Socket Weld 90 Degree Elbow
We Provide Stainless Steel Socket Weld 90 Degree Elbow With Good Quality.
What Is Socket Weld 90 Degree Elbow
ASME B16.11 Socket Weld 90 Degree Elbow is a socket weld elbow where the sw stands for socket weld and the angle of directional change is 90 degrees. 90 Degree Socket Weld Elbow differ according to classes and standards but these are usually used with smaller sized pipes up to 4 inches. The nominal size up to 4 inches is governed by B16.11 standards as in the Asme B16.11 Socket Weld 90 Degree Elbow. Any Socket Weld 90 Elbow has sockets or recessions at each end to engulf the connecting pipes. B16.11 Socket Weld Elbow 90 Degree changes the direction of fluid flow perpendicularly. The denotation Elbow 90 Sw 3000 means the particular elbow belongs to the pressure class 3000. The socket weld elbow can be denoted as Elbow 90 Deg Sw as well.
90 Degree Socket Weld Elbow
ASME B16.11 SW 90 Degree Elbow
Table of contents
- ASME B16.11 Socket Weld 90 Degree Elbow Used In High-Pressure Systems?
- 90 Deg SW Elbow Weight Chart According to ASME B16.11
- ANSI B16.11 SW 90 Degree Elbow Material Specification
- Socket Weld 90 Degree Elbow Dimensions
- Class 3000 Forged Socket Weld Elbow 90 Degree Dimensions
- Class 6000 Elbow 90 Deg SW Dimensions In Inch
- Stainless Steel Socket Weld 90 Deg Elbow Temperature Ratings
- Elbow 90 Deg 3000LB Tolerance Formula
- Different Type Of ASME B16.11 Socket Weld 90 Deg Elbow
ASME B16.11 Socket Weld 90 Degree Elbow Used In High-Pressure Systems?
90 Degree Socket Elbow could be made up of different materials but the carbon steel ones are common. The Asme B16.11 90 Degree Elbow makes an abrupt turn in the fluid flow direction and therefore the pressure containment of 90 Degree Sw Elbow must be concerned before applying it onto a high pressure system. Forged Socket Weld Elbow 90 Degree is stronger and can be used in high pressure systems as well. The Socket Weld Long Radius 90 Degree Elbows have a radius longer than 1.5 times the diameter of the pipe. These can be made in stainless steel and the Stainless Steel Socket Weld 90 Deg. Elbow is stronger due to the strength of the making material.
Most Reliable Manufacturer Of Class 3000 Carbon Steel Socket Weld 90 Deg Elbow In India.
90 Deg SW Elbow Weight Chart According to ASME B16.11
| Normal Pipe Sizes | A | B | QTY | Weight In KG |
|---|---|---|---|---|
| ¼ | 0.81 | 0.88 | 160 | 0.20 |
| ⁄ | 0.97 | 1.00 | 130 | 0.26 |
| ½ | 1.12 | 1.31 | 100 | 0.57 |
| ¾ | 1.31 | 1.5 | 75 | 0.71 |
| 1 | 1.5 | 1.81 | 40 | 1.08 |
| 1 ¼ | 1.75 | 2.19 | 25 | 1.68 |
| 1 ½ | 2.00 | 2.44 | 18 | 2.38 |
| 2 | 2.38 | 2.97 | 10 | 3.55 |
| 2 ½ | 3.00 | 3.62 | 4 | 6.22 |
| 3 | 3.38 | 4.31 | 2 | 10.36 |
| 4 | 4.19 | 5.75 | 1 | 23.91 |
Biggest Class 6000 Forged SW 90 Degree Elbow Manufacturer In India And Socket Weld Short Radius 90° Elbows Pressure Rating.
ANSI B16.11 SW 90 Degree Elbow Material Specification
| Specification : | ASME B16.11 Socket Weld 90 Deg Elbow |
|---|---|
| Standards | ASME B16.11, Bs3799, MSS SP 79, JIS B2302, MSS SP 95, MSS SP 83 |
| Size | Socket Weld Fittings = ½” – 8” |
| ASME B16.11 Tolerance : | 0.06 inches (1.6 millimeter) |
| Minimum Wall Thickness: | 12.5%, minimum wall thickness |
| Finishing: | Carbon Steel : Gavlvanized Or Black Stainless Steel : Pickled |
| Schedule | 3000 - Schedule 80/XS, 6000 - Schedule 160, 9000 Schedule XXS. |
| Pressure Rating : | Socket Weld Fittings = 2000LB, 3000LB, 6000LB |
| Types : | 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee, Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple. |
| MSS SP-95 : | Bull Plugs & Swage(d) Nipples |
| Threaded : | No Threaded |
| Material : | Stainless Steel, Carbon Steel, Inconel, Hastelloy, Copper Nickel, Cast Iron, Alloy Steel, Mild Steel, Duplex Steel & Super Duplex Steel, Wrought Iron. |
The shorter version which has a radius of less than 1.5 times the nominal size is the 90° Short Radius Socket Weld Elbow. To add to the strength, the Ansi B16.9 90 Deg Forged Socket Weld Elbow is forged at production. And the Asme B16.9 90 Deg Socket Weld Elbow has a 90 degree angle of directional change and belongs to a different standard which governs the nominal sizes up to 48 inches. The pressure denotations such as the 90 Degree Elbow 3000lb Socket Weld indicate the pressure levels that an elbow could withstand.
Socket Weld 90 Degree Elbow Dimensions
Standard Specification Of Forged Socket Weld Elbow 90 Deg, ASME B16.11 SW 90 Degree Elbow Size Chart.
Class 3000 Forged Socket Weld Elbow 90 Degree Dimensions
Normal Pipe Sizes - 1/2 To 4
| Normal Pipe Sizes | Socket Bore |
Depth Socket |
Bore DIA |
Socket Weight |
Body Weight |
| B | J | D | C | G | |
| 1/2 | 21.95 21.70 |
10 | 16.6 15 |
4.65 4.10 |
3.75 |
| 3/4 | 27.30 27.05 |
13 | 21.7 20.2 |
4.90 4.25 |
3.90 |
| 1 | 34.05 33.80 |
13 | 27.4 25.9 |
5.70 5.00 |
4.55 |
| 1.1/4 | 42.80 42.55 |
13 | 35.8 34.3 |
6.05 5.30 |
4.85 |
| 1.1/2 | 48.90 48.65 |
13 | 41.7 40.1 |
6.35 5.55 |
5.10 |
| 2 | 61.35 61.10 |
16 | 53.5 51.7 |
6.95 6.05 |
5.55 |
| 2.1/2 | 74.20 73.80 |
16 | 64.2 61.2 |
8.75 7.65 |
7.00 |
| 3 | 90.15 89.80 |
16 | 79.5 46.4 |
9.50 8.30 |
7.60 |
| 4 | 115.80 115.45 |
19 | 103.8 100.7 |
10.70 9.35 |
8.55 |
Class 6000 Elbow 90 Deg SW Dimensions In Inch
Normal Pipe Sizes - 1/2 To 2
| Normal Pipe Sizes | Socket Bore |
Depth Socket |
Bore DIA |
Socket Weight |
Body Weight |
| B | J | D | C | G | |
| 1/2 | 21.95 21.70 |
10 | 12.5 11 |
5.95 5.20 |
4.80 |
| 3/4 | 27.30 27.05 |
13 | 16.3 14.8 |
6.95 6.05 |
5.55 |
| 1 | 34.05 33.80 |
13 | 21.5 19.9 |
7.90 6.95 |
6.35 |
| 1.1/4 | 42.80 42.55 |
13 | 30.2 28.7 |
7.90 6.95 |
6.35 |
| 1.1/2 | 48.90 48.65 |
13 | 34.7 33.2 |
8.90 7.80 |
7.15 |
| 2 | 61.35 61.10 |
16 | 43.6 42.1 |
10.90 9.50 |
8.75 |
We Provide ANSI B16.9 90 Deg Forged Socket Weld Elbow 3rd Party Testing And 90 Degree Sw Elbow Expert Cutting Service In Mumbai, India.
Stainless Steel Socket Weld 90 Deg Elbow Temperature Ratings
Elbow 90 Deg 3000LB Tolerance Formula
| ANSI B16.11 American Standard Dimensional Tolerances | ||
|---|---|---|
| "A" - Socket Center To Bottom | For Size 1/8" And 1/4" | ± 0.03" |
| 3/8", 1/2" And 3/4" | ± 0.06" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.08" | |
| 2-1/2", 3", And 4" | ± 0.10" | |
| "B" - Socket Bore Diameter | For Size 1-1/2" And Smaller | + 0.020" - 0.000" |
| 2", 2-1/2", 3" And 4" | + 0.025" - 0.000" | |
| "C" - Socket Wall Thick. | Min. = 1.09 T (But Not Less Than 5/32") T = Wall Thickness Of Nominal Pipe Sizes | |
| "D" - Bore Diameter Of Pipe Fitting | For Size 2" And Smaller | ± 0.030" |
| 2-1/2", 3" And 4" | ± 0.060" | |
| "E" - Sockets- Bottom To Bottom - Full Couplings | For Size 1/8" And 1/4" | ± 0.06" |
| 3/8", 1/2" And 3/4" | ± 0.12" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.16" | |
| 2-1/2", 3", And 4" | ± 0.20" | |
| "F" - Bottom Of Socket To Opposite Face - ANSI B16.11 Half Couplings | For Size 1/8" And 1/4" | ± 0.03" |
| 3/8", 1/2" And 3/4" | ± 0.06" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.08" | |
| 2-1/2", 3", And 4" | ± 0.10" | |
| "G" - Gap Of Welding | Approx. 0.06" Before Welding Recommended Gap | |
| "H" - Min. Flat | Min. Flat = 0.75 X Min. Socket Wall Thick. | |
Different Type Of ASME B16.11 Socket Weld 90 Deg Elbow
4/5 Inch, SW, Class 6000, Socket Weld 90 Degree Elbow
2/3 Inch, 3000 LB, High Pressure, Socket Weld ASME B16.11 Elbow
3 Inch, SW, Class 3000, 90 Degree Socket Weld Elbow
DN80, B16.11, PN400, Stainless Steel Socket Weld 90 Deg Elbow
2 Inch, CL6000, CS ASTM A105, Socket Weld LR 90 Degree Elbows
CL150, SW Ends, ASTM A197, 90° Short Radius Socket Weld Elbow
DN20, ASTM A350, ANSI B16.9 90 Deg Forged Socket Weld Elbow
3 Inch, ASTM A105, CL3000, ASME B16.9 90 Deg Socket Weld Elbows
4 Inch, ANSI B16.11, Galvanized, Socket Weld 90 Deg Elbows
1.5 Inch, 6000LB, ASTM A105, Socket Weld 90 Deg Elbows
1/2 Inch, ASTM A182 F316, ANSI B16.9 9000lb SW 90 Deg Elbows
