ASME B16.9 Elbow
Check 45 Degree Elbow Centre Formula And Schedule 40 Carbon Steel 45 Deg Elbows Price List In India.

What Is 45 Degree Elbow?
45 Deg Elbow is a type of elbow used to connect two pipes to change the direction of fluid flow in the pipeline. The denotation of Deg is the abbreviation for degrees therefore the 45 Deg means an ASME B16.9 elbow 45 degree fitting. 45 Deg Elbow Dimensions vary according to the standards. There are diameters ranging from ½ inches all the way up to 60 inches in two standards. The 45 Deg Elbow Weight depends on the length, material make, diameter and the radius of the elbow.

ASME B16.9 45 Deg Elbow

Carbon Steel 45 Degree Elbow

45 Degree Copper Elbow
Table of contents
How To Find The Center Of A 45 Degree Elbow?
45 deg elbows center formula to end dimension for 2 inch nps diameter elbow at 30 deg angle, cut from 45 deg long radius elbow
From ASME B16.9, center to elbow dimension for 2 inch asme b16.9 45 deg elbow is 35 millimeter.
- Radius of elbow = 35/Tan(22.5)
- Radius of elbow = 35/0.4142 = 84.5 millimeter
- Length = 0.26795 X 84.5
- Length = 22.64 i.e. 23 millimeter Approx.
What Use Of Stainless Steel 45 Degree Elbow?
45 Degree Compression Elbow is another type of elbow used to connect two pieces of pipes with change of direction at a 45 degree angle. ASME B16.9 Elbow 45 Deg is a range that complies from NPS1/2 to NPS24. SCH 80 45 Degree Elbow belongs to the schedule 80 category where the Elbow 45 Sch 10 belongs to the schedule 10 and the Elbow 45 Sch 40 belongs to schedule 40.
The 45 Deg Elbow Short Radius has a short radius so that the elbow is smaller compared to a 45 Deg Elbow Lr which has a long radius. The 45 Deg Elbow Long Radius is difficult to fit in narrow lines compared to the 45 Deg Short Radius Elbow. Carbon Steel 45 Degree Elbow Fitting can be worked under cold conditions but is usually supplier in a normalized and tempered condition. 45 Degree Pipe Elbow takes a less aggressive turn than a 90 degree elbow and thus the 45 Deg Street Elbow would reduce the stress caused by the directional change onto the pipe.
SCH 80 45 Degree Elbow has high yield strengths compared to other schedules and the Buttweld Elbow 45 Degree is also stronger because of the manufacturing process involved. Elbow 45 Degree can be of different materials such as the Stainless Steel 45 Degree Elbow depending on the strength and other mechanical property requirements. A 45 Degree Mitered Elbow could either have one perpendicular joints or three dimensional joints. There are different pressure classes such as DIN 2605 45 Deg Elbow Type 3 to choose according to the pressure containment requirements as well.

ASME B16.9 Elbow Dimensions

Normal Pipe Size | Outside Daimeter D |
90 Deg Long Radius Center-to-End A |
45 Deg Long Radius Center-to-End B |
90 Deg 3D Center-to-End A |
45 Deg 3D Center-to-End B |
1/2 | 21.3 | 38 | 16 | – | – |
3/4 | 26.7 | 38 | 19 | 57 | 24 |
1 | 33.4 | 38 | 22 | 76 | 31 |
1¼ | 42.2 | 48 | 25 | 95 | 39 |
1½ | 48.3 | 57 | 29 | 114 | 47 |
2 | 60.3 | 76 | 35 | 152 | 63 |
2½ | 73 | 95 | 44 | 190 | 79 |
3 | 88.9 | 114 | 51 | 229 | 95 |
3½ | 101.6 | 133 | 57 | 267 | 111 |
4 | 114.3 | 152 | 64 | 305 | 127 |
5 | 141.3 | 190 | 79 | 381 | 157 |
6 | 168.3 | 229 | 95 | 457 | 189 |
8 | 219.1 | 305 | 127 | 610 | 252 |
10 | 273 | 381 | 159 | 762 | 316 |
12 | 323.8 | 457 | 190 | 914 | 378 |
14 | 355.6 | 533 | 222 | 1067 | 441 |
16 | 406.4 | 610 | 254 | 1219 | 505 |
18 | 457 | 686 | 286 | 1372 | 568 |
20 | 508 | 762 | 318 | 1524 | 632 |
22 | 559 | 838 | 343 | 1676 | 694 |
24 | 610 | 914 | 381 | 1829 | 757 |
26 | 660 | 991 | 406 | 1981 | 821 |
28 | 711 | 1067 | 438 | 2134 | 883 |
30 | 762 | 1143 | 470 | 2286 | 964 |
32 | 813 | 1219 | 502 | 2438 | 1010 |
34 | 864 | 1295 | 533 | 2591 | 1073 |
36 | 914 | 1372 | 565 | 2743 | 1135 |
38 | 965 | 1448 | 600 | 2896 | 1200 |
40 | 1016 | 1524 | 632 | 3048 | 1264 |
42 | 1067 | 1600 | 660 | 3200 | 1326 |
44 | 1118 | 1676 | 695 | 3353 | 1389 |
46 | 1168 | 1753 | 727 | 3505 | 1453 |
48 | 1219 | 1829 | 759 | 3658 | 1516 |
Carbon Steel 45 Degree Elbow Fitting Price List
Type Of Elbow |
Size |
Price In India |
45 Deg |
STD 1/2" |
162.41 |
45 Deg |
STD 3/4" |
117.29 |
45 Deg |
STD 1" |
152.41 |
45 Deg |
STD 11/4" |
189.48 |
45 Deg |
STD 11/2" |
216.54 |
45 Deg |
STD 2" |
279.70 |
45 Deg |
STD 21/2" |
514.29 |
45 Deg |
STD 3" |
721.81 |
45 Deg |
STD 4" |
1415.66 |
45 Deg |
STD 5" |
2345.89 |
45 Deg |
STD 6" |
3789.52 |
45 Deg |
STD 8" |
6947.45 |
Please note this is an approx Price of 45 degree elbow in India. For final 45 deg elbow Price Please Call on 91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.
IBR approved schedule 80 Stainless Steel 45 Degree Elbow Manufacturer In India Or BS1640 45 Degree Elbows Weight Calculation.
MSS SP-75 45 Degree Elbow Weight Calculator
Normal Pipe Size | LBS | Weight In Kilogram |
1/2 | 0.09 | 0.04 |
3/4 | 0.09 | 0.04 |
1 | 0.25 | 0.11 |
1.1/4 | 0.38 | 0.17 |
1.1/2 | 0.4 | 0.18 |
2 | 0.81 | 0.37 |
2.1/2 | 1.75 | 0.79 |
3 | 2.63 | 1.19 |
3.1/2 | 3.5 | 1.59 |
4 | 4.5 | 2.04 |
5 | 7.5 | 3.4 |
6 | 12 | 5.44 |
8 | 23 | 10.43 |
10 | 43 | 19.5 |
12 | 62 | 28.12 |
14 | 80 | 36.29 |
16 | 100 | 45.36 |
18 | 126 | 57.15 |
20 | 160 | 72.57 |
22 | 197 | 89.36 |
24 | 238 | 107.95 |
26 | 275 | 124.74 |
30 | 367 | 166.47 |
36 | 531 | 240.86 |
NPS | LBS | KG |
Stainless Steel 45 Degree Elbow Tolerances
45 Deg Elbow Tolerances | |||||||
For all fittings | 90/45 deg Elbows | 180 deg Returns | |||||
(NPS) | O.D. at Bevel |
I.D. at End |
Thickness Of Wall t / t1 |
Center to End Diameter A-B-C-M | Center to Center Diameter O |
Back to Face Dim. K |
Align- ment of Ends U |
1/2 a 2 1/2 | 1 | 0,8 | Not | 2 | 7 | 7 | 1 |
3 a 3 1/2 | 1 | 1,6 | less | 2 | 7 | 7 | 1 |
4 | +2 -1 | 1,6 | than | 2 | 7 | 7 | 1 |
5 a 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
8 | 2 | 1,6 | of nominal | 2 | 7 | 7 | 1 |
10 | +4 -3 | 3,2 | tickness | 2 | 7 | 7 | 2 |
12 a 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
20 a 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
26 a 30 | +7 -5 | 4,8 | 3 | ….. | ….. | ….. | |
32 a 48 | +7 -5 | 4,8 | 5 | ….. | ….. | ….. |
Popular Types of Buttweld Elbows 45 Deg We Supply, ASME B16.9 45 Deg Elbow Manufacturer In India.
45 Degree Elbow Fitting Standard Pattern
Size | 1/8" | 1/4" | 3/8" | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 4" | ||||||||||||
millimeter | in | millimeter | in | millimeter | in | millimeter | in | millimeter | in | millimeter | in | millimeter | in | millimeter | in | millimeter | in | millimeter | in | millimeter | in | millimeter | in | |
A | 15 | 0.59 | 16 | 0.63 | 18 | 0.71 | 20 | 0.79 | 24 | 0.94 | 27 | 1.06 | 31 | 1.22 | 34 | 1.34 | 39 | 1.54 | 46 | 1.81 | 52 | 2.05 | 63 | 2.48 |
B | 16 | 0.63 | 18.4 | 0.72 | 22 | 0.87 | 29 | 1.14 | 31.6 | 1.24 | 42 | 1.65 | 48.4 | 1.91 | 57 | 2.24 | 70 | 2.76 | 88 | 3.46 | 101 | 3.98 | 127.6 | 5.02 |
SCH 80 45 Degree Elbow Economic Pattern
SIZE | 1/8" | 1/4" | 3/8" | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2"(NPT) | 2-1/2"(PS) | 3" | 4" | |||||||||||||
mm | inches | mm | inches | mm | inches | mm | inches | mm | inches | mm | inches | mm | inches | mm | inches | mm | inches | mm | inches | mm | inches | mm | inches | mm | inches | |
A | 15 | 0.59 | 16 | 0.63 | 18 | 0.71 | 20 | 0.79 | 24 | 0.94 | 27 | 1.06 | 31 | 1.22 | 34 | 1.34 | 39 | 1.54 | 46 | 1.81 | 46 | 1.81 | 52 | 2.05 | 63 | 2.48 |
B | 13.9 | 0.55 | 17.4 | 0.69 | 20.9 | 0.82 | 24.9 | 0.98 | 31.2 | 1.23 | 38.1 | 1.5 | 47.4 | 1.87 | 54.1 | 2.13 | 66.6 | 2.62 | 80.1 | 3.15 | 82.4 | 3.24 | 95.9 | 3.78 | 121.8 | 4.8 |
Buy Stainless Steel 45 Degree Street Elbow At Best Price And Fast Delivery / 15mm 45 Degree Mitered Elbow Specification.
ASME B16.9 Elbow 45 Degree Specification
Specification: | ASME B16.9 45 Deg Elbow |
Type: | Butt Weld (BW), Seamless (SMLS) Welded |
Thickness: | Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc. |
Schedule: | Schedule 5 TO Schedule XXS. |
Size: | Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48” |
Standard | EN, ISO, DIN, JIS, NPT |
Type | Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross, |
Connection Type | Threaded/ Clamp End / End Bell / Weld/ Flange/ |
Pressure-Temperature Class | 150LB, 300LB, 600LB, 1500LB, 2500LB. |
Materials: | Inconel, Monel, Hastalloy, Alloy Steel, Brass, Bronze, Copper, Iron (Ductile/Cast), Carbon Steel, Titanium, Chrome-molybdenum, Nickel Alloys, Tantalum, Stainless Steel, Cupro-Nickel 90/10 & 70/30, Nickel. |
Type Of Dimension: | BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313 |
45 Degree Elbow Cutting Formula
- R1 = elbow radius marking 1
- R2 = elbow radius marking 2
- R3 = elbow radius marking 3
- (R1) - tan x 1 x (EC - 1/2 OD) x Deg = answar
- (R2) - tan x 1 x EC ... x Deg = answar
- (R3) - tan x 1 (EC + 1/2 OD) x deg = answar
EC = Elbow Center
OD = Outside Daimeter
R2 = Both Side Radius Marking
Formula:
45 Degree Elbow Take Off Formula
- Tan 22.5 = T.O / 1.5D
- T.O (Inches) = 0.621 D
- T.O (Millimeter) = 15.77 D
Well-known 1 Inch 45 Degree Sweep Elbows Supplier In Mumbai, India, Buy Din 2605 Type 3 45° Elbow Seamless and Welded Connection.
Different Types Of ASME B16.9 45 Deg Elbow

3 Inch, Ductile Iron, 45 degree pipe elbows

4 Inch, Butt Weld, Sch 40, 45 degree elbows

3 Inch, LR, Buttweld, Sch 20, 45 degree elbows

5 Inch, SMLS, Schedule 80, ASME B16.9 elbow 45 degree

1 in. Schedule 40 Carbon Steel 45 Degree Elbow Fitting

4 Inch, Sch 10, ASTM A403 WP321, Carbon Steel 45 Degree Elbow Fitting

26 Inch, LR, Sch 180, Stainless Steel 45 Deg Street Elbows

12 Inch, SCH 100, A403 WP316, 45 Deg Short Radius Elbows

15mm Din 2605, 45 Degree Compression Elbows

DN 15 to DN 1,400mm, ASME B16.9 Elbow 45 Deg

SCH160 Pressure, Long Radius SCH 80 45 Degree Elbows

SCH. 80, 6 Inch,ANSI B 16.9, Stainless Steel 45 Degree Elbows

ASTM A536, 100MM Schedule 10, Short Radius Elbow 45

Sch. XS, 10 inch, Buttweld Elbow 45 Degrees

OD70mm x WT2mm, Sch 120, 45 Degree Mitered Elbows
