180 Degree Elbow

Check Copper 180 Degree Elbow Dimensions And Weight Chart And Buttweld 180 Deg Stainless Steel Pipe Elbows Manufacturer In India.

What Is 180 Degree Elbow?

What Is 180 Degree Elbow?

ASME B16.9 Stainless Steel 180 Degree Elbows is a specification of elbows with a 180 degree change of direction. The ASME B16.9 elbow 180 degree belongs to a standard that governs the properties of NPS1/2 through NPS48. These are 180 Deg Elbow Dimensions ranging from ½ inch up to 48 inches. 180 Deg Elbow Weight depends on its dimensions and material. The Elbow 180 Sch 40 belongs to schedule 40. There are two types of elbows, the short radius one and the long radius one, denoted as the 180 Deg Elbow Short Radius and the 180 Deg Elbow Lr respectively.


Stainless Steel 180 Degree Elbows

Stainless Steel 180 Degree Elbows

ASME B16.9 180 Deg Elbow

ASME B16.9 180 Deg Elbow

Copper 180 Degree Elbow

Copper 180 Degree Elbow


Use Of Stainless Steel 180 Degree Elbows For Connecting Industrial Piping?

The category Elbow 180 Degree Sch 80 is stronger compared to others. These can also be produced as Buttweld Elbow 180 Degree for additional strength. The use cases of Elbow 180 Degree differ according to the needs. Industries like the chemical industries, water lines, marine environmental applications use the 180 Degree Elbow. The special makes such as the beveled 180 Degree Mitered Elbow are applied as per need.


Specification List Of Aluminum 180 Degree Elbow, Check ANSI B16.9 Elbow 180° Dimensions with Tolerances.

ASME B16.9 Elbow 180 Degree Specification


Specification: ASME B16.9 180 Deg Elbow
Standard EN, ISO, DIN, JIS, NPT
Schedule: Schedule 5 TO Schedule XXS.
Size: Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48”
Type Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross,
Connection Type Threaded/ Clamp End / End Bell / Weld/ Flange/
Materials: Brass, Bronze, Copper, Iron (Ductile/Cast), Carbon Steel, Titanium, Chrome-molybdenum, Nickel Alloys, Tantalum, Stainless Steel, Cupro-Nickel 90/10 & 70/30, Nickel, Inconel, Monel, Hastalloy, Alloy Steel.
Pressure-Temperature Class 150LB, 300LB, 600LB, 1500LB, 2500LB.
Type: Butt Weld (BW), Seamless (SMLS) Welded
Thickness: Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc.
Type Of Dimension: BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313

Check Most Popular Types Of Carbon Steel 180 Degree Elbow In Different Sizes And Schedule.

ASME B16.9 180 Deg Elbow

Stainless Steel 180 Deg Elbow Long Radius has a higher length and it makes the flow smooth by having a longer curve than the short radius one. 180 Degree Elbow Fitting is used to reverse the direction of fluid flow. The 180 Degree Pipe Elbow can be used with any type of piping as long as the dimensions and the mechanical property requirements match. The pressure classes also vary such as the DIN 2605 180 Deg Elbow Type 3.


180 Degree Elbow Dimensions Chart


180 Degree Elbow Dimensions Chart
Normal Pipe Sizes Outside Daimeter
D
180 deg Long Radius 180 deg Short Radius
Center to
Center
O
Back to
Face
K
Center to
Center
O
Back to
Face
K
1/2 21.3 76 48
3/4 26.7 76 51
1 33.4 76 56 51 41
1.1/4 42.2 95 70 64 52
1.1/2 48.3 114 83 76 62
2 60.3 152 106 102 81
2.1/2 73 190 132 127 100
3 88.9 229 159 152 121
3.1/2 101.6 267 184 178 140
4 114.3 305 210 203 159
5 141.3 381 262 254 197
6 168.3 457 313 305 237
8 219.1 610 414 406 313
10 273 762 518 508 391
12 323.8 914 619 610 467
14 355.6 1067 711 711 533
16 406.4 1219 813 813 610
18 457 1372 914 914 686
20 508 1524 1016 1016 762
22 559 1676 1118 1118 838
24 610 1829 1219 1219 914

ANSI B16.9 180 Degree Elbow Weight


Normal Pipe Size InInches ElbowLong Radius 180 Deg ElbowShort Radius 180 Deg
schedule 5S schedule 10S schedule 40S schedule 80S schedule 5S schedule 10S schedule 40S schedule 80S
1/2 0.05 0.06 0.08 0.10 0.03 0.04 0.05 0.07
3/4 0.06 0.07 0.09 0.11 0.04 0.05 0.06 0.07
1 0.09 0.15 0.18 0.20 0.06 0.10 0.12 0.13
1 1/4 0.13 0.20 0.25 0.35 0.09 0.13 0.17 0.12
1 1/2 0.18 0.30 0.40 0.50 0.12 0.20 0.27 0.33
2 0.30 0.50 0.70 0.180 0.20 0.33 0.47 0.60
2 1/2 0.60 0.85 1.35 1.80 0.40 0.60 0.180 1.20
3 0.180 1.30 2.00 2.180 0.60 0.180 1.35 1.180
4 1.40 2.00 4.00 5.180 0.180 1.35 2.65 3.180
5 2.180 3.60 6.50 9.70 1.95 2.40 4.35 6.50
6 4.00 5.00 10.5 16.0 2.70 3.35 7.00 10.5
8 7.40 10.0 21.5 33.5 4.180 6.70 14.5 22.5
10 13.6 16.8 38.5 52.5 9.10 11.2 25.6 35.0
12 23.4 27.0 59.0 79.0 15.6 18.0 39.5 53.0
14 29.0 35.0 70.0 94.0 19.3 23.5 47.0 63.0
16 41.3 47.0 95.0 125 27.5 31.5 63.5 84.0
18 51.8 59.0 120 158 34.5 39.5 80.0 105
20 73.0 85.0 146 194 49.0 57.0 98.0 129
24 122 140 210 282 82.0 94.0 140 188

Dimensional Tolerances Of 180 Degree Stainless Elbow


For all fittings Elbows 180 degree 180 degree Returns
(NPS) O.D. at Bevel I.D. at End Wall Thick. / t1 Center to End Dim. A-B-C-M Center to Center Dim.O Back to Face Dim.K Align- ment of EndsU
1/2 a 2 1/2 1 0,8 Not 2 7 7 1
3 a 3 1/2 1 1,6 less 2 7 7 1
4 +2 -1 1,6 than 2 7 7 1
5 a 6 +3 -1 1,6 87,50% 2 7 7 1
8 2 1,6 of nominal 2 7 7 1
10 +4 -3 3,2 tickness 2 7 7 2
12 a 18 +4 -3 3,2 3 10 7 2
20 a 24 +6 -5 4,8 3 10 7 2
26 a 30 +7 -5 4,8 3 ….. ….. …..
32 a 48 +7 -5 4,8 5 ….. ….. …..

View ASME B16.9 Elbow 180 Degree Pressure Rating Formula And Buy SABIC Approved 180 Deg Silicone Elbows.

180-Degree Return Bend Dimensions

180-Degree Return Bend Dimensions
NPSO.D.I.D.Wall
Thick.
Center
To Center
Back To FacePipe
Schedule
Weight
Pounds
1/20.840.6220.10931.88400.32
3/41.050.8240.1132.251.69400.34
11.311.0490.13332.19400.74
1 1/41.661.380.143.752.75401.1
1 1/21.91.610.1454.53.25401.6
22.382.0670.15464.19403.2
2 1/22.882.4690.2037.55.19406.1
33.53.0680.21696.25409.4
3 1/243.5480.22610.57.254012.8
44.54.0260.237128.254017.5
55.565.0470.2581510.314029.3
66.636.0650.281812.314047
88.637.9810.3222416.314087
1010.7510.020.3653020.3840164
1212.75120.3753624.38*237
141413.250.375422830311
161615.250.375483230408
181817.250.3755436*514
202019.250.375604020636

Refer 180 Degree Steel Pipe Elbow Price List In India, DIN 2605 Type 3 180 Deg Elbows Thickness Calculation.

Copper 180 Deg Elbow Pressure Chart

ServicePressure Temperature LimitsPressure Limits
condensate & Steam maximam 366oF (186oC),
min. 0oF (-18oC)
150 psig (1000 kPa)
gases & vapors, Air maximam 200oF (93oC),
min. 0oF (-18oC)
150 psig (1000 kPa)
Nonflammable Liquids maximam 250oF (121oC),
min. 0oF (-18oC)
350 psig (2300 kPa)

2 Inch 180 Degree Pipe Elbow Temperature Ratings

Pressure-Temperature ratings for ASME B16.9 fittings (psig)
Temperature RatingsPressure Class
150300
1/4 - 1 inch.1 1/4 - 2 inch.2 1/2 - 3 inch.
(oF)(oC)
-20 to 150 -29 to 66 300 2000 1500 1000
200 93 265 1785 1350 910
250 121 225 1575 1200 825
300 149 185 1360 1050 735
350 177 150 1150 900 650
400 204 - 935 750 560
450 232 - 725 600 475
500 260 - 510 450 385
550 288 - 300 300 300

Available Types Of Carbon Steel SCH 80 180 Degree Elbow


7 Inch, SCH-STD, ASTM A234 WPB, Stainless Steel 180 Degree Elbow

7 Inch, SCH-STD, ASTM A234 WPB, Stainless Steel 180 Degree Elbow

DN200, BW Ends, SCH 40, Type 3, 180 Degree Pipe Elbows

DN200, BW Ends, SCH 40, Type 3, 180 Degree Pipe Elbows

12 Inch, SCH 40, A234 WPB, 180 Degree Steel Pipe Elbows

12 Inch, SCH 40, A234 WPB, 180 Degree Steel Pipe Elbows

5 Inch, SCH 40, Din 2605, Copper 180 Degree Elbows

5 Inch, SCH 40, Din 2605, Copper 180 Degree Elbows


3 Inch, SCH 40S, BW, Stainless Steel 180 Degree Elbow

3 Inch, SCH 40S, BW, Stainless Steel 180 Degree Elbow

1 in. OD x Weld Straight 180 Degree Pipe Fittings

1 in. OD x Weld Straight 180 Degree Pipe Fittings

8 Inch, SCH 10S, BE, WP316L, 180 Degree Elbows

8 Inch, SCH 10S, BE, WP316L, 180 Degree Elbows

SCH 80, 300mm, Stainless Steel 180 Degree Elbows

SCH 80, 300mm, Stainless Steel 180 Degree Elbows


6 in. Flanged Schedule 120 180 Degree Steel Pipe Elbows

6 in. Flanged Schedule 120 180 Degree Steel Pipe Elbows

2 Inch, SCH 40, A234 WPB, 180 Degree Black Pipe Elbows

2 Inch, SCH 40, A234 WPB, 180 Degree Black Pipe Elbows

10 Inch, SCH 40, B16.9, Aluminum 180 Degree Elbows

10 Inch, SCH 40, B16.9, Aluminum 180 Degree Elbows

8 Inch, SCH 40, B16.9, Carbon Steel 180 Degree Elbows

8 Inch, SCH 40, B16.9, Carbon Steel 180 Degree Elbows


16 inch Sch 10S ASME B16.9 Elbow 180 Degree For Connecting Industrial Piping

16 inch Sch 10S ASME B16.9 Elbow 180 Degree For Connecting Industrial Piping

A403 WP316L, 14 Inch, ANSI B16.9, 180 Degree Compression Elbows

A403 WP316L, 14 Inch, ANSI B16.9, 180 Degree Compression Elbows

ASTM A403 WP316L, 3 Inch, SCH 80S, Buttweld Elbow 180 Degree

ASTM A403 WP316L, 3 Inch, SCH 80S, Buttweld Elbow 180 Degree

Thick. 0.375 Inch, BW End, Stainless Steel 180 Deg Elbows Thick. 0.375 Inch, BW End, Stainless Steel 180 Deg Elbows

Carbon Steel SCH 80 180 Degree Elbow is the most common one and is durable. The 180 Deg Street Elbow and the 180 Degree Compression Elbow are special classes of these elbows. 180 Deg Short Radius Elbow is applied in piping where the operational space is narrow and the pressure is not too high. ASME B16.9 Elbow 180 Deg comes in different material such as carbon steel or other alloys. Their mechanical properties, especially the nominal sizes and the pressure containment capacities are governed by schedules such as Elbow 180 Sch 10 and the Elbow 180 Sch 80.


About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy