Reducing Tee
Refer ASME B16.9 Reducing Tee Manufacturer In India Dimensions And Weight, ANSI B16.9 Reducing Tee Pipe Fitting Wall Thickness.

What Is A Reducing Tee Used For?
Stainless Steel Reducing Tee is a type of pipe fitting that reduces the volume of fluid flow through a pipe system by connecting three pipes in a connection. The Reducing Tee Dimensions depend on the supplying pipe, the receiving pipe and the pressure requirements of the system. There are different and varying Unequal Tee Dimensions that cope up with different needs. The SS Reducing Tee Pipe Fitting is used in many applications that use pipe fittings. The different materials such as the Carbon Steel Reducing Tee and the Ansi B16.9 Pipe Reducing Tee Fittings are used in respective systems

316 Stainless Steel Reducing Tee

Carbon Steel Reducing Tee

ASME B16.9 Reducing Tee
Table of contents
How To Specify A Reducing Tee?
The Asme B16.9 Unequal Tee governs medium sized pipes up to 48 inches in diameter. The strength of Buttweld Unequal Tee is higher than that of normal ones. The Reducing Tee Joint is much effective than a cross joint in that it provides a plane of flow without much pressure confrontations. In cases of iron piping, the Galvanised Reducing Tee could be used to reduce corrosion. The ASME B16.9 Stainless Steel Reducing Tee has grooves to improve the fitting connection. The Extruded Reducing Tee is used in places where good impact strength is expected. A flanged fitting such as Reducing Tee Flanged is also used as per application need.
Check ASME B16.9 Reducing Tee Definition
The Reducing Tee Bsp indicates the British standards of Reducing Tee Pipe Fitting. The specification Reducing Tee A234 means wrought carbon steel fittings. The Reducing Tee Standard requirement varies according to the piping system and the contents of the piping. Regardless, these are used commonly in low cost systems and high cost systems alike. They are used in applications where piping is involved along with the pipes and other pipe fittins.
Check Carbon Steel Reducing Tee Price, EN 10253-2 Galvanized Reducing Tees Sizes Chart.
Carbon Steel Reducing Tee Price
Type Of Tee | Size And Material (All Material ASTM A234 WPB) | Price In India |
Reducing Tees | 2” X ½” X SCH 80 | 300.00 |
Reducing Tees | 3” X 2” X SCH 80 | 520.00 |
Reducing Tees | 4” X 2” X SCH 40 | 608.00 |
Reducing Tees | 4” X 3” X SCH 80 | 900.00 |
Please note this is an approx Price of carbon steel reducing tee in India. For final asme b16.9 reducing tee Price List Please Call on 91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.

Stainless Steel Reducing Tee Dimensions

Nominal Pipe Sizes (NPS) | Outside diameter (O.D.) at bevel |
Center-to-End | |||
---|---|---|---|---|---|
Run | Outlet | Run | Outlet | Run (C) | Outlet (M) |
1/2" | 1/4" 3/8" |
21.3 | 13.7 17.3 |
25 | 25 |
3/4" | 3/8" 1/2" |
26.7 | 17.3 21.3 |
29 | 29 |
1" | 1/2" 3/4" |
33.4 | 21.3 26.7 |
38 | 38 |
1 1/4" | 1/2" 3/4" 1" |
42.2 | 21.3 26.7 33.4 |
48 | 48 |
1 1/2" | 1/2" 3/4" 1" 1 1/4" |
48.3 | 21.3 26.7 33.4 42.2 |
57 | 57 |
2" | 3/4" 1" 1 1/4" 1 1/2" |
60.3 | 26.7 33.4 42.2 48.3 |
64 | 44 51 57 60 |
2 1/2" | 1" 1 1/4" 1 1/2" 2" |
73.0 | 33.4 42.2 48.3 60.3 |
76 | 57 64 67 70 |
3" | 1 1/4" 1 1/2" 2" 2 1/2" |
88.9 | 42.2 48.3 60.3 73.0 |
86 | 70 73 76 83 |
3 1/2" | 1 1/2" 2" 2 1/2" 3" |
101.6 | 48.3 60.3 73.0 88.9 |
95 | 79 83 89 92 |
4" | 1 1/2" 2" 2 1/2" 3" 3 1/2" |
114.3 | 48.3 60.3 73.0 88.9 101.6 |
105 | 86 89 95 98 102 |
5" | 2" 2 1/2" 3" 3 1/2" 4" |
141.3 | 60.3 73.0 88.9 101.6 114.3 |
124 | 105 108 111 114 117 |
6" | 2 1/2" 3" 3 1/2" 4" 5 |
168.3 | 73.0 88.9 101.6 114.3 141.3 |
143 | 121 124 127 130 137 |
8" | 3 1/2" 4" 5" 6" |
219.1 | 101.6 114.3 141.3 168.3 |
178 | 152 156 162 168 |
10" | 4" 5" 6" 8" |
273.0 | 114.3 141.3 168.3 219.1 |
216 | 184 191 194 203 |
12" | 5" 6" 8" 10" |
323.8 | 141.3 168.3 219.1 273.0 |
254 | 216 219 229 241 |
14" | 6" 8" 10" 12" |
355.6 | 168.3 219.1 273.0 323.8 |
279 | 238 248 257 270 |
16" | 6" 8" 10" 12" 14" |
406.4 | 168.3 219.1 273.0 323.8 355.6 |
305 | 264 273 283 295 305 |
18" | 8" 10" 12" 14" 16" |
457.0 | 219.1 273.0 323.8 355.6 406.4 |
343 | 298 308 321 330 330 |
20" | 8" 10" 12" 14" 16" 18" |
508.0 | 219.1 273.0 323.8 355.6 406.4 457.0 |
381 | 324 333 346 356 356 368 |
22" | 10" 12" 14" 16" 18" 20" |
559.0 | 273.0 323.8 355.6 406.4 457.0 508.0 |
419 | 359 371 381 381 394 406 |
24" | 10" 12" 14" 16" 18" 20" 22" |
610.0 | 273.0 323.8 355.6 406.4 457.0 508.0 559.0 |
432 | 384 397 406 406 419 432 432 |
Reducing Tee ASME B16.9 Weight
Normal Pipe Sizes | LBS | Weight In Kilogram |
1/2 | 0.35 | 0.16 |
3/4 | 0.45 | 0.2 |
1 | 0.75 | 0.34 |
1.1/4 | 1.3 | 0.59 |
1.1/2 | 2 | 0.91 |
2 | 3.5 | 1.59 |
2.1/2 | 6 | 2.72 |
3 | 7 | 3.18 |
3.1/2 | 9 | 4.08 |
4 | 12 | 5.44 |
5 | 21 | 9.53 |
6 | 34 | 15.42 |
8 | 55 | 24.95 |
10 | 85 | 38.56 |
12 | 120 | 54.43 |
14 | 165 | 74.84 |
16 | 195 | 88.45 |
18 | 249 | 112.94 |
20 | 342 | 155.13 |
22 | 414 | 187.79 |
24 | 528 | 239.5 |
26 | 770 | 349.27 |
30 | 1060 | 480.81 |
36 | 1490 | 675.85 |
NPS | LBS | KG |
Rajtilak Provide High Pressure Reducing Tee ASME B16.9 Certified And Tested Material In Mumbai, India.
There are different classes such as the Reducing Tee En 10253 and the Reducing Tee En 10253-2 which are British standards. The material make differs such as the Reducing Tee Ductile Iron and the Reducing Tee Carbon Steel according to need as well.
Reducing Tee Pipe Fitting Specifications
Specification: | ASME B16.9 Reducing Tee |
Standard | JIS, NPT, EN, ISO, DIN |
Size: | Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48” |
Materials: | Inconel, Monel, Hastalloy, Alloy Steel, Brass, Bronze, Copper, Iron (Ductile/Cast), Carbon Steel, Titanium, Chrome-molybdenum, Nickel Alloys, Tantalum, Stainless Steel, Cupro-Nickel 90/10 & 70/30, Nickel. |
Type: | Butt Weld (BW), Seamless (SMLS) Welded |
Type | Tees, Reducers, Caps, Elbows, Stub Ends, Bends, Adapters, Wyes, Cross. |
Connection Type | End Bell / Threaded/ Clamp End / Weld/ Flange/ |
Pressure-Temperature Class | 1500LB, 2500LB, 150LB, 300LB, 600LB. |
Schedule: | Schedule 5 TO Schedule XXS. |
Thickness: | Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc. |
Type Of Dimension: | BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313 |
Buttweld Reducing Tee Size Chart
Normal Pipe Sizes (NPS) | Outside Daimeter (O.D.) | Center To End | ||
---|---|---|---|---|
Inches | D | P | C | M |
1/2 x 3/8 | 21.3 | 17.1 | 25 | 25 |
1/2 x 1/4 | 21.3 | 13.7 | 25 | 25 |
3/4 x 1/2 | 26.7 | 21.3 | 29 | 29 |
3/4 x 3/8 | 26.7 | 17.1 | 29 | 29 |
1 x 3/4 | 33.4 | 26.7 | 38 | 38 |
1 x 1/2 | 33.4 | 21.3 | 38 | 38 |
1 1/4 x 1 | 42.2 | 33.4 | 48 | 48 |
1 1/4 x 3/4 | 42.2 | 26.7 | 48 | 48 |
1 1/4 x 1/2 | 42.2 | 21.3 | 48 | 48 |
1 1/2 x 1 1/2 | 48.3 | 42.2 | 57 | 57 |
1 1/2 x 1 | 48.3 | 33.4 | 57 | 57 |
1 1/2 x 3/4 | 48.3 | 26.7 | 57 | 57 |
1 1/2 x 1/2 | 48.3 | 21.3 | 57 | 57 |
2 x 1 1/2 | 60.3 | 48.2 | 64 | 60 |
2 x 1 1/4 | 60.3 | 42.2 | 64 | 57 |
2 x 1 | 60.3 | 33.4 | 64 | 51 |
2 x 3/4 | 60.3 | 26.7 | 64 | 44 |
2 1/2 x 2 | 73 | 60.3 | 76 | 70 |
2 1/2 x 1 1/2 | 73 | 48.3 | 76 | 67 |
2 1/2 x 1 1/4 | 73 | 42.2 | 76 | 64 |
2 1/2 x 1 | 73 | 33.4 | 76 | 57 |
3 x 2 1/2 | 88.9 | 73 | 86 | 83 |
3 x 2 | 88.9 | 60.3 | 86 | 76 |
3 x 1 1/2 | 88.9 | 48.3 | 86 | 73 |
3 x 1 1/4 | 88.9 | 42.2 | 86 | 70 |
3 1/2 x 3 | 101.6 | 88.9 | 95 | 92 |
3 1/2 x 21/2 | 101.6 | 73 | 95 | 89 |
3 1/2 x 2 | 101.6 | 60.3 | 95 | 83 |
3 1/2 x 1 1/2 | 101.6 | 48.3 | 95 | 79 |
4 x 3 1/2 | 114.3 | 101.6 | 105 | 102 |
4 x 3 | 114.3 | 88.9 | 105 | 98 |
4 x 2 1/2 | 114.3 | 73 | 105 | 95 |
4 x 2 | 114.3 | 60.3 | 105 | 89 |
4 x 1 1/2 | 114.3 | 48.3 | 105 | 86 |
5 x 4 | 141.3 | 114.3 | 124 | 117 |
5 x 3 1/2 | 141.3 | 101.6 | 124 | 114 |
5 x 3 | 141.3 | 88.9 | 124 | 111 |
5 x 2 1/2 | 141.3 | 73 | 124 | 108 |
5 x 2 | 141.3 | 60.3 | 124 | 105 |
6 x 5 | 168.3 | 141.3 | 143 | 137 |
6 x 4 | 168.3 | 114.3 | 143 | 130 |
6 x 3 1/2 | 168.3 | 101.6 | 143 | 127 |
6 x 3 | 168.3 | 88.9 | 143 | 124 |
6 x 2 1/2 | 168.3 | 73 | 143 | 121 |
8 x 6 | 219.1 | 168.3 | 178 | 168 |
8 x 5 | 219.1 | 141.3 | 178 | 162 |
8 x 4 | 219.1 | 114.3 | 178 | 156 |
8 x 3 1/2 | 219.1 | 101.6 | 178 | 152 |
10 x 8 | 273.1 | 219.1 | 216 | 203 |
10 x 6 | 273.1 | 168.1 | 216 | 194 |
10 x 5 | 273.1 | 141.3 | 216 | 191 |
10 x 4 | 273.1 | 114.3 | 216 | 184 |
12 x 10 | 323.9 | 273.1 | 254 | 241 |
12 x 8 | 323.9 | 219.1 | 254 | 229 |
12 x 6 | 323.9 | 168.3 | 254 | 219 |
12 x 5 | 323.9 | 141.3 | 254 | 216 |
14 x 12 | 355.6 | 323.9 | 279 | 270 |
14 x 10 | 355.6 | 273.1 | 279 | 257 |
14 x 8 | 355.6 | 219.1 | 279 | 248 |
14 x 6 | 355.6 | 168.3 | 279 | 238 |
16 x 14 | 406.4 | 355.6 | 305 | 305 |
16 x 12 | 406.4 | 323.9 | 305 | 295 |
16 x 10 | 406.4 | 273.1 | 305 | 283 |
16 x 8 | 406.4 | 219.1 | 305 | 273 |
16 x 6 | 406.4 | 168.3 | 305 | 264 |
18 x 16 | 457 | 406.4 | 343 | 330 |
18 x 14 | 457 | 355.6 | 343 | 330 |
18 x 12 | 457 | 323.9 | 343 | 321 |
18 x 10 | 457 | 273.1 | 343 | 308 |
18 x 8 | 457 | 219.1 | 343 | 298 |
20 x 18 | 508 | 457 | 381 | 368 |
20 x 16 | 508 | 406.4 | 381 | 356 |
20 x 14 | 508 | 355.6 | 381 | 356 |
20 x 12 | 508 | 323.9 | 381 | 346 |
20 x 10 | 508 | 273.1 | 381 | 333 |
20 x 8 | 508 | 219.1 | 381 | 324 |
22 x 20 | 559 | 508 | 419 | 406 |
22 x 18 | 559 | 457 | 419 | 394 |
22 x 16 | 559 | 406.4 | 419 | 381 |
22 x 14 | 559 | 355.6 | 419 | 381 |
22 x 12 | 559 | 323.9 | 419 | 371 |
24 x 10 | 559 | 273.1 | 419 | 359 |
24 x 22 | 610 | 559 | 432 | 432 |
24 x 20 | 610 | 508 | 432 | 432 |
24 x 18 | 610 | 457 | 432 | 419 |
24 x 16 | 610 | 406.4 | 432 | 406 |
24 x 14 | 610 | 355.6 | 432 | 406 |
24 x 12 | 610 | 323.9 | 432 | 397 |
24 x 10 | 610 | 273.1 | 432 | 384 |
DIN 2615 Reducing Tee Dimensions

WDR | WDR | ||||||||||
3 | 4 | 5 | 3 | 4 | 5 | ||||||
DN1 | d1 | s1 | s1 | s1 | DN2 | d2 | s2 | s2 | s2 | a | b |
15 | 21.3 | 2.0 | 3.2 | 4.0 | 15 | 21.3 | 2.0 | 3.2 | 4.0 | 25 | 25 |
10 | 17.2 | 1.8 | 2.9 | - | 25 | 25 | |||||
20 | 26.9 | 2.3 | 3.2 | 4.0 | 20 | 26.9 | 2.3 | 3.2 | 4.0 | 29 | 29 |
15 | 21.3 | 2.0 | 3.2 | 4.0 | 29 | 29 | |||||
10 | 17.2 | 1.8 | 2.9 | - | 29 | 29 | |||||
25 | 33.7 | 2.6 | 3.2 | 4.0 | 25 | 33.7 | 2.6 | 3.2 | 4.0 | 38 | 38 |
20 | 26.9 | 2.3 | 3.2 | 4.0 | 38 | 38 | |||||
15 | 21.3 | 2.0 | 3.2 | 4.0 | 38 | 38 | |||||
32 | 42.4 | 2.6 | 3.6 | 4.0 | 32 | 42.4 | 2.6 | 3.6 | 4.0 | 48 | 48 |
25 | 33.7 | 2.6 | 3.2 | 4.0 | 48 | 48 | |||||
20 | 26.9 | 2.3 | 3.2 | 4.0 | 48 | 48 | |||||
15 | 21.3 | 2.0 | 3.2 | 4.0 | 48 | 48 | |||||
40 | 48.3 | 2.6 | 4.0 | 5.0 | 40 | 48.3 | 2.6 | 4.0 | 5.0 | 57 | 57 |
32 | 42.4 | 2.6 | 3.6 | 4.0 | 57 | 57 | |||||
25 | 33.7 | 2.6 | 3.2 | 4.0 | 57 | 57 | |||||
20 | 26.9 | 2.3 | 3.2 | 4.0 | 57 | 57 | |||||
50 | 60.3 | 2.9 | 4.5 | 5.6 | 50 | 60.3 | 2.9 | 4.5 | 5.6 | 64 | 64 |
40 | 48.3 | 2.6 | 4.0 | 5.0 | 64 | 60 | |||||
32 | 42.4 | 2.6 | 3.6 | 4.0 | 64 | 57 | |||||
25 | 33.7 | 2.6 | 3.2 | 4.0 | 64 | 51 | |||||
20 | 26.9 | 2.3 | 3.2 | 4.0 | 64 | 44 | |||||
65 | 76.1 | 2.9 | 5.0 | 7.1 | 65 | 76.1 | 2.9 | 5.0 | 7.1 | 76 | 76 |
50 | 60.3 | 2.9 | 4.5 | 5.6 | 76 | 70 | |||||
40 | 48.3 | 2.6 | 4.0 | 5.0 | 76 | 67 | |||||
32 | 42.4 | 2.6 | 3.6 | 4.0 | 76 | 64 | |||||
25 | 33.7 | 2.6 | 3.2 | 4.0 | 76 | 57 | |||||
80 | 88.9 | 3.2 | 5.6 | 8.0 | 80 | 88.9 | 3.2 | 5.6 | 8.0 | 86 | 86 |
65 | 76.1 | 2.9 | 5.0 | 7.1 | 86 | 83 | |||||
50 | 60.3 | 2.9 | 4.5 | 5.6 | 86 | 76 | |||||
40 | 48.3 | 2.6 | 4.0 | 5.0 | 86 | 73 | |||||
32 | 42.4 | 2.6 | 3.6 | 4.0 | 86 | 70 | |||||
100 | 114.3 | 3.6 | 6.3 | 8.8 | 100 | 114.3 | 3.6 | 6.3 | 8.8 | 105 | 105 |
80 | 88.9 | 3.2 | 5.6 | 8.0 | 105 | 98 | |||||
65 | 76.1 | 2.9 | 5.0 | 7.1 | 105 | 95 | |||||
50 | 60.3 | 2.9 | 4.5 | 5.6 | 105 | 89 | |||||
40 | 48.3 | 2.6 | 4.0 | 5.0 | 105 | 86 | |||||
125 | 139.7 | 4.0 | 6.3 | 10.0 | 125 | 139.7 | 4.0 | 6.3 | 10.0 | 124 | 124 |
100 | 114.3 | 3.6 | 6.3 | 8.8 | 124 | 117 | |||||
80 | 88.9 | 3.2 | 5.6 | 8.0 | 124 | 111 | |||||
65 | 76.1 | 2.9 | 5.0 | 7.1 | 124 | 108 | |||||
50 | 60.3 | 2.9 | 4.5 | 5.6 | 124 | 105 | |||||
150 | 168.3 | 4.5 | 7.1 | 11.0 | 150 | 168.3 | 4.5 | 7.1 | 11.0 | 143 | 143 |
125 | 139.7 | 4.0 | 6.3 | 10.0 | 143 | 137 | |||||
100 | 114.3 | 3.6 | 6.3 | 8.8 | 143 | 130 | |||||
80 | 88.9 | 3.2 | 5.6 | 8.0 | 143 | 124 | |||||
65 | 76.1 | 2.9 | 5.0 | 7.1 | 143 | 121 | |||||
200 | 219.1 | 6.3 | 8.0 | 12.5 | 200 | 219.1 | 6.3 | 8.0 | 12.5 | 178 | 178 |
150 | 168.3 | 4.5 | 7.1 | 11.0 | 178 | 168 | |||||
125 | 139.7 | 4.0 | 6.3 | 10.0 | 178 | 162 | |||||
100 | 114.3 | 3.6 | 6.3 | 8.8 | 178 | 156 | |||||
80 | 88.9 | 3.2 | 5.6 | 8.0 | 178 | 152 | |||||
250 | 273.0 | 6.3 | 8.8 | 14.2 | 250 | 273.0 | 6.3 | 8.8 | 14.2 | 216 | 216 |
200 | 219.1 | 6.3 | 8.0 | 12.5 | 216 | 203 | |||||
150 | 168.3 | 4.5 | 7.1 | 11.0 | 216 | 194 | |||||
125 | 139.7 | 4.0 | 6.3 | 10.0 | 216 | 191 | |||||
100 | 114.3 | 3.6 | 6.3 | 8.8 | 216 | 184 | |||||
300 | 323.9 | 7.1 | 10.0 | 16.0 | 300 | 323.9 | 7.1 | 10.0 | 16.0 | 254 | 254 |
250 | 273.0 | 6.3 | 8.8 | 14.2 | 254 | 241 | |||||
200 | 219.1 | 6.3 | 8.0 | 12.5 | 254 | 229 | |||||
150 | 168.3 | 4.5 | 7.1 | 11.0 | 254 | 219 | |||||
125 | 139.7 | 4.0 | 6.3 | 10.0 | 254 | 216 |
DIN 11852 Tee Dimensions

MSS Sp 75 Tee Dimensions
Normal Pipe Sizes | Reducers Overall Length | Caps Overall Length | ||
Reducing Tee | 3R | |||
16-24 | ±0.09 | ±0.12 | ±0.09 | ±0.25 |
26-36 | ±0.12 | ±0.25 | ±0.19 | ±0.38 |
38-48 | ±0.19 | ±0.38 | ±0.38 | ±0.38 |
50-60 | ±0.25 | ±0.38 | ±0.38 | ±0.38 |
DIN 1624 Tee Nut Dimensions
Tee Nut Sizes | Tee Nut Finish | Tee Nut Type |
M4×6 | Z/P | Stamping |
M5×8 | Z/P | Stamping |
M6×8 | Z/P | Stamping |
M6×10 | Z/P | Stamping |
M6×14 | Z/P | Stamping |
M8×12 | Z/P | Stamping |
M8×14 | Z/P | Stamping |
M8×16 | Z/P | Stamping |
M10×12 | Z/P | Stamping |
DIN 2605 Tee Dimensions

WDR | |||||||
3 | 4 | 5 | |||||
DN1 | d1 | s | s | s | BA | r | b |
2 | 17.5 | 28 | |||||
15 | 21.3 | 2.0 | 3.2 | 4.0 | 3 | 28.0 | 38 |
5 | 42.5 | 53 | |||||
2 | 25.0 | 39 | |||||
20 | 26.9 | 2.3 | 3.2 | 4.0 | 3 | 29.0 | 43 |
5 | 57.5 | 71 | |||||
2 | 25.0 | 42 | |||||
25 | 33.7 | 2.6 | 3.2 | 4.0 | 3 | 38.0 | 56 |
5 | 72.5 | 90 | |||||
2 | 32.0 | 53 | |||||
32 | 42.4 | 2.6 | 3.6 | 4.0 | 3 | 48.0 | 69 |
5 | 92.5 | 114 | |||||
2 | 38.0 | 62 | |||||
40 | 48.3 | 2.6 | 4.0 | 5.0 | 3 | 57.0 | 82 |
5 | 107.5 | 132 | |||||
2 | 51 | 81 | |||||
50 | 60.3 | 2.9 | 4.5 | 5.6 | 3 | 76 | 106 |
5 | 135 | 165 | |||||
2 | 63 | 102 | |||||
65 | 76.1 | 2.9 | 5.0 | 7.1 | 3 | 95 | 133 |
5 | 175 | 213 | |||||
2 | 76 | 121 | |||||
80 | 88.9 | 3.2 | 5.6 | 8.0 | 3 | 114 | 159 |
5 | 205 | 250 | |||||
2 | 102 | 159 |
EN 10253-2 Reducing Tee Dimensions With Type A And Type B

EN 10253-2 Tee Side D | EN 10253-2 Tee Side D1 | ||||||
DN | D | DN1 | D1 | F | G | ||
20 | 26,9 | 15 | 21,3 | 29 | 29 | ||
25 | 33,7 | 15 | 21,3 | 38 | 38 | ||
20 | 26,9 | ||||||
32 | 42,4 | 15 | 21,3 | 48 | 48 | ||
20 | 26,9 | ||||||
25 | 33,7 | ||||||
40 | 48,3 | 15 | 21,3 | 57 | 57 | ||
20 | 26,9 | ||||||
25 | 33,7 | ||||||
32 | 42,4 | ||||||
50 | 60,3 | 20 | 26,9 | 64 | 44 | ||
25 | 33,7 | 51 | |||||
32 | 42,4 | 57 | |||||
40 | 48,3 | 60 | |||||
65 | 76,1 | 25 | 33,7 | 76 | 57 | ||
32 | 42,4 | 64 | |||||
40 | 48,3 | 67 | |||||
50 | 60,3 | 70 | |||||
80 | 88,9 | 32 | 42,4 | 86 | 70 | ||
40 | 48,4 | 73 | |||||
50 | 60,3 | 76 | |||||
65 | 76,1 | 83 | |||||
100 | 114,3 | 40 | 48,3 | 105 | 86 | ||
50 | 60,3 | 89 | |||||
65 | 76,1 | 95 | |||||
80 | 88,9 | 98 | |||||
125 | 139,7 | 50 | 60,3 76,1 88,9 114,3 | 124 | 105 | ||
65 | 108 | ||||||
80 | 111 | ||||||
100 | 117 | ||||||
150 | 168,3 | 65 | 76,1 | 143 | 121 | ||
80 | 88,9 | 124 | |||||
100 | 114,3 | 130 | |||||
125 | 139,7 | 137 | |||||
200 | 219,1 | 100 | 114,3 | 178 | 156 | ||
125 | 139,7 168,3 | 162 | |||||
150 | 168 | ||||||
250 | 273,1 | 100 | 114,3 | 216 | 184 | ||
125 | 139,7 | 191 | |||||
150 | 168,3 | 194 | |||||
200 | 219,1 | 203 | |||||
300 | 323,9 | 150 | 168,3 | 254 | 219 | ||
200 | 219,1 | 229 | |||||
250 | 273 | 241 | |||||
350 | 355,6 | 150 | 168,3 | 279 | 238 | ||
200 | 219,1 | 248 | |||||
250 | 273 | 257 | |||||
300 | 323,9 | 270 | |||||
400 | 406,4 | 150 | 168,3 | 305 | 264 | ||
200 | 219,1 | 273 | |||||
250 | 273 | 283 | |||||
300 | 323,9 | 295 | |||||
350 | 355,6 | 305 | |||||
450 | 457 | 200 | 219,1 | 343 | 298 | ||
250 | 273 | 308 | |||||
300 | 323,9 | 321 | |||||
350 | 355,6 | 330 | |||||
400 | 406,4 | 330 | |||||
500 | 508 | 250 | 273 | 381 | 333 | ||
300 | 323,9 | 346 | |||||
400 | 406,4 | 356 | |||||
450 | 457,0 | 368 | |||||
550 | 559 | 250 | 273 | 419 | 359 | ||
300 | 323,9 | 371 | |||||
400 | 406,4 | 381 | |||||
500 | 508,0 | 406 | |||||
600 | 610 | 250 | 273 | 432 | 384 | ||
300 | 323,9 | 397 | |||||
400 | 406,4 | 406 | |||||
500 | 508,0 | 432 | |||||
650 | 660 | 300 | 323,9 | 495 | 422 | ||
350 | 355,6 | 432 | |||||
400 | 406,4 | 432 | |||||
500 | 508 | 457 | |||||
700 | 711 | 300 | 323,9 | 521 | 448 | ||
400 | 406,4 | 457 | |||||
500 | 508,0 | 483 | |||||
600 | 610,0 | 508 | |||||
750 | 762 | 400 | 406,4 | 559 | 483 | ||
500 | 508,0 | 508 | |||||
600 | 610,0 | 533 | |||||
800 | 813 | 400 | 406,4 | 602 | 508 | ||
500 | 508,0 | 533 | |||||
600 | 610,0 | 559 | |||||
700 | 711,0 | 572 | |||||
850 | 864 | 400 | 406,4 | 635 | 533 | ||
500 | 508,0 | 559 | |||||
600 | 610,0 | 584 | |||||
700 | 711,0 | 597 | |||||
900 | 914 | 400 | 406,4 | 673 | 559 | ||
500 | 508,0 | 584 | |||||
600 | 610,0 | 610 | |||||
700 | 711,0 | 622 | |||||
800 | 813,0 | 648 | |||||
1 000 | 1 016 | 600 | 610,0 | 749 | 660 | ||
700 | 711,0 | 673 | |||||
800 | 813,0 | 711 | |||||
900 | 914,0 | 737 | |||||
1 050 | 1 067 | 600 | 610,0 | 762 | 660 | ||
700 | 711,0 | 698 | |||||
800 | 813,0 | 711 | |||||
900 | 914,0 | 711 | |||||
1 100 | 1 118 | 600 | 610,0 | 813 | 698 | ||
700 | 711,0 | 698 | |||||
800 | 813,0 | 711 | |||||
900 | 914 | 724 | |||||
1 200 | 1 219 | 700 | 711,0 | 889 | 762 | ||
800 | 813,0 | 787 | |||||
900 | 914,0 | 787 | |||||
1 000 | 1 016,0 | 813 |
Buy ASME B16.9 Reducing Tee For Sale In Mumbai, India

ASTM A403 WP304L, 12 Inch, Stainless Steel Reducing Tee

Schedule 10S, ANSI B16.9, Reducing Tee Pipe Fittings

BW Ends, Model 3 X 2 Inch, ASME B16.9 Reducing Tee

2 x 2 x 1 in. Schedule 10 Brass Reducing Tee

SCH 120 Thick., 8 X 8 inch Size, Black Pipe Reducing Tees

Size DN 250, ISO 2531, PN 16, Galvanized Reducing Tees

DN300 x DN100, ANSI B16.9, Carbon Steel Reducing Tees

W.T. 12.7 x 8.56 MM, Welded, Compression Reducing Tees

2 Inch, SCH 40, Standard B16.9, Welded 40mm To 32mm Reducer Tee

8 Inch, SCH 40, B16.9, Stainless Steel Reducing Tee

4 Inch, SCH STD, BW End, Stainless Steel Reducing Tee

ASTM A234 WPB, 6 Inch, SCH 40, Eccentric Reducing Tee

4 Inch, SCH 10S, BE End, Reducing Barred Tees

A234 WPB, 3 Inch, SCH 80S, Steel Seamless Reducing Tees

Black Coating, B16.9, 2 Inch, SCH 40, B16.9 Reducing Tees
