Tee Fittings

ANSI B16.9 Equal Tee Manufacturer In India And MSS SP-75 SS Unequal Tees Dimensions / Weight Chart.

What Is An Equal Tee?

What Is An Equal Tee?

ASME B16.9 Equal Tee Pipe Fitting is a type of pipe fitting that has equally sized openings and belongs to a standard that governed up to NPS48 nominal size pipes and fittings. The Equal Tee Dimensions vary depending on the standard, the type, the material and other requirements of the application. The Equal Tee Weight Chart provided by [] would allow clients to analyze which product would suit them. The Stainless Steel Equal Tee Fitting is a Stainless Steel Tee that is used to connect three equally sized pipes. The same diameter carbon steel pipes could be fitted with the Carbon Steel Equal Tee Pipe Fitting. The standards differ such as the Asme B16 9 Tee.


ASME B16.9 Tee

ASME B16.9 Tee

Stainless Steel Equal Tee

Stainless Steel Equal Tee

Tee Fittings

Tee Fittings


 

Table of contents


What Is A Straight Tee?

The differing standards also make the different Straight Tee Dimensions Asme B16 9 and sizes. There are ASME B16.9 Tee Dimensions which would have one of the openings in a differing size. These Straight tees are also called the Straight Tee. The major difference in ASME B16.9 Straight Tee Dimensions and the unequal ones is the diameter of one opening being different. Equal Tee And Straight Tee are used according to the need of the piping sizes.


Difference Between Equal & Unequal Tee

  • The same piping can use Equal And Unequal Tee where alternating pipe sizes are involved like in the domestic water supply lines. Smaller pipes up to 48 inches can have Equal Tee Asme B16.9 in their fittings. A different type called Barred Equal Tee is used to block the deposits, effluences or floats from traveling from one side of the piping to the other.

  • The Unequal Tee is much effective than a cross joint in that it provides a plane of flow without much pressure confrontations. In cases of iron piping, the Galvanised Reducing Tee could be used to reduce corrosion.


Use Of Carbon Steel Equal Tee For Long Service Life

The different productions like the Bw Equal Tee or the Cast Iron Equal Tee are used. Considering the cost, the Carbon Steel Equal Tee is much reliable than the Copper Equal Tee. On the other hand, the Equal Flow Tee should have a corrosion resistance and this would mandate the choice of materials the other way around. The Grooved Equal Tee has grooves to make the connection better. There are some Equal Fabricated Tee types available in the market as well.


Difference Between Equal And Unequal Tee As Per ASME B16.9, Check Stainless Steel Equal Tee Dimensions, Equal Tee Pipe Fitting Length Chart And Price List.

Equal Tee Price List

Type Of Tee Size And Material Price In India
Equal Tees ASTM A234 WPB, STD 1/2 134.96
Equal Tees ASTM A234 WPB, STD 3/4" 143.96
Equal Tees ASTM A234 WPB, STD 1" 215.94
Equal Tees ASTM A234 WPB, STD 1 1/4" 296.92
Equal Tees ASTM A234 WPB, STD 1 1/2" 422.89
Equal Tees ASTM A234 WPB, STD 2" 683.81
Equal Tees A234 WPB 2 1/2" STD 989.73
Equal Tees A234 WPB 3" STD 1529.58
Equal Tees A234 WPB 4" STD 2519.32
Equal Tees ASTM A234 WPB, STD 5" 4228.85
Buy Now

Please note this is an approx Price of asme b16.9 equal tee in India. For final ansi B16.9 carbon steel equal tee Price List Please Call on 91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.


ASME B16.9 Equal Tee Pipe Fitting

We Provide Carbon Steel Equal Tee Expert Cutting Service And 3rd Party Testing In Mumbai, India.

ASME B16.9 Tee Dimensions

NPS (Normal Pipe Sizes)Outside Daimeter (O.D.)Center To EndLength
InchesOutside DaimeterCM
1/221.32525
3/426.72929
133.43838
1 1/442.24848
1 1/248.35757
260.36464
2 1/2737676
388.98686
3 1/2101.69595
4114.3105105
5141.3124124
6168.3143143
8219.1178178
10273.1216216
12323.9254254
14355.6279279
16406.4305305
18457.2343343
20508381381
22559419419
24610432432
26660495495
28711521521
30762559559
32813597597
34864635635
36914673673
38965711711
401016749749
421067762711
441118813762
461168851800
481219889838
All Dimensions are in millimeter

ASME B16.9 Equal Tee Weight Calculation Formula

Normal Pipe Sizes LBS Weight In Kilogram
1/2 0.35 0.16
3/4 0.45 0.2
1 0.75 0.34
1.1/4 1.3 0.59
1.1/2 2 0.91
2 3.5 1.59
2.1/2 6 2.72
3 7 3.18
3.1/2 9 4.08
4 12 5.44
5 21 9.53
6 34 15.42
8 55 24.95
10 85 38.56
12 120 54.43
14 165 74.84
16 195 88.45
18 249 112.94
20 342 155.13
22 414 187.79
24 528 239.5
26 770 349.27
30 1060 480.81
36 1490 675.85
NPS LBS KG

Stainless Steel Equal Tee Dimensions

Stainless Steel Equal Tee Dimensions
Nominal Pipe Size (NPS) Outside diameter (O.D.)
at bevel		 Center-to-End
Run (C) Outlet(M)
1/2" 21.3 25 25
3/4" 26.7 29 29
1" 33.4 38 38
1 1/4" 42.2 48 48
1 1/2" 48.3 57 57
2" 60.3 64 64
2 1/2" 73.0 76 76
3" 88.9 86 86
3 1/2" 101.6 95 95
4" 114.3 105 105
5" 141.3 124 124
6" 168.3 143 143
8" 219.1 178 178
10" 273.0 216 216
12" 323.8 254 254
14" 355.6 279 279
16" 406.4 305 305
18" 457.0 343 343
20" 508.0 381 381
22" 559.0 419 419
24" 610.0 432 432

Equal Tee Pipe Fitting Specification

Specification: ASME B16.9 Equal Tee
Standard DIN, JIS, EN, ISO, NPT
Type Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross,
Connection Type End Bell / Weld/ Flange/ Threaded/ Clamp End
Pressure-Temperature Class 600LB, 1500LB, 150LB, 300LB, 2500LB.
Size: Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48”
Materials: Titanium, Chrome-molybdenum, Nickel Alloys, Tantalum, Stainless Steel, Cupro-Nickel 90/10 & 70/30, Nickel, Inconel, Monel, Brass, Bronze, Copper, Iron (Ductile/Cast), Carbon Steel, Hastalloy, Alloy Steel.
Type: Butt Weld (BW), Seamless (SMLS) Welded
Thickness: 10S, S80, S100, S120, STD, 40S, Sch 5S, 20S, S10, S20, S30, S40, S60, XS, 80S, S140, S160, XXS and etc.
Schedule: Schedule 5 TO Schedule XXS.
Type Of Dimension: BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313

Pipe Equal Tee Formula

  • Equal Tee Formula

  • 90 Deg
  • 4" Inches X 4" Inches
  • Pipe Outside Daimeter X 2/5

  • For Demo

  • 4" Inch Pipe Outside Daimeter = 114.30
  • 114.30 X 2 = 228.60 / 5 = 45.72 millimeter cut back

Most Reliable Supplier Of DIN 2615 Copper / Brass / Galvanised / Mild Steel Equal Tee And Unequal Tees In India.

ANSI B16.9 Equal Tee Length Chart

NPS (Normal Pipe Sizes) Outside Daimeter (O.D.) Center to End Length
Inches O.D. C M
1/2 21.3 25 25
3/4 26.7 29 29
1 33.4 38 38
1 1/4 42.2 48 48
1 1/2 48.3 57 57
2 60.3 64 64
2 1/2 73 76 76
3 88.9 86 86
3 1/2 101.6 95 95
4 114.3 105 105
5 141.3 124 124
6 168.3 143 143
8 219.1 178 178
10 273.1 216 216
12 323.9 254 254
14 355.6 279 279
16 406.4 305 305
18 457.2 343 343
20 508 381 381
22 559 419 419
24 610 432 432
26 660 495 495
28 711 521 521
30 762 559 559
32 813 597 597
34 864 635 635
36 914 673 673
38 965 711 711
40 1016 749 749
42 1067 762 711
44 1118 813 762
46 1168 851 800
48 1219 889 838

Straight Tee Dimensions

Straight Tee Dimensions
NPS (Normal Pipe Sizes) Outside Daimeter (O.D.)
D		 Center to End
C		 Center to End
M
1/2 21.3 25 25
3/4 26.7 29 29
1 33.4 38 38
1¼ 42.2 48 48
1½ 48.3 57 57
2 60.3 64 64
2½ 73 76 76
3 88.9 86 86
3½ 101.6 95 95


Check How To Make An ASME B16.9 Equal Tee Pattern And Buttweld Equal And Unequal Tee Formula Length / Center Chart.

Barred Tee Dimensions

>Barred Tee Dimensions

(NPS) Nominal Pipe Sizes Outside Daimeter (O.D.)
at bevel		 Center-to-End
Run Outlet Run Outlet Run (C) Outlet (M)
1/2" 1/4"
3/8"		 21.3 13.7
17.3		 25 25
3/4" 3/8"
1/2"		 26.7 17.3
21.3		 29 29
1" 1/2"
3/4"		 33.4 21.3
26.7		 38 38
1 1/4" 1/2"
3/4"
1"		 42.2 21.3
26.7
33.4		 48 48
1 1/2" 1/2"
3/4"
1"
1 1/4"		 48.3 21.3
26.7
33.4
42.2		 57 57
2" 3/4"
1"
1 1/4"
1 1/2"		 60.3 26.7
33.4
42.2
48.3		 64 44
51
57
60
2 1/2" 1"
1 1/4"
1 1/2"
2"		 73.0 33.4
42.2
48.3
60.3		 76 57
64
67
70
3" 1 1/4"
1 1/2"
2"
2 1/2"		 88.9 42.2
48.3
60.3
73.0		 86 70
73
76
83
3 1/2" 1 1/2"
2"
2 1/2"
3"		 101.6 48.3
60.3
73.0
88.9		 95 79
83
89
92
4" 1 1/2"
2"
2 1/2"
3"
3 1/2"		 114.3 48.3
60.3
73.0
88.9
101.6		 105 86
89
95
98
102
5" 2"
2 1/2"
3"
3 1/2"
4"		 141.3 60.3
73.0
88.9
101.6
114.3		 124 105
108
111
114
117
6" 2 1/2"
3"
3 1/2"
4"
5 		 168.3 73.0
88.9
101.6
114.3
141.3		 143 121
124
127
130
137
8" 3 1/2"
4"
5"
6"		 219.1 101.6
114.3
141.3
168.3		 178 152
156
162
168
10" 4"
5"
6"
8"		 273.0 114.3
141.3
168.3
219.1		 216 184
191
194
203
12" 5"
6"
8"
10"		 323.8 141.3
168.3
219.1
273.0		 254 216
219
229
241
14" 6"
8"
10"
12"		 355.6 168.3
219.1
273.0
323.8		 279 238
248
257
270
16" 6"
8"
10"
12"
14"		 406.4 168.3
219.1
273.0
323.8
355.6		 305 264
273
283
295
305
18" 8"
10"
12"
14"
16"		 457.0 219.1
273.0
323.8
355.6
406.4		 343 298
308
321
330
330
20" 8"
10"
12"
14"
16"
18"		 508.0 219.1
273.0
323.8
355.6
406.4
457.0		 381 324
333
346
356
356
368
22" 10"
12"
14"
16"
18"
20"		 559.0 273.0
323.8
355.6
406.4
457.0
508.0		 419 359
371
381
381
394
406
24" 10"
12"
14"
16"
18"
20"
22"		 610.0 273.0
323.8
355.6
406.4
457.0
508.0
559.0		 432 384
397
406
406
419
432
432


Split Tee Dimensions

Split Tee Dimensions

Popular Types Of Buttweld Equal Tee ASME B16.9

ASME B16.9, Sch XXS, Size 10 Inch, Stainless Steel Tee

ASME B16.9, Sch XXS, Size 10 Inch, Stainless Steel Tee

ANSI B16.9, 2 Inch, SCH XXS, Equal Tee Fittings

ANSI B16.9, 2 Inch, SCH XXS, Equal Tee Fittings

DN300 * DN200, SCH 120, BW Ends, Equal Tee Pipe Fittings

DN300 * DN200, SCH 120, BW Ends, Equal Tee Pipe Fittings

DN1400 × 1400, Thick. 9.53 mm, Stainless Steel Tee

DN1400 × 1400, Thick. 9.53 mm, Stainless Steel Tee


1-1/2 x 1-1/2 x 3/4 in. Weld Schedule 60 22mm Equal Tee

1-1/2 x 1-1/2 x 3/4 in. Weld Schedule 60 22mm Equal Tee

ASTM A536, 80MM, Stainless Steel Seamless Tees

ASTM A536, 80MM, Stainless Steel Seamless Tees

Standard ISO 2531, Size DN500 x DN300, Equal Tee

Standard ISO 2531, Size DN500 x DN300, Equal Tee

12 Inch, DN300, SCH40, BW Ends, Compression Equal Tee

12 Inch, DN300, SCH40, BW Ends, Compression Equal Tee


DN450 x DN200, Butt Welded, Equal Tee Asme B16.9

DN450 x DN200, Butt Welded, Equal Tee Asme B16.9

ANSI B16.9, WT 19.05 x 10.31mm, ASTM A106 Galvanised Equal Tees For Long Service Life

ANSI B16.9, WT 19.05 x 10.31mm, ASTM A106 Galvanised Equal Tees For Long Service Life

WPHY60, 18 Inch, SCH STD, Grooved Equal Tee

WPHY60, 18 Inch, SCH STD, Grooved Equal Tee

ANSI B16.9, Schedule XXS, Size 8 Inch, Equal Flange Tee

ANSI B16.9, Schedule XXS, Size 8 Inch, Equal Flange Tee


2 Inch, Schedule 40, Butt Welded Connection, Gi Equal Tees

2 Inch, Schedule 40, Butt Welded Connection, Gi Equal Tee

Diameter 10 Inch, ASTM A536, Stainless Steel Straight Tees

Diameter 10 Inch, ASTM A536, Stainless Steel Straight Tee

Grade 65, 45, 12, 4 X 3 Inch,Stainless Steel Seamless Tee

Grade 65, 45, 12, 4 X 3 Inch,Stainless Steel Seamless Tees

SCH 120, 4 Inch, BW, ASME B16.9, Stainless Steel Equal Barred Tee

SCH 120, 4 Inch, BW, ASME B16.9, Stainless Steel Equal Barred Tees



Have A Query? Drop Us An Email

Call Now : +91 9869506920


About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

13th Floor, Office No 1309, Prasad Chambers, Tata Rd No 2,
Charni Road East, Opera House, Girgaon, Mumbai,
Maharashtra 400004 (INDIA)


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy