High Hub Blind Flange Dimensions
Check Tapped Blind Flange with Threaded Hole, Standard Specification Of High Hub BLRF Flanges.
What Is A High Hub Blind Flange?
High Hub Blinds Flanges are considered to be an ideal choice, particularly because it offers excellent chloride ion stress related corrosion and chloride pitting corrosion. In addition to this, duplex stainless steel grade flanges provide a higher tensile strength in comparison to standard austenitic stainless steel High Hub Blinds Flanges, which although are more cost efficient and versatile have lower corrosion resistant properties. Although in the stainless steel categories, alloy grade 316 is referred to as marine grade by high hub blind flange manufacturers in India, due to its ability to resist corrosion when exposed to brine, sea water as well as marine environments.
Table of contents
- What Is A Tapped Blind Flange?
- High Hub Blind Flange Dimensions
- Tapped Blind Flange Dimensions
- Tapped Blind Flange with Threaded Hole
- High Hub Blinds Flanges Price List
- Tapped Hub Blind Flange Specification
- Stainless Steel High Hub Blind Flanges Pressure Rating Chart
- Drilled Tapped Blind Flanges Thickness
- Tapped Hub Blind Flange Bolt Chart
- Carbon steel High Hub Blinds Flanges Gasket Dimensions
- Buy Type Of Tapped Blind Flange At Best Price

What Is A Tapped Blind Flange?
Tapped Blind Flange are predominantly used to close ends of a piping system. This Drilled Tapped Blind Flanges is a type of a round plate without a centre hold, although these flanges are produced with all the proper bolt holes. Tapped Hub Blind Flange are used in order to provide positive closer at the ends of pipes, valves as well as equipment nozzles. These Tapped Blind Flange, we produce are available across the market in various sizes and different materials. This can be customised depending on the client’s needs or the specification the Series A & B Tapped Blind Flanges have been ordered in. For instance, Nickel Alloy 200 Tapped Blind Flange is used when the application’s primary requirement is exceptional resistance to corrosion from caustic alkalis at varying concentrations and temperatures, especially at elevated temperature settings.
High Hub Blind Flange Dimensions

Item ID | Description Of Class 150 High Hub Blind Flanges |
1FF .51 RHHBLD | 1/2 150 RF High Hub Blind ANSI B16.5 001 lbs |
1FF .751RHHBL | 3/4 150 RF High Hub Blind ANSI B16.5 002 lbs |
1FF 11RHHBL | 1 150 RF High Hub Blind ANSI B16.5 002 lbs |
1FF 1.51RHHBL | 1 1/2 150 RF High Hub Blind ANSI B16.5 004 lbs |
1FF 21RHHBL | 2 150 RF High Hub Blind ANSI B16.5 005 lbs |
1FF 31RHHBL | 3 150 RF High Hub Blind ANSI B16.5 009 lbs |
1FF 41RHHBL | 4 150 RF High Hub Blind ANSI B16.5 017 lbs |
Item ID | Description Of Class 300 HH High Hub Blind Flanges |
1FF .53RHHBL | 1/2 300 RF High Hub ANSI B16.5 002 lbs |
1FF .753RHHBL | 3/4 300 RF High Hub ANSI B16.5 003 lbs |
1FF 13RHHBL | 1 300 RF High Hub ANSI B16.5 003 lbs |
1FF 1.53RHHBL | 1 1/2 300 RF High Hub ANSI B16.5 006 lbs |
1FF 23RHHBL | 2 300 RF High Hub ANSI B16.5 008 lbs |
Item ID | Class 600 HH High Hub Blind Flanges Description |
1FF .756RHHBL | 3/4 600 RF High Hub ANSI B16.5 004 lbs |
1FF .56RHHBL | 1/2 600 RF High Hub ANSI B16.5 004 lbs |
1FF 16RHHBL | 1 600 RF High Hub ANSI B16.5 004 lbs |
1FF 1.56RHHBL | 1 1/2 600 RF High Hub ANSI B16.5 008 lbs |
1FF 26RHHBL | 2 600 RF High Hub ANSI B16.5 010 lbs |
Tapped Blind Flange Dimensions

Normal Pipe Sizes | D | G | K | T |
---|---|---|---|---|
1/2 | 90 | 34.9 | 60.3 | 9.6 |
3/4 | 100 | 42.9 | 69.9 | 11.2 |
1 | 110 | 50.8 | 79.4 | 12.7 |
1-1/4 | 115 | 63.5 | 88.9 | 14.3 |
1-1/2 | 125 | 73.0 | 98.4 | 15.9 |
2 | 150 | 92.1 | 120.7 | 17.5 |
2-1/2 | 180 | 104.8 | 139.7 | 20.7 |
3 | 190 | 127.0 | 152.4 | 22.3 |
3-1/2 | 215 | 139.7 | 177.8 | 22.3 |
4 | 230 | 157.2 | 190.5 | 22.3 |
5 | 255 | 185.7 | 215.9 | 22.3 |
6 | 280 | 215.9 | 241.3 | 23.9 |
8 | 345 | 269.9 | 298.5 | 27.0 |
10 | 405 | 323.8 | 362.0 | 28.6 |
12 | 485 | 381.0 | 431.8 | 30.2 |
14 | 535 | 412.8 | 476.3 | 33.4 |
16 | 595 | 469.9 | 539.8 | 35.0 |
18 | 635 | 533.4 | 577.9 | 38.1 |
20 | 700 | 584.2 | 635.0 | 41.3 |
22 | 750 | 641.4 | 692.2 | 44.5 |
24 | 815 | 692.2 | 749.3 | 46.1 |
Tapped Blind Flange with Threaded Hole
*Size | *T |
---|---|
3/8" | 10.5 |
1/2" | 13.5 |
3/4" | 14.0 |
1" | 17.5 |
1-1/4" | 18.1 |
1-1/2" | 18.3 |
2" | 19.4 |
Flanges Price List India | |||||
---|---|---|---|---|---|
Type Of Flanges | Size | Material | Class | Price In India (INR) | |
High Hub Blind Flanges | 3/4" | ASTM A105 | Class 150 | 130.00 | |
High Hub Blind Flanges | 1" | ASTM A105 | Class 150 | 230.32 | |
High Hub Blind Flanges | 1-1/2" | ASTM A105 | Class 150 | 310.00 | |
High Hub Blind Flanges | 2" | ASTM A105 | Class 150 | 470.oo | |
Tapped Blind Flange | 2" | ASTM A105 | Class 150 | 661.00 | |
Tapped Blind Flange | 4" | ASTM A105 | Class 150 | 1380.78 |
Please note this is an approx Price of High Hub Blind Flange in Mumbai, India. For final Tapped Blind Flange Price List Please Call on 91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com

Refer Stainless Steel High Hub Blinds Flanges Weight Chart According to ASME B16.5 And Tapped BLRF Flanges Dimensions.
Tapped Hub Blind Flange Specification
Material Specification Of : | Tapped Blind Flange And High Hub Blind Flange |
---|---|
Pressure Rating | Class 150 To Class 2500 |
High Temperature | Above 200°C (400°F) For Class 150 Or Above 400°C (750°F) |
Low Temperature | Above -29 Degree C (−20°F) |
Common Types Of Flanges: | Slip On (SORF), Weld Neck (WNRF), Blind (BLRF), Lap Joint (Loose), Threaded (NPT), Socket-Weld (SWRF) |
Special Types Of Flanges : | Nipoflange, Elboflange, Latroflange, Swivel Flange, Expanding Flange, Reducing Flange, Weldoflange |
Marking Standard | Name of Manufacturer Schedule Type of Flange Facing Nominal Pipe Size Pressure Class ASME B16 Designation |
Standard Cover : | pressure ratings & temperature ratings, materials, marking, dimensions, weight, tolerances, testing |
Contact Faces | RTJ (Ring Type Joint), FF (Flat Face), RF (Raised Face), T/G (Tongue And Groove ), M/F (Male And Female) |
Size Chart | Normal Pipe Size 1/2 to NPS 24" |
Materials | Stainless Steel (Grade 304/L, 316/L), Carbon Steel (ASTM A105 And ASTM A350), Alloy Steel (ASTM A182), Mild Steel, Duplex Steel, Pressure Vessel Steel, Titanium, Super Duplex Steel, Nickel Alloy, Monel, Inconel, Hastelloy, Copper Nickel, Cast Iron, Wrought Iron. |
Thickness | Normal Pipe Size ≤ 18 |
Bore Diameter | Normal Pipe ≤ 10 |
Flanges Standards | EN 1092-1, JIS, ASME B16.5, ASME B16.47 type A, UNI, DIN |
Bolt Type | high strength bolts medium strength bolts low strength bolts |
European Standard Flanges | JIS B2220 Flanges (5k to 30k) and KS1503 flanges |
Russian-Standard Flanges | GOST 12820 / 12821-80, DIN, UNI, EN 1092-1 |
South African Standard Flanges | SANSflanges And SABS flanges |
Surface Finish | smooth, concentric serrated, stock |
Gaskets Types | Full Face Gasket Flat Ring Gasket Metallic Ring Gakset |
Advantages Of Pipe Flange | Used to Connect Pipe System Easy Repair Pipe System Assembled Without Welding |
Stainless Steel High Hub Blind Flanges Pressure Rating Chart
ASME B16.5 Pressure Pressure | |||||||
---|---|---|---|---|---|---|---|
Temperature (°C) | Class | ||||||
Class 150 | Class 300 | Class 400 | Class 600 | Class 900 | Class 1500 | Class 2500 | |
-29 - 38 | 19.8 | 51.7 | 68.9 | 103.4 | 155 | 259 | 431 |
50 | 19.5 | 51.7 | 68.9 | 103.4 | 155 | 259 | 431 |
100 | 17.7 | 51.5 | 68.7 | 103.0 | 155 | 258 | 429 |
150 | 15.8 | 50.2 | 66.8 | 100.3 | 151 | 251 | 418 |
200 | 13.8 | 48.6 | 64.8 | 97.2 | 146 | 243 | 405 |
250 | 12.1 | 46.3 | 61.7 | 92.7 | 139 | 232 | 386 |
300 | 10.2 | 42.9 | 57.0 | 85.7 | 129 | 214 | 357 |
325 | 9.3 | 41.4 | 55.0 | 82.6 | 124 | 207 | 344 |
350 | 8.4 | 40.0 | 53.4 | 80.0 | 120 | 200 | 334 |
375 | 7.4 | 37.8 | 50.4 | 75.7 | 114 | 189 | 315 |
400 | 6.5 | 34.7 | 46.3 | 69.4 | 104 | 174 | 290 |
425 | 5.5 | 28.8 | 38.4 | 57.5 | 86.3 | 144 | 240 |
450 | 4.6 | 23.0 | 30.7 | 46.0 | 69.0 | 115 | 192 |
475 | 3.7 | 17.1 | 22.8 | 34.2 | 51.3 | 85.4 | 142 |
500 | 2.8 | 11.6 | 15.4 | 23.2 | 34.7 | 57.9 | 96.5 |
538 | 1.4 | 5.9 | 7.9 | 11.8 | 17.7 | 29.5 | 49.2 |
Drilled Tapped Blind Flanges Thickness
Tapped Blind Flange Wall Thickness | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
NPS (Normal Pipe Sizes) | Outside Daimeter (O.D.) | Schedule 10 | Schedule 20 | Schedule 30 | STD Wall | Schedule 40 | Schedule 60 | EXT Hvy | Schedule 80 | Schedule 100 | Schedule 120 | Schedule 140 | Schedule 160 | XX Hvy |
½ | 0.84 | 0.083 | ... | ... | 0.109 | 0.109 | ... | 0.147 | 0.147 | ... | ... | ... | 0.188 | 0.294 |
¾ | 1.05 | 0.083 | ... | ... | 0.113 | 0.113 | ... | 0.154 | 0.154 | ... | ... | ... | 0.219 | 0.308 |
1 | 1.315 | 0.109 | ... | ... | 0.133 | 0.133 | ... | 0.179 | 0.179 | ... | ... | ... | 0.25 | 0.358 |
1 ¼ | 1.66 | 0.109 | ... | ... | 0.14 | 0.14 | ... | 0.191 | 0.191 | ... | ... | ... | 0.25 | 0.382 |
1 ½ | 1.9 | 0.109 | ... | ... | 0.145 | 0.145 | ... | 0.2 | 0.2 | ... | ... | ... | 0.281 | 0.4 |
2 | 2.375 | 0.109 | ... | ... | 0.154 | 0.154 | ... | 0.218 | 0.218 | ... | ... | ... | 0.344 | 0.436 |
2 ½ | 2.875 | 0.12 | ... | ... | 0.203 | 0.203 | ... | 0.276 | 0.276 | ... | ... | ... | 0.375 | 0.552 |
3 | 3.5 | 0.12 | ... | ... | 0.216 | 0.216 | ... | 0.3 | 0.3 | ... | ... | ... | 0.438 | 0.6 |
3 ½ | 4 | 0.12 | ... | ... | 0.226 | 0.226 | ... | 0.318 | 0.318 | ... | ... | ... | ... | 0.636 |
4 | 4.5 | 0.12 | ... | ... | 0.237 | 0.237 | ... | 0.337 | 0.337 | ... | 0.438 | ... | 0.531 | 0.674 |
5 | 5.563 | 0.134 | ... | ... | 0.258 | 0.258 | ... | 0.375 | 0.375 | ... | 0.5 | ... | 0.625 | 0.75 |
6 | 6.625 | 0.134 | ... | ... | 0.28 | 0.28 | ... | 0.432 | 0.432 | ... | 0.562 | ... | 0.719 | 0.864 |
8 | 8.625 | 0.148 | 0.25 | 0.277 | 0.322 | 0.322 | 0.406 | 0.5 | 0.5 | 0.594 | 0.719 | 0.812 | 0.906 | 0.875 |
10 | 10.75 | 0.165 | 0.25 | 0.307 | 0.365 | 0.365 | 0.5 | 0.5 | 0.594 | 0.719 | 0.844 | 1 | 1.125 | 1 |
12 | 12.75 | 0.18 | 0.25 | 0.33 | 0.375 | 0.406 | 0.562 | 0.5 | 0.688 | 0.844 | 1 | 1.125 | 1.312 | 1 |
14 | 14 | 0.25 | 0.312 | 0.375 | 0.375 | 0.438 | 0.594 | 0.5 | 0.75 | 0.938 | 1.094 | 1.25 | 1.406 | ... |
16 | 16 | 0.25 | 0.312 | 0.375 | 0.375 | 0.5 | 0.656 | 0.5 | 0.844 | 1.031 | 1.219 | 1.438 | 1.594 | ... |
18 | 18 | 0.25 | 0.312 | 0.438 | 0.375 | 0.562 | 0.75 | 0.5 | 0.938 | 1.156 | 1.375 | 1.562 | 1.781 | ... |
20 | 20 | 0.25 | 0.375 | 0.5 | 0.375 | 0.594 | 0.812 | 0.5 | 1.031 | 1.281 | 1.5 | 1.75 | 1.969 | ... |
22 | 22 | 0.25 | ... | ... | 0.375 | ... | ... | 0.5 | ... | ... | .... | .... | .... | .... |
24 | 24 | 0.25 | 0.375 | 0.562 | 0.375 | 0.688 | 0.969 | 0.5 | 1.219 | 1.531 | 1.812 | 2.062 | 2.344 | .... |
26 | 26 | .... | .... | .... | 0.375 | .... | .... | 0.5 | .... | .... | .... | .... | .... | .... |
30 | 30 | 0.312 | 0.5 | 0.625 | 0.375 | .... | .... | 0.5 | .... | .... | .... | .... | .... | .... |
36 | 36 | 0.312 | 0.5 | 0.625 | 0.375 | 0.75 | .... | 0.5 | .... | .... | .... | .... | .... | .... |
40 | 40 | .... | .... | .... | 0.375 | .... | .... | 0.5 | .... | .... | .... | .... | .... | .... |
42 | 42 | …….. | …….. | …….. | 0.375 | …….. | …….. | 0.5 | …….. | …….. | …….. | …….. | …….. | …….. |
48 | 48 | …….. | …….. | …….. | 0.375 | …….. | …….. | 0.5 | …….. | …….. | …….. | …….. | …….. | …….. |
ISO Certified Drilled Tapped Blind Flanges Manufacturer In India, View Our Carbon Steel High Hub BLRF Flange Price List.
Tapped Hub Blind Flange Bolt Chart
Class 150 Flanges | Class 300 Flanges | Class 600 Flanges | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
NPS | # Bolts And Studs | Diameter of Bolts And Studs | Stud Length | # Bolts And Studs | Diameter of Bolts And Studs | Stud Length | # Bolts And Studs | Diameter of Bolts And Studs | Stud Length | |||
1/16 RF | RTJ | 1/16 RF | RTJ | 1/4 RF | RTJ | |||||||
1/2 | 4 | 0.50 | 2-1/4 | – | 4 | 0.50 | 2-1/2 | 3 | 4 | 0.50 | 3 | 3 |
3/4 | 4 | 0.50 | 2-1/2 | – | 4 | 0.63 | 3 | 3-1/2 | 4 | 0.63 | 3-1/2 | 3-1/2 |
1 | 4 | 0.50 | 2-1/2 | 3 | 4 | 0.63 | 3 | 3-1/2 | 4 | 0.63 | 3-1/2 | 3-1/2 |
1-1/4 | 4 | 0.50 | 2-3/4 | 3-1/4 | 4 | 0.63 | 3-1/4 | 3-3/4 | 4 | 0.63 | 3-3/4 | 3-3/4 |
1-1/2 | 4 | 0.50 | 2-3/4 | 3-1/4 | 4 | 0.75 | 3-1/2 | 4 | 4 | 0.75 | 4-1/4 | 4-1/4 |
2 | 4 | 0.63 | 3-1/4 | 3-3/4 | 8 | 0.63 | 3-1/2 | 4 | 8 | 0.63 | 4-1/4 | 4-1/4 |
2-1/2 | 4 | 0.63 | 3-1/2 | 4 | 8 | 0.75 | 4 | 4-1/2 | 8 | 0.75 | 4-3/4 | 4-3/4 |
3 | 4 | 0.63 | 3-1/2 | 4 | 8 | 0.75 | 4-1/4 | 4-3/4 | 8 | 0.75 | 5 | 5 |
3-1/2 | 8 | 0.63 | 3-1/2 | 4 | 8 | 0.75 | 4-1/4 | 5 | 8 | 0.88 | 5-1/2 | 5-1/2 |
4 | 8 | 0.63 | 3-1/2 | 4 | 8 | 0.75 | 4-1/2 | 5 | 8 | 0.88 | 5-3/4 | 5-3/4 |
5 | 8 | 0.75 | 3-3/4 | 4-1/4 | 8 | 0.75 | 4-3/4 | 5-1/4 | 8 | 1.00 | 6-1/2 | 6-1/2 |
6 | 8 | 0.75 | 4 | 4-1/2 | 12 | 0.75 | 4-3/4 | 5-1/2 | 12 | 1.00 | 6-3/4 | 6-3/4 |
8 | 8 | 0.75 | 4-1/4 | 4-3/4 | 12 | 0.88 | 5-1/2 | 6 | 12 | 1.13 | 7-1/2 | 7-3/4 |
10 | 12 | 0.88 | 4-1/2 | 5 | 16 | 1.00 | 6-1/4 | 6-3/4 | 16 | 1.25 | 8-1/2 | 8-1/2 |
12 | 12 | 0.88 | 4-3/4 | 5-1/4 | 16 | 1.13 | 6-3/4 | 7-1/4 | 20 | 1.25 | 8-3/4 | 8-3/4 |
14 | 12 | 1.00 | 5-1/4 | 5-3/4 | 20 | 1.13 | 7 | 7-1/2 | 20 | 1.38 | 9-1/4 | 9-1/4 |
16 | 16 | 1.00 | 5-1/4 | 5-3/4 | 20 | 1.25 | 7-1/2 | 8 | 20 | 1.50 | 10 | 10 |
18 | 16 | 1.13 | 5-3/4 | 6-1/4 | 24 | 1.25 | 7-3/4 | 8-1/4 | 20 | 1.63 | 10-3/4 | 10-3/4 |
20 | 20 | 1.13 | 6-1/4 | 6-3/4 | 24 | 1.25 | 8 | 8-3/4 | 24 | 1.63 | 11-1/4 | 11-1/2 |
24 | 20 | 1.25 | 6-3/4 | 7-1/4 | 24 | 1.50 | 9 | 10 | 24 | 1.88 | 13 | 13-1/4 |
Class 900 Flanges | Class 1500 Flanges | Class 2500 Flanges | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
NPS | # Bolts And Studs | Diameter of Bolts And Studs | Stud Length | # Bolts And Studs | Diameter of Bolts And Studs | Stud Length | # Bolts And Studs | Diameter of Bolts And Studs | Stud Length | |||
1/4 RF | RTJ | 1/4 RF | RTJ | 1/4 RF | RTJ | |||||||
1/2 | 4 | 0.75 | 4-1/4 | 4-1/4 | 4 | 0.75 | 4-1/4 | 4-1/4 | 4 | 0.75 | 4-3/4 | 4-3/4 |
3/4 | 4 | 0.75 | 4-1/2 | 4-1/2 | 4 | 0.75 | 4-1/2 | 4-1/2 | 4 | 0.75 | 5 | 5 |
1 | 4 | 0.88 | 5 | 5 | 4 | 0.88 | 5 | 5 | 4 | 0.88 | 5-1/2 | 5-1/2 |
1-1/4 | 4 | 0.88 | 5 | 5 | 4 | 0.88 | 5 | 5 | 4 | 1.00 | 6 | 6 |
1-1/2 | 4 | 1.00 | 5-1/2 | 5-1/2 | 4 | 1.00 | 5-1/2 | 5-1/2 | 4 | 1.13 | 6-3/4 | 6-3/4 |
2 | 8 | 0.88 | 5-3/4 | 5-3/4 | 8 | 0.88 | 5-3/4 | 5-3/4 | 8 | 1.00 | 7 | 7 |
2-1/2 | 8 | 1.00 | 6-1/4 | 6-1/4 | 8 | 1.00 | 6-1/4 | 6-1/4 | 8 | 1.13 | 7-3/4 | 8 |
3 | 8 | 0.88 | 5-3/4 | 5-3/4 | 8 | 1.13 | 7 | 7 | 8 | 1.25 | 8-3/4 | 9 |
4 | 8 | 1.13 | 6-3/4 | 6-3/4 | 8 | 1.25 | 7-3/4 | 7-3/4 | 8 | 1.50 | 10 | 10-1/4 |
5 | 8 | 1.25 | 7-1/2 | 7-1/2 | 8 | 1.50 | 9-3/4 | 9-3/4 | 8 | 1.75 | 11-3/4 | 12-1/4 |
6 | 12 | 1.13 | 7-1/2 | 7-3/4 | 12 | 1.38 | 10-1/4 | 10-1/2 | 8 | 2.00 | 13-1/2 | 14 |
8 | 12 | 1.38 | 8-3/4 | 8-3/4 | 12 | 1.63 | 11-1/2 | 11-3/4 | 12 | 2.00 | 15 | 15-1/2 |
10 | 16 | 1.38 | 9-1/4 | 9-1/4 | 12 | 1.88 | 13-1/4 | 13-1/2 | 12 | 2.50 | 19-1/4 | 20 |
12 | 20 | 1.38 | 10 | 10 | 16 | 2.00 | 14-3/4 | 15-1/4 | 12 | 2.75 | 21-1/4 | 22 |
14 | 20 | 1.50 | 10-3/4 | 11 | 16 | 2.25 | 16 | 16-3/4 | – | – | – | – |
16 | 20 | 1.63 | 11-1/4 | 11-1/2 | 16 | 2.50 | 17-1/2 | 18-1/2 | – | – | – | – |
18 | 20 | 1.88 | 12-3/4 | 13-1/4 | 16 | 2.75 | 19-1/2 | 20-3/4 | – | – | – | – |
20 | 20 | 2.00 | 13-3/4 | 14-1/4 | 16 | 3.00 | 21-1/4 | 22-1/4 | – | – | – | – |
24 | 20 | 2.50 | 17-1/4 | 18 | 16 | 3.50 | 24-1/4 | 25-1/2 | – | – | – | – |
Pressure Rating Class Of Tapped Hub Blind Flange And We Maintain Good Stock Of Class 150/ 300/ 600 High Hub BLRF Flanges.
Carbon Steel High Hub Blinds Flanges Gasket Dimensions
NPS | Gasket I.D. |
Gasket O.D. | ||||
---|---|---|---|---|---|---|
Class 150 | Class 300 | Class 400 | Class 600 | Class 900 | ||
1/2 | 0.84 | 1.875 | 2.125 | 2.125 | 2.125 | 2.50 |
3/4 | 1.06 | 2.25 | 2.625 | 2.625 | 2.625 | 2.75 |
1 | 1.31 | 2.625 | 2.875 | 2.875 | 2.875 | 3.125 |
1 1/4 | 1.66 | 3 | 3.25 | 3.25 | 3.25 | 3.50 |
1 1/2 | 1.91 | 3.375 | 3.75 | 3.75 | 3.75 | 3.875 |
2 | 2.38 | 4.125 | 4.375 | 4.375 | 4.375 | 5.625 |
2 1/2 | 2.88 | 4.875 | 5.125 | 5.125 | 5.125 | 6.50 |
3 | 3.50 | 5.375 | 5.875 | 5.875 | 5.875 | 6.625 |
4 | 4.50 | 6.875 | 7.125 | 7.00 | 7.625 | 8.125 |
5 | 5.56 | 7.75 | 8.50 | 8.375 | 9.50 | 9.75 |
6 | 6.62 | 8.75 | 9.875 | 9.75 | 10.50 | 11.375 |
8 | 8.62 | 11 | 12.125 | 12.00 | 12.625 | 14.125 |
10 | 10.75 | 13.375 | 14.25 | 14.125 | 15.75 | 17.125 |
12 | 12.75 | 16.125 | 16.625 | 16.50 | 18.00 | 19.625 |
Tapped Blind Flange Requirements, ASME B16.47 Series A And B High Hub Blind Flanges Thickness Calculation For Pressure Vessel.
Buy Type Of Tapped Blind Flange At Best Price

A182 F304, DN 50 Size, ASME B16.5 High Hub Blinds Flange

EN1092-1 TYPE 11B, Stainless Steel High Hub Blinds Flanges

ASTM A105, PN16, 150LB, Carbon Steel High Hub Blinds Flanges

24 Inch, 150#, RF, SCH 10S, Duplex Steel High Hub Blinds Flanges

Class 600, Size 10 Inch, Alloy Steel High Hub Blinds Flanges

8 Inch, Flanged RF Ends, Inconel 600 High Hub Blind Flanges

Schedule 120, Black Coating, Series A & B High Hub Flanges

Schedule STD, 6 Inch, 150 LB, Inconel High Hub Blind Flanges

B16.5, 300 LB, SCH STD, Nickel Alloy 200 High Hub Blind Flanges

RF, 22 Inch, 600BL, Hastelloy High Hub Blind Flanges

Raised Face, Schedule STD, Copper Nickel High Hub Blind Flanges

1 Inch, 150LB, SCH XS, ASME B16.47, Alloy 20 High Hub Flanges
On the other hand High Hub Blind Flange tend to be very resistant to corrosion from oxidation and can be used in extreme environments, where they have been subjected to pressure and heat.Tapped Blind Flange, are used solely on basis of their applications. Since the alloying content amongst alloy steel tends to vary.