Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

ASME B16.11 Stainless Steel Socket Weld Tee

Most Reliable ASME B16.11 Tee Manufacturer In India, We Are Supplying ANSI B16.11 Stainless Steel Tee 3000# SW To More Than 60 Locations Worldwide.

ASME B16.11 Socket Weld Tee Fittings At Lower Prices Compared To USA & UK, Check Socket Weld Tee Dimensions And Weight Chart, Manufacturer Of Carbon Steel Forged Socket Weld Tee 45 Degree In India.

ASME B16.11 Stainless Steel Socket Weld Tee is a type of pipe fitting that is used to connect three pipes of either same size or different sizes; and it has socket weld at the edges of the openings. The Asme B16.11 Tee is governed by Socket Weld Tee Dimensions ranging from ½ inches to 4 inches in diameter. The Asme B16.11 Socket Weld Tee Fittings have socket at the edges where there pipe could be inserted and welded for optimum grip. These Tee Ansi B16.11 fittings are used with smaller size pipes. The use of Tee B16.11 is very common in low cost applications. But the Asme B16.11 Sw Tee could also be used in high pressure and high cost systems depending on the requirements.


ASME B16.11 Socket Weld Tee Manufacturers In India

ASME B16.11 Socket Weld Tee Manufacturers In India

Carbon Steel Socket Weld Tee

Carbon Steel Socket Weld Tee

Stainless Steel Socket Weld Tee

Stainless Steel Socket Weld Tee

Accept all small/ Large Orders Of SS Socket Weld 45 Deg Tee, Socket Weld Long Radius 45 Degree Tees Stockholder, Buy 45° Short Radius Socket Weld Tee Certified & Tested, Specialise in distributing High Pressure 6000# Sw Tee In India.

There are specific types with an angled connection such as the Stainless Steel Socket Weld 45 Deg. Tee which has the joining connection tilted in a 45 degree angle to the straight pipe line. The Forged Socket Weld Tee is strong and it could be used in high strength systems where the joining needs to be in an angle. Also the Socket Weld Long Radius 45 Degree Tees have longer curvature radius that they can smooth up the directional change. In places where the space is not sufficient, the 45° Short Radius Socket Weld Tee is useful because of its reduced length.


What is ASME B16.11 Socket Weld Tee?


ASME B16.11 Stainless Steel Socket Weld Tee

The Ansi B16.11 Stainless Steel Socket Weld Tee is used to cover the nominal sizes up to NPS45 so that they have a wide range of uses. The socket welded Asme B16.9 45 Deg Socket Weld Tee could be used in different applications such as the water pipe linings, gas and oil, desalination projects, water purification piping and more. Also, the pressure requirements can be covered by different pressure classes such as the 45 Degree Tee 3000lb Socket Weld for example, having a 3000lb pressure mark.


Carbon Steel Socket Weld Tee Price List


SR NO DESCRIPTION NOS TOTAL PRICE TOTAL
1 TEE, SIZE: 1/2"Socket CLASS 3000# A182 F11 / 2 EA 30 2.98 89.4
2 TEE, SIZE: 3/4"Socket CLASS 3000# A182 F11 / 2 EA 30 4.27 128.1
3 TEE, SIZE: 1"Socket CLASS 3000# A182 F11 / 2 EA 30 5.46 163.8
4 TEE, SIZE: 1.5"Socket CLASS 3000# A182 F11 / 2 EA 30 12.6 378
5 TEE, SIZE: 2"Socket CLASS 3000# A182 F11 / 2 EA 12 19.44 233.28

Please note this is an approx Price of Stainless Steel Socket Weld Tee in India. For final ASME B16.11 Socket Weld Tee Fittings Price List Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.


Specification Of ASME B16.11 Stainless Steel Socket Weld Tee


Asme B16.11 Sw Tee Type Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT   
Socket Weld Tee Dimensions ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799
Stainless Steel Socket Weld Tee Form Sockte Weld Tee, Socket Weld Equal Tee
Production Grades Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel, Carbon Steel, Cupro Nickel
Asme B16.11 Tee Size 1/2″NB TO 4″NB IN
Asme B16.11 Socket Weld Tee Fittings Class 3000 LBS, 6000 LBS, 9000 LBS

ASME B16.11 Sw Tee Material


Stainless Steel Socket Weld Tee
  • ASTM A182 F304
  • ASTM A182 F304L
  • ASTM A182 F316
  • ASTM A182 F316L
  • ASTM A182 F317
  • ASTM A182 F317L
  • ASTM A182 F321
  • ASTM A182 F321H
  • ASTM A182 F347
  • ASTM A182 F347H
Super Duplex Tee Ansi B16.11 S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Incoloy Tee B16.11 Incoloy 800, Incoloy 800H, Incoloy 800HT (UNS N08800), Incoloy 825 (UNS N08825)
254 Smo 45 Degree Tee 3000lb Socket Weld SMO 254/6Mo, UNS S31254, DIN 1.4547
Nimonic 45 Degree Tee 3000lb Socket Weld Nimonic 75, Nimonic 80A, Nimonic 90
Carbon Steel Socket Weld Tee
  • ASTM A105
  • ASME SA105
  • DIN 1.0402
  • DIN 1.0460
  • DIN 1.0619
  • ASTM A105N
  • ASME SA105N
  • ASTM A350 LF2
  • ASME SA350
  • High Yield CS ASTM A694
Alloy 20 Carpenter® 20 Alloy, Alloy 20Cb-3
Aluminium Forged Socket Weld Tee 45 Degree 5052 /6061/ 6063 / 2017 / 7075 / etc.
Nickel 45° Short Radius Socket Weld Tee Nickel 200, Nickel 201
Duplex 45 Degree Tee 3000lb Socket Weld S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Alloy Steel Tee B16.11
  • ASTM A182 F5
  • ASTM A182 F9
  • ASTM A182 F11
  • ASTM A182 F22
  • ASTM A182 F91
Titanium Forged Socket Weld Tee 45 Degree
  • ASTM B381 Titanium Gr. 1
  • ASTM B381 Titanium Gr. 2
  • ASTM B381 Titanium Gr. 4
  • ASTM B381 Titanium Gr. 5
  • ASTM B381 Titanium Gr. 7
Inconel Forged Socket Weld Tee 45 Degree/td>
  • Inconel 600
  • Inconel 601
  • Inconel 625
  • Inconel 718
  • Inconel x750
Hastelloy Socket Weld Tee Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X
Monel 45° Short Radius Socket Weld Tee Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)
Copper Forged Socket Weld Tee 45 Degree T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Copper Nickel 45° Short Radius Socket Weld Tee Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640
Brass Tee Ansi B16.11 3602 / 2604 / H59 / H62 / etc.
Other Tee B16.11 material Tin bronze, Aluminum bronze, Lead bronze

Rajtilak Metal is an ISO certified ASME B16.11 Socket Weld Tee manufacturer & ASME B16.11 Tee distributor in India

Types Of ASME B16.11 Tee


1 x 1 x 1/2 in. 3000# 304L Stainless Steel Socket Weld Tee

1 x 1 x 1/2 in. 3000# 304L Stainless Steel Socket Weld Tee

10 x 10 x 4 in. Weld Schedule 10 304L Stainless Steel Socket Weld Tee

10 x 10 x 4 in. Weld Schedule 10 304L Stainless Steel Socket Weld Tee

1/2 in. 304L 304L Stainless Steel Socket Tee

1/2 in. 304L 304L Stainless Steel Socket Tee

1-1/2 in. 3000# 304L Stainless Steel Socket Tee

1-1/2 in. 3000# 304L Stainless Steel Socket Tee

2 x 2 x 1 in. Socket 3000# 304L Stainless Steel Socket Weld Tee

2 x 2 x 1 in. Socket 3000# 304L Stainless Steel Socket Weld Tee

3/4 in. 150# 304 Stainless Steel Socket Tee

3/4 in. 150# 304 Stainless Steel Socket Tee

1-1/2 in. 3000# 304L Stainless Steel Socket Tee

1-1/2 in. 3000# 304L Stainless Steel Socket Tee

1 x 1 x 1/2 in. Socket 3000# 304L Stainless Steel Socket Weld Tee

1 x 1 x 1/2 in. Socket 3000# 304L Stainless Steel Socket Weld Tee

1/2 in. 150# 304L Stainless Steel Socket Weld Tee

1/2 in. 150# 304L Stainless Steel Socket Weld Tee

1-1/2 in. 150# 304 Stainless Steel Socket Tee

1-1/2 in. 150# 304 Stainless Steel Socket Tee

1/2 in. 150# 316L Stainless Steel Socket Tee

1/2 in. 150# 316L Stainless Steel Socket Tee

1 x 1 x 3/4 in. Socket 316L Stainless Steel Socket Weld Tee

1 x 1 x 3/4 in. Socket 316L Stainless Steel Socket Weld Tee


Rajtilak Metal is a Govt. approved certified Stockist of ASME B16.11 Socket Weld Tee in India, We have our ASME B16.11 Stainless Steel Socket Weld Tee distributor and wholesaler in Malaysia, Indonesia, Singapore, United Arab Emirates (UAE) & South Africa. We are well-known as a trusted Manufacturer of Carbon Steel Forged Socket Weld Tee in Mumbai, India.


ASME B16.5 Socket Weld Tee Dimensions


ASME B16.5 Socket Weld Tee Dimensions

NPS Socket Bore Depth Socket Bore dia
B J D
1/2 21.95
21.70
10 16.6
15
3/4 27.30
27.05
13 21.7
20.2
1 34.05
33.80
13 27.4
25.9
1.1/4 42.80
42.55
13 35.8
34.3
1.1/2 48.90
48.65
13 41.7
40.1
2 61.35
61.10
16 53.5
51.7
2.1/2 74.20
73.80
16 64.2
61.2
3 90.15
89.80
16 79.5
46.4
4 115.80
115.45
19 103.8
100.7
1/2 4.65
4.10
3.75 15.5
3/4 4.90
4.25
3.90 19.5
1 5.70
5.00
4.55 22
1.1/4 6.05
5.30
4.85 27
1.1/2 6.35
5.55
5.10 32
2 6.95
6.05
5.55 38
2.1/2 8.75
7.65
7.00 41.5
3 9.50
8.30
7.60 57.5
4 10.70
9.35
8.55 66.5

3000# Sw Tee Dimensions


NPS Socket Bore Depth Socket Bore dia
B J D
1/2 21.95
21.70
10 16.6
15
3/4 27.30
27.05
13 21.7
20.2
1 34.05
33.80
13 27.4
25.9
1.1/4 42.80
42.55
13 35.8
34.3
1.1/2 48.90
48.65
13 41.7
40.1
2 61.35
61.10
16 53.5
51.7
2.1/2 74.20
73.80
16 64.2
61.2
3 90.15
89.80
16 79.5
46.4
4 115.80
115.45
19 103.8
100.7
NPS Socket
WT
Body
WT
Center to bottom of socket
C G A
1/2 4.65
4.10
3.75 15.5
3/4 4.90
4.25
3.90 19.5
1 5.70
5.00
4.55 22
1.1/4 6.05
5.30
4.85 27
1.1/2 6.35
5.55
5.10 32
2 6.95
6.05
5.55 38
2.1/2 8.75
7.65
7.00 41.5
3 9.50
8.30
7.60 57.5
4 10.70
9.35
8.55 66.5

Rajtilak Metal is a manufacturer and supplier of Stainless Steel Socket Weld Tee & Asme B16.11 Socket Weld Tee Fittings offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.


6000# Socket Weld Tee Dimensions


NPS Socket Bore Depth Socket Bore dia
B J D
1/2 21.95
21.70
10 12.5
11
3/4 27.30
27.05
13 16.3
14.8
1 34.05
33.80
13 21.5
19.9
1.1/4 42.80
42.55
13 30.2
28.7
1.1/2 48.90
48.65
13 34.7
33.2
2 61.35
61.10
16 43.6
42.1
1/2 5.95
5.20
4.80 19.5
3/4 6.95
6.05
5.55 22.5
1 7.90
6.95
6.35 27
1.1/4 7.90
6.95
6.35 32
1.1/2 8.90
7.80
7.15 38
2 10.90
9.50
8.75 41

General notes:

  • Dimensions are in millimeters unless otherwise indicated.
  • Socket Bore (B) – Maximum and minimum dimensions.
  • Bore Diameter (D) – Maximum and minimum dimensions.
  • Socket wall thickness – (C) – Average of Socket wall thickness.
  • Dimensional tolerances center to bottom of socket – (A)
    NPS 1/2 and NPS 3/4 = +/- 1.5 mm
    NPS 1 to NPS 2 = +/- 2 mm
    NPS 2.1/2 to NPS 4 = +/- 2.5 mm

ANSI B16.11 Socket Weld Tee Weight Chart


ANSI B16.11 Socket Weld Tee Weight Chart

We are Manufacturer and Exporter of ASME B16.11 Socket Weld Tee, Stainless Steel Socket Weld Tee in Mumbai, India. All of our ASME B16.11 Tee is made and tried to worldwide guidelines, and specifications as per ASME, ANSI & ASTM, etc. We have our Manufacturing Unit and Dealers in Gujarat, Ahmedabad, 45 Degree Tee 3000lb Socket Weld for Pune, Chennai, Indore, Kolkata, Delhi, ASME B16.11 Socket Weld Tee Fittings for Nagpur, Bhosari, Bangalore, Punjab, Ludhiana, Gurgaon, Raipur, Aurangabad, Kolhapur, Chhattisgarh, Tamil Nadu, Karnataka, Rajkot, Karnataka, Tee ANSI B16.11 for Uttar Pradesh, 6000# Sw Tee for Faridabad, Khopoli, Madhya Pradesh, Jaipur, 3000# Sw Tee for Ghaziabad, Haryana, Vadodara, West Bengal, Rajasthan.


Manufacturing Standards of ASME B16.11 Stainless Steel Socket Weld Tee


ASME Socket Weld Tee: ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799
EN Tee B16.11: EN10253-1, EN10253-2
DIN Tee Ansi B16.11: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011

We are well-known as a trusted vendor as a Stainless Steel Socket Weld Tee manufactuers & 45 Degree Tee 3000lb Socket Weld distributor in your country. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery. Rajtilak Metal is a Govt. approved certified ASME B16.11 Class 3000 Socket Weld Tee And Class 9000 Socket Weld Tee in India. All of our ASME B16.11 Socket Weld Tee are manufactured and tested to international standards, and specifications as per JIS, EN, DIN, ASTM etc.


Check Our Client In Worldwide


Ennore Petrochemical Cluster Project

Ennore Petrochemical Cluster Project (India), Chennai, India

Ophir Oil Field Development

Ophir Oil Field Development,
Offshore Peninsular, Malaysia

Chevron Indonesia Deepwater Development Project

Chevron Indonesia Deepwater Development Project,
Jakarta, Indonesia

Batangas LNG Terminal

Batangas LNG Terminal, Batangas, Philippines

Bahrain Deep Gas Exploration Project

Bahrain Deep Gas Exploration Project, Manama, Bahrain

Al-Zour New Refinery Project

Al-Zour New Refinery Project,
Zour, Kuwait

KrisEnergy’s Cambodia Oil Project

KrisEnergy’s Cambodia Oil Project,
Cambodia, Thailand

Dung Quat Refinery Project

Dung Quat Refinery Project,
Quang Ngai, Vietnam

Khulud Tight Gas Project

Khulud Tight Gas Project,
Yibal, Oman

Zuluf Field Expansion Project

Zuluf Field Expansion Project,
Arabian Gulf, Offshore Saudi Arabia (KSA)

Abu Dhabi Gas Distribution Network Pipeline Project

Abu Dhabi Gas Distribution Network Pipeline Project,
Abu Dhabi, United Arab Emirates (UAE)

Bul Hanine Redevelopment

Bul Hanine Redevelopment,
Qatari Coastline, Qatar


ViewStainless Steel Socket Weld Tee Weight, We stock and supply NPS 1/2 to 2 Carbon Steel Tee B16.11, Looking to buy ASME B16.11 Forged 45 Degree Socket Weld Tee? contact Rajtilak Metal, A Reliable ASME B16.11 45 Deg Socket Weld Tee supplier in India, Exporter Of ASME B 16.11 Socketweld Class 3000 Socket Weld Tee, Purchase Tee ANSI B16.11 Best Price & Fast Delivery.

Stocking Distributor Of Class 6000 Socket Weld Tee, Copper Nickel 45 Deg Socket weld Pipe Tee Manufacturer, View Our Complete Range Of Alloy Steel Forged Socket Weld Tee 45 Degree, Visit Duplex Steel Socket Weld Long Radius 45 Degree factory in India, Contact US for Class 9000 Socket Weld Tee instant delivery, We Supply Large Amount Of ASME B16.11 Stainless Steel Socket Weld Tee stock World Wide At Best Price.

Rajtilak Metal is a manufacturer and supplier of ASME B16.11 Socket Weld Tee offering in all Ratings up to 3000#, built a distribution network with more then 15 countries globally like Malaysia, India, Thailand, Vietnam, 6000# Sw Tee for Indonesia, Saudi Arabia (KSA), Singapore, Kuwait, Qatar, Philippines, United Arab Emirates (UAE), South Africa, UK, Oman, Bahrain. You can mail to info@rajtilakmetal.com for Stainless Steel Socket Weld 45 Deg. Tee to induce live quotes now. Looking to buy Forged Socket Weld Tee 45 Degree at the best cost in India.