Slip On Flange

Check ASME B16.5 Stainless Steel Slip On Flange Dimensions Class 150 To 2500 and SORF Flanges Weight Chart In KG.

Stainless Steel Slip On Flange

Stainless Steel Slip On Flange

ASME B16.5 Slip On Flanges

ASME B16.5 Slip On Flanges

Carbon Steel Slip On Flange

Carbon Steel Slip On Flange


What Is A Slip On Flange Used For?


Slip on Flanges are used in applications where the two pipes have to be held together with bolt and nut. The raised face helps bolting. They have to be welded on either side with fillet welding as well. There are different grades, classes and dimensions such as Stainless Steel slip on flange flat face and the slip on flange astm a105. There are other types such as Raised Faced Slip-On Flanges, the Flat Faced Slip-On Flanges and the  ASTM A182 SS as well. The types vary and the list goes on like the awwa class d slip on flanges, and carbon steel slip on flanges EN 1092-1.ASME B16.5 Slip On Flanges can vary in composition, design, forms and shapes but they are all used to connect two pipes, reducers, swages or elbows where the pressure is not so high.

Forged Steel Slip On Flanges

Forged Steel Slip On Flanges

Mild Steel Slip On Flange

Mild Steel Slip On Flange

Alloy Steel Slip On Flanges

Alloy Steel Slip On Flanges


 

Table of contents

difference between lap joint flange and slip on flange

What Is The Difference Between Lap Joint Flange And Slip On Flange?

  • Lap Joint Flanges : Stainless Steel Lap Joint Flange produce a variety of lap-joint flanges for use in different systems. The flanges belonging to the ANSI B16.5 group range from ½ inch to 24 inches in diameter. They can come with a flat face or with a raised face.

  • Slip On Flanges : ASME B16.5 Slip On Flanges belong to the b16.5 category which governs the sizes from 26 inches to 60 inches. It has a different set of pressure classes starting from class 75 up to 900. ASME B16.47 Series A and B SORF Flanges belong to the same category with the difference in their weight. Due to fewer holes, series A is heavier than series B.


Sorf Flange Specifications, EIL Approved Carbon Steel Slip On Flanges Manufacturer In India.


ASME B16.5 Slip On Flange Drawing

ASME B16.5 Slip On Flange Drawing

Class 150 Slip On Flange Dimensions

Normal Pipe Size Of Flanges (I.D.) Inside Diameter Outside Daimeter (O.D.) Circle Of Bolt (BC) Raised Face
(R)		 Raised Face
(RF)		 H Thickness Of Raised Face
(T)		 T1 Thickness Of Flat Face
(T2)		 Hole Of Bolt
(B)		 Number of
Bolt Holes
1/2 0.88 3.50 2.38 1.38 .063 1.19 .62 .38 .56 .62 4
3/4 1.09 3.88 2.75 1.69 .063 1.50 .62 .44 .56 .62 4
1 1.36 4.25 3.12 2.00 .063 1.94 .69 .50 .63 .62 4
1-1/4 1.70 4.62 3.50 2.50 .063 2.31 .81 .56 .75 .62 4
1-1/2 1.97 5.00 3.88 2.88 .063 2.56 .88 .62 .82 .62 4
2 2.44 6.00 4.75 3.62 .063 3.06 1.00 .69 .94 .75 4
2-1/2 2.94 7.00 5.50 4.12 .063 3.56 1.12 .82 1.06 .75 4
3 3.57 7.50 6.00 5.00 .063 4.25 1.19 .88 1.13 .75 4
3-1/2 4.07 8.50 7.00 5.50 .063 4.81 1.25 .88 1.19 .75 8
4 4.57 9.00 7.50 6.19 .063 5.31 1.31 .88 1.25 .75 8
5 5.66 10.00 8.50 7.31 .063 6.44 1.44 .88 1.38 .88 8
6 6.72 11.00 9.50 8.50 .063 7.56 1.56 .94 1.50 .88 8
8 8.72 13.50 11.75 10.62 .063 9.69 1.75 1.06 1.69 .88 8
10 10.88 16.00 14.25 12.75 .063 12.00 1.94 1.13 1.88 1.00 12
12 12.88 19.00 17.00 15.00 .063 14.38 2.19 1.19 2.13 1.00 12
14 14.14 21.00 18.75 16.25 .063 15.75 2.25 1.32 2.19 1.12 12
16 16.16 23.50 21.25 18.50 .063 18.00 2.50 1.38 2.44 1.12 16
18 18.18 25.00 22.75 21.00 .063 19.88 2.69 1.50 2.63 1.25 16
20 20.20 27.50 25.00 23.00 .063 22.00 2.88 1.63 2.83 1.25 20
22 22.22 29.50 27.25 25.25 .063 24.25 3.13 1.75 3.07 1.38 20
24 24.25 32.00 29.50 27.25 .063 26.12 3.25 1.82 3.19 1.38 20

Class 300 Slip On Flange Dimensions

Normal Pipe Size Of Flanges (I.D.) Inside Diameter Outside Daimeter (O.D.) Circle Of Bolt (BC) Raised Face
(R)		 Raised Face
(RF)		 H Thickness Of Raised Face
(T)		 T1 Thickness Of Flat Face
(T2)		 Hole Of Bolt
(B)		 Number of
Bolt Holes
1/2 0.88 3.75 2.62 1.38 .063 1.50 0.88 0.50 0.82 0.62 4
3/4 1.09 4.62 3.25 1.69 .063 1.88 1.00 .056 0.94 0.75 4
1 1.36 4.88 3.50 2.00 .063 2.12 1.06 0.63 1.00 0.75 4
1-1/4 1.70 5.25 3.88 2.50 .063 2.50 1.06 0.69 1.00 0.75 4
1-1/2 1.95 6.12 4.50 2.88 .063 2.75 1.19 0.75 1.13 0.88 4
2 2.44 6.50 5.00 3.62 .063 3.31 1.31 0.82 1.25 0.75 8
2-1/2 2.94 7.50 5.88 4.12 .063 3.94 1.50 0.94 1.44 0.88 8
3 3.57 8.25 6.62 5.00 .063 4.62 1.69 1.06 1.63 0.88 8
3-1/2 4.07 9.00 7.25 5.50 .063 5.25 1.75 1.13 1.69 0.88 8
4 4.57 10.00 7.88 6.19 .063 5.75 1.88 1.19 1.82 0.88 8
5 5.66 11.00 9.25 7.31 .063 7.00 2.00 1.32 1.94 0.88 8
6 6.72 12.50 10.62 8.50 .063 8.12 2.06 1.38 2.00 0.88 12
8 8.72 15.00 13.00 10.62 .063 10.25 2.44 1.56 2.38 1.00 12
10 10.88 17.50 15.25 12.75 .063 12.62 2.62 1.82 2.56 1.12 16
12 12.88 20.50 17.75 15.00 .063 14.75 2.88 1.94 2.82 1.25 16
14 14.14 23.00 20.25 16.25 .063 16.75 3.00 2.06 2.94 1.25 20
16 16.16 25.50 22.50 18.50 .063 19.00 3.25 2.19 3.19 1.38 20
18 18.18 28.00 24.75 21.00 .063 21.00 3.50 2.32 3.44 1.38 24
20 20.20 30.50 27.00 23.00 .063 23.12 3.75 2.44 3.69 1.38 24
22 22.22 33.00 29.25 25.25 .063 25.25 4.00 2.57 3.94 1.63 24
24 24.25 36.00 32.00 27.25 .063 27.62 4.19 2.69 4.13 1.62 24

Class 400 Slip On Flange Dimensions

Normal Pipe Size Of Flanges Inside Daimeter (I.D.) Outside Daimeter (O.D.) Circle Of Bolt (BC) Raised Face (R) Raised Face (RF) H Thickness Of Raised Face
(T)		 T1 Thickness Of Flat Face
(T2)		 Hole Of Bolt (B) Number of Bolt Holes
1/2 0.88 3.75 2.62 1.38 .250 1.50 1.13 0.56 0.88 0.62 4
3/4 1.09 4.62 3.25 1.69 .250 1.88 1.25 0.62 1.00 0.75 4
1 1.36 4.88 3.50 2.00 .250 2.12 1.31 0.69 1.06 0.75 4
1-1/4 1.70 5.25 3.88 2.50 .250 2.50 1.37 0.81 1.12 0.75 4
1-1/2 1.95 6.12 4.50 2.88 .250 2.75 1.50 0.88 1.25 0.88 4
2 2.44 6.50 5.00 3.62 .250 3.31 1.69 1.00 1.44 0.75 8
2-1/2 2.94 7.50 5.88 4.12 .250 3.94 1.87 1.12 1.62 0.88 8
3 3.57 8.25 6.62 5.00 .250 4.62 2.06 1.25 1.81 0.88 8
3-1/2 4.07 9.00 7.25 5.50 .250 5.25 2.19 1.38 1.94 1.00 8
4 4.57 10.00 7.88 6.19 .250 5.75 2.25 1.38 2.00 1.00 8
5 5.66 11.00 9.25 7.31 .250 7.00 2.37 1.50 2.12 1.00 8
6 6.72 12.50 10.62 8.50 .250 8.12 2.50 1.62 2.25 1.00 12
8 8.72 15.00 13.00 10.62 .250 10.25 2.94 1.88 2.69 1.12 12
10 10.88 17.50 15.25 12.75 .250 12.62 3.13 2.12 2.88 1.25 16
12 12.88 20.50 17.75 15.00 .250 14.75 3.37 2.25 3.12 1.38 16
14 14.14 23.00 20.25 16.25 .250 16.75 3.56 2.38 3.31 1.38 20
16 16.16 25.50 22.50 18.50 .250 19.00 3.94 2.50 3.69 1.50 20
18 18.18 28.00 24.75 21.00 .250 21.00 4.13 2.62 3.88 1.50 24
20 20.20 30.50 27.00 23.00 .250 23.12 4.25 2.75 4.00 1.62 24
22 22.22 33.00 29.25 25.25 .250 25.25 4.50 2.88 4.25 1.75 24
24 24.25 36.00 32.00 27.25 .250 27.62 4.75 3.00 4.50 1.88 24

Class 600 Slip On Flange Dimensions

Normal Pipe Size Of Flanges Inside Daimeter (I.D.) Outside Daimeter (O.D.) Circle Of Bolt (BC) Raised Face (R) Raised Face (RF) H Thickness Of Raised Face
(T)		 T1 Thickness Of Flat Face
(T2)		 Hole Of Bolt (B) Number of Bolt Holes
1/2 0.88 3.75 2.62 1.38 .250 1.50 1.13 0.56 0.88 0.62 4
3/4 1.09 4.62 3.25 1.69 .250 1.88 1.25 0.62 1.00 0.75 4
1 1.36 4.88 3.50 2.00 .250 2.12 1.31 0.69 1.06 0.75 4
1-1/4 1.7 5.25 3.88 2.50 .250 2.50 1.37 0.81 1.12 0.75 4
1-1/2 1.95 6.12 4.50 2.88 .250 2.75 1.50 0.88 1.25 0.88 4
2 2.44 6.50 5.00 3.62 .250 3.31 1.69 1.00 1.44 0.75 8
2-1/2 2.94 7.50 5.88 4.12 .250 3.94 1.87 1.12 1.62 0.88 8
3 3.57 8.25 6.62 5.00 .250 4.62 2.06 1.25 1.81 0.88 8
3-1/2 4.07 9.00 7.25 5.50 .250 5.25 2.19 1.38 1.94 1.00 8
4 4.57 10.75 8.50 6.19 .250 6.00 2.37 1.5 2.12 1.00 8
5 5.66 13.00 10.50 7.31 .250 7.44 2.63 1.75 2.38 1.12 8
6 6.72 14.00 11.50 8.50 .250 8.75 2.87 1.88 2.62 1.12 12
8 8.72 16.50 13.75 10.62 .250 10.75 3.25 2.19 3.00 1.25 12
10 10.88 20.00 17.00 12.75 .250 13.5 3.63 2.50 3.38 1.38 16
12 12.88 22.00 19.25 15.00 .250 15.75 3.87 2.62 3.62 1.38 20
14 14.14 23.75 20.75 16.25 .250 17.00 3.94 2.75 3.69 1.50 20
16 16.16 27.00 23.75 18.50 .250 19.50 4.44 3.00 4.19 1.62 20
18 18.18 29.25 25.75 21.00 .250 21.50 4.87 3.25 4.62 1.75 20
20 20.20 32.00 28.50 23.00 .250 24.00 5.25 3.50 5.00 1.75 24
22 22.22 34.25 30.63 25.25 .250 26.25 5.50 3.75 5.25 1.75 24
24 24.25 37.00 33.00 27.25 .250 28.25 5.75 4.00 5.50 2.00 24

Class 900 Slip On Flange Dimensions

Normal Pipe Size Of Flanges Inside Daimeter (I.D.) Outside Daimeter (O.D.) Circle Of Bolt (BC) Raised Face (R) Raised Face (RF) H Thickness Of Raised Face
(T)		 T1 Thickness Of Flat Face
(T2)		 Hole Of Bolt (B) Number of Bolt Holes
3 3.57 9.50 7.50 5.00 .250 5.00 2.38 1.50 2.13 1.00 8
4 4.57 11.50 9.25 6.19 .250 6.25 3.00 1.75 2.75 1.25 8
5 5.66 13.75 11.00 7.31 .250 7.50 3.38 3.00 3.13 1.38 8
6 6.72 15.00 12.50 8.50 .250 9.25 3.63 2.19 3.38 1.25 12
8 8.72 18.50 15.50 10.63 .250 11.75 4.25 2.50 4.00 1.50 12
10 10.88 21.50 18.50 12.75 .250 14.50 4.50 2.75 4.25 1.50 16
12 12.88 24.00 21.00 15.00 .250 16.50 4.88 3.13 4.63 1.50 20
14 14.14 25.25 22.00 16.25 .250 17.75 5.38 3.38 5.13 1.63 20
16 16.16 27.75 24.25 18.50 .250 20.00 5.50 3.50 5.25 1.75 20
18 18.18 31.00 27.00 21.00 .250 22.25 6.25 4.00 6.00 2.00 20
20 20.20 33.75 29.50 23.00 .250 24.50 6.50 4.25 6.25 2.13 20
24 24.25 41.00 35.50 27.25 .250 29.50 8.25 5.50 8.00 2.63 20

Class 1500 Slip On Flange Dimensions

Normal Pipe Size Of Flanges Inside Daimeter (I.D.) OD Bolt Circle (BC) Raised Face (R) Raised Face (RF) H Raised Face Thickness (T) T1 Flat Face Thickness (T2) Bolt Hole (B) No. of Bolt Holes
1/2 0.88 4.75 3.25 1.38 .250 1.50 1.50 0.88 1.25 0.88 4
3/4 1.09 5.13 3.50 1.69 .250 1.75 1.63 1.00 1.38 0.88 4
1 1.36 5.88 4.00 2.00 .250 2.06 1.88 1.13 1.63 1.00 4
1-1/4 1.70 6.25 4.38 2.50 .250 2.50 1.88 1.13 1.63 1.00 4
1-1/2 1.95 7.00 4.88 2.88 .250 2.75 2.00 1.25 1.75 1.13 4
2 2.44 8.50 6.50 3.63 .250 4.13 2.50 1.50 2.25 1.00 8
2-1/2 2.94 9.63 7.50 4.13 .250 4.88 2.75 1.63 2.50 1.13 8
3 ** 3.57 10.50 8.00 5.00 .250 5.25 3.13 1.88 2.88 1.25 8
4 ** 4.57 12.25 9.50 6.19 .250 6.38 3.81 2.13 3.56 1.38 8
5 ** 5.66 14.75 11.50 7.31 .250 7.75 4.38 2.88 4.13 1.63 8
6 ** 6.72 15.50 12.50 8.50 .250 9.00 4.94 3.25 4.69 1.50 12
8 ** 8.72 19.00 15.50 10.63 .250 11.50 5.88 3.63 5.63 1.75 12
10 ** 10.88 23.00 19.00 12.75 .250 14.50 6.50 4.25 6.25 2.00 12
12 ** 12.88 26.50 22.50 15.00 .250 17.75 7.38 4.88 7.13 2.13 16

How Install Welding Slip-on Flanges To Pipe? View Slip On Forged Steel Flange Price List In Mumbai, India.


Class 2500 Slip On Flange Dimensions

Normal Pipe Size Of Flanges Inside Daimeter (I.D.) Outside Diameter (O.D.) Circle Of Bolt (BC) Raised Face (R) Raised Face (RF) H Thickness Of Raised Face (T) T1 Thickness Of Flat Face (T2) Bolt Hole (B) Number of Bolt Holes
1/2 0.88 5.25 3.50 1.38 .250 1.69 1.81 1.19 1.56 0.88 4
3/4 1.09 5.50 3.75 1.69 .250 2.00 1.94 1.25 1.69 0.88 4
1 1.36 6.25 4.25 2.00 .250 2.25 2.13 1.38 1.88 1.00 4
1-1/4 1.70 7.25 5.13 2.50 .250 2.88 2.31 1.50 2.06 1.13 4
1-1/2 1.95 8.00 5.75 2.88 .250 3.13 2.63 1.75 2.38 1.25 4
2 2.44 9.25 6.75 3.63 .250 3.75 3.00 2.00 2.75 1.13 8
2-1/2 2.94 10.50 7.75 4.13 .250 4.50 3.38 2.25 3.13 1.25 8
3 3.57 12.00 9.00 5.00 .250 5.25 3.88 2.63 3.63 1.38 8
4 4.57 14.00 10.75 6.19 .250 6.50 4.50 3.00 4.25 1.63 8
5 5.66 16.50 12.75 7.31 .250 8.00 5.38 3.63 5.13 1.88 8
6 6.72 19.00 14.50 8.50 .250 9.25 6.25 4.25 6.00 2.13 8
8 8.72 21.75 17.25 10.63 .250 12.00 7.25 5.00 7.00 2.13 12
10 10.88 26.50 21.25 12.75 .250 14.75 9.25 6.50 9.00 2.63 12
12 12.88 30.00 24.38 15.00 .250 17.38 10.25 7.25 10.00 2.88 12
Carbon Steel A105 Slip On Flange Price List
Type Of Flanges Size In (Inches) Material Class Price In India (INR)
Slip On Flanges 2" ASTM A105 Class 150 230.34
SORF 3" ASTM A105 Class 150 370.34
SORF 10" ASTM A105 Class 150 2100.34
SORF 20" ASTM A105 Class 150 8000
SORF 24" ASTM A105 Class 300 9500.24
SORF 26" ASTM A105 Class 300 11000.76
Buy Now
Stainless Steel A182 F304 Slip On Flange Price List
Type Of Flanges Size In (MM) Aprox. Wt/Unit Material Class Price In India (INR)
Slip On Flanges 20mm 0.61 ASTM A182 F304 Class 150 462.50
SORF 32mm 1.13 ASTM A182 F304 Class 150 761.25
SORF 40mm 1.48 ASTM A182 F304 Class 150 828.75
SORF 50mm 2.37 ASTM A182 F316 Class 300 1356.25
SORF 80MM 4.10 ASTM A182 F316 Class 300 3187.50
Buy Now
ASME B16.5 Stainless Steel Slip On Flange Manufacturer in India

Please note this is an approx Price of A ASTM A105 Slip On Flange in Mumbai, India. For final Stainless Steel Slip On Flange Price List Please Call on 91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com


Stainless Steel Slip On Flange Weight

Nominal Pipe Sizes (NPS) Slip On (SORF) Threaded (NPT) Socket Weld (SWRF) Lap Joint (Loose) Blind (BLRF) Weld Neck (WRNR)
½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
1¼ 3 3 3 3 3 3
1½ 3 3 3 3 4 4
2 5 5 5 5 5 6
2½ 8 8 8 8 7 10
3 9 9 9 9 9 11.5
3½ 11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268

Large Diameter Slip On Flange Material Specification As Per ANSI B16.5

Material Specification Of : ASME B16.5 Slip On Flange
Standard Cover : pressure ratings & temperature ratings, materials, marking, dimensions, weight, tolerances, testing
European Standard Flanges JIS B2220 Flanges (5k to 30k) and KS1503 flanges
Russian-Standard Flanges GOST 12820 / 12821-80, DIN, UNI, EN 1092-1
South African Standard Flanges SANSflanges And SABS flanges
Surface Finish smooth, concentric serrated, stock
Gaskets Types Full Face Gasket
Flat Ring Gasket
Metallic Ring Gakset
Advantages Of Pipe Flange Used to Connect Pipe System
Easy Repair Pipe System
Assembled Without Welding
Contact Faces RTJ (Ring Type Joint), FF (Flat Face), RF (Raised Face), T/G (Tongue And Groove ), M/F (Male And Female)
Size Chart Normal Pipe Size 1/2 to NPS 24"
Materials Stainless Steel (Grade 304/L, 316/L), Carbon Steel (ASTM A105 And ASTM A350), Alloy Steel (ASTM A182), Mild Steel, Duplex Steel, Pressure Vessel Steel, Titanium, Super Duplex Steel, Nickel Alloy, Monel, Inconel, Hastelloy, Copper Nickel, Cast Iron, Wrought Iron.
Thickness Normal Pipe Size ≤ 18
Bore Diameter Normal Pipe ≤ 10
Flanges Standards EN 1092-1, JIS, ASME B16.5, ASME B16.47 type A, UNI, DIN
Pressure Rating Class 150 To Class 2500
High Temperature Above 200°C (400°F) For Class 150 Or Above 400°C (750°F)
Low Temperature Above -29 Degree C (−20°F)
Common Types Of Flanges: Slip On (SORF), Weld Neck (WNRF), Blind (BLRF), Lap Joint (Loose), Threaded (NPT), Socket-Weld (SWRF)
Special Types Of Flanges : Nipoflange, Elboflange, Latroflange, Swivel Flange, Expanding Flange, Reducing Flange, Weldoflange
Marking Standard Name of Manufacturer
Schedule
Type of Flange Facing
Nominal Pipe Size
Pressure Class
ASME B16 Designation
Bolt Type high strength bolts
medium strength bolts
low strength bolts

Largest Independent Alloy Steel/ Aluminum/ Copper Nickel/ Mild Steel Slip On Flange Supplier In India.

Slip On Flange High Pressure

ASME B16.5 Slip On Flange Pressure Pressure
Temperature (°C)
Class
Class 150Class 300Class 400Class 600Class 900Class 1500Class 2500
-29 - 38 19.8 51.7 68.9 103.4 155 259 431
50 19.5 51.7 68.9 103.4 155 259 431
100 17.7 51.5 68.7 103.0 155 258 429
150 15.8 50.2 66.8 100.3 151 251 418
200 13.8 48.6 64.8 97.2 146 243 405
250 12.1 46.3 61.7 92.7 139 232 386
300 10.2 42.9 57.0 85.7 129 214 357
325 9.3 41.4 55.0 82.6 124 207 344
350 8.4 40.0 53.4 80.0 120 200 334
375 7.4 37.8 50.4 75.7 114 189 315
400 6.5 34.7 46.3 69.4 104 174 290
425 5.5 28.8 38.4 57.5 86.3 144 240
450 4.6 23.0 30.7 46.0 69.0 115 192
475 3.7 17.1 22.8 34.2 51.3 85.4 142
500 2.8 11.6 15.4 23.2 34.7 57.9 96.5
538 1.4 5.9 7.9 11.8 17.7 29.5 49.2

Slip-On Flange Bolt Size

Class 150 Flanges Class 300 Flanges Class 600 Flanges
NPS # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length
1/16 RF RTJ 1/16 RF RTJ 1/4 RF RTJ
1/2 4 0.50 2-1/4 – 4 0.50 2-1/2 3 4 0.50 3 3
3/4 4 0.50 2-1/2 – 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1 4 0.50 2-1/2 3 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1-1/4 4 0.50 2-3/4 3-1/4 4 0.63 3-1/4 3-3/4 4 0.63 3-3/4 3-3/4
1-1/2 4 0.50 2-3/4 3-1/4 4 0.75 3-1/2 4 4 0.75 4-1/4 4-1/4
2 4 0.63 3-1/4 3-3/4 8 0.63 3-1/2 4 8 0.63 4-1/4 4-1/4
2-1/2 4 0.63 3-1/2 4 8 0.75 4 4-1/2 8 0.75 4-3/4 4-3/4
3 4 0.63 3-1/2 4 8 0.75 4-1/4 4-3/4 8 0.75 5 5
3-1/2 8 0.63 3-1/2 4 8 0.75 4-1/4 5 8 0.88 5-1/2 5-1/2
4 8 0.63 3-1/2 4 8 0.75 4-1/2 5 8 0.88 5-3/4 5-3/4
5 8 0.75 3-3/4 4-1/4 8 0.75 4-3/4 5-1/4 8 1.00 6-1/2 6-1/2
6 8 0.75 4 4-1/2 12 0.75 4-3/4 5-1/2 12 1.00 6-3/4 6-3/4
8 8 0.75 4-1/4 4-3/4 12 0.88 5-1/2 6 12 1.13 7-1/2 7-3/4
10 12 0.88 4-1/2 5 16 1.00 6-1/4 6-3/4 16 1.25 8-1/2 8-1/2
12 12 0.88 4-3/4 5-1/4 16 1.13 6-3/4 7-1/4 20 1.25 8-3/4 8-3/4
14 12 1.00 5-1/4 5-3/4 20 1.13 7 7-1/2 20 1.38 9-1/4 9-1/4
16 16 1.00 5-1/4 5-3/4 20 1.25 7-1/2 8 20 1.50 10 10
18 16 1.13 5-3/4 6-1/4 24 1.25 7-3/4 8-1/4 20 1.63 10-3/4 10-3/4
20 20 1.13 6-1/4 6-3/4 24 1.25 8 8-3/4 24 1.63 11-1/4 11-1/2
24 20 1.25 6-3/4 7-1/4 24 1.50 9 10 24 1.88 13 13-1/4

 

Class 900 Flanges Class 1500 Flanges Class 2500 Flanges
NPS # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length # Bolts And Studs Diameter of Bolts And Studs Stud Length
1/4 RF RTJ 1/4 RF RTJ 1/4 RF RTJ
1/2 4 0.75 4-1/4 4-1/4 4 0.75 4-1/4 4-1/4 4 0.75 4-3/4 4-3/4
3/4 4 0.75 4-1/2 4-1/2 4 0.75 4-1/2 4-1/2 4 0.75 5 5
1 4 0.88 5 5 4 0.88 5 5 4 0.88 5-1/2 5-1/2
1-1/4 4 0.88 5 5 4 0.88 5 5 4 1.00 6 6
1-1/2 4 1.00 5-1/2 5-1/2 4 1.00 5-1/2 5-1/2 4 1.13 6-3/4 6-3/4
2 8 0.88 5-3/4 5-3/4 8 0.88 5-3/4 5-3/4 8 1.00 7 7
2-1/2 8 1.00 6-1/4 6-1/4 8 1.00 6-1/4 6-1/4 8 1.13 7-3/4 8
3 8 0.88 5-3/4 5-3/4 8 1.13 7 7 8 1.25 8-3/4 9
4 8 1.13 6-3/4 6-3/4 8 1.25 7-3/4 7-3/4 8 1.50 10 10-1/4
5 8 1.25 7-1/2 7-1/2 8 1.50 9-3/4 9-3/4 8 1.75 11-3/4 12-1/4
6 12 1.13 7-1/2 7-3/4 12 1.38 10-1/4 10-1/2 8 2.00 13-1/2 14
8 12 1.38 8-3/4 8-3/4 12 1.63 11-1/2 11-3/4 12 2.00 15 15-1/2
10 16 1.38 9-1/4 9-1/4 12 1.88 13-1/4 13-1/2 12 2.50 19-1/4 20
12 20 1.38 10 10 16 2.00 14-3/4 15-1/4 12 2.75 21-1/4 22
14 20 1.50 10-3/4 11 16 2.25 16 16-3/4 – – – –
16 20 1.63 11-1/4 11-1/2 16 2.50 17-1/2 18-1/2 – – – –
18 20 1.88 12-3/4 13-1/4 16 2.75 19-1/2 20-3/4 – – – –
20 20 2.00 13-3/4 14-1/4 16 3.00 21-1/4 22-1/4 – – – –
24 20 2.50 17-1/4 18 16 3.50 24-1/4 25-1/2 – – – –

Reducing Slip On Flange Thickness Chart

ASME B16.5 Slip On Flange Flange Wall Thickness
NPS (Normal Pipe Sizes) Outside Daimeter (O.D.) Schedule 10 Schedule 20 Schedule 30 STD Wall Schedule 40 Schedule 60 EXT Hvy Schedule 80 Schedule 100 Schedule 120 Schedule 140 Schedule 160 XX Hvy
½ 0.84 0.083 ... ... 0.109 0.109 ... 0.147 0.147 ... ... ... 0.188 0.294
¾ 1.05 0.083 ... ... 0.113 0.113 ... 0.154 0.154 ... ... ... 0.219 0.308
1 1.315 0.109 ... ... 0.133 0.133 ... 0.179 0.179 ... ... ... 0.25 0.358
1 ¼ 1.66 0.109 ... ... 0.14 0.14 ... 0.191 0.191 ... ... ... 0.25 0.382
1 ½ 1.9 0.109 ... ... 0.145 0.145 ... 0.2 0.2 ... ... ... 0.281 0.4
2 2.375 0.109 ... ... 0.154 0.154 ... 0.218 0.218 ... ... ... 0.344 0.436
2 ½ 2.875 0.12 ... ... 0.203 0.203 ... 0.276 0.276 ... ... ... 0.375 0.552
3 3.5 0.12 ... ... 0.216 0.216 ... 0.3 0.3 ... ... ... 0.438 0.6
3 ½ 4 0.12 ... ... 0.226 0.226 ... 0.318 0.318 ... ... ... ... 0.636
4 4.5 0.12 ... ... 0.237 0.237 ... 0.337 0.337 ... 0.438 ... 0.531 0.674
5 5.563 0.134 ... ... 0.258 0.258 ... 0.375 0.375 ... 0.5 ... 0.625 0.75
6 6.625 0.134 ... ... 0.28 0.28 ... 0.432 0.432 ... 0.562 ... 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 ...
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 ...
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 ...
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 ...
22 22 0.25 ... ... 0.375 ... ... 0.5 ... ... .... .... .... ....
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 ....
26 26 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
30 30 0.312 0.5 0.625 0.375 .... .... 0.5 .... .... .... .... .... ....
36 36 0.312 0.5 0.625 0.375 0.75 .... 0.5 .... .... .... .... .... ....
40 40 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
42 42 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..
48 48 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..

Slip-on Welding Steel Pipe Flange Size

DN In inchesDimensionASME B16.5 Dimensional Sizes 1/2 inches to 2 1/2 inches
125 LBS
150 LBS		300 LBS400 LBS600 LBS900 LBS1500 LBS2500 LBS
inchesmillimeterinchesmillimeterinchesmillimeterinchesmillimeterinchesmillimeterinchesmillimeterinchesmillimeter
1/2A3 1/288.93 3/495.23 3/495.23 3/495.24 3/41214 3/41215 1/4133.4
b7/1611.19/1614.39/1614.39/1614.37/822.27/822.21 3/1630.2
D21 3/834.91 3/834.91 3/834.91 3/834.91 3/834.91 3/834.91 3/834.9
D12 3/860.32 5/866.72 5/866.72 5/866.73 1/482.63 1/482.63 1/288.9
n44444444444-444
d5/815.95/815.95/815.95/815.97/822.27/822.27/822.2
3/4A3 7/898.44 5/8117.54 5/8117.54 5/8117.55 1/81305 1/81305 1/2139.7
b1/212.75/815.95/815.95/815.9125.4125.41 1/431.8
D21 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.9
D12 3/469.83 1/482.53 1/482.53 1/482.53 1/288.93 1/288.93 3/495.2
n44444444444-444
d5/815.93/4193/4193/4197/822.27/822.27/822.2
1A4 1/41084 7/8123.84 7/8123.84 7/8123.85 7/8149.25 7/8149.26 1/4159
b9/1614.311/1617.511/1617.511/1617.51 1/828.61 1/828.61 3/834.9
D2250.8250.8250.8250.8250.8250.8250.8
D13 1/879.43 1/288.93 1/288.93 1/288.9410241024 1/4108
n44444444444444
d5/815.93/4193/4193/419125.4125.4125.4
1 1/4A4 5/8117.55 1/4133.45 1/4133.45 1/4133.46 1/41596 1/41597 1/4184.2
b5/815.93/41913/1620.613/1620.61 1/828.61 1/828.61 1/238.1
D22 1/263.52 1/263.52 1/263.52 1/263.52 1/263.52 1/263.52 1/263.5
D13 1/288.93 7/898.43 7/898.43 7/898.44 3/81114 3/81115 1/8130
n44444444444444
d5/815.93/4193/4193/419125.4125.41 1/828.6
1 1/2A51276 1/8155.66 1/8155.66 1/8155.67177.87177.88203
b11/1617.513/1620.67/822.27/822.21 1/431.81 1/431.81 3/444.5
D22 7/873 982 7/8732 7/8732 7/8732 7/8732 7/8732 7/873
D13 7/844 1/21144 1/21144 1/21144 7/81244 7/81245 3/4146
n44444444444444
d5/8. 15.97/822.27/822.27/822.21 1/828.61 1/828.61 1/431.8
2A6152.46 1/2165.16 1/2165.16 1/2165.18 1/2215.98 1/2215.99 1/4234.9
b3/4197/822.2125.4125.41 1/238.11 1/238.1250.8
D23 5/892.13 5/892.13 5/892.13 5/892.13 5/892.13 5/892.13 5/892.1
D14 3/41215127512751276 1/2165.16 1/2165.16 3/4171
n44888888888888
d3/4193/4193/4193/419125.4125.41 1/828.6
2 1/2A7177.87 1/2190.57 1/2190.57 1/2190.59 5/82449 5/824410 1/2266.7
b7/822.2125.41 1/828.61 1/828.61 5/841.31 5/841.32 1/457.2
D24 1/8104.84 1/8104.84 1/8104.84 1/8104.84 1/81054 1/81054 1/8105
D15 1/2139.75 7/8149.25 7/8149.25 7/8149.27 1/2190.57 1/2190.57 3/4197
n44888888888888
d3/4197/822.27/822.27/822.21 1/828.61 1/828.61 1/431.8

Slip On Flange Tolerances

ASME B16.5Tolerance
A Outside Diameter (O.D.)
  • When Outside Diameter (O.D.) is 24" or less: ±1/16" (1.6 mm)
  • When Outside Diameter (O.D.) is over 24": ±1/8" (3.2 mm)
D Inside Diameter
  • 10" and smaller: ±1/32" (0.8 millimeter)
  • 12" thru 18": +1/8" (3.2 millimeter)
  • 20" and larger: -1/16" (1.6 millimeter)
B Diameter of contact face
  • 1/16" raised face: ±1/32" (0.8 millimeter)
  • 1/4" Raised Face (RF), Tongue & Groove (T/G), (male & female), (m/f): ±1/64" (0.4 mm)
J Diameter of hub at base
  • When hub base is 24" or smaller: ±1/16" (1.6 millimeter)
  • When hub base is over 24": ±1/8" (3.2 millimeter)
H Diameter of hub at point of welding
  • 5" and smaller: +3/32" (2.4 millimeter), -1/32" (0.8 millimeter)
  • 6" and larger: +5/32" (4.0 millimeter), -1/32 (0.8 millimeter)
P Drilling
  • Bolt circle: ±1/16" (1.6 millimeter)
  • Bolt hole spacing: ±1/32" (0.8 millimeter)
  Eccentricity of bolt circle with respect to facing
  • 2 1/2" and smaller ±1/32" (0.8 millimeter) max.
  • 3" and larger ±1/16" (1.6 millimeter) max.
C Thickness
  • 18" and smaller: ±1/8" (3.2 millimeter), -0"
  • 20" and larger: ±3/16" (4.8 millimeter), -0"
K Length of hub
  • 10" and smaller: ±1/16" (1.6 millimeter)
  • 12" and larger: ±1/8" (3.2 millimeter)

DIN 2573 PN6 Slip On Flange Dimensions

DIN 2573 PN6 Slip On Flange Dimensions

Normal Pipe Size Flange Screws/ Threaded Weight In Kilogram
(7,85 Kg/dm3)
Rated
Diameter 		d1 d5 D b c k Holes Thread d2 Kg
ISO Series 1 DIN Series 2
15 - 20 21 80 12 5 55 4 M 10 11 0,41
21,3 - 22
20 - 25 26 90 14 5 65 4 M 10 11 0,60
26,9 - 27,6
25 - 30 31 100 14 5 75 4 M 10 11 0,74
33,7 - 34,4
32 - 38 39 120 16 5 90 4 M 12 14 1,19
42,4 - 43,1
40 - 44,5 45,5 130 16 5 100 4 M 12 14 1,39
48,3 - 49
50 - 57 58,1 140 16 6 110 4 M 12 14 1,53
60,3 - 61,1
65 76,1 - 77,1 160 16 6 130 4 M 12 14 1,89
80 88,9 - 90,3 190 18 7 150 4 M 16 18 2,98
100 - 108 109,6 210 18 7 170 4 M 16 18 3,46
114,3 - 115,9
125 - 133 134,8 240 20 7 200 8 M 16 18 4,60
139,7 - 141,6
150 - 159 161,1 265 20 7 225 8 M 16 18 5,22
168,3 - 170,5
200 219,1 - 221,8 320 22 7 280 8 M 16 18 7,15
250 - 267 270,2 375 24 7 335 12 M 16 18 9,61
273 - 276,2
300 323,9 - 327,6 440 24 7 395 12 M 20 22 12,60
350 355,6 - 359,7 490 26 7 445 12 M 20 22 15,60
- 368 372,2
400 406,4 - 411 540 28 7 495 16 M 20 22 18,40
- 419 423,7
(450)* 457 - 462,5 595 30 7 550 16 M 20 22 21,40
500 508 - 531,6 645 30 7 600 20 M 20 22 24,60

DIN 2576 PN10 Slip On Flange Dimensions

DIN 2576 PN10 Slip On Flange Dimensions

Normal Pipe Sizes Flange Screws/Threaded Weight In Kilogram
(7,85 Kg/dm3)
Rated
Diameter 		d1 d5 D b c k Holes Thread d2 Kg
ISO Series 1 DIN Series 2
15 - 20 21 95 14 5 65 4 M 12 14 0,675
21,3 - 22 0,669
20 - 25 26 105 16 5 75 4 M 12 14 0,749
26,9 - 27,6 0,936
25 - 30 31 115 16 5 85 4 M 12 14 1,14
33,7 - 34,4 1,11
32 - 38 39 140 16 5 100 4 M 16 18 1,66
42,4 - 43,1 1,62
40 - 44,5 45,5 150 16 5 110 4 M 16 18 1,89
48,3 - 49 1,86
50 - 57 58,1 165 18 6 125 4 M 16 18 2,51
60,3 - 61,1 2,47
65 76,1 - 77,1 185 18 6 145 4 M 16 18 3
80 88,9 - 90,3 200 20 7 160 8 M 16 18 3,79
100 - 108 109,6 220 20 7 180 8 M 16 18 4,2
114,3 - 115,9 4,03
125 - 133 134,8 250 22 7 210 8 M 16 18 5,71
139,7 - 141,6 5,46
150 - 159 161,1 285 22 7 240 8 M 20 22 6,72
168,3 - 170,5 6,57
200 219,1 - 221,8 340 24 7 295 8 M 20 22 9,31
250 - 267 270,2 395 26 7 350 12 M 20 22 12,5
273 - 276,2 11,9
300 323,9 - 327,6 445 26 7 400 12 M 20 22 13,8
350 355,6 - 359,7 505 28 7 460 16 M 20 22 20,6
- 368 372,2 19
400 406,4 - 411 565 32 7 515 16 M 24 26 27,9
- 419 423,7 25,9
450 457 - 462,5 615 38 7 565 20 M 24 26 35,6
500 508 - 513,6 670 38 7 620 20 M 24 26 41,1

Check En 1092-1 Slip On Flanges Pressure Rating Chart And Awwa C207 Class D SORF Flange Thickness Calculation.

DIN 2502 PN16 Slip On Flange Dimensions

DIN 2502 PN16 Slip On Flange Dimensions

DN NPS d1 K D b d2 Thread Holes Weight In Kg
10 17.2 17.7 90 60 14 14 M12 4 0.216
15 21.3 22.0 65 95 14 14 M12 4 0.669
20 26.9 27.6 75 105 16 14 M12 4 0.935
25 33.7 34.4 85 115 16 14 M12 4 1.110
32 42.4 43.1 100 140 16 18 M16 4 1.622
40 48.3 49.0 110 150 16 18 M16 4 1.854
50 60.3 61.1 125 165 18 18 M16 4 2.462
65 76.1 77.1 145 185 18 18 M16 4 2.993
80 88.9 90.3 160 200 20 18 M16 8 3.605
100 114.3 115.9 180 220 20 18 M16 8 3.990
125 139.7 141.6 210 250 22 18 M16 8 5.403
150 168.3 170.5 240 285 22 22 M20 8 6.546
175 193.7 196.1 315 270 24 22 M20 8 4.522
200 219.1 221.8 295 340 24 22 M20 12 8.962
250 273 276.2 355 405 26 26 M24 12 12.758
300 323.9 327.6 410 460 28 26 M24 12 16.593
350 355.6 359.7 470 520 30 26 M24 16 24.070
400 406.4 411.0 525 580 32 30 M27 16 30.186
450 457 462.3 585 640 38 30 M27 20 41.653
500 508 513.6 650 715 38 33 M30 20 52.842

DIN 2503 PN25 Slip On Flange Dimensions

DIN 2503 PN25 Slip On Flange Dimensions

NPS Pipe Diameter Inside Daimeter Flange Number of holes Flange Daimeter Thk of Flange Daimeter of Bolt Circle Daimeter of Bolt Holes Approx.Weight
DN ISO DIN D5 BN D b K d2 KG/PCS
10 - 14 14.5 4 90 16 60 14 0.7
17.2 - 17.7 4 90 16 60 14 0.69
15 - 20 21 4 95 16 65 14 0.77
21.3 - 22 4 95 16 65 14 0.77
20 - 25 26 4 105 18 75 14 1.06
26.9 - 27.6 4 105 18 75 14 1.05
25 - 30 31 4 115 18 85 14 1.27
33.7 - 34.4 4 115 18 85 14 1.25
32 - 38 39 4 140 18 100 18 1.86
42.4 - 43.1 4 140 18 100 18 1.83
40 - 44.5 45.5 4 150 18 110 18 2.12
48.3 - 49 4 150 18 110 18 2.09
50 - 57 58.1 4 165 20 125 18 2.78
60.3 - 61.1 4 165 20 125 18 2.74
65 76.1 - 77.1 8 185 22 145 18 3.48
80 88.9 - 90.3 8 200 24 160 18 4.33
100 - 108 109.6 8 235 24 190 22 5.82
114.3 - 115.9 8 235 24 190 22 5.61
125 - 133 134.8 8 270 26 220 26 7.91
139.7 - 141.6 8 270 26 220 26 7.6
150 - 159 161.1 8 300 28 250 26 10.12
168.3 - 170.5 8 300 28 250 26 9.58
175 193.7 - 196.1 12 330 28 280 26 10.76
200 219.1 - 221.8 12 360 30 310 26 13.37
250 - 267 270.2 12 425 32 370 30 19.1
273 - 276.2 12 425 32 370 30 18.45
300 323.9 - 327.6 16 485 34 430 30 23.79
350 355.6 - 359.7 16 555 38 490 33 37.77
- 368 372.2 16 555 38 490 33 35.63
400 406.4 - 411 16 620 40 550 36 48.03
- 419 423.7 16 620 40 550 36 45.41
500 508 - 513.6 20 730 44 660 36 65.97
600 610 - 616.5 20 845 50 770 39 93.57
700 711 - 716 24 960 52 875 42 117.53
800 813 - 818 24 1085 56 990 48 156.34
900 914 - 920 28 1185 62 1090 48 188.57
1000 1016 - 1022 28 1320 68 1210 56 255.79

DIN 2543 PN16 Slip On Flange Dimensions

DIN 2543 PN16 Slip On Flange Dimensions

Bore Common Dimension Raised Face Drilling Approx.
Weight (Kg)
Nominal Bore d1 D t K d4 f Number of Bolts x d2 DIN 2543
10

15

20

 14
17.2*)
20
21.3*)
25
26.9*)		 90

95

105

 　

14

16

 60

65

75

 40

45

58

 2

2

2

 4

4

4

 M12

M12

M12

 (1/2")

(1/2")

(1/2")

 14

14

14

 0.63

0.72

1.01
25

32

40

30
33.7*)
38
42.4*)
44.5
48.3*)

 115

140

150

 16

16

16

 85

100

110

 68

78

88

 2

2

3

 4

4

4

 M12

M16

M16

 (1/2")

(5/8")

(5/8")

 14

18

18

 1.23

1.80

2.09
50

65

80

57

60.3*)
76.1*)

88.9*)

 165

185

200

 18

18

20

 125

145

160

 102

122

138

 3

3

3

 4

4

8

 M16

M16

M16

 (5/8")

(5/8")

(5/8")

 18

18

18

 2.88

3.66

4.77
100

125

150

108
114.3*)
133
139.7*)
159
168.3

 220

250

285

 20

22

22

 180

210

240

 158

188

212

 3

3

3

 8

8

8

 M16

M16

M20

 (5/8")

(5/8")

(3/4")

 18

18

23

 5.65

8.42

10.4
200

250

300

216
219.1*)
267
273*)
318
323.9*)

 340

405

460

 24

26

28

 295

355

410

 268

320

378

 3

3

4

 12

12

12

 M20

M24

M24

 (3/4")

(7/8")

(7/8")

 23

27

27

 16.1

24.9

35.1
350

400

500

355.6*)
368
406.4*)
419
508*)
521

 520

580

715

 30

32

36

 470

525

650

 438

490

610

 4

4

4

 16

16

20

 M24

M27

M30

 (7/8")

(1")

(1-1/8")

 27

30

33

 47.8

63.5

102.0

Different Types Of ASME B16.5 Slip On Flanges

2 1/2 Inch, 150 LB, ASME B16.5 Slip On Flange

2 1/2 Inch, 150 LB, ASME B16.5 Slip On Flanges

A182 F316, SCH 40, Stainless Steel Slip On Flange

A182 F316, SCH 40, Stainless Steel Slip On Flange

ANSI B16.5 Carbon Steel Slip On Flange

ANSI B16.5 Carbon Steel Slip On Flanges

ASTM A182 F316, Mild Steel Slip On Flange

ASTM A182 F316, Mild Steel Slip On Flanges


2 Inch, SCH 40, En 1092-1 Slip On Flange

2 Inch, SCH 40, En 1092-1 Slip On Flanges

Raised Face Ends, Threaded Slip On Flange 150 Lbs

Raised Face Ends, Threaded Slip On Flange 150 Lbs

Class Rating 300 LB, Alloy Steel Slip On Flanges

Class Rating 300 LB, Alloy Steel Slip On Flanges

1 Inch, SCH 40, En 1092-1 ASTM A105 SORF Flange

1 Inch, SCH 40, En 1092-1 ASTM A105 SORF Flanges


4 Inch, SCH 40, RF, F304L, Bs10 Table E Slip On Flange

4 Inch, SCH 40, RF, F304L, Bs10 Table E Slip On Flanges

ASTM A182 F304L, Raised Face Slip On Flange

ASTM A182 F304L, Raised Face Slip On Flanges

AWWA c207 Class D Rotating Slip On Flange

AWWA c207 Class D Rotating Slip On Flanges

MSS SP-44 Slip On Welding Neck Flange

MSS SP-44 Slip On Welding Neck Flanges


Some Of The Major Locations We Have Supplied Stainless Steel Slip On Flange (SORF):

2 Inch, ANSI/AMSE B16.5, SCH 40, Slip On Raised Face Flange United Kingdom -UK, Malaysia, Europe, UAE
10 Inch, SCH 40, Class 150, Reducing Slip On Flange Dammam -KSA, Belgium, Philippines, Indonesia.
DN450, SCH 160, Slip On Flat Face Flange Qatar, Thailand, Europe, France.
1/2 to 56 Inch, ASME B16.5, Sch 120 Slip On Plate Flange Malaysia, Thailand, Germany, Czechia
SCH 100, 12 Inch, Slip On Welding Neck Flange Finland, Bangladesh, Malaysia, USA
2 Inch X 1 Inch Size, SCH 80/ 160, Sorf Plate Flanges Saudi Arabia (KSA), Kuwait, South Africa, Brazil
SCH 10S, 5 Inch, Buttweld ANSI B16.5, Slip On Table E Flange South Africa, Bahrain, Singapore, Singapore
4 Inch, SCH 10S, MSS SP-44, Stainless Steel Slip On Flange Philippines, UK, Australia, Nigeria
8 inch, WT 3.05 mm, ASTM A182, Carbon Steel Slip On Flange Oman, UAE, Hong Kong, Malaysia
12 Inch, SCH 10S, ASME B16.5, Forged Steel Slip On Flanges Chile, Singapore, Iran, Italy
10 inch, DN200, SCH 40S, Mild Steel Slip On Flange United Arab Emirates (UAE), Norway, Turkey, Malaysia
ASME B16.5, DN80, SCH 10S, Threaded Slip On Flange Netherlands, Russia, Malaysia, Dubai
1/2 Inch to 56 inch, SCH5 to SCH160, Pn16 Slip On Flange Egypt, UK, Mexico, Spain
14 Inch, WT 0.375 In, ASTM A182, Class 150 Slip On Flange UK, Ellington -United States, Poland, Canada
6 inch, SCH 10S, ASME B16.5, Alloy Steel Slip On Flanges Canada, Malaysia, Philippines, Singapore
1/2 Inch, SCH 80S, RF, Bs4504 Pn16 Slip On Flange Japan, Romania, Europe, Malaysia
6 × 3 Inch, SCH 120, ASME B16.5 Slip On Flange Sweden, China, Malaysia, Colombia

Have A Query? Drop Us An Email

Call Now : +91 9869506920


About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy