Socket Weld 45 Degree Elbow
Rajtilak Metal Are Largest Independent ASME B16.11 Stainless Steel Socket Weld 45 Degree Elbow Manufacturer In India.
What Is Socket Weld 45 Degree Elbow?
Socket Weld 45 Degree Elbow is a type of elbow that has a socket on each end. The socket weld has a recessed part into which the pipe will fit. These are usually used with smaller sized pipes. The Asme B16.11 Elbow belongs to the standard that governs the nominal sizes up to 4 inches. B16.11 Elbow is used to connect the pipes often permanently. The Asme B16.11 Elbow Dimensions depend on the application requirements. Ansi B16.11 SW 45 Deg Elbow can be with a short radius or a long radius. Street Elbow Asme B16.11 can also be of different Forged Elbow Dimensions and materials. Carbon Steel 45 Degree Sw Elbow is the most commonly used type of material but the degrees of curvature can vary.
Socket Weld 45 Degree Elbow
Stainless Steel Forged Socket Weld Elbow
Table of contents
- What Use Of The 45 Degree Socket Weld Elbow?
- What Nominal Size Range Of SW 45 Deg Elbow?
- ASME B16.11 Forged Elbow Standard Specification
- Socket Weld 45° Elbow Dimensions
- Class 3000 Socket Weld 45 Degree Elbow Dimensions
- Class 6000 Socket Weld 45 Degree Elbow Dimensions
- 45° Socket Weld Elbow Pressure Rating
- ANSI B16.9 Forged Socket Weld 45 Deg Elbow Weight Chart
- ASME B16.9 45 Deg Socket Weld Elbow Tolerances Chart
- Types Of 45 Degree Socket Weld Elbow For Sale
What Use Of The 45 Degree Socket Weld Elbow?
The 45 Degree Socket Weld Elbow means the socket weld elbow has a change of direction by 45 degrees. The B16.11 Socket Weld 45 Elbow is used to change the direction horizontally with an angle. Two 45 Degree Socket Weld Elbow fittings could be used in distance to make a 90 degree turn and four of them could be used to make a reversal of direction without having the entire pressure and stress focused in one joint of the piping.
What Nominal Size Range Of SW 45 Deg Elbow?
Stainless Steel Socket Weld 45 Deg Elbow is stronger and the Forged Socket Weld Elbow 45 Degree has added strength due to the forging during production. Socket Weld Long Radius 45 Degree Elbows have a longer curvature, usually longer than 1.5 times the diameter. 45° Short Radius Socket Weld Elbow has a shorter radius, usually less than 1.5 times the nominal size. Ansi B16.9 45 Deg Forged Socket Weld Elbow belongs to a different standard where theAsme B16.9 45 Deg Socket Weld Elbow nominal size ranges from ½ inches to 48 inches. 45 Degree Elbow 3000lb Socket Weld indicates the pressure containment capacity. The 45° Socket Weld Elbow can be purchased in different pressure containment capacities and classes as well.
Check Stainless Steel SW 45 Deg Elbow Weight Chart And Carbon Steel Socket Weld 45 Degree Elbows Size Chart.
ASME B16.11 Forged Elbow Standard Specification
| Specification : | ASME B16.11 Socket Weld 45 Degree Elbow |
|---|---|
| MSS SP-95 : | Bull Plugs & Swage(d) Nipples |
| Threaded : | No Threaded |
| Material : | Stainless Steel, Carbon Steel, Inconel, Hastelloy, Copper Nickel, Cast Iron, Alloy Steel, Mild Steel, Duplex Steel & Super Duplex Steel, Wrought Iron. |
| ASME B16.11 Tolerance : | 0.06 inches (1.6 millimeter) |
| ANSI B16.11 Standards | ASME B16.11, Bs3799, MSS SP 79, JIS B2302, MSS SP 95, MSS SP 83 |
| ANSI B16.11 Size | Socket Weld Fittings = ½” – 8” |
| ANSI B16.11 Pressure Rating : | Socket Weld Fittings = 2000LB, 3000LB, 6000LB |
| ANSI B16.11 Types : | Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee, 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple. |
| ANSI B16.11 Minimum Wall Thickness: | 12.5%, minimum wall thickness |
| Finishing: | Carbon Steel : Gavlvanized Or Black Stainless Steel : Pickled |
| ANSI B16.11 Schedule | 3000 - Schedule 80/XS, 6000 - Schedule 160, 9000 Schedule XXS. |
Get ANSI B16.11 45 Deg Forged Long Radius Socket Weld Elbow Best Price And Fast Delivery In India.
Socket Weld 45° Elbow Dimensions
View 45 Degree Socket Weld Elbow Dimensions
Class 3000 Socket Weld 45 Degree Elbow Dimensions
Normal Pipe Sizes 1/2 To 4
| Normal Pipe Sizes | Socket Bore |
Depth Socket |
Bore Dia. |
Thickness Of Socket Wall |
Thickness Of Body Wall |
Center to bottom of socket A |
|
| B | J | D | C | G | 45 Deg | ||
| 1/2 | 21.95 21.70 |
10 | 16.6 15 |
4.65 4.10 |
3.75 | 11.5 | |
| 3/4 | 27.30 27.05 |
13 | 21.7 20.2 |
4.90 4.25 |
3.90 | 12.5 | |
| 1 | 34.05 33.80 |
13 | 27.4 25.9 |
5.70 5.00 |
4.55 | 14 | |
| 1¼ | 42.80 42.55 |
13 | 35.8 34.3 |
6.05 5.30 |
4.85 | 17 | |
| 1½ | 48.90 48.65 |
13 | 41.7 40.1 |
6.35 5.55 |
5.10 | 21 | |
| 2 | 61.35 61.10 |
16 | 53.5 51.7 |
6.95 6.05 |
5.55 | 25 | |
| 2½ | 74.20 73.80 |
16 | 64.2 61.2 |
8.75 7.65 |
7.00 | 29 | |
| 3 | 90.15 89.80 |
16 | 79.5 46.4 |
9.50 8.30 |
7.60 | 31.5 | |
| 4 | 115.80 115.45 |
19 | 103.8 100.7 |
10.70 9.35 |
8.55 | 41.5 | |
Class 6000 Socket Weld 45 Degree Elbow Dimensions
Normal Pipe Sizes 1/2 To 2
| Normal Pipe Sizes | Socket Bore |
Depth Socket |
Bore Dia. |
Thickness Of Socket Wall |
Thickness Of Body Wall |
Center to bottom of socket A |
| B | J | D | C | G | 45° | |
| 1/2 | 21.95 21.70 |
10 | 12.5 11 |
5.95 5.20 |
4.80 | 12.5 |
| 3/4 | 27.30 27.05 |
13 | 16.3 14.8 |
6.95 6.05 |
5.55 | 14.5 |
| 1 | 34.05 33.80 |
13 | 21.5 19.9 |
7.90 6.95 |
6.35 | 17 |
| 1¼ | 42.80 42.55 |
13 | 30.2 28.7 |
7.90 6.95 |
6.35 | 21 |
| 1½ | 48.90 48.65 |
13 | 34.7 33.2 |
8.90 7.80 |
7.15 | 25 |
| 2 | 61.35 61.10 |
16 | 43.6 42.1 |
10.90 9.50 |
8.75 | 29 |
45° Socket Weld Elbow Pressure Rating
ANSI B16.9 Forged Socket Weld 45 Deg Elbow Weight Chart
| Normal Pipe Sizes | A | B | QTY | Weight In KG |
|---|---|---|---|---|
| ¼ | 0.81 | 0.88 | 160 | 0.20 |
| ⁄ | 0.97 | 1.00 | 130 | 0.26 |
| ½ | 1.12 | 1.31 | 100 | 0.57 |
| ¾ | 1.31 | 1.5 | 75 | 0.71 |
| 1 | 1.5 | 1.81 | 40 | 1.08 |
| 1 ¼ | 1.75 | 2.19 | 25 | 1.68 |
| 1 ½ | 2.00 | 2.44 | 18 | 2.38 |
| 2 | 2.38 | 2.97 | 10 | 3.55 |
| 2 ½ | 3.00 | 3.62 | 4 | 6.22 |
| 3 | 3.38 | 4.31 | 2 | 10.36 |
| 4 | 4.19 | 5.75 | 1 | 23.91 |
ASME B16.9 45 Deg Socket Weld Elbow Tolerances Chart
| ANSI B16.11 American Standard Dimensional Tolerances | ||
|---|---|---|
| "A" - Socket Center To Bottom | For Size 1/8" And 1/4" | ± 0.03" |
| 3/8", 1/2" And 3/4" | ± 0.06" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.08" | |
| 2-1/2", 3", And 4" | ± 0.10" | |
| "B" - Socket Bore Diameter | For Size 1-1/2" And Smaller | + 0.020" - 0.000" |
| 2", 2-1/2", 3" And 4" | + 0.025" - 0.000" | |
| "C" - Socket Wall Thick. | Min. = 1.09 T (But Not Less Than 5/32") T = Wall Thickness Of Nominal Pipe Sizes | |
| "D" - Bore Diameter Of Pipe Fitting | For Size 2" And Smaller | ± 0.030" |
| 2-1/2", 3" And 4" | ± 0.060" | |
| "E" - Sockets- Bottom To Bottom - Full Couplings | For Size 1/8" And 1/4" | ± 0.06" |
| 3/8", 1/2" And 3/4" | ± 0.12" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.16" | |
| 2-1/2", 3", And 4" | ± 0.20" | |
| "F" - Bottom Of Socket To Opposite Face - ANSI B16.11 Half Couplings | For Size 1/8" And 1/4" | ± 0.03" |
| 3/8", 1/2" And 3/4" | ± 0.06" | |
| 1", 1-1/4", 1-1/2" And 2" | ± 0.08" | |
| 2-1/2", 3", And 4" | ± 0.10" | |
| "G" - Gap Of Welding | Approx. 0.06" Before Welding Recommended Gap | |
| "H" - Min. Flat | Min. Flat = 0.75 X Min. Socket Wall Thick. | |
Types Of 45 Degree Socket Weld Elbow For Sale
A351 CF8M, 1 1/2 Inch, ANSI B16.11 Class 3000 SW Elbow
1 Inch, ASME B16.11, A182 F11, Class 6000 SW Elbow
3000#, 1 1/2 Inch, ASME B16.11, SW, A105, ASME B16.9 45 Deg Socket Weld Elbow
1/2 Inch, 3000lb, ASTM A182 F304L, Stainless Steel Socket Weld 45 Deg Elbow
1 1/2 Inch, 150 LB, ANSI B16.11, SW, 45° SR SW Elbows
2 Inch, ANSI B16.11, Galvanized, Class 6000, 45 Degree Socket Weld Elbows
1.5 Inch, ASTM A105, Carbon Steel 45 Degree SW Elbows
ASTM A182 F316, 1/2 Inch, Socket Weld 9000lb Elbow
1/2 Inch, F304H, 3000LB, Socket Weld 45 Degree Elbows
Class 6000, 3/4 Inch, 45 Degree Socket Weld Elbow
High Pressure, 1/2 Inch, 3000 LB, ASME B16.11 Elbows
