ASTM A182 F11 Flanges

SA 182 gr F11 Slip on, Blind and Alloy Steel A182 F11 material manufacturer in India.

ASTM A182 F11 Flanges

ASTM A182 F11 Flanges

Alloy Steel F11 Class 2 Flanges

Alloy Steel F11 Class 2 Flanges

SA182 F11 Weld Neck Flanges

SA182 F11 Weld Neck Flanges

Table Of Contents


ASTM A182 F11 Flanges Are Made Up Of A Chromium Molybdenum Alloy?

ASTM A182 F11 Flanges are made up of a chromium molybdenum alloy consisting chromium in a range of 20% to 40% depending on the grading. A182 F11 material solid solution annealed and therefore withstands temperatures up to 1010 degrees Celsius. The high chromium mixture enables ASTM A182 F11 Flanges to be heat resistant and corrosion resistant in higher temperatures. The A182 F11 Flanges are also very strong due to the annealing of them. ASTM A182 Grade F11 Flanges can be supplied in either normalized or quenched and tempered conditions.


ASTM A182 F11 Flanges


Alloy Steel F11 Flanges Can Be Applied In High Pressure Systems?

ASTM A182 F11 Flanges are made from forged stainless steel. They can be applied in high pressure systems due to their high strength, ductility and corrosion resistance. SA 182 Gr F11 Steel Flanges are specifically resistant to sulfuric acid corrosion. Alloy Steel ASTM A182 F11 Flanges are welded neck flanges that offer extra tightness and safety in high pressure piping. AS A182 F11 RTJ Flanges alike can be used to tighten two pipes together without leakage with a gasket in the middle to seal the gaps completely. These are very resistant to chloride ion corrosion cracking as well; meaning they could be applied in chloride rich environments without compromising the integrity of the system.


What Is SA182 F11 Blind Flanges?

A182 F11 Alloy Steel Blind Flanges can be applied to seal the end of a pipeline to be opened and closed as needed. A182 F11 Steel Slip On Flanges allow the pipes to be slipped through them so that the bending stress cracking can be avoided. Due to the specialties of the ASTM A182 F11 Flanges they are used in various applications. Applications include chemical equipment, pharmaceuticals, gas processing plants, power generation tools, petrochemical industry, pulp and paper industry, on shore and offshore marine equipment, oil rigs, oil refineries, under water equipment, water desalination plants, condensers, heat exchangers and others.


A182 F11 Class 2 Equivalent

Material Name Type Of UNS Number Forging Specification Casting Specification Equivalent DIN DIN W. Number Application
Alloy Steel Chrome Moly 1.1/4Cr-1/2Mo K11572 A182-F11 cl2 A217-WC6 13CRM044 1.7335 Up to 593ºC (1100ºF)

Refer A182 F11 Weld Neck Flange Specification And Accept Small And Large Quantities SA182 F11 Class 1 and Cl2 Flanges With Low Price.


ASTM A182 F11 Specification

Material Specification Of : ASTM A182 F11 Flanges
Flanges Standards EN 1092-1, JIS, ASME B16.5, ASME B16.47 type A, UNI, DIN
Pressure Rating Class 150 To Class 2500
High Temperature Above 200°C (400°F) For Class 150 Or Above 400°C (750°F)
Low Temperature Above -29 Degree C (−20°F)
Common Types Of Flanges: Slip On (SORF), Weld Neck (WNRF), Blind (BLRF), Lap Joint (Loose), Threaded (NPT), Socket-Weld (SWRF)
Special Types Of Flanges : Nipoflange, Elboflange, Latroflange, Swivel Flange, Expanding Flange, Reducing Flange, Weldoflange
Standard Cover : pressure ratings & temperature ratings, materials, marking, dimensions, weight, tolerances, testing
Contact Faces RTJ (Ring Type Joint), FF (Flat Face), RF (Raised Face), T/G (Tongue And Groove ), M/F (Male And Female)
Size Chart Normal Pipe Size 1/2 to NPS 24"
Thickness Normal Pipe Size ≤ 18
Bore Diameter Normal Pipe ≤ 10
Marking Standard Name of Manufacturer
Schedule
Type of Flange Facing
Nominal Pipe Size
Pressure Class
ASME B16 Designation
Bolt Type high strength bolts
medium strength bolts
low strength bolts
European Standard Flanges JIS B2220 Flanges (5k to 30k) and KS1503 flanges
Russian-Standard Flanges GOST 12820 / 12821-80, DIN, UNI, EN 1092-1
South African Standard Flanges SANSflanges And SABS flanges
Surface Finish smooth, concentric serrated, stock
Gaskets Types Full Face Gasket
Flat Ring Gasket
Metallic Ring Gakset
Advantages Of Pipe Flange Used to Connect Pipe System
Easy Repair Pipe System
Assembled Without Welding

View A182 F11 Temperature Range And What Is A182 F11 Material?, ASME A182 F11 Blind Flanges Dimensions Chart According to ASME B16.5.


A182 F11 Alloy Steel Flanges Pressure Chart

ASTM A182 F11 Flanges Pressure Rating Chart
Temperature °F 150# 300# 400# 600# 900# 1500# 2500#
-20 to 100 275 720 960 1440 2160 3600 6000
200 230 600 800 1200 1800 3000 5000
300 205 540 720 1080 1620 2700 4500
400 190 495 660 995 1490 2485 4140
500 170 465 620 930 1395 2330 3880
600 140 435 580 875 1310 2185 3640
650 125 430 575 860 1290 2150 3580
700 110 425 565 850 1275 2125 3540
750 95 415 555 830 1245 2075 3460
800 80 405 540 805 1210 2015 3360
850 65 395 530 790 1190 1980 3300
900 50 390 520 780 1165 1945 3240
950 35 380 510 765 1145 1910 3180
1000 20 320 430 640 965 1605 2675
1050 20 310 410 615 925 1545 2570
1100 20 255 345 515 770 1285 2145
1150 20 200 265 400 595 995 1655
1200 20 155 205 310 465 770 1285
1250 20 115 150 225 340 565 945
1300 20 85 115 170 255 430 715
1350 20 60 80 125 185 310 515
1400 20 50 65 95 145 240 400
1450 15 35 45 70 105 170 285
1500 10 25 35 55 80 135 230

A182 F11 Class 3 Dimensions Chart

A182 F11 Class 3 Dimensions Chart


NPS O.D. of Flange Flanges Thickness Diameter of RF Diameter of Hub at Base Lengtd Tdru Hub Bore or Diameter Dia. of Hub at Bevel Radius of Fillet Deptd of Socket
Welding (WN) Neck Slip-On (SORF) Threaded (NPT) Socket (SWRF) Lap Joint (Loose) Slip-on (SORF) Socket (SWRF) Lap Joint (Loose)
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2

Best Deals On Bulk Procurement Of Alloy Steel F11 Slip On Flanges In Mumbai, India, ASTM A182 GR F11 Weld Neck Flange Maximum Weight.

ASTM A182 F11 Class 2 Schedule Chart

Nominal Pipe Sizes (NPS) Slip On (SORF) Threaded (NPT) Socket Weld (SWRF) Lap Joint (Loose) Blind (BLRF) Weld Neck (WRNR)
½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
3 3 3 3 4 4
2 5 5 5 5 5 6
8 8 8 8 7 10
3 9 9 9 9 9 11.5
11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268

Pressure Rating Formula Of A182 F11 Cl2 Plate Flange And Special Price for Alloy Steel A182 Forged Flanges In Mumbai, India.

ASME Sa-182 F11 Cl.2 Thickness Chart In MM

ASTM A182 F11 Flanges Wall Thickness
NPS (Normal Pipe Sizes) Outside Daimeter (O.D.) Schedule 10 Schedule 20 Schedule 30 STD Wall Schedule 40 Schedule 60 EXT Hvy Schedule 80 Schedule 100 Schedule 120 Schedule 140 Schedule 160 XX Hvy
½ 0.84 0.083 ... ... 0.109 0.109 ... 0.147 0.147 ... ... ... 0.188 0.294
¾ 1.05 0.083 ... ... 0.113 0.113 ... 0.154 0.154 ... ... ... 0.219 0.308
1 1.315 0.109 ... ... 0.133 0.133 ... 0.179 0.179 ... ... ... 0.25 0.358
1 ¼ 1.66 0.109 ... ... 0.14 0.14 ... 0.191 0.191 ... ... ... 0.25 0.382
1 ½ 1.9 0.109 ... ... 0.145 0.145 ... 0.2 0.2 ... ... ... 0.281 0.4
2 2.375 0.109 ... ... 0.154 0.154 ... 0.218 0.218 ... ... ... 0.344 0.436
2 ½ 2.875 0.12 ... ... 0.203 0.203 ... 0.276 0.276 ... ... ... 0.375 0.552
3 3.5 0.12 ... ... 0.216 0.216 ... 0.3 0.3 ... ... ... 0.438 0.6
3 ½ 4 0.12 ... ... 0.226 0.226 ... 0.318 0.318 ... ... ... ... 0.636
4 4.5 0.12 ... ... 0.237 0.237 ... 0.337 0.337 ... 0.438 ... 0.531 0.674
5 5.563 0.134 ... ... 0.258 0.258 ... 0.375 0.375 ... 0.5 ... 0.625 0.75
6 6.625 0.134 ... ... 0.28 0.28 ... 0.432 0.432 ... 0.562 ... 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 ...
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 ...
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 ...
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 ...
22 22 0.25 ... ... 0.375 ... ... 0.5 ... ... .... .... .... ....
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 ....
26 26 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
30 30 0.312 0.5 0.625 0.375 .... .... 0.5 .... .... .... .... .... ....
36 36 0.312 0.5 0.625 0.375 0.75 .... 0.5 .... .... .... .... .... ....
40 40 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
42 42 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..
48 48 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..

Tolerance Chart Of ASTM A182 Grade F11 Class 2 (UNS K11572)

ASTM A182 F11 FlangesTolerance
A Outside Diameter (O.D.)
  • When Outside Diameter (O.D.) is 24" or less: ±1/16" (1.6 mm)
  • When Outside Diameter (O.D.) is over 24": ±1/8" (3.2 mm)
D Inside Diameter
  • 10" and smaller: ±1/32" (0.8 millimeter)
  • 12" thru 18": +1/8" (3.2 millimeter)
  • 20" and larger: -1/16" (1.6 millimeter)
B Diameter of contact face
  • 1/16" raised face: ±1/32" (0.8 millimeter)
  • 1/4" Raised Face (RF), Tongue & Groove (T/G), (male & female), (m/f): ±1/64" (0.4 mm)
J Diameter of hub at base
  • When hub base is 24" or smaller: ±1/16" (1.6 millimeter)
  • When hub base is over 24": ±1/8" (3.2 millimeter)
H Diameter of hub at point of welding
  • 5" and smaller: +3/32" (2.4 millimeter), -1/32" (0.8 millimeter)
  • 6" and larger: +5/32" (4.0 millimeter), -1/32 (0.8 millimeter)
P Drilling
  • Bolt circle: ±1/16" (1.6 millimeter)
  • Bolt hole spacing: ±1/32" (0.8 millimeter)
  Eccentricity of bolt circle with respect to facing
  • 2 1/2" and smaller ±1/32" (0.8 millimeter) max.
  • 3" and larger ±1/16" (1.6 millimeter) max.
C Thickness
  • 18" and smaller: ±1/8" (3.2 millimeter), -0"
  • 20" and larger: ±3/16" (4.8 millimeter), -0"
K Length of hub
  • 10" and smaller: ±1/16" (1.6 millimeter)
  • 12" and larger: ±1/8" (3.2 millimeter)

A182 F11 Class 1 Vs Class 2 Stud Bolt Size Chart

Class 150 Flanges Class 300 Flanges Class 600 Flanges
NPS # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length
1/16 RF RTJ 1/16 RF RTJ 1/4 RF RTJ
1/2 4 0.50 2-1/4 4 0.50 2-1/2 3 4 0.50 3 3
3/4 4 0.50 2-1/2 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1 4 0.50 2-1/2 3 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1-1/4 4 0.50 2-3/4 3-1/4 4 0.63 3-1/4 3-3/4 4 0.63 3-3/4 3-3/4
1-1/2 4 0.50 2-3/4 3-1/4 4 0.75 3-1/2 4 4 0.75 4-1/4 4-1/4
2 4 0.63 3-1/4 3-3/4 8 0.63 3-1/2 4 8 0.63 4-1/4 4-1/4
2-1/2 4 0.63 3-1/2 4 8 0.75 4 4-1/2 8 0.75 4-3/4 4-3/4
3 4 0.63 3-1/2 4 8 0.75 4-1/4 4-3/4 8 0.75 5 5
3-1/2 8 0.63 3-1/2 4 8 0.75 4-1/4 5 8 0.88 5-1/2 5-1/2
4 8 0.63 3-1/2 4 8 0.75 4-1/2 5 8 0.88 5-3/4 5-3/4
5 8 0.75 3-3/4 4-1/4 8 0.75 4-3/4 5-1/4 8 1.00 6-1/2 6-1/2
6 8 0.75 4 4-1/2 12 0.75 4-3/4 5-1/2 12 1.00 6-3/4 6-3/4
8 8 0.75 4-1/4 4-3/4 12 0.88 5-1/2 6 12 1.13 7-1/2 7-3/4
10 12 0.88 4-1/2 5 16 1.00 6-1/4 6-3/4 16 1.25 8-1/2 8-1/2
12 12 0.88 4-3/4 5-1/4 16 1.13 6-3/4 7-1/4 20 1.25 8-3/4 8-3/4
14 12 1.00 5-1/4 5-3/4 20 1.13 7 7-1/2 20 1.38 9-1/4 9-1/4
16 16 1.00 5-1/4 5-3/4 20 1.25 7-1/2 8 20 1.50 10 10
18 16 1.13 5-3/4 6-1/4 24 1.25 7-3/4 8-1/4 20 1.63 10-3/4 10-3/4
20 20 1.13 6-1/4 6-3/4 24 1.25 8 8-3/4 24 1.63 11-1/4 11-1/2
24 20 1.25 6-3/4 7-1/4 24 1.50 9 10 24 1.88 13 13-1/4

A182 F11 P Number

P# G# ISO Specification Type Of UNS Number KSI(MPa) Product Form
4 1 5.1 A/SA-182 F11, CL.1 K11597 60(415) Forgings
4 1 5.1 A/SA-182 F11, CL.2 k11572 70(485) Forgings
4 1 5.1 A/SA-182 F11, CL.3 k11572 75(515) Forgings

Difference Between A182 F11 VS A105

  • A182 F11 are made up of a chromium molybdenum alloy consisting chromium in a range of 20% to 40% depending on the grading.

  • A105 Flange is a forged carbon steel. These are widely used in the market for non-critical applications. The heat treatment makes the Ansi A105 Flanges much harder and stronger.


SA 182 F11 Chemical Composition

Gr. C Mn Si S P Cr Mo
ASTM A182 F11 Flanges 0.05 - 0.15 0.3 - 0.6 0.5 - 1 0.03 0.03 1 - 1.5 0.044 - 0.65

A182 F11 Mechanical Properties

Mechanical Properties Original Value Comments
Hardness, Brinell 143 - 207
Tensile Strength, Ultimate 485 MPa
Tensile Strength, Yield 275 MPa
Elongation at Break 20 % in 2 in. (50 millimeter)
Reduction of Area >= 30 %

We Supplying Types Of ASTM A182 F11 Flanges To Overseas Customers

1 Inch, CL600, ASTM A182 Grade F11 Slip On Flanges

1 Inch, CL600, ASTM A182 Grade F11 Slip On Flanges

8 Inch, 600 LB, SCH 80, ASME SA 182 Gr F11 Socket Weld Flanges

8 Inch, 600 LB, SCH 80, ASME SA 182 Gr F11 Socket Weld Flanges

DN150, Class 900, SCH 80, F11 Alloy Steel Blind Flanges

DN150, Class 900, SCH 80, F11 Alloy Steel Blind Flanges

6 Inch, SCH 40, 300#, A182 F11 Class 2 Weld Neck Flanges

6 Inch, SCH 40, 300#, A182 F11 Class 2 Weld Neck Flanges

2 Inch x NPTF 1-1/2 Inch, RF, ASTM A182 F11 Plate Flanges

2 Inch x NPTF 1-1/2 Inch, RF, ASTM A182 F11 Plate Flanges

8 Inch, 300 LB, FF, ASTM A182 Gr F11 Ring Type Joint Flanges

8 Inch, 300 LB, FF, ASTM A182 Gr F11 Ring Type Joint Flanges

2 Inch, Class 600, ASTM A182 Grade F11 Tongue & Groove Flanges

2 Inch, Class 600, ASTM A182 Grade F11 Tongue & Groove Flanges

1/2 Inch, 150 LB, RF, SA 182 Gr F11 Reducing Flanges

1/2 Inch, 150 LB, RF, SA 182 Gr F11 Reducing Flanges

10 Inch, 600#, SA182 F11 Cl1 Threaded Flanges

10 Inch, 600#, SA182 F11 Cl1 Threaded Flanges

2 1/2 Inch, 150#, ASTM A182 F11 Cl.2 Lap Joint Flanges

2 1/2 Inch, 150#, ASTM A182 F11 Cl.2 Lap Joint Flanges

1 Inch, SCH 40, Class 300, A182 F11 Alloy Steel Long Weld Neck Flanges

1 Inch, SCH 40, Class 300, A182 F11 Alloy Steel Long Weld Neck Flanges

2 Inch, Class 150, ASTM A182 Gr F11 Spectacle Blind Flanges

2 Inch, Class 150, ASTM A182 Gr F11 Spectacle Blind Flanges

Class 900, 16 Inch, FF, Low Alloy Steel F5 Square Flange

Class 900, 16 Inch, FF, Low Alloy Steel F5 Square Flange

30 Inch, 300 LB, FF, Alloy Steel F11 High hub Blind Flange

30 Inch, 300 LB, FF, Alloy Steel F11 High hub Blind Flange

2 Inch, Class 600, SA 182 Gr F11 Steel Orifice Flanges

2 Inch, Class 600, SA 182 Gr F11 Steel Orifice Flanges

2 Inch, Class 300, Alloy Steel A182 Grade F11 Puddle Flange

2 Inch, Class 300, Alloy Steel A182 Grade F11 Puddle Flange

2 Inch, Class 600, ANSI B16.5, A182 F11 Steel Expander Flange

2 Inch, Class 600, ANSI B16.5, A182 F11 Steel Expander Flange

1 Inch, SCH 40, Class 300, RF Ends, ASME SA 182 Gr F11 Flat Flange

1 Inch, SCH 40, Class 300, RF Ends, ASME SA 182 Gr F11 Flat Flange


Locations We Have Supplied Recently:

ASTM A182 F11 Flanges Bahrain, South Africa, Singapore
Alloy Steel F11 Flanges Thailand, France, Europe, Qatar
A182 F11 Steel Orifice Flanges Europe, UAE, United Kingdom -UK, Malaysia
SA182 F11 Blind Flanges Australia, Philippines, Nigeria, UK
A182 F11 Material Hong Kong, Oman, Malaysia, UAE
ASTM A182 F11 Sip On Flanges Malaysia, USA, Finland, Bangladesh
SA182 F11 Cl1 Long Weld Neck Flanges Poland, Canada, Ellington -United States, UK
A182 Grade F11 Square Flange Malaysia, Japan, Europe, Romania
A182 F11 Class 2 Flat Flange Czechia, Malaysia, Germany, Thailand
SA182 Chrome Moly F11 Weld Neck Flanges Chile, Italy, Iran, Singapore
SA182 Gr F11 Socket Weld Flages Norway, Malaysia, United Arab Emirates (UAE), Turkey
A182 Grade F11 Reducing Flanges Indonesia, Belgium, Dammam -KSA, Philippines.
Alloy Steel F11 Spectacle Blind Flanges Malaysia, Philippines, Canada, Singapore
SA 182 Gr F11 Threaded Flanges UK, Mexico, Egypt, Spain


About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy