Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

ANSI B16.11 Socket Weld Cross

Check Class 3000 Stainless Steel Socket Weld Equal Cross Dimensions.

What Is Socket Weld Cross?


Stainless Steel Socket Weld Cross is a type of socket weld fitting. It has four openings and looks like a cross with four sockets at each opening. The socket welds are usually used on smaller size pipes such as the Asme B16.11 Cross which is up to 4 inches in diameter. Socket Weld Cross vary according to the length of the arm and the size of the piping. Socket Weld Cross Tee can connect four equal sized pipes or different sized pipes. The Socket Weld Cross Section is designed to hold the various sizes of the pipes it has to be attached to. A B16.11 Socket Weld Cross can be applied in domestic and low cost pipe systems.

Socket Weld Cross

Socket Weld Cross

Stainless Steel Socket Weld Cross

Stainless Steel Socket Weld Cross

Forged Socket Weld Equal Cross

Forged SW Equal Cross

Stainless Steel Socket Weld Cross Use In Power Generation?


Stainless steel is the most used material for the ASME B16.11 Stainless Steel Socket Weld Cross, but there are other materials used to produce it for specific requirements. The Ss 310 Socket Weld Cross is also used with the equal grade piping to make sure the overall strength of the system is maintained. Ansi B16.11 Forged Socket Weld Cross is used in water lines, gas lines and other smaller applications where the damage or problems won’t cost much. The Asme B16.11 Socket Weld Cross also has its variations in higher sizes with different standards. They can be used with higher pressures as well. The Forged Equal Cross 3000lb Socket Weld is such fitting that can withstand higher pressures up to 3000lb.


View Our Global Sales Network For Forged Socket Weld Cross In Mumbai, India.

ASME B16.11 Stainless Steel Socket Weld Cross

The Socket Weld Cross Fitting is not preferred in high pressure systems because it is unstable under pressure. It is also expensive than having two tee fittings. So the usage is only with specific conditions where other fittings cannot be applied. Since the stability is low, to prevent damages, the Forged Socket Weld Equal Cross is distributed in forged conditions. The forged Socket Weld Forged Equal Cross is stronger and can withstand higher pressures and temperatures. It is also made in different materials like the Stainless Steel Socket Weld Cross


ASME B16.11 SW Equal Cross Specification Chart


Specification : ASME B16.11 Socket Weld Cross
Threaded : No Threaded
Material : Stainless Steel, Carbon Steel, Inconel, Hastelloy, Copper Nickel, Cast Iron, Alloy Steel, Mild Steel, Duplex Steel & Super Duplex Steel, Wrought Iron.
ASME B16.11 Tolerance : 0.06 inches (1.6 millimeter)
Minimum Wall Thickness: 12.5%, minimum wall thickness
Finishing: Carbon Steel : Gavlvanized Or Black
Stainless Steel : Pickled
Standards ASME B16.11, Bs3799, MSS SP 79, JIS B2302, MSS SP 95, MSS SP 83
Size Socket Weld Fittings = ½” – 8”
Pressure Rating : Socket Weld Fittings = 2000LB, 3000LB, 6000LB
Types : Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee, Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple, 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow.
MSS SP-95 : Bull Plugs & Swage(d) Nipples
Schedule 3000 - Schedule 80/XS, 6000 - Schedule 160, 9000 Schedule XXS.

Refer ASME B16.11 Forged Socket Weld Cross Weight Chart According to ANSI B16.11.

Socket Weld Cross Dimensions


Socket Weld Cross Dimensions

Class 3000 Socket Weld Cross Dimensions In Inches

Normal Pipe Sizes Socket Bore Socket Depth Bore Diameter
B J D
1/2 21.95
21.70
10 16.6
15
3/4 27.30
27.05
13 21.7
20.2
1 34.05
33.80
13 27.4
25.9
1.1/4 42.80
42.55
13 35.8
34.3
1.1/2 48.90
48.65
13 41.7
40.1
2 61.35
61.10
16 53.5
51.7
2.1/2 74.20
73.80
16 64.2
61.2
3 90.15
89.80
16 79.5
46.4
4 115.80
115.45
19 103.8
100.7
1/2 4.65
4.10
3.75 15.5
3/4 4.90
4.25
3.90 19.5
1 5.70
5.00
4.55 22
1.1/4 6.05
5.30
4.85 27
1.1/2 6.35
5.55
5.10 32
2 6.95
6.05
5.55 38
2.1/2 8.75
7.65
7.00 41.5
3 9.50
8.30
7.60 57.5
4 10.70
9.35
8.55 66.5

Contact Us Today For Buy Class 6000 Carbon Steel Socket Weld Cross At Best Price In India.

Class 6000 Socket Weld Cross Dimensions In MM


Normal Pipe Sizes Socket Bore Socket Depth Bore Diameter
B J D
1/2 21.95
21.70
10 12.5
11
3/4 27.30
27.05
13 16.3
14.8
1 34.05
33.80
13 21.5
19.9
1.1/4 42.80
42.55
13 30.2
28.7
1.1/2 48.90
48.65
13 34.7
33.2
2 61.35
61.10
16 43.6
42.1
1/2 5.95
5.20
4.80 19.5
3/4 6.95
6.05
5.55 22.5
1 7.90
6.95
6.35 27
1.1/4 7.90
6.95
6.35 32
1.1/2 8.90
7.80
7.15 38
2 10.90
9.50
8.75 41

IBR Approved Socket Weld Cross Fittings Manufacturer And Supplier In India.

Socket Weld Cross Fitting Size Chart According to ASME B16.11


Socket Weld Cross Fitting Size Chart According to ASME B16.11

Carbon Steel Socket Weld Cross Temperature Ratings Table

Carbon Steel Socket Weld Cross Pressure Rating

Tolerance Chart Of Forged Socket Weld Equal Cross

ANSI B16.11 American Standard Dimensional Tolerances
"A" - Socket Center To BottomFor Size
1/8" And 1/4"
± 0.03"
3/8", 1/2" And 3/4"± 0.06"
1", 1-1/4", 1-1/2" And 2"± 0.08"
2-1/2", 3", And 4"± 0.10"
"B" - Socket Bore DiameterFor Size
1-1/2" And Smaller
+ 0.020"
- 0.000"
2", 2-1/2", 3" And 4"+ 0.025"
- 0.000"
"C" - Socket Wall Thick.Min. = 1.09 T (But Not Less Than 5/32")
T = Wall Thickness Of Nominal Pipe Sizes
"D" - Bore Diameter Of Pipe FittingFor Size
2" And Smaller
± 0.030"
2-1/2", 3" And 4"± 0.060"
"E" - Sockets- Bottom To Bottom - Full CouplingsFor Size
1/8" And 1/4"
± 0.06"
3/8", 1/2" And 3/4"± 0.12"
1", 1-1/4", 1-1/2" And 2"± 0.16"
2-1/2", 3", And 4"± 0.20"
"F" - Bottom Of Socket To Opposite Face - ANSI B16.11 Half CouplingsFor Size
1/8" And 1/4"
± 0.03"
3/8", 1/2" And 3/4"± 0.06"
1", 1-1/4", 1-1/2" And 2"± 0.08"
2-1/2", 3", And 4"± 0.10"
"G" - Gap Of WeldingApprox. 0.06"
Before Welding Recommended Gap
"H" - Min. FlatMin. Flat = 0.75 X Min.
Socket Wall Thick.


Types Of ASME B16.11 SW Cross For Sale In India


1/3 Inch, 9000#, Stainless Steel Socket Weld Cross

1/3 Inch, 9000#, Stainless Steel Socket Weld Cross

2 Inch, ASME B16.11, 150 LB, Socket Weld Cross

2 Inch, ASME B16.11, 150 LB, Socket Weld Cross

DN25, CL3000, ASTM A182, Forged Steel Pipe Crosses

DN25, CL3000, ASTM A182, Forged Steel Pipe Crosses

2×2 Inch, SW, 6000# ASME B16.11 Cross

2×2 Inch, SW, 6000# ASME B16.11 Cross


2 Inch, ASME B16.11, Class 6000, Forged Socket Weld Equal Crosses

2 Inch, ASME B16.11, Class 6000, Forged Socket Weld Equal Crosses

3 Inch, ASTM A105, 3000 LB, Socket Weld Equal Cross

3 Inch, ASTM A105, 3000 LB, Socket Weld Equal Cross

2×3 Inch, A182, 3000LB, Stainless Steel Socket Weld Cross

2×3 Inch, A182, 3000LB, Stainless Steel Socket Weld Cross

3/4 Inch, ASTM A105, ANSI B16.11 SW Cross

3/4 Inch, ASTM A105, ANSI B16.11 SW Cross


2 X 1/2 Inch, ASTM A182 SS, Class 3000 SW Cross

2 X 1/2 Inch, ASTM A182 SS, Class 3000 SW Cross

2 × 2 Inch, ASTM A105N, 2000 LB, Carbon Steel SW Cross

2 × 2 Inch, ASTM A105N, 2000 LB, Carbon Steel SW Cross



About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Rajtilak Metal © 2021 All Right Reserved. Website Designed And SEO by Mesotek
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy