of any traces of oxide as well as surface decarburization. Low Alloy Steel SA182 F5 Threaded Fitting can be used in continuous service up to an elevated temperature of about 1300 °F, where scaling tends to become excess. These Alloy Steel A182 F5 Forged Fittings can also be used in intermittent service at elevated temperatures as high as above 1500 °F. The specified Fittings, in this case Alloy Socket Weld F5 Equal Tee is useful for the storage and handling of acetic acid. Especially in solutions where acetic acid has been combined with formic acid or when aeration is not possible for the Alloy Steel F5 Socket weld Fitting, as oxygen protects the metal under such conditions, although it provides the greatest level of resistance to corrosion.


Alloy Steel F5 Forged Elbow Chemical Compatibility

Gr C Mn Si S P Cr Mo
ASTM A182 F5 Forged Fittings 0.15 0.3 – 0.6 0.5 0.03 0.03 4 – 6 0.044 – 0.65

Alloy Steel F5 Forged Plug Mechanical Strength

Gr Tensile Strength (Mpa) Yield Strength (Mpa) Elongation %
ASTM A182 F5 Forged Fittings 275 485 20

Alloy Steel F5 Fitting Specification Table

Specification : ASTM A182 F5 Forged Fittings
Pressure Rating Threaded Fittings = Class 2000, Class 3000, Class 6000
Type Of Pipe systems 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee, Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple.
Thread Connections ASME B16.11 (Socket Welding and Threaded), MSS-SP-83 (Class Unions), ASME B16.3 (Malleable Iron Fittings), ASME B16.4 ( Gray Iron Fittings), ASME B16.39 (Malleable Iron Unions), ASME B16.34 (Valves — Flanged), ASME B16.39 (Malleable Iron Pipe Unions, 150#, 250#, Or 300#).
Standards ASME B16.11 (American Standard), Bs3799, MSS SP 79, JIS B2302, MSS-SP-97 (Threadolet), MSS-SP-83 (Union), ASME B36.19 (Nipple)
Types Of Thread NPT, BSPP, BSPT, PF, PT, MPT
Applications Oil and Gas
Chemical
Power station
Water Pipeline
Noncritical Applications
Fire Protection
Advantages Of Simple Usage
Easy installation
Economic as cheaper
Size Threaded Fittings = ½” – 4”

ASTM A182 F5 Fittings Equivalent Grades

STANDARD UNS WERKSTOFF NR. Trade Name
ASTM A182 F5 Forged Fittings K41545 1.7362 5Cr-1/2Mo

ASTM A182 F5 Fittings Manufacturer In India And Dimension Table Of Alloy Steel F5 Union.


Standard Dimensions Of ASTM A182 F5 Reducer

DN NPS Center to End
NPT Elbow, NPT Tee, NPT Cross
A
Center to End
45 Deg Elbow
C
O.D.
of Band
H
Min. Wall
Thick. G
Length of
Thread.
Minimum (1)
Class 2000 Class 3000 Class 6000 Class 2000 Class 3000 Class 6000 Class 2000 Class 3000 Class 6000 Class 2000 Class 3000 Class 6000 B L2
6 1/8 21 21 25 17 17 19 22 22 25 3.18 3.18 6.35 6.4 6.7
8 1/4 21 25 28 17 19 22 22 25 33 3.18 3.30 6.60 8.1 10.2
10 3/8 25 28 33 19 22 25 25 33 38 3.18 3.51 6.98 9.1 10.4
15 1/2 28 33 38 22 25 28 33 38 46 3.18 4.09 8.15 10.9 13.6
20 3/4 33 38 44 25 28 33 38 46 56 3.18 4.32 8.53 12.7 13.9
25 1 38 44 51 28 33 35 46 56 62 3.68 4.98 9.93 14.7 17.3
32 1-1/4 44 51 60 33 35 43 56 62 75 3.89 5.28 10.59 17.0 18.0
40 1-1/2 51 60 64 35 43 44 62 75 84 4.01 5.56 11.07 17.8 18.4
50 2 60 64 83 43 44 52 75 86 102 4.27 7.14 12.09 19.0 19.2
65 2-1/2 76 83 95 52 52 64 92 102 121 5.61 7.65 15.29 23.6 28.9
85 3 86 95 106 64 64 79 109 121 146 5.99 8.84 16.64 25.9 30.5
100 4 106 114 114 79 79 79 146 152 152 6.55 11.18 18.67 27.7 33.0

DN NPS End to End
Couplings
W
End to End
Caps
P
O.D. D End Wall
Thick.
G Minimum
Length of
Thread.
Minimum (1)
Class 3000&Class 6000 Class 3000 Class 6000 Class 3000 Class 6000 Class 3000 Class 6000 B L2
6 1/8 32 19 16 22 4.8 6.4 6.7
8 1/4 35 25 27 19 25 4.8 6.4 8.1 10.2
10 3/8 38 25 27 22 32 4.8 6.4 9.1 10.4
15 1/2 48 32 33 28 38 6.4 7.9 10.9 13.6
20 3/4 51 37 38 35 44 6.4 7.9 12.7 13.9
25 1 60 41 43 44 57 9.7 11.2 14.7 17.3
32 1-1/4 67 44 46 57 64 9.7 11.2 17.0 18.0
40 1-1/2 79 44 48 64 76 11.2 12.7 17.8 18.4
50 2 86 48 51 76 92 12.7 15.7 19.0 19.2
65 2-1/2 92 60 64 92 108 15.7 19.0 23.6 28.9
80 3 108 65 68 108 127 19.0 22.4 25.9 30.5
100 4 121 68 75 140 159 22.4 28.4 27.7 33.0

We Are Supplying SA182 F5 Socket Weld Hex Plug In India And Alloy Steel A182 F5 Forged Fittings Schedule Chart.


A182 F5 Threaded Fittings Schedule Chart

Normal Pipe Size A B QTY Weight In KG
¼ 0.81 0.88 160 0.20
0.97 1.00 130 0.26
½ 1.12 1.31 100 0.57
¾ 1.31 1.5 75 0.71
1 1.5 1.81 40 1.08
1 ¼ 1.75 2.19 25 1.68
1 ½ 2.00 2.44 18 2.38
2 2.38 2.97 10 3.55
2 ½ 3.00 3.62 4 6.22
3 3.38 4.31 2 10.36
4 4.19 5.75 1 23.91

Stocking Distributor Of Chrome Moly A182 Gr F5 Fittings And Visit Our A182 Grade F5 Screwed Bushing Factory In India.

UNS K41545 Union Pressure Rating Calculator

ASTM A182 F5 Forged Fittings Pressure-Temperature
Temperature Class
150 300
1/4 - 1 inch. 1 1/4 - 2 inch. 2 1/2 - 3 inch.
(oF) (oC)
-20 to 150 -29 to 66 300 2000 1500 1000
200 93 265 1785 1350 910
250 121 225 1575 1200 825
300 149 185 1360 1050 735
350 177 150 1150 900 650
400 204 - 935 750 560
450 232 - 725 600 475
500 260 - 510 450 385
550 288 - 300 300 300

Contact US For Chrome Moly F5 Square Head Plug Instant Delivery And ASTM A182 F5 Forged Socket Weld Tee Pressure Rating Chart.

WERKSTOFF NR. 1.7362 Hex Plug Tolerance Formula

ASTM A182 F5 Forged Fittings American Standard Dimensional Tolerances
"A" - Threaded Center To BottomFor Size
1/8" And 1/4"
± 0.03"
3/8", 1/2" And 3/4"± 0.06"
1", 1-1/4", 1-1/2" And 2"± 0.08"
2-1/2", 3", And 4"± 0.10"
"B" - Threaded Bore DiameterFor Size
1-1/2" And Smaller
+ 0.020"
- 0.000"
2", 2-1/2", 3" And 4"+ 0.025"
- 0.000"
"C" - Threaded Wall Thick.Min. = 1.09 T (But Not Less Than 5/32")
T = Wall Thickness Of Nominal Pipe Sizes
"D" - Bore Diameter Of Pipe FittingFor Size
2" And Smaller
± 0.030"
2-1/2", 3" And 4"± 0.060"
"E" - Threadeds- Bottom To Bottom - Full CouplingsFor Size
1/8" And 1/4"
± 0.06"
3/8", 1/2" And 3/4"± 0.12"
1", 1-1/4", 1-1/2" And 2"± 0.16"
2-1/2", 3", And 4"± 0.20"
"F" - Bottom Of Threaded To Opposite Face - ANSI B16.11 Half CouplingsFor Size
1/8" And 1/4"
± 0.03"
3/8", 1/2" And 3/4"± 0.06"
1", 1-1/4", 1-1/2" And 2"± 0.08"
2-1/2", 3", And 4"± 0.10"
"G" - Gap Of WeldingApprox. 0.06"
Before Welding Recommended Gap
"H" - Min. FlatMin. Flat = 0.75 X Min.
Threaded Wall Thick.

Available In A Wide Range Types Of ASTM A182 F5 Forged Fittings

Alloy Steel F5 Forged 90 Degree Elbow

Alloy Steel F5 Forged 90 Degree Elbow

ASME SA182 F5 Threaded / Screwed Hex Plug

ASME SA182 F5 Threaded / Screwed Hex Plug

ASTM A182 Gr F5 Threaded Street Elbow

ASTM A182 Gr F5 Threaded Street Elbow

Alloy Steel A182 F5 Socket Weld Cap

Alloy Steel A182 F5 Socket Weld Cap

ASTM A182 Grade F5 Screwed Union

ASTM A182 Grade F5 Screwed Union

Alloy Steel Gr F5 Threaded Pipe Nipple

Alloy Steel Gr F5 Threaded Pipe Nipple

F5 Alloy Steel Socket Weld Half Coupling

F5 Alloy Steel Socket Weld Half Coupling

SA182 F5 Alloy Steel Forged 45 Degree Elbow

SA182 F5 Alloy Steel Forged 45 Degree Elbow

ASTM A182 F5 Forged Socket Weld Tee

ASTM A182 F5 Forged Socket Weld Tee

ASTM A182 Gr F5 Socket Weld Full Coupling

ASTM A182 Gr F5 Socket Weld Full Coupling

Alloy Steel F5 Threaded / Screwed Bushing

Alloy Steel F5 Threaded / Screwed Bushing

AS A182 Gr. F5 Forged Socket Weld Cross

AS A182 Gr. F5 Forged Socket Weld Cross

ASTM A182 Alloy Steel F5 Forged Boss

ASTM A182 Alloy Steel F5 Forged Boss

ASTM A182 F5 Forged 45 Degree Lateral Tee

ASTM A182 F5 Forged 45 Degree Lateral Tee

Chrome Moly F5 Forged Square Head Plug

Chrome Moly F5 Forged Square Head Plug

ASTM A182 F5 Forged Swage Nipple

ASTM A182 F5 Forged Swage Nipple


We Supplied A Comprehensive Range Of ASTM A182 F5 Forged Fittings To The Following Countries

ASTM A182 F5 Elbow United Arab Emirates (UAE), Norway, Malaysia, Turkey
A182 F5 Threaded Fittings Dammam -KSA, Indonesia, Belgium, Philippines.
ASTM A182 F5 Forged Fittings Canada, Singapore, Malaysia, Philippines
Alloy Steel F5 Fittings Japan, Europe, Romania, Malaysia
SA182 F5 Socket Weld Outlet Colombia, Malaysia, Sweden, China
ASTM A182 F5 Fittings Dubai, Netherlands, Russia, Malaysia
Alloy Steel F5 Union South Africa, Saudi Arabia (KSA), Kuwait, Brazil
SA182 F5 Socket Weld Hex Plug Philippines, Nigeria, Australia, UK
Alloy Steel A182 F5 Forged Fittings Oman, Malaysia, Hong Kong, UAE
Chrome Moly A182 Gr F5 Fittings South Africa, Bahrain, Singapore
A182 Grade F5 Screwed Bushing France, Thailand, Europe, Qatar
Chrome Moly F5 Square Head Plug Germany, Czechia, Malaysia, Thailand
ASTM A182 F5 Forged Socket Weld Tee Finland, Malaysia, USA, Bangladesh
ASTM A182 Gr F5 Threaded Street Elbow Italy, Iran, Chile, Singapore
F5 Alloy Steel Socket Weld Half Coupling Egypt, Spain, UK, Mexico


About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Rajtilak Metal © 2021 All Right Reserved. Website Designed And SEO by Mesotek
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy