Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

ASME B16.5 RTJ Flange Dimensions - Class 150 To 2500

Check Specification Chart Of Ring Type Joint Flanges And ANSI B16.5 RTJ Flange Torque Chart.

 Ring Type Joint Flange

Ring Type Joint Flange

RTJ Flanges

RTJ Flanges

 Carbon Steel Ring Type Joint Flange

Carbon Steel Ring Type Joint Flange


What Is A Ring Type Joint Flange?


There are different faces for a flange. These faces have the preliminary use as contact surfaces. Usually, the sealing gasket sits on this face and thus seals the connection. The Flat Faced Ring Type Joint Flanges have a flat face that is not raised. The rtj flange dimensions vary according to standards and needs. We have a detailed rtj flange weight chart for our clients to make the selection easy.  The standards for RTJ Flanges make them fit under 24 inches. Ring Type Joint Weld Flange has a groove in the ring so that the gasket often squeezes into the groove. Ring Type Joint Raised Face Flanges have a raised face for extra grip and easy handling as well as strength. ANSI B16.5 Class 150 Ring Type Joint Flanges are one of the low pressure class flanges. Stainless Steel Ring Type Joint Flanges can also come in other dimensions.

what is rtj gasket

What Is Rtj Gasket?

Ring Type Joint Flanges excerpt more pressure on the gasket for extra tightness. RTJ Flanges can therefore increase the pressure containment capacity at the connection. ASME B16.47 Series A and B RTJ Flanges have different number of bolt holes and can range from 26 inches to 60 inches in diameter. Ring Type Joint Forged Flanges are made to perform better than the cast flanges. Ring Type Joint Flange is made up of A182 material which is a stronger alloy.


How Does A RTJ Flange Work?

RTJ Flange can differ according to the material and the standards. Alloy Steel Ring Type Joint Plate Flanges have a plate or ring attached to the joint. Nickel Alloy 200 RTJ Flange is lighter than the Carbon Steel Ring Type Joint Flange. MSS SP-44 Ring Type Joint Flanges and Duplex Steel RTJ Flanges can perform better than other materials because they are stronger. Hastelloy C22 Ring Type Joint Flange and the Inconel Ring Type Joint Flanges are lighter and can be applied to specific applications.


Ring Type Joint Flange Dimensions


Ring Type Joint Flange Dimensions

Class 150 Ring Type Joint Flanges

Size in Inches Size in Millimeter Outer Diameter (O.D.) Thickness Of Flanges Hub Outside Daimeter Weld Neck Outside Daimeter Length Of Welding Neck RTJ RF Diameter Height Of RTJ RF PCD RTJ Pitch Diameter RTJ Depth RTJ Width Bore
A B C D E F G H I J K L
1/2 15 90 9.6 30 21.3 46 N/A N/A 60.3 N/A N/A N/A
3/4 20 100 11.2 38 26.7 51 N/A N/A 69.9 N/A N/A N/A
1 25 110 12.7 49 33.4 54 63.5 6.35 79.4 47.63 6.35 8.74
1 1/4 32 115 14.3 59 42.2 56 73 6.35 88.9 57.15 6.35 8.74
1 1/2 40 125 15.9 65 48.3 60 82.5 6.35 98.4 65.07 6.35 8.74
2 50 150 17.5 78 60.3 62 102 6.35 120.7 82.55 6.35 8.74
2 1/2 65 180 20.7 90 73 68 121 6.35 139.7 101.6 6.35 8.74
3 80 190 22.3 108 88.9 68 133 6.35 152.4 114.3 6.35 8.74
3 1/2 90 215 22.3 122 101.6 70 154 6.35 177.8 131.78 6.35 8.74
4 100 230 22.3 135 114.3 75 171 6.35 190.5 149.23 6.35 8.74
5 125 255 22.3 164 141.3 87 194 6.35 215.9 171.45 6.35 8.74
6 150 280 23.9 192 168.3 87 219 6.35 241.3 193.68 6.35 8.74
8 200 345 27 246 219.1 100 273 6.35 298.5 247.65 6.35 8.74
10 250 405 28.6 305 273 100 330 6.35 362 304.8 6.35 8.74
12 300 485 30.2 365 323.8 113 406 6.35 431.8 381 6.35 8.74
14 350 535 33.4 400 355.6 125 425 6.35 476.3 396.88 6.35 8.74
16 400 595 35 457 406.4 125 483 6.35 539.8 454.03 6.35 8.74
18 450 635 38.1 505 457.2 138 546 6.35 577.9 517.53 6.35 8.74
20 500 700 41.3 559 508 143 597 6.35 635 558.8 6.35 8.74
24 600 815 46.1 663 610 151 711 6.35 749.3 673.1 6.35 8.74

Class 300 Ring Type Joint Flanges

Size in Inches Size in Millimeter Outer Diameter (O.D.) Thickness Of Flanges Hub Outside Daimeter Weld Neck Outside Daimeter Length Of Welding Neck RTJ RF Diameter Height Of RTJ RF PCD RTJ Pitch Diameter RTJ Depth RTJ Width Bore
A B C D E F G H I J K L
1/2 15 95 12.7 38 21.3 51 51 5.54 66.7 34.14 5.54 7.14
3/4 20 115 14.3 48 26.7 56 63.5 6.35 82.6 42.88 6.35 8.74
1 25 125 15.9 54 33.4 60 70 6.35 88.9 50.8 6.35 8.74
1 1/4 32 135 17.5 64 42.2 64 79.5 6.35 98.4 60.33 6.35 8.74
1 1/2 40 155 19.1 70 48.3 67 90.5 6.35 114.3 68.27 6.35 8.74
2 50 165 20.7 84 60.3 68 108 7.92 127 82.55 7.92 11.91
2 1/2 65 190 23.9 100 73 75 127 7.92 149.2 101.6 7.92 11.91
3 80 210 27 117 88.9 78 146 7.92 168.3 123.83 7.92 11.91
3 1/2 90 230 28.6 133 101.6 79 159 7.92 184.2 131.78 7.92 11.91
4 100 255 30.2 146 114.3 84 175 7.92 200 149.23 7.92 11.91
5 125 280 33.4 178 141.3 97 210 7.92 235 180.98 7.92 11.91
6 150 320 35 206 168.3 97 241 7.92 269.9 211.12 7.92 11.91
8 200 380 39.7 260 219.1 110 302 7.92 330.2 269.88 7.92 11.91
10 250 445 46.1 321 273 116 356 7.92 387.4 323.85 7.92 11.91
12 300 520 49.3 375 323.8 129 413 7.92 450.8 381 7.92 11.91
14 350 585 52.4 425 355.6 141 457 7.92 514.4 419.1 7.92 11.91
16 400 650 55.6 483 406.4 144 508 7.92 571.5 469.9 7.92 11.91
18 450 710 58.8 533 457 157 575 7.92 628.6 533.4 7.92 11.91
20 500 775 62 587 508 160 635 9.53 685.8 584.2 9.53 13.49
24 600 915 68.3 702 610 167 749 11.13 812.8 692.15 11.13 16.66

Class 400 Ring Type Joint Flanges

Size in Inches Size in Millimeter Outer Diameter (O.D.) Thickness Of Flanges Hub Outside Daimeter Weld Neck Outside Daimeter Length Of Welding Neck RTJ RF Diameter Height Of RTJ RF PCD RTJ Pitch Diameter RTJ Depth RTJ Width Bore
A B C D E F G H I J K L
1/2 15 95 14.3 38 21.3 52 51 5.54 66.7 34.14 5.54 7.14
3/4 20 115 15.9 48 26.7 57 63.5 6.35 82.6 42.88 6.35 8.74
1 25 125 17.5 54 33.4 62 70 6.35 88.9 50.8 6.35 8.74
1 1/4 32 135 20.7 64 42.2 67 79.5 6.35 98.4 60.33 6.35 8.74
1 1/2 40 155 22.3 70 48.3 70 90.5 6.35 114.3 68.27 6.35 8.74
2 50 165 25.4 84 60.3 73 108 7.92 127 82.55 7.92 11.9
2 1/2 65 190 28.6 100 73 79 127 7.92 149.2 101.6 7.92 11.9
3 80 210 31.8 117 88.9 83 146 7.92 168.3 123.83 7.92 11.9
3 1/2 90 230 35 133 101.6 86 159 7.92 184.2 131.78 7.92 11.9
4 100 255 35 146 114.3 89 175 7.92 200 149.23 7.92 11.91
5 125 280 38.1 178 141.3 102 210 7.92 235 180.98 7.92 11.91
6 150 320 41.3 206 168.3 103 241 7.92 269.9 211.12 7.92 11.91
8 200 380 47.7 260 219.1 117 302 7.92 330 269.88 7.92 11.91
10 250 445 54 321 273 124 356 7.92 387.4 323.85 7.92 11.91
12 300 520 57.2 375 323.8 137 413 7.92 450.8 381 7.92 11.91
14 350 585 60.4 425 355.6 149 457 7.92 514.4 419.1 7.92 11.91
16 400 650 63.5 483 406.4 152 508 7.92 571.5 469.9 7.92 11.91
18 450 710 66.7 533 457 165 575 7.92 628.6 533.4 7.92 11.91
20 500 775 69.9 587 508 168 635 9.53 685.8 584.2 9.53 13.49
24 600 915 76.2 702 610 175 749 11.13 812.8 692.15 11.13 16.66

Class 600 Ring Type Joint Flanges

Size in Inches Size in Millimeter Outer Diameter (O.D.) Thickness Of Flanges Hub Outside Daimeter Weld Neck Outside Daimeter Length Of Welding Neck RTJ RF Diameter Height Of RTJ RF PCD RTJ Pitch Diameter RTJ Depth RTJ Width Bore
A B C D E F G H I J K L
1/2 15 95 14.3 38 21.3 52 51 5.54 66.7 34.14 5.54 7.14
3/4 20 115 15.9 48 26.7 57 63.5 6.35 82.6 42.88 6.35 8.74
1 25 125 17.5 54 33.4 62 70 6.35 88.9 50.8 6.35 8.74
1 1/4 32 135 20.7 64 42.2 67 79.5 6.35 98.4 60.33 6.35 8.74
1 1/2 40 155 22.3 70 48.3 70 90.5 6.35 114.3 68.27 6.35 8.74
2 50 165 25.4 84 60.3 73 108 7.92 127 82.55 7.92 11.91
2 1/2 65 190 28.6 100 73 79 127 7.92 149.2 101.6 7.92 11.91
3 80 210 31.8 117 88.9 83 146 7.92 168.3 123.83 7.92 11.91
3 1/2 90 230 35 133 101.6 86 159 7.92 184.2 131.78 7.92 11.91
4 100 275 38.1 152 114.3 102 175 7.92 215.9 149.23 7.92 11.91
5 125 330 44.5 189 141.3 114 210 7.92 266.7 180.98 7.92 11.91
6 150 355 47.7 222 168.3 117 241 7.92 292.1 211.12 7.92 11.91
8 200 420 55.6 273 219.1 133 302 7.92 349.2 269.88 7.92 11.91
10 250 510 63.5 343 273 152 356 7.92 431.8 323.85 7.92 11.91
12 300 560 66.7 400 323.8 156 413 7.92 489 381 7.92 11.91
14 350 605 69.9 432 355.6 165 457 7.92 527 419.1 7.92 11.91
16 400 685 76.2 495 406.4 178 508 7.92 603.2 469.9 7.92 11.91
18 450 745 82.6 546 457 184 575 7.92 654 533.4 7.92 11.91
20 500 815 88.9 610 508 190 635 9.53 723.9 584.2 9.53 13.49
24 600 940 101.6 718 610 203 749 11.13 838.2 692.15 11.13 16.66

Class 900 Ring Type Joint Flanges

Size in Inches Size in Millimeter Outer Diameter (O.D.) Thickness Of Flanges Hub Outside Daimeter Weld Neck Outside Daimeter Length Of Welding Neck RTJ RF Diameter Height Of RTJ RF PCD RTJ Pitch Diameter RTJ Depth RTJ Width Bore
A B C D E F G H I J K L
1/2 15 120 22.3 38 21.3 60 60.5 6.35 82.6 39.67 6.35 8.74
3/4 20 130 25.4 44 26.7 70 66.5 6.35 88.9 44.45 6.35 8.74
1 25 150 28.6 52 33.4 73 71.5 6.35 101.6 50.8 6.35 8.74
1 1/4 32 160 28.6 64 42.2 73 81 6.35 111.1 60.33 6.35 8.74
1 1/2 40 180 31.8 70 48.3 83 92 6.35 123.8 68.27 6.35 8.74
2 50 215 38.1 105 60.3 102 124 7.92 165.1 95.25 7.92 11.91
2 1/2 65 245 41.3 124 73 105 137 7.92 190.5 107.95 7.92 11.91
3 80 240 38.1 127 88.9 102 156 7.92 190.5 123.83 7.92 11.91
4 100 290 44.5 159 114.3 114 181 7.92 235 149.23 7.92 11.91
5 125 350 50.8 190 141.3 127 216 7.92 279.4 180.98 7.92 11.91
6 150 380 55.6 235 168.3 140 241 7.92 317.5 211.12 7.92 11.91
8 200 470 63.5 298 219.1 162 308 7.92 393.7 269.88 7.92 11.91
10 250 545 69.9 368 273 184 362 7.92 469.9 323.85 7.92 11.91
12 300 610 79.4 419 323.8 200 419 7.92 533.4 381 7.92 11.91
14 350 640 85.8 451 355.6 213 467 11.13 558.8 419.1 11.13 16.66
16 400 705 88.9 508 406.4 216 524 11.13 616 469.9 11.13 16.66
18 450 785 101.6 565 457 229 594 12.7 685.8 533.4 12.7 19.84
20 500 855 108 622 508 248 648 12.7 749.3 584.2 12.7 19.84
24 600 1040 139.7 749 610 292 772 15.88 901.7 692.15 15.88 26.97

Class 1500 Ring Type Joint Flanges

Size in Inches Size in Millimeter Outer Diameter (O.D.) Thickness Of Flanges Hub Outside Daimeter Weld Neck Outside Daimeter Length Of Welding Neck RTJ RF Diameter Height Of RTJ RF PCD RTJ Pitch Diameter RTJ Depth RTJ Width Bore
A B C D E F G H I J K L
1/2 15 120 22.3 38 21.3 60 60.5 6.35 82.6 39.67 6.35 8.74
3/4 20 130 25.4 44 26.7 70 66.5 6.35 88.9 44.45 6.35 8.74
1 25 150 28.6 52 33.4 73 71.5 6.35 101.6 50.8 6.35 8.74
1 1/4 32 160 28.6 64 42.2 73 81 6.35 111.1 60.33 6.35 8.74
1 1/2 40 180 31.8 70 48.3 83 92 6.35 123.8 68.27 6.35 8.74
2 50 215 38.1 105 60.3 102 124 7.92 165.1 95.25 7.92 11.91
2 1/2 65 245 41.3 124 73 105 137 7.92 190.5 107.95 7.92 11.91
3 80 265 47.7 133 88.9 117 168 7.92 203.2 136.53 7.92 11.91
4 100 310 54 162 114.3 124 194 7.92 241.3 161.93 7.92 11.91
5 125 375 73.1 197 141.3 156 229 7.92 292.1 193.68 7.92 11.91
6 150 395 82.6 229 168.3 171 248 9.53 317.5 211.14 9.53 13.49
8 200 485 92.1 292 219.1 213 318 11.13 393.7 269.88 11.13 16.66
10 250 585 108 368 273 254 371 11.13 482.6 323.85 11.13 16.66
12 300 675 123.9 451 323.8 283 438 14.27 571.5 381 14.27 23.01
14 350 750 133.4 495 355.6 298 489 15.88 635 419.1 15.88 26.97
16 400 825 146.1 552 406.4 311 546 17.48 704.8 469.9 17.48 30.18
18 450 915 162 597 457 327 613 17.48 774.7 533.4 17.48 30.18
20 500 985 177.8 641 508 356 673 17.48 831.8 584.2 17.48 33.32
24 600 1170 203.2 762 610 406 794 20.62 990.6 692.15 20.62 36.53

Class 2500 Ring Type Joint Flanges

Size in Inches Size in Millimeter Outer Diameter (O.D.) Thickness Of Flanges Hub Outside Daimeter Weld Neck Outside Daimeter Length Of Welding Neck RTJ RF Diameter Height Of RTJ RF PCD RTJ Pitch Diameter RTJ Depth RTJ Width Bore
A B C D E F G H I J K L
1/2 15 135 30.2 43 21.3 73 65 6.35 88.9 42.88 6.35 8.74
3/4 20 140 31.8 51 26.7 79 73 6.35 95.2 50.8 6.35 8.74
1 25 160 35 57 33.4 89 82.5 6.35 108 60.33 6.35 8.74
1 1/4 32 185 38.1 73 42.2 95 102 7.92 130.2 72.23 7.92 11.91
1 1/2 40 205 44.5 79 48.3 111 114 7.92 146 82.55 7.92 11.91
2 50 235 50.9 95 60.3 127 133 7.92 171.4 101.6 7.92 11.91
2 1/2 65 265 57.2 114 73 143 149 9.53 196.8 111.13 9.52 13.49
3 80 305 66.7 133 88.9 168 168 9.53 228.6 127 9.52 13.49
4 100 355 76.2 165 114.3 190 203 11.13 273 157.18 11.13 16.66
5 125 420 92.1 203 141.3 229 241 12.7 323.8 190.5 12.7 19.84
6 150 485 108 235 168.3 273 279 12.7 368.3 228.6 12.7 19.84
8 200 550 127 305 219.1 318 340 14.27 438.2 279.4 14.27 23.01
10 250 675 165.1 375 273 419 425 17.48 539.8 342.9 17.48 30.18
12 300 760 184.2 441 323.8 464 495 17.48 619.1 406.4 17.48 33.32

Refer Blind Rtj Flange Weight Chart According to ASME B16.5, ISO Certified Ring Type Joint (Rtj) Flange Manufacturer In India.


Standard Specification Of RTJ Flange

Material Specification Of : ASME B16.5 RTJ Flange
Marking Standard Name of Manufacturer
Schedule
Type of Flange Facing
Nominal Pipe Size
Pressure Class
ASME B16 Designation
Bolt Type high strength bolts
medium strength bolts
low strength bolts
European Standard Flanges JIS B2220 Flanges (5k to 30k) and KS1503 flanges
Russian-Standard Flanges GOST 12820 / 12821-80, DIN, UNI, EN 1092-1
South African Standard Flanges SANSflanges And SABS flanges
Surface Finish smooth, concentric serrated, stock
Standard Cover : pressure ratings & temperature ratings, materials, marking, dimensions, weight, tolerances, testing
Contact Faces RTJ (Ring Type Joint), FF (Flat Face), RF (Raised Face), T/G (Tongue And Groove ), M/F (Male And Female)
Size Chart Normal Pipe Size 1/2 to NPS 24"
Materials Stainless Steel (Grade 304/L, 316/L), Carbon Steel (ASTM A105 And ASTM A350), Alloy Steel (ASTM A182), Mild Steel, Duplex Steel, Pressure Vessel Steel, Titanium, Super Duplex Steel, Nickel Alloy, Monel, Inconel, Hastelloy, Copper Nickel, Cast Iron, Wrought Iron.
Thickness Normal Pipe Size ≤ 18
Bore Diameter Normal Pipe ≤ 10
Flanges Standards EN 1092-1, JIS, ASME B16.5, ASME B16.47 type A, UNI, DIN
Pressure Rating Class 150 To Class 2500
High Temperature Above 200°C (400°F) For Class 150 Or Above 400°C (750°F)
Low Temperature Above -29 Degree C (−20°F)
Common Types Of Flanges: Slip On (SORF), Weld Neck (WNRF), Blind (BLRF), Lap Joint (Loose), Threaded (NPT), Socket-Weld (SWRF)
Special Types Of Flanges : Nipoflange, Elboflange, Latroflange, Swivel Flange, Expanding Flange, Reducing Flange, Weldoflange
Gaskets Types Full Face Gasket
Flat Ring Gasket
Metallic Ring Gakset
Advantages Of Pipe Flange Used to Connect Pipe System
Easy Repair Pipe System
Assembled Without Welding

Ring Type Joint Flange Torque Chart

Torque FT-LBS - ASTM 193 Grade B7 and ASTM 193 Gr B16 Stud Bolt
Bolt
Daimeter
Torque FT-LBS
30% Initial
Torque Table
70%
Torque Table
100% Final
Torque Table
1/2 17 39 55
9/16 24 55 80
5/8 33 77 110
3/4 59 137 195
7/8 93 217 310
1 140 325 465
1.1/8 205 480 685
288 672 960
1.3/8 391 915 1305
518 1208 1725
1.9/16 588 1372 1960
1.5/8 668 1558 2225
840 1960 2800
1.7/8 1044 2436 3480
2 1280 2985 4265
1850 4315 6165
2565 5985 8550
3121 7282 10400
3 4080 9520 13600
Ring Type Joint (Rtj) Flange Price List
Type Of Flanges Size Material Class Price In India (INR)
RTJ Flanges 2" ASTM A105 Class 150 856.00
RTJ 4" ASTM A105 Class 150 1685.00
RTJ 6" ASTM A105 Class 300 2150.56
RTJ 8" ASTM A105 Class 300 2878.00
RTJ 10" ASTM A105 Class 300 3600.00

Please note this is an approx Price of RTJ Flanges in Mumbai, India. For final Carbon Steel Ring Type Joint Flange Price List Please Call on 91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com



Stainless Steel RTJ Flanges Bolt Chart, Application Of Ring-type Joint Gaskets In A Refinery, Rtj Orifice Flange Pressure Rating Class.


Ring Type Joint Flange Pressure Ratings

ASME B16.5 RTJ Flange Pressure Pressure
Temperature (°C)
Class
Class 150Class 300Class 400Class 600Class 900Class 1500Class 2500
-29 - 38 19.8 51.7 68.9 103.4 155 259 431
50 19.5 51.7 68.9 103.4 155 259 431
100 17.7 51.5 68.7 103.0 155 258 429
150 15.8 50.2 66.8 100.3 151 251 418
200 13.8 48.6 64.8 97.2 146 243 405
250 12.1 46.3 61.7 92.7 139 232 386
300 10.2 42.9 57.0 85.7 129 214 357
325 9.3 41.4 55.0 82.6 124 207 344
350 8.4 40.0 53.4 80.0 120 200 334
375 7.4 37.8 50.4 75.7 114 189 315
400 6.5 34.7 46.3 69.4 104 174 290
425 5.5 28.8 38.4 57.5 86.3 144 240
450 4.6 23.0 30.7 46.0 69.0 115 192
475 3.7 17.1 22.8 34.2 51.3 85.4 142
500 2.8 11.6 15.4 23.2 34.7 57.9 96.5
538 1.4 5.9 7.9 11.8 17.7 29.5 49.2

RTJ Flange Stud Bolt Chart

Ring Type Joint Root Radius Ring no Flanges Between Number of Bolts Bolt Size Of UNC Length Of Machine Bolt Length Of RTJ Stud Size Of Hole ISO Stud Size
0.8 N/A N/A 4 1/2 50 N/A 5/8 M14
0.8 N/A N/A 4 1/2 50 N/A 5/8 M14
0.8 15 4 4 1/2 55 75 5/8 M14
0.8 17 4 4 1/2 55 85 5/8 M14
0.8 19 4 4 1/2 65 85 5/8 M14
0.8 22 4 4 5/8 70 95 3/4 M16
0.8 25 4 4 5/8 75 100 3/4 M16
0.8 29 4 4 5/8 75 100 3/4 M16
0.8 33 4 8 5/8 75 100 3/4 M16
0.8 36 4 8 5/8 75 100 3/4 M16
0.8 40 4 8 3/4 85 110 7/8 M20
0.8 43 4 8 3/4 85 115 7/8 M20
0.8 48 4 8 3/4 90 120 7/8 M20
0.8 52 4 12 7/8 100 125 1 M24
0.8 56 4 12 7/8 100 135 1 M24
0.8 59 3 12 1 115 145 1 1/8 M27
0.8 64 3 16 1 115 145 1 1/8 M27
0.8 68 3 16 1 1/8 125 160 1 1/4 M30
0.8 72 3 20 1 1/8 140 170 1 1/4 M30
0.8 76 3 20 1 1/4 150 185 1 3/8 M33

Carbon Steel Ring Type Joint Flanges Thickness Calculation For Pressure Vessel And Check Update Price Before You Buy RTJ WN Flange In India.

RTJ Flange Weight Chart

DN In inchesDimensionASME B16.5 RTJ Flange Weight With Sizes 1/2 inches to 2 1/2 inches
125 LBS
150 LBS
300 LBS400 LBS600 LBS900 LBS1500 LBS2500 LBS
inchesmillimeterinchesmillimeterinchesmillimeterinchesmillimeterinchesmillimeterinchesmillimeterinchesmillimeter
1/2A3 1/288.93 3/495.23 3/495.23 3/495.24 3/41214 3/41215 1/4133.4
b7/1611.19/1614.39/1614.39/1614.37/822.27/822.21 3/1630.2
D21 3/834.91 3/834.91 3/834.91 3/834.91 3/834.91 3/834.91 3/834.9
D12 3/860.32 5/866.72 5/866.72 5/866.73 1/482.63 1/482.63 1/288.9
n44444444444-444
d5/815.95/815.95/815.95/815.97/822.27/822.27/822.2
3/4A3 7/898.44 5/8117.54 5/8117.54 5/8117.55 1/81305 1/81305 1/2139.7
b1/212.75/815.95/815.95/815.9125.4125.41 1/431.8
D21 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.9
D12 3/469.83 1/482.53 1/482.53 1/482.53 1/288.93 1/288.93 3/495.2
n44444444444-444
d5/815.93/4193/4193/4197/822.27/822.27/822.2
1A4 1/41084 7/8123.84 7/8123.84 7/8123.85 7/8149.25 7/8149.26 1/4159
b9/1614.311/1617.511/1617.511/1617.51 1/828.61 1/828.61 3/834.9
D2250.8250.8250.8250.8250.8250.8250.8
D13 1/879.43 1/288.93 1/288.93 1/288.9410241024 1/4108
n44444444444444
d5/815.93/4193/4193/419125.4125.4125.4
1 1/4A4 5/8117.55 1/4133.45 1/4133.45 1/4133.46 1/41596 1/41597 1/4184.2
b5/815.93/41913/1620.613/1620.61 1/828.61 1/828.61 1/238.1
D22 1/263.52 1/263.52 1/263.52 1/263.52 1/263.52 1/263.52 1/263.5
D13 1/288.93 7/898.43 7/898.43 7/898.44 3/81114 3/81115 1/8130
n44444444444444
d5/815.93/4193/4193/419125.4125.41 1/828.6
1 1/2A51276 1/8155.66 1/8155.66 1/8155.67177.87177.88203
b11/1617.513/1620.67/822.27/822.21 1/431.81 1/431.81 3/444.5
D22 7/873 982 7/8732 7/8732 7/8732 7/8732 7/8732 7/873
D13 7/844 1/21144 1/21144 1/21144 7/81244 7/81245 3/4146
n44444444444444
d5/8. 15.97/822.27/822.27/822.21 1/828.61 1/828.61 1/431.8
2A6152.46 1/2165.16 1/2165.16 1/2165.18 1/2215.98 1/2215.99 1/4234.9
b3/4197/822.2125.4125.41 1/238.11 1/238.1250.8
D23 5/892.13 5/892.13 5/892.13 5/892.13 5/892.13 5/892.13 5/892.1
D14 3/41215127512751276 1/2165.16 1/2165.16 3/4171
n44888888888888
d3/4193/4193/4193/419125.4125.41 1/828.6
2 1/2A7177.87 1/2190.57 1/2190.57 1/2190.59 5/82449 5/824410 1/2266.7
b7/822.2125.41 1/828.61 1/828.61 5/841.31 5/841.32 1/457.2
D24 1/8104.84 1/8104.84 1/8104.84 1/8104.84 1/81054 1/81054 1/8105
D15 1/2139.75 7/8149.25 7/8149.25 7/8149.27 1/2190.57 1/2190.57 3/4197
n44888888888888
d3/4197/822.27/822.27/822.21 1/828.61 1/828.61 1/431.8

RTJ Flange Gasket Chart

RTJ Flange Gasket Chart

R
Number
Diameter
P
Width Of
A
Height Of Oct
C
Oct
R1
Normal Pipe Sizes
CL
Oval
B
Oct
H
R 11 34.14 6.35 11.2 9.7 4.32 1.5 1/2
300 600
R 12 39.7 7.95 14.2 12.7 5.23 1.5 1/2
900 1500
R 13 42.88 7.95 14.2 12.7 5.23 1.5 3/4
300 600
1/2
2500
R 14 44.45 7.95 14.2 12.7 5.23 1.5 3/4
900 1500
R 15 47.63 7.95 14.2 12.7 5.23 1.5 1
150
R 16 50.8 7.95 14.2 12.7 5.23 1.5 1
300 1500
3/4
2500
R 17 57.15 7.95 14.2 12.7 5.23 1.5
150
R 18 60.33 7.95 14.2 12.7 5.23 1.5
300 1500
1
2500
R 19 65.1 7.95 14.2 12.7 5.23 1.5
150
R 20 68.28 7.95 14.2 12.7 5.23 1.5
300 1500
R 21 72.24 11.13 17.5 16 7.75 1.5
2500
R 22 82.55 7.95 14.2 12.7 5.23 1.5 2
150
R 23 82.55 11.13 17.5 16 7.75 1.5 2
300 600

2500
R 24 95.25 11.13 17.5 16 7.75 1.5 2
900 1500
R 25 101.6 7.95 14.2 12.7 5.23 1.5
150
R 26 101.6 11.13 17.5 16 7.75 1.5
300 600
2
2500
R 27 107.95 11.13 17.5 16 7.75 1.5
900 1500
R 28 111.13 12.7 19.1 17.5 8.66 1.5
2500
R 29 114.3 7.95 14.2 12.7 5.23 1.5 3
150
R 30
*
117.48 11.13 17.5 16 7.75 1.5 3
300 600
R 31 123.83 11.13 17.5 16 7.75 1.5 3
300 900
R 32 127 12.7 19.1 17.5 8.66 1.5 3
2500
R 33 131.78 7.95 14.2 12.7 5.23 1.5
150
R 34 131.78 11.13 17.5 16 7.75 1.5
300 600
R 35 136.53 11.13 17.5 16 7.75 1.5 3
1500
R 36 149.23 7.95 14.2 12.7 5.23 1.5 4
150
R 37 149.23 11.13 17.5 16 7.75 1.5 4
300 900
R 38 157.18 15.88 22.4 20.6 10.49 1.5 4
2500
R 39 161.93 11.13 17.5 16 7.75 1.5 4
1500
R 40 171.45 7.95 14.2 12.7 5.23 1.5 5
150
R 41 180.98 11.13 17.5 16 7.75 1.5 5
300 900
R 42 190.5 19.05 25.4 23.9 12.32 1.5 5
2500
R 43 193.68 7.95 14.2 12.7 5.23 1.5 6
150
R 44 193.68 11.13 17.5 16 7.75 1.5 5
1500
R 45 211.15 11.13 17.5 16 7.75 1.5 6
300 900
R 46 211.15 12.7 19.1 17.5 8.66 1.5 6
1500
R 47 228.6 19.05 25.4 23.9 12.32 1.5 6
2500
R 48 247.65 7.95 14.2 12.7 5.23 1.5 8
150
R 49 269.88 11.13 17.5 16 7.75 1.5 8
300 900
R 50 269.88 15.88 22.4 20.6 10.49 1.5 8
1500
R 51 279.4 22.23 28.7 26.9 14.81 1.5 8
2500
R 52 304.8 7.95 14.2 12.7 5.23 1.5 10
150
R 53 323.85 11.13 17.5 16 7.75 1.5 10
300 900
R 54 323.85 15.88 22.4 20.6 10.49 1.5 10
1500
R 55 342.9 28.58 36.6 35.1 19.81 2.3 10
2500
R 56 381 7.95 14.2 12.7 5.23 1.5 12
150
R 57 381 11.13 17.5 16 7.75 1.5 12
300 900
R 58 381 22.23 28.7 26.9 14.81 1.5 12
1500
R 59 396.88 7.95 14.2 12.7 5.23 1.5 14
150
R 60 406.4 31.75 39.6 38.1 22.33 2.3 12
2500
R 61 419.1 11.13 17.5 16 7.75 1.5 14
300 600
R 62 419.1 15.88 22.4 20.6 10.49 1.5 14
900
R 63 419.1 25.4 33.3 31.8 17.3 2.3 14
1500
R 64 454.03 7.95 14.2 12.7 5.23 1.5 16
150
R 65 469.9 11.13 17.5 16 7.75 1.5 16
300 600
R 66 469.9 15.88 22.4 20.6 10.49 1.5 16
900
R 67 469.9 28.58 36.6 35.1 19.81 2.3 16
1500
R 68 517.53 7.95 14.2 12.7 5.23 1.5 18
150
R 69 533.4 11.13 17.5 16 7.75 1.5 18
300 600
R 70 533.4 19.05 25.4 23.9 12.32 1.5 18
900
R 71 533.4 28.58 36.6 35.1 19.81 2.3 18
1500
R 72 558.8 7.95 14.2 12.7 5.23 1.5 20
150
R 73 584.2 12.7 19.1 17.5 8.66 1.5 20
300 600
R 74 584.2 19.05 25.4 23.9 12.32 1.5 20
900
R 75 584.2 31.75 39.6 38.1 22.33 2.3 20
1500
R 76 673.1 7.95 14.2 12.7 5.23 1.5 24
150
R 77 692.15 15.88 22.4 20.6 10.49 1.5 24
300 600
R 78 692.15 25.4 33.3 31.8 17.3 2.3 24
900
R 79 692.15 34.93 44.5 41.4 24.82 2.3 24
1500

Difference Between Rtj And T&g Flange Facings?, Dimensions Stud Bolts For Rf-rtj Flanges ASME B16.5.

RTJ Flange Tolerance Chart

ASME B16.5 Tolerance
A Outside Diameter (O.D.)
  • When Outside Diameter (O.D.) is 24" or less: ±1/16" (1.6 mm)
  • When Outside Diameter (O.D.) is over 24": ±1/8" (3.2 mm)
D Inside Diameter
  • 10" and smaller: ±1/32" (0.8 millimeter)
  • 12" thru 18": +1/8" (3.2 millimeter)
  • 20" and larger: -1/16" (1.6 millimeter)
B Diameter of contact face
  • 1/16" raised face: ±1/32" (0.8 millimeter)
  • 1/4" Raised Face (RF), Tongue & Groove (T/G), (male & female), (m/f): ±1/64" (0.4 mm)
J Diameter of hub at base
  • When hub base is 24" or smaller: ±1/16" (1.6 millimeter)
  • When hub base is over 24": ±1/8" (3.2 millimeter)
H Diameter of hub at point of welding
  • 5" and smaller: +3/32" (2.4 millimeter), -1/32" (0.8 millimeter)
  • 6" and larger: +5/32" (4.0 millimeter), -1/32 (0.8 millimeter)
P Drilling
  • Bolt circle: ±1/16" (1.6 millimeter)
  • Bolt hole spacing: ±1/32" (0.8 millimeter)
  Eccentricity of bolt circle with respect to facing
  • 2 1/2" and smaller ±1/32" (0.8 millimeter) max.
  • 3" and larger ±1/16" (1.6 millimeter) max.
C Thickness
  • 18" and smaller: ±1/8" (3.2 millimeter), -0"
  • 20" and larger: ±3/16" (4.8 millimeter), -0"
K Length of hub
  • 10" and smaller: ±1/16" (1.6 millimeter)
  • 12" and larger: ±1/8" (3.2 millimeter)

Ring Type Joint Flange Thickness Calculation

ANSI B16.5 Flanges Wall Thickness
NPS (Normal Pipe Sizes) Outside Daimeter (O.D.) Schedule 10 Schedule 20 Schedule 30 STD Wall Schedule 40 Schedule 60 EXT Hvy Schedule 80 Schedule 100 Schedule 120 Schedule 140 Schedule 160 XX Hvy
½ 0.84 0.083 ... ... 0.109 0.109 ... 0.147 0.147 ... ... ... 0.188 0.294
¾ 1.05 0.083 ... ... 0.113 0.113 ... 0.154 0.154 ... ... ... 0.219 0.308
1 1.315 0.109 ... ... 0.133 0.133 ... 0.179 0.179 ... ... ... 0.25 0.358
1 ¼ 1.66 0.109 ... ... 0.14 0.14 ... 0.191 0.191 ... ... ... 0.25 0.382
1 ½ 1.9 0.109 ... ... 0.145 0.145 ... 0.2 0.2 ... ... ... 0.281 0.4
2 2.375 0.109 ... ... 0.154 0.154 ... 0.218 0.218 ... ... ... 0.344 0.436
2 ½ 2.875 0.12 ... ... 0.203 0.203 ... 0.276 0.276 ... ... ... 0.375 0.552
3 3.5 0.12 ... ... 0.216 0.216 ... 0.3 0.3 ... ... ... 0.438 0.6
3 ½ 4 0.12 ... ... 0.226 0.226 ... 0.318 0.318 ... ... ... ... 0.636
4 4.5 0.12 ... ... 0.237 0.237 ... 0.337 0.337 ... 0.438 ... 0.531 0.674
5 5.563 0.134 ... ... 0.258 0.258 ... 0.375 0.375 ... 0.5 ... 0.625 0.75
6 6.625 0.134 ... ... 0.28 0.28 ... 0.432 0.432 ... 0.562 ... 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 ...
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 ...
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 ...
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 ...
22 22 0.25 ... ... 0.375 ... ... 0.5 ... ... .... .... .... ....
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 ....
26 26 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
30 30 0.312 0.5 0.625 0.375 .... .... 0.5 .... .... .... .... .... ....
36 36 0.312 0.5 0.625 0.375 0.75 .... 0.5 .... .... .... .... .... ....
40 40 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
42 42 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..
48 48 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..

Global Supplier Of Ring Type Joint Flanges Types


ASTM A105N, 1 Inch, DN50, ASME B16.5 Ring Type Joint Flanges

ASTM A105N, 1 Inch, DN50, ASME B16.5 Ring Type Joint Flanges

Class 150 LB, FBE Surface, ASME B16.5 RTJ Flange

Class 150 LB, FBE Surface, ASME B16.5 RTJ Flanges

ASME SA-516 Grade 70, Rtj Weld Neck Flange

ASME SA-516 Grade 70, Rtj Weld Neck Flanges

OD 2876.55 * ID 2514.6 MM, Rtj Reducing Flange

OD 2876.55 * ID 2514.6 MM, Rtj Reducing Flanges


20 Inch, ASTM A182 F316L, Rtj Blind Flange

20 Inch, ASTM A182 F316L, Rtj Blind Flanges

A182 F316, 150 LB, Raised Face, Rtj Threaded Flange

A182 F316, 150 LB, Raised Face, Rtj Threaded Flanges

ASTM A105, 22 Inch, Ring Type Joint (Rtj) Flange

ASTM A105, 22 Inch, Ring Type Joint (Rtj) Flanges

BS 3293 Rtj Orifice Flange For Industrial Pipeline

BS 3293 Rtj Orifice Flange For Industrial Pipeline


30 Inch, Black Painted Surface, Rtj Slip On Flange

30 Inch, Black Painted Surface, Rtj Slip On Flanges

RF, ASTM A105, BS 3293, Rtj Socket Weld Flange

RF, ASTM A105, BS 3293, Rtj Socket Weld Flanges

4 Inch, ANSI B16.5, Class 1500 Rtj Flange

4 Inch, ANSI B16.5, Class 1500 Rtj Flanges

AWWA, 14 Inch, STD Bore, Class 900 Rtj Flange

AWWA, 14 Inch, STD Bore, Class 900 Rtj Flanges


RTJ Flanges High Pressure Applications

Stainless Steel Ring Type Joint Flanges dimensions are covered in ASME B16.5 – which covers Pipe Flange & Threaded Flange and Flanged Fittings size NPS ½” to 24”. This type Raised Faced Ring Type Joint Flanges are mostly used for high pressure applications up to pressures as high as 15,000 psi (103 MPa). There are also pressure classes such as Class 300 Ring Type Joint Flanges and the DIN PN10 RTJ Flange. According to specific needs, the different variations like the Copper Nickel RTJ Flanges or the Ring Type Joint Flanges could be used.




About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Rajtilak Metal © 2021 All Right Reserved. Website Designed And SEO by Mesotek
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy