Short Radius Elbow
Check Stainless Steel Short Radius Elbow Weight Chart And ANSI B16.9 SR Elbows Equivalent Length.
What Is Short Radius Elbow?
Short Radius Elbow as the name indicates is an elbow with a shorter radius, often less than 1.5 times the nominal diameter of the piping. ASME B16.9 Short Radius Elbow excerpts higher pressure on the curvature but is useful in systems where space is a concern and the pressure levels are low. ASME B16.9 Short Radius Elbow Dimensions depend on the need of the application. They range up to 48 inches in the nominal diameter. ASME B16.9 Short Radius Elbow Weight depends on the dimensions and the material it is made. SR Bw Elbow is a buttweld elbow which is stronger.
ASME B16.9 Short Radius Elbow
Stainless Steel Short Radius Elbow
Carbon Steel Short Radius Elbow
Table of contents
- What Is The Radius Of A Short Radius Elbow?
- When To Use Short Radius Elbow?
- Difference Between Short And Long Radius Elbow?
- Pressure Drop Through Short Radius Elbow
- Carbon Steel Short Radius Elbow Price
- SR Elbow Specification
- Stainless Steel Short Radius Elbow Dimensions
- Short Radius 45 Degree Elbow Dimensions
- 90 Degree Short Radius Elbow Dimensions
- 180 Degree Short Radius Elbow Dimensions
- Short Radius SS Elbow Weight Chart
- Sch 160 Buttweld Short Radius Elbow Tolerances
- Short Radius Return Bend Dimensions
What Is The Radius Of A Short Radius Elbow?
The middle to face area for a "long" radius elbow, abbreviated LR always is "1.1/2 x Nominal Pipe Size (NPS) (1.1/2D)", while the center to face distance for a "short" radius elbow, abbreviated Short Radius even is to nominal pipe size.
When To Use Short Radius Elbow?
Short Radius Grooved Elbow is a different type which has grooves at the end for gasket connection. Short Radius Elbow Stainless Steel makes a high strength connection due to the material’s strength. Short Radius Sweep Elbow is a special type that it is used to basically sweep the pipeline by reducing the diameter and increase the velocity of the fluid flow so that the fluids don’t make deposits inside the system. Short Radius Bend Elbow is a common term used for short radius elbows. Short Radius Elbow Material differs according to the requirements of them in applications.
Difference Between Short And Long Radius Elbow?
- Short Radius Grooved Elbows is a different type which has grooves at the end for gasket connection. Short Radius Elbows Stainless Steel makes a high strength connection due to the material’s strength. Short Radius Sweep Elbows is a special type that it is used to basically sweep the pipeline by reducing the diameter and increase the velocity of the fluid flow so that the fluids don’t make deposits inside the system.
- Long Radius Bend Elbows can be made from different Long Radius Elbows Material as needed. The different classes such as Schedule 10 Long Radius Elbow and the different material makes such as the Long Radius Stainless Steel Elbow are application specific.
PDO approved Manufacturer Of Carbon Steel Short Radius Elbow In India Available In A Wide Range Of Grades / Shapes / Sizes And Schedule.
Pressure Drop Through Short Radius Elbow
| Types Of Fittings | (L/D)eq | |
|---|---|---|
| 90 Deg Elbow Curved, Threaded | Standard Radius (R/D = 1) | 30 |
| LR (R/D = 1.5) | 16 | |
| 90° Elbow Curved, Flanged/Welded | Standard Radius (R/D = 1) | 20 |
| Long Radius (R/D = 2) | 17 | |
| Long Radius (R/D = 4) | 14 | |
| Long Radius (R/D = 6) | 12 | |
| 90° Elbow Mitered | 1 weld (90 Deg) | 60 |
| 2 welds (45 Deg) | 15 | |
| 3 welds (30 Deg) | 8 | |
| 45 Deg Elbow Curved. Threaded | Standard Radius (R/D = 1) | 16 |
| Long Radius (R/D = 1.5) | ||
| 45 Deg Elbow Mitered | 1 weld 45 Deg | 15 |
| 2 welds 22.5 Deg | 6 | |
| 180 Deg Bend | threaded, close-return (R/D = 1) | 50 |
| flanged (R/D = 1) | ||
| all types (R/D = 1.5) | ||
| Tee Through-branch as an Elbow | threaded (r/D = 1) | 60 |
| threaded (r/D = 1.5) | ||
| flanged (r/D = 1) | 20 | |
| stub-in branch | ||
| Tee Run-through | threaded (r/D = 1) | 20 |
| flanged (r/D = 1) | ||
| stub-in branch | ||
| Angle valve | 45 Deg, full line size, β = 1 | 55 |
| 90 Deg full line size, β = 1 | 150 | |
| Globe valve | standard, β = 1 | 340 |
| Plug valve | branch flow | 90 |
| straight through | 18 | |
| three-way (flow through) | 30 | |
| Gate valve | standard, β = 1 | 8 |
| Ball valve | standard, β = 1 | 3 |
| Diaphragm | dam type | |
| Swing check valve | Vmin = 35 [ρ (lbm/ft^3)]-1/2 | 100 |
| Lift check valve | Vmin = 40 [ρ (lbm/ft3)]-1/2 | 600 |
| Hose Coupling | Simple, Full Bore | 5 |
Difference Between Short Radius Elbow Vs Long Radius, View Schedule 40 SR Buttweld Elbows Center Formula.
The ANSI B16.9 Short Radius Elbow can be connected in various methods. The ASME Short Radius Elbow could be welded, bolted or screwed depending on the nature of the application. Stainless Steel Short Radius Elbow 1.5d means the curvature of the elbow is less than 1.5 times its bore diameter. For welding purposes, the Short Radius Weld Elbow is used. The sizes vary according to application. The 10 Inch Short Radius Elbow can be used with a 10 inch piping whereas the 12 Inch Short Radius Elbow can be used in a 12 inch piping. There are reducing elbows which have different diameters at each end.
The Carbon Steel Short Radius Elbow Pipe Fittings are common and are available in different degrees of curvature. The 90 Degree Short Radius Pipe Elbow has a 90 degree curvature and transfers the fluid flow in a perpendicular direction. The different schedules such as the Short Radius Elbow Sch 40 and the Short Radius Elbow Sch 80 indicate the difference in mechanical properties.
Carbon Steel Short Radius Elbow Price
Type Of Elbow |
Size |
Price In India |
SR |
Elbow 90 Deg, Short Radius STD 1 1/ 2" |
450.35 |
SR |
Elbow 90 Deg, Short Radius STD 2" |
360.28 |
SR |
Elbow 90 Deg, Short Radius STD 2 1/2" |
720.57 |
SR |
Elbow 90 Deg, Short Radius STD 3" |
1170.92 |
SR |
Elbow 90 Deg, Short Radius STD 4" |
2071.63 |
SR |
Elbow 90 Deg, Short Radius STD 5" |
3242.55 |
SR |
Elbow 90 Deg, Short Radius STD 6" |
5314.18 |
SR |
Elbow 90 Deg, Short Radius STD 8" |
9907.79 |
SR |
Elbow 90 Deg, Short Radius STD 10" |
20716.28 |
Please note this is an approx Price of 90 degree short radius elbow in India. For final 45 degree short radius elbow Price List Please Call on 91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.
SR Elbow Specification
| Specification: | ASME B16.9 Short Radius Elbow |
| Connection Type | Threaded/ Clamp End / End Bell / Weld/ Flange/ |
| Pressure-Temperature Class | 150LB, 300LB, 600LB, 1500LB, 2500LB. |
| Standard | EN, ISO, DIN, JIS, NPT |
| Type | Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross, |
| Thickness: | Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc. |
| Type Of Dimension: | BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313 |
| Schedule: | Schedule 5 TO Schedule XXS. |
| Size: | Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48” |
| Materials: | Chrome-molybdenum, Nickel Alloys, Tantalum, Stainless Steel, Cupro-Nickel 90/10 & 70/30, Nickel, Inconel, Monel, Hastalloy, Alloy Steel, Brass, Bronze, Copper, Iron (Ductile/Cast), Carbon Steel, Titanium. |
| Type: | Butt Weld (BW), Seamless (SMLS) Welded |
Stainless Steel Short Radius Elbow Dimensions
| Normal Pipe Sizes | Outside Daimeter D |
Center to End A |
NPS (Normal Pipe Sizes) | O.D. (Outside Daimeter) D |
Center to End A |
| 1 | 33.4 | 25 | 8 | 219.1 | 203 |
| 1¼ | 42.2 | 32 | 10 | 273 | 254 |
| 1½ | 48.3 | 38 | 12 | 323.8 | 305 |
| 2 | 60.3 | 51 | 14 | 355.6 | 356 |
| 2½ | 73 | 64 | 16 | 406.4 | 406 |
| 3 | 88.9 | 76 | 18 | 457 | 457 |
| 3½ | 101.6 | 89 | 20 | 508 | 508 |
| 4 | 114.3 | 102 | 22 | 559 | 559 |
| 5 | 141.3 | 127 | 24 | 610 | 610 |
| 6 | 168.3 | 152 | - |
Short Radius 45 Degree Elbow Dimensions
| Normal Pipe Sizes | Outside Daimeter D |
45 deg Short Radius Center-to-End A |
45 deg 3D Center-to-End A |
| 1/2 | 21.3 | 38 | - |
| 3/4 | 26.7 | 38 | 57 |
| 1 | 33.4 | 38 | 76 |
| 1¼ | 42.2 | 48 | 95 |
| 1½ | 48.3 | 57 | 114 |
| 2 | 60.3 | 76 | 152 |
| 2½ | 73 | 95 | 190 |
| 3 | 88.9 | 114 | 229 |
| 3½ | 101.6 | 133 | 267 |
| 4 | 114.3 | 152 | 305 |
| 5 | 141.3 | 190 | 381 |
| 6 | 168.3 | 229 | 457 |
| 8 | 219.1 | 305 | 610 |
| 10 | 273 | 381 | 762 |
| 12 | 323.8 | 457 | 914 |
| 14 | 355.6 | 533 | 1067 |
| 16 | 406.4 | 610 | 1219 |
| 18 | 457 | 686 | 1372 |
| 20 | 508 | 762 | 1524 |
| 22 | 559 | 838 | 1676 |
| 24 | 610 | 914 | 1829 |
| 26 | 660 | 991 | 1981 |
| 28 | 711 | 1067 | 2134 |
| 30 | 762 | 1143 | 2286 |
| 32 | 813 | 1219 | 2438 |
| 34 | 864 | 1295 | 2591 |
| 36 | 914 | 1372 | 2743 |
| 38 | 965 | 1448 | 2896 |
| 40 | 1016 | 1524 | 3048 |
| 42 | 1067 | 1600 | 3200 |
| 44 | 1118 | 1676 | 3353 |
| 46 | 1168 | 1753 | 3505 |
| 48 | 1219 | 1829 | 3658 |
90 Degree Short Radius Elbow Dimensions
| Normal Pipe Sizes | Outside Daimeter D |
Center-to-End A |
| 1 | 33.4 | 25 |
| 1¼ | 42.2 | 32 |
| 1½ | 48.3 | 38 |
| 2 | 60.3 | 51 |
| 2½ | 73 | 64 |
| 3 | 88.9 | 76 |
| 3½ | 101.6 | 89 |
| 4 | 114.3 | 102 |
| 5 | 141.3 | 127 |
| 6 | 168.3 | 152 |
| 8 | 219.1 | 203 |
| 10 | 273 | 254 |
| 12 | 323.8 | 305 |
| 14 | 355.6 | 356 |
| 16 | 406.4 | 406 |
| 18 | 457 | 457 |
| 20 | 508 | 508 |
| 22 | 559 | 559 |
| 24 | 610 | 610 |
180 Degree Short Radius Elbow Dimensions
| Normal Pipe Sizes | Outside Daimeter D |
180 Deg Short Radius | |
| Center to Center O |
Back to Face K |
||
| 1/2 | 21.3 | - | - |
| 3/4 | 26.7 | - | - |
| 1 | 33.4 | 51 | 41 |
| 1¼ | 42.2 | 64 | 52 |
| 1½ | 48.3 | 76 | 62 |
| 2 | 60.3 | 102 | 81 |
| 2½ | 73 | 127 | 100 |
| 3 | 88.9 | 152 | 121 |
| 3½ | 101.6 | 178 | 140 |
| 4 | 114.3 | 203 | 159 |
| 5 | 141.3 | 254 | 197 |
| 6 | 168.3 | 305 | 237 |
| 8 | 219.1 | 406 | 313 |
| 10 | 273 | 508 | 391 |
| 12 | 323.8 | 610 | 467 |
| 14 | 355.6 | 711 | 533 |
| 16 | 406.4 | 813 | 610 |
| 18 | 457 | 914 | 686 |
| 20 | 508 | 1016 | 762 |
| 22 | 559 | 1118 | 838 |
| 24 | 610 | 1219 | 914 |
SABIC Approved Copper / Ductile Iron / Alloy Steel / Aluminum Short Radius Elbow Manufacturer In India.
Short Radius SS Elbow Weight Chart
| Normal Pipe Sizes | LBS | Weight In KG |
| 1/2 | 0.18 | 0.08 |
| 3/4 | 0.19 | 0.09 |
| 1 | 0.4 | 0.18 |
| 1.1/4 | 0.6 | 0.27 |
| 1.1/2 | 0.9 | 0.41 |
| 2 | 1.6 | 0.73 |
| 2.1/2 | 3.25 | 1.47 |
| 3 | 5 | 2.27 |
| 3.1/2 | 6.75 | 3.06 |
| 4 | 9 | 4.08 |
| 5 | 15 | 6.8 |
| 6 | 24.5 | 11.11 |
| 8 | 50 | 22.68 |
| 10 | 88 | 39.92 |
| 12 | 125 | 56.7 |
| 14 | 160 | 72.57 |
| 16 | 206 | 93.44 |
| 18 | 260 | 117.93 |
| 20 | 320 | 145.15 |
| 22 | 394 | 178.72 |
| 24 | 460 | 208.65 |
| 26 | 550 | 249.48 |
| 30 | 734 | 332.94 |
| 36 | 1062 | 481.72 |
| NPS | LBS | KG |
Sch 160 Buttweld Short Radius Elbow Tolerances
| For all fittings | Elbows 180 deg/45 deg | 180 deg Returns | |||||
| Nominal Pipe Size | O.D. at Bevel | I.D. at End | Wall Thick. / t1 | Center to End Diameter A-B-C-M | Center to Center Diameter O | Back to Face Diameter K | Align- ment of Ends U |
| 1/2 a 2 1/2 | 1 | 0,8 | Not | 2 | 7 | 7 | 1 |
| 3 a 3 1/2 | 1 | 1,6 | less | 2 | 7 | 7 | 1 |
| 4 | +2 -1 | 1,6 | than | 2 | 7 | 7 | 1 |
| 5 a 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
| 8 | 2 | 1,6 | of nominal | 2 | 7 | 7 | 1 |
| 10 | +4 -3 | 3,2 | tickness | 2 | 7 | 7 | 2 |
| 12 a 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
| 20 a 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
| 26 a 30 | +7 -5 | 4,8 | 3 | ….. | ….. | ….. | |
| 32 a 48 | +7 -5 | 4,8 | 5 | ….. | ….. | ….. | |
Short Radius Return Bend Dimensions
| NSP In
inch. |
O.D.
m/m |
I.D.
m/m |
Thickness Of Wall
m/m |
Center To Center
(O) m/m |
Back To Face
(K) m/m |
Pipe Schedule | Approximate Weight
(in Pounds) |
|---|---|---|---|---|---|---|---|
| ½" | .84 | .622 | .109 | 3.00 | 1.88 | sch.40 | .32 |
| ¾" | 1.05 | .824 | .113 | 2.25 | 1.69 | sch.40 | .34 |
| 1" | 1.31 | 1.049 | .133 | 3.00 | 2.19 | sch.40 | .74 |
| 1¼" | 1.66 | 1.380 | .140 | 3.75 | 2.75 | sch.40 | 1.1 |
| 1½" | 1.90 | 1.610 | .145 | 4.50 | 3.25 | sch.40 | 1.6 |
| 2" | 2.38 | 2.067 | .154 | 6.00 | 4.19 | sch.40 | 3.2 |
| 2½" | 2.88 | 2.469 | .203 | 7.50 | 5.19 | sch.40 | 6.1 |
| 3" | 3.50 | 3.068 | .216 | 9.00 | 6.25 | sch.40 | 9.4 |
| 3½" | 4.00 | 3.548 | .226 | 10.50 | 7.25 | sch.40 | 12.8 |
| 4" | 4.50 | 4.026 | .237 | 12.00 | 8.25 | sch.40 | 17.5 |
| 5" | 5.56 | 5.047 | .258 | 15.00 | 10.31 | sch.40 | 29.3 |
| 6" | 6.63 | 6.065 | .280 | 18.00 | 12.31 | sch.40 | 47 |
| 8" | 8.63 | 7.981 | .322 | 24.00 | 16.31 | sch.40 | 87 |
| 10" | 10.75 | 10.020 | .365 | 30.00 | 20.38 | sch.40 | 164 |
| 12" | 12.75 | 12.000 | .375 | 36.00 | 24.38 | Standard Weight | 237 |
| 14" | 14.00 | 13.250 | .375 | 42.00 | 28.00 | sch.30 | 311 |
| 16" | 16.00 | 15.250 | .375 | 48.00 | 32.00 | sch.30 | 408 |
| 18" | 18.00 | 17.250 | .375 | 54.00 | 36.00 | Standard Weight | 514 |
| 20" | 20.00 | 19.250 | .375 | 60.00 | 40.00 | sch.20 | 636 |
| 22" | 22.00 | 21.250 | .375 | 66.00 | 44.00 | Standard Weight | 771 |
| 24" | 24.00 | 23.250 | .375 | 72.00 | 48.00 | sch.20 | 908 |
| 26" | 26.00 | 25.250 | .375 | 78.00 | 52.00 | Standard Weight | 1,191 |
| 30" | 30.00 | 29.250 | .375 | 90.00 | 60.00 | Standard Weight | 1,541 |
Check Schedule 80 90 Deg Short Radius Elbow Dimensions & Schedule 10 Short Radius 45 Degree Elbows Dimensions And Buttweld Short Radius Reducing Elbow Dimensions.
EN 10253-2 Elbow Dimensions (With Type A And Type B)
| DN | D | R | C | B – W – Z |
| 15 | 21.3 | 38 | 76 | 49 |
| 20 | 26.9 | 38 | 76 | 51 |
| 25 | 33.7 | 38 | 76 | 56 |
| 38 | 45 | 90 | 64 | |
| 32 | 42.4 | 48 | 96 | 69 |
| 40 | 48.3 | 57 | 114 | 82 |
| 51 | 63 | 126 | 88 | |
| 57 | 72 | 144 | 100 | |
| 50 | 60.3 | 76 | 152 | 106 |
| 70 | 92 | 184 | 127 | |
| 65 | 76.1 | 95 | 190 | 133 |
| 80 | 88.9 | 114 | 228 | 159 |
| 101.6 | 133 | 267 | 184 | |
| 108 | 142,5 | 285 | 196 | |
| 100 | 114.3 | 152 | 304 | 210 |
| 133 | 181 | 362 | 247 | |
| 125 | 139.7 | 190 | 380 | 260 |
| 159 | 216 | 432 | 295 | |
| 150 | 168.3 | 229 | 457 | 313 |
| 193.7 | 270 | 540 | 367 | |
| 200 | 219.1 | 305 | 610 | 414 |
| 244.5 | 340 | 680 | 462 | |
| 250 | 273 | 381 | 762 | 518 |
| 300 | 323.9 | 457 | 914 | 619 |
| 350 | 355.6 | 533 | 1 066 | 711 |
| 400 | 406.4 | 610 | 1 220 | 813 |
| 450 | 457 | 686 | 1 372 | 914 |
| 500 | 508 | 762 | 1 524 | 1 016 |
| 550 | 559 | 838 | 1 676 | 1 118 |
| 600 | 610 | 914 | 1 828 | 1 219 |
| 650 | 660 | 990 | 1 980 | 1 320 |
| 700 | 711 | 1 067 | 2 134 | 1 422 |
| 750 | 762 | 1 143 | 2 286 | 1 524 |
| 800 | 813 | 1 219 | 2 438 | 1 626 |
| 850 | 864 | 1 296 | 2 592 | 1 728 |
| 900 | 914 | 1 372 | 2 744 | 1 829 |
| 1 000 | 1 016 | 1 524 | 3 048 | 2 032 |
| 1 050 | 1 067 | 1 600 | 3 201 | 2 134 |
| 1 100 | 1 118 | 1 677 | 3 354 | 2 236 |
| 1 150 | 1 168 | 1 752 | 3 504 | 2 336 |
| 1 200 | 1 219 | 1 829 | 3 658 | 2 438 |
EN 10253-4 Elbow Dimensions
JIS B2312 Elbow Dimensions
| Nominal Pipe Sizes | Outside Daimeter | Center to End | 90 Deg Weight | 45 Deg Weight | ||||
| (Nominal Pipe Sizes) | 90 Deg (F) | 45 Deg (H) | Kilogram/PC | Kilogram/PC | ||||
| A | B | D | Long | Shot | Long | Long | Short | LONG |
| 15 | ½ | 21.7 | 38.1 | - | 15.8 | 0.08 | 0.05 | 0.04 |
| 20 | ¾ | 27.2 | 38.1 | - | 15.8 | 0.1 | 0.07 | 0.05 |
| 25 | 1 | 34 | 38.1 | 25.4 | 15.8 | 0.15 | 0.1 | 0.08 |
| 32 | 1¼ | 42.7 | 47.6 | 31.8 | 19.7 | 0.26 | 0.17 | 0.13 |
| 40 | 1½ | 48.6 | 57.2 | 38.1 | 23.7 | 0.35 | 0.24 | 0.18 |
| 50 | 2 | 60.5 | 76.2 | 50.8 | 31.6 | 0.64 | 0.43 | 0.32 |
| 65 | 2½ | 76.3 | 95.3 | 63.5 | 39.5 | 1.12 | 0.75 | 0.56 |
| 80 | 3 | 89.1 | 114.3 | 76.2 | 47.3 | 1.58 | 1.05 | 0.79 |
| 90 | 3½ | 101.6 | 133.4 | 88.9 | 55.3 | 2.17 | 1.45 | 1.09 |
| 100 | 4 | 114.3 | 152.4 | 101.6 | 63.1 | 2.91 | 1.94 | 1.46 |
| 125 | 5 | 139.8 | 190.5 | 127 | 78.9 | 4.49 | 2.99 | 2.25 |
| 150 | 6 | 165.2 | 228.6 | 152.4 | 94.7 | 7.09 | 4.73 | 3.55 |
| 200 | 8 | 216.3 | 304.8 | 203.2 | 126.3 | 14.4 | 9.61 | 7.2 |
| 250 | 10 | 267.4 | 381 | 254 | 157.8 | 25.4 | 16.9 | 12.7 |
| 300 | 12 | 318.5 | 457.2 | 304.8 | 189.4 | 38.1 | 25.4 | 19.05 |
| 350 | 14 | 355.6 | 533.4 | 355.6 | 220.9 | 56.7 | 37.8 | 28.35 |
| 400 | 16 | 406.4 | 609.6 | 406.4 | 252.5 | 74.3 | 49.5 | 37.15 |
| 450 | 18 | 457.2 | 685.8 | 457.2 | 284.1 | 94.2 | 62.8 | 47.1 |
| 500 | 20 | 508 | 762 | 508 | 315.6 | 116 | 77.7 | 58 |
| 550 | 22 | 558.8 | 838.2 | 558.8 | 347.2 | 141 | 94.1 | 70.5 |
| 600 | 24 | 609.6 | 914.4 | 609.6 | 378.7 | 168 | 112 | 84 |
| 650 | 26 | 660.4 | 990.6 | 660.4 | 410.3 | 198 | 132 | 99 |
| 700 | 28 | 711.2 | 1066.8 | 711.2 | 441.9 | 230 | 154 | 115 |
| 750 | 30 | 762 | 1143 | 762 | 473.4 | 264 | 176 | 132 |
| 800 | 32 | 812.8 | 1219.2 | 812.8 | 505 | 301 | 201 | 150.5 |
| 850 | 34 | 863.6 | 1295.4 | 863.6 | 536.6 | 340 | 227 | 170 |
| 900 | 36 | 914.4 | 1371.6 | 914.4 | 568.1 | 380 | 253 | 190 |
| 950 | 38 | 965.2 | 1447.8 | 965.2 | 599.7 | 425 | 283 | 212.5 |
| 1000 | 40 | 1016 | 1524 | 1016 | 631.2 | 471 | 314 | 235.5 |
| 1050 | 42 | 1066.8 | 1600.2 | 1066.8 | 662.8 | 518 | 346 | 259 |
| 1100 | 44 | 1117.6 | 1676.4 | 1117.6 | 694.4 | 570 | 380 | 285 |
| 1150 | 46 | 1168.4 | 1752.6 | 1168.4 | 725.9 | 623 | 415 | 311.5 |
| 1200 | 48 | 1219.2 | 1828.8 | 1219.2 | 757.5 | 677 | 452 | 338.5 |
JIS B2313 Elbow Dimensions
DIN 2605 Elbow Dimensions
| WDR | |||||||
| 3 | 4 | 5 | |||||
| DN1 | d1 | s | s | s | BA | r | b |
| 2 | 17.5 | 28 | |||||
| 15 | 21.3 | 2.0 | 3.2 | 4.0 | 3 | 28.0 | 38 |
| 5 | 42.5 | 53 | |||||
| 2 | 25.0 | 39 | |||||
| 20 | 26.9 | 2.3 | 3.2 | 4.0 | 3 | 29.0 | 43 |
| 5 | 57.5 | 71 | |||||
| 2 | 25.0 | 42 | |||||
| 25 | 33.7 | 2.6 | 3.2 | 4.0 | 3 | 38.0 | 56 |
| 5 | 72.5 | 90 | |||||
| 2 | 32.0 | 53 | |||||
| 32 | 42.4 | 2.6 | 3.6 | 4.0 | 3 | 48.0 | 69 |
| 5 | 92.5 | 114 | |||||
| 2 | 38.0 | 62 | |||||
| 40 | 48.3 | 2.6 | 4.0 | 5.0 | 3 | 57.0 | 82 |
| 5 | 107.5 | 132 | |||||
| 2 | 51 | 81 | |||||
| 50 | 60.3 | 2.9 | 4.5 | 5.6 | 3 | 76 | 106 |
| 5 | 135 | 165 | |||||
| 2 | 63 | 102 | |||||
| 65 | 76.1 | 2.9 | 5.0 | 7.1 | 3 | 95 | 133 |
| 5 | 175 | 213 | |||||
| 2 | 76 | 121 | |||||
| 80 | 88.9 | 3.2 | 5.6 | 8.0 | 3 | 114 | 159 |
| 5 | 205 | 250 | |||||
| 2 | 102 | 159 | |||||
| 100 | 114.3 | 3.6 | 6.3 | 8.8 | 3 | 152 | 210 |
| 5 | 270 | 327 | |||||
| 2 | 127 | 197 | |||||
| 125 | 139.7 | 4.0 | 6.3 | 10.0 | 3 | 190 | 260 |
| 5 | 330 | 400 | |||||
| 2 | 152 | 237 | |||||
| 150 | 168.3 | 4.5 | 7.1 | 11.0 | 3 | 229 | 313 |
| 5 | 390 | 474 | |||||
| 2 | 203 | 313 | |||||
| 200 | 219.1 | 6.3 | 8.0 | 12.5 | 3 | 305 | 414 |
| 5 | 510 | 620 | |||||
| 2 | 254 | 391 | |||||
| 250 | 273.0 | 6.3 | 8.8 | - | 3 | 381 | 518 |
| 5 | 650 | 787 | |||||
| 2 | 305 | 467 | |||||
| 300 | 323.9 | 7.1 | 10.0 | - | 3 | 457 | 619 |
| 5 | 775 | 937 | |||||
MSS Sp-75 Elbow Dimensions
| Normal Pipe Sizes | I.D. at End | Out of Roundness | ||
| At Ends of Pipe Fittings | Throughout body of Elbow |
|||
| Elbow | Other | |||
| 16-24 | ±0.09 | 0.19 | 0.12 | 2.5% |
| 26-36 | ±0.09 | *A | 0.12 | 2.5% |
| 38-48 | ±0.12 | *A | 0.12 | 2.5% |
| 50-60 | ±0.25 | *A | 0.12 | 2.5% |
BS 4825 Elbow Dimensions
| Normal Pipe Sizes | Outside Daimeter In Millimeter | THK Millimeter |
| 1/2” | 12.7 | 1.20 |
| 3/4" | 19.05 | 1.20 |
| 1" | 25.40 | 1.60 |
| 1 1/2" | 38.10 | 1.60 |
| 2" | 50.80 | 1.60 |
| 2 1/2" | 63.50 | 1.60 |
| 3" | 76.20 | 1.60 |
| 4" | 101.6 | 2.00 |
ASME B16.9 Short Radius Elbow Types
9 Inch, Buttweld, Sch 10, Stainless Steel Short Radius 90 Degree Elbows According to ANSI B16.9
Sch 160, 4 Inch, ASME B16.9 Short Radius Elbows
12 Inch, Sch 40, ANSI B16.9, Short Radius Elbows 1.5d
14 Inch, SCH40, A234 Wh4B, Short Radius Weld Elbows
8 Inch, 90D, BW, SCH40, Carbon Steel Short Radius Elbows
ANSI B16.9, 5 Inch, SCH 120, Seamless Short Radius Grooved Elbows
4 Inch, SCH 40, A234 Wh4B, Seamless Short Radius 90 Degree Elbows
6 Inch, BW, Sch 10, Short Radius 90 Degree Elbows
Size 2 Inch, Beveled Ends, Elbows 90 Degree Short Radius
WT SCH 40, Size 7 Inch, Short Radius Sanitary Elbows
Butt Welded, 8 Inch, Aluminum Short Radius Elbows
Grooved End, 4 Inch, Stainless Steel Short Radius Elbows
Size 6 Inch, Schedule 40, Short Radius Elbows
OD 457mm X WT 55mm, Steel Short Radius Elbows
Size 28 Inch, WT 10.31MM, Ductile Iron Short Radius Elbows
