Alloy Steel Pipe Fittings manufacturer in India
Refer Low Alloy Buttweld Fitting Price List and AS Elbow/ Tee Specifications.
Alloy Steel Pipe Fittings Manufacturer In India
Alloy Steel Buttweld Fittings
Low Alloy Steel Weld Fittings
Table Of Contents
- Alloy Steel Buttweld Fittings Use For Low Cost Applications?
- Low Alloy Steel Fittings Price List
- AS Fittings Specifications
- Alloy Steel Pipe Fittings Chemical Composition
- SAE AS Fittings of Mechanical properties
- Alloy Steel Fittings Dimensions Chart
- High Alloy Steel Fittings Weight Chart
- AS Hydraulic Fittings Pressure Rating
- Alloy Steel Pipe Fittings Tolerance Chart
- AS 1653 Fittings Gasket Size Chart
- Wide Stockist Types Of Alloy Steel Fittings
Alloy Steel Fittings Connect Different Piece In Piping?
Alloy Steel Pipe Fittings are parts of the piping products that are made up of alloy steel and connect different pieces of piping together. They could either connect two or more pipes or, sometimes two different fittings themselves. As an Alloy Steel Fittings manufacturer, Rajtilak Metal is a leading firm to produce and supply alloy steel fittings.
Alloy Steel Buttweld Fittings Use For Low Cost Applications?
The low pressure and low cost applications can suffice low cost and low capacity material fittings whereas high pressure and high cost applications such as aerospace piping need much specific fittings. To address the strength needs, the Alloy Steel Weld Fittings manufacturers produce welded fittings like welded sockets and others. This provides an advantage in piping to make sure the bending stress, fluid flow pressure and other conditions are met accordingly. There are standards such as the NPT, BSP, IBR and ASME which govern different aspects of the pipe fittings. For example, the Ibr Alloy Steel Pipe Fittings has to adhere to the Indian Boilers Regulations.
| Low Alloy Steel Fittings Price List | |||||
|---|---|---|---|---|---|
| Type Of Fittings | Size | Material | Grade | Price In India (INR) | |
| 45 Deg Elbow | 6" X SCH 40 | Alloy Steel | ASTM A182 WP5 | 490.00 | |
| 45 Deg Elbow | 8" X SCH 40 | Alloy Steel | ASTM A182 WP5 | 1030.00 | |
| 45 Deg Elbow | 10" X SCH 40 | Alloy Steel | ASTM A182 WP5 | 2100.00 | |
| 90 Deg Elbow | 2" X SCH 40 | Alloy Steel | ASTM A182 WP9 | 125.00 | |
| 90 Deg Elbow | 3" X SCH 40 | Alloy Steel | ASTM A182 WP9 | 200.00 | |
| 90 Deg Elbow | 4" X SCH 40 | Alloy Steel | ASTM A182 WP9 | 299.00 | |
| 90 Deg Elbow | 6" X SCH 40 | Alloy Steel | ASTM A182 WP9 | 780.00 | |
| Equal Tee | 3/4" X 40 | Alloy Steel | ASTM A182 WP11 | 95.00 | |
| Equal Tee | 1/2" X 40 | Alloy Steel | ASTM A182 WP11 | 65.00 | |
| Equal Tee | 2" X 40 | Alloy Steel | ASTM A182 WP11 | 200.00 | |
| Concentric Reducer | 3/4 X 1/2" X SCH 160 | Alloy Steel | ASTM A182 WP5 | 60.00 | |
| Concentric Reducer | 1 X 1/2" X SCH 160 | Alloy Steel | ASTM A182 WP5 | 88.99 | |
| Concentric Reducer | 4 X 2 X SCH 80" X SCH 160 | Alloy Steel | ASTM A182 WP5 | 350.00 | |
Please note this is an approx Price of Alloy Steel Pipe Fittings in India. For final AS Fittings Price List Please Call on 91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.
Standard Specification of Alloy Steel Pipe Bend and AS End Cap, Reducer Weight Chart according to ASME B16.9.
AS Fittings Specifications
| Specification: | Alloy Steel Pipe Fittings |
| Standard | EN, ISO, DIN, JIS, NPT |
| Type | Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross, |
| Connection Type | Threaded/ Clamp End / End Bell / Weld/ Flange/ |
| Pressure-Temperature Class | 150LB, 300LB, 600LB, 1500LB, 2500LB. |
| Schedule: | Schedule 5 TO Schedule XXS. |
| Size: | Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48” |
| Type: | Butt Weld (BW), Seamless (SMLS) Welded |
| Thickness: | Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc. |
| Type Of Dimension: | BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313 |
Alloy Steel Pipe Fittings Chemical Composition
WPB B,C,D,E, |
WPC C,D,E, | ASTM A234 WP11 CL1 | A234 WP11 CL2, | A234 WP11 CL3 | ASTM A234 WP22 CL1 | A234 WP22 CL3 | ASTM A234 WP5 CL1, | A234 WP5 CL3 | |
|---|---|---|---|---|---|---|---|---|---|
| Carbon | 0.3 | 0.35 | 0.05–0.15 | 0.05–0.20 | 0.05–0.20 | 0.05–0.15 | 0.05–0.15 | 0.15 | 0.15 |
| Manganese | 0.29–1.06 | 0.29–1.06 | 0.30–0.60 | 0.30–0.80 | 0.30–0.80 | 0.30–0.60 | 0.30–0.60 | 0.30–0.60 | 0.30–0.60 |
| Phosporus | 0.05 | 0.05 | 0.03 | 0.04 | 0.04 | 0.04 | 0.04 | 0.04 | 0.04 |
| Sulfur | 0.058 | 0.058 | 0.03 | 0.04 | 0.04 | 0.04 | 0.04 | 0.03 | 0.03 |
| Silicon | 0.10 minimum | 0.10 minimum | 0.50–1.00 | 0.50–1.00 | 0.50–1.00 | 0.5 | 0.5 | 0.5 | 0.5 |
| Chromium | 0.4 | 0.4 | 1.00–1.50 | 1.00–1.50 | 1.00–1.50 | 1.90–2.60 | 1.90–2.60 | 4.0–6.0 | 4.0–6.0 |
| Molybdenum | 0.15 maximum | 0.15 maximum | 0.44–0.65 | 0.44–0.65 | 0.44–0.65 | 0.87–1.13 | 0.87–1.13 | 0.44–0.65 | 0.44–0.65 |
| Nickel | 0.4 | 0.4 | … | … | … | … | … | … | … |
| Copper | 0.4 | 0.4 | … | … | … | … | … | … | … |
| Others | Vanadium 0.08 | Vanadium 0.08 | … | … | … | … | … | … | … |
SAE AS Fittings of Mechanical properties
| Gr. | Tensile Strength, minimum ksi[MPa] | Yield Strength, minimum ksi[MPa] | Elongation, minimum % | |
| Longitudinal | Transverse | |||
| ASTM A234 WP1 | 55-80[380-550] | 30[205] | 20 | 13 |
| ASTM A234 WP12 CL1 | 60[415] | 32[220] | 22 | 14 |
| ASTM A234 WP12 CL2 | 70[485] | 40[275] | 22 | 14 |
| ASTM A234 WP11 CL1 | 60[415] | 30[205] | 22 | 14 |
| A234 WP11 CL2 | 70[485] | 40[275] | 22 | 14 |
| A234 WP11 CL3 | 75[520] | 45[310] | 22 | 14 |
| A234 WP22 CL1 | 60[415] | 30[205] | 22 | 14 |
| A234 WP22 CL3 | 75[520] | 45[310] | 22 | 14 |
| A234 WP24 | 85[585] | 60[415] | 20 | - |
| A234 WP5 CL1 | 60[415] | 30[205] | 22 | 14 |
| A234 WP5 CL3 | 75[520] | 45[310] | 22 | 14 |
| ASME SA234 WP9 CL1 | 60[415] | 30[205] | 22 | 14 |
| ASME SA234 WP9 CL3 | 75[520] | 45[310] | 22 | 14 |
| ASME SA234 WPR | 63-99[435-605] | 46[315] | 20 | - |
| ASME SA234 WP91 | 90[620] | 60[415] | 20 | 13 |
| ASME SA234 WP911 | 90-120[620-840] | 64[440] | 20 | 13 |
| ASME SA234 WP92 | 90-120[620-840] | 64[440] | 20 | 13 |
Alloy steel pipe fittings are used in all applications where alloy steel pipes are used. Industries such as aerospace, underwater testing, chemical processing plants, power generation plants, heat exchangers, water supply lines, oil and gas industry, food processing plants, pharmaceutical productions and others. Buy large or small quantity Of 4130 (Chromoly) Annealed Alloy Steel Compression Fittings at Factory Price In India, We're one of the nation's largest distributor of 4130 Chromoly AS Fittings Aerospace.
Alloy Steel Fittings Dimensions Chart
| NPS | O.D. | 90 Degree Elbow | 45 Degree Elbow | 180 Degree Return | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter) | (inch) | Center to Face (inch) |
Center to Face (inch) |
Center to Face (inch) |
Radius (inch) |
Center to Center (inch) |
Back to face (inch) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| NPS | O.D. | Pipe End Caps | Straight Tee | Straight Cross | Long / Short Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inch.) | (millimeter) | (inch.) | Length (inch.) |
Center to End (inch.) |
Center to End (inch.) |
Lap Diameter (inch.) |
Long Length (inch.) |
Short Length (inch.) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Wide Inventory Of Alloy Steel Weld Fittings And Check Sae AS Fittings Pressure Rating Chart.
High Alloy Steel Fittings Weight Chart
|
DN (Normal Pipe Sizes) |
Sch 10S |
Sch 40S |
Sch 80S | ||||||
|
90 Deg Elbow | 45 Deg Elbow | Equal Pipe tee |
90 Deg Elbow | 45 Deg Elbow |
Equal Pipe tee | 90 Deg Elbow | 45 Deg Elbow |
Equal Pipe Tee | |
|
8 |
0.02 |
0.01 |
0.03 |
0.03 |
0.02 |
0.06 |
0.04 |
0.03 |
0.07 |
|
10 |
0.03 |
0.02 |
0.05 |
0.03 |
0.02 |
0.03 |
0.06 |
0.04 |
0.09 |
|
15 |
0.06 |
0.03 |
0.09 |
0.08 |
0.04 |
0.10 |
0.10 |
0.05 |
0.14 |
|
20 |
0.07 |
0.03 |
0.13 |
0.08 |
0.04 |
0.17 |
0.11 |
0.05 |
0.20 |
|
25 |
0.14 |
0.08 |
0.28 |
0.15 |
0.11 |
0.29 |
0.22 |
0.14 |
0.38 |
|
32 |
0.23 |
0.11 |
0.49 |
0.26 |
0.17 |
0.59 |
0.40 |
0.23 |
0.68 |
|
40 |
0.30 |
0.17 |
0.68 |
0.40 |
0.23 |
0.86 |
0.51 |
0.29 |
1.02 |
|
50 |
0.50 |
0.25 |
0.85 |
0.70 |
0.4 |
1.28 |
0.91 |
0.59 |
1.59 |
|
65 |
0.85 |
0.48 |
1.41 |
1.40 |
0.77 |
2.19 |
1.81 |
0.99 |
3.13 |
|
80 |
1.25 |
0.63 |
1.77 |
2.20 |
1.08 |
3.31 |
2.97 |
1.50 |
4.45 |
|
90 |
1.70 |
0.75 |
2.67 |
2.83 |
1.42 |
4.08 |
4.00 |
2.00 |
5.44 |
|
100 |
2.10 |
1.08 |
3.46 |
4.47 |
2.09 |
5.27 |
6.18 |
2.81 |
7.71 |
|
150 |
5.45 |
2.72 |
8.07 |
10.89 |
5.44 |
10.99 |
16.32 |
8.16 |
13.61 |
|
200 |
10.20 |
5.33 |
15.65 |
21.54 |
10.77 |
20.91 |
33.11 |
16.56 |
28.12 |
|
250 |
18.15 |
9.75 |
26.46 |
38.56 |
19.27 |
35.38 |
51.71 |
25.86 |
49.90 |
|
300 |
25.80 |
13.62 |
39.46 |
59.42 |
29.71 |
62.14 |
79.38 |
39.69 |
83.91 |
|
DN (Normal Pipe Sizes) |
Sch 10S |
Sch 40S |
Sch 80S | ||||||
| Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | |
|
40x.25 |
0.19 |
0.19 |
0.60 |
0.26 |
0.26 |
0.76 |
0.34 |
0.34 |
0.90 |
|
50x25 |
0.28 |
0.28 |
0.73 |
0.40 |
0.40 |
1.10 |
0.54 |
0.54 |
1.37 |
|
50x40 |
0.31 |
0.31 |
0.76 |
0.45 |
0.45 |
1.15 |
0.59 |
0.59 |
1.43 |
|
80x.50 |
0.55 |
0.55 |
1.56 |
1.00 |
1.00 |
2.91 |
1.79 |
1.79 |
3.91 |
|
100x50 |
0.78 |
0.78 |
2.94 |
1.50 |
1.50 |
4.48 |
1.95 |
1.95 |
6.55 |
|
100x80 |
0.87 |
0.87 |
3.04 |
1.74 |
1.74 |
4.64 |
2.33 |
2.33 |
6.79 |
|
150x80 |
1.82 |
1.82 |
6.86 |
3.95 |
3.95 |
9.68 |
5.51 |
5.51 |
11.57 |
|
150x100 |
1.96 |
1.96 |
7.10 |
4.07 |
4.07 |
11.94 |
5.96 |
5.96 |
11.97 |
|
200x100 |
3.01 |
3.01 |
13.46 |
6.55 |
6.55 |
17.98 |
9.23 |
9.23 |
24.18 |
|
200x150 |
3.19 |
3.19 |
14.08 |
6.74 |
6.74 |
18.82 |
10.12 |
10.12 |
25.31 |
Global Alloy Steel Elbow Supplier In Mumbai, India And Tolerance Chart Of AS 1653 Fittings.
AS Hydraulic Fittings Pressure Rating
| Pressure-Temperature ratings for Alloy Steel Pipe Fittings (psig) | |||||
|---|---|---|---|---|---|
| Temperature Ratings | Pressure Class | ||||
| 150 | 300 | ||||
| 1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
| (oF) | (oC) | ||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
| 200 | 93 | 265 | 1785 | 1350 | 910 |
| 250 | 121 | 225 | 1575 | 1200 | 825 |
| 300 | 149 | 185 | 1360 | 1050 | 735 |
| 350 | 177 | 150 | 1150 | 900 | 650 |
| 400 | 204 | - | 935 | 750 | 560 |
| 450 | 232 | - | 725 | 600 | 475 |
| 500 | 260 | - | 510 | 450 | 385 |
| 550 | 288 | - | 300 | 300 | 300 |
Held Wide Stock Of Seamless/ Welded ASTM A234 Alloy Steel Buttweld Pipe Fittings For Connect Pipeline And Alloy Steel Tee Chemical Composition/ Mechanical Properties.
Alloy Steel Pipe Fittings Tolerance Chart
| Alloy Steel Pipe Fittings Tolerance | 90 Degree & 45 Degree Elbows & Tees |
Reducers & Lap Joint Stub End |
Pipe Caps | |||
| Alloy Steel Fittings (Normal Pipe Size) | O. D. at Bevel |
I. D. at End |
Wall Thick. T | Center-to-End Dimension A ,C ,B |
Over-all Length H |
Over-all Length F |
| 1/2 to 2-1/2 | +0.06 | Not less than 87.5% of nominal thickness |
+/- 0.06 | +/- 0.06 | +/- 0.12 | |
| -0.03 | ||||||
| 3 to 3-1/2 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
| 4 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
| 5 to 8 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.25 | |
| 10 to 18 | +0.16 | +/- 0.12 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
| -0.12 | ||||||
| 20 to 24 | +0.25 | +/- 0.19 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
| -0.19 | ||||||
| 26 to 30 | +0.25 | +/- 0.19 | +/- 0.12 | +/- 0.19 | +/- 0.38 | |
| -0.19 | ||||||
| 32 to 48 | +0.25 | +/- 0.19 | +/- 0.19 | +/- 0.19 | +/- 0.38 | |
| -0.19 | ||||||
AS 1653 Fittings Gasket Size Chart
| NPS | Gasket I.D. |
Gasket O.D. (Outsdie Daimeter) | ||||
|---|---|---|---|---|---|---|
| Class 150 | Class 300 | Class 400 | Class 600 | Class 900 | ||
| 1/2 | 0.84 | 1.875 | 2.125 | 2.125 | 2.125 | 2.50 |
| 3/4 | 1.06 | 2.25 | 2.625 | 2.625 | 2.625 | 2.75 |
| 1 | 1.31 | 2.625 | 2.875 | 2.875 | 2.875 | 3.125 |
| 1 1/4 | 1.66 | 3 | 3.25 | 3.25 | 3.25 | 3.50 |
| 1 1/2 | 1.91 | 3.375 | 3.75 | 3.75 | 3.75 | 3.875 |
| 2 | 2.38 | 4.125 | 4.375 | 4.375 | 4.375 | 5.625 |
| 2 1/2 | 2.88 | 4.875 | 5.125 | 5.125 | 5.125 | 6.50 |
| 3 | 3.50 | 5.375 | 5.875 | 5.875 | 5.875 | 6.625 |
| 4 | 4.50 | 6.875 | 7.125 | 7.00 | 7.625 | 8.125 |
| 5 | 5.56 | 7.75 | 8.50 | 8.375 | 9.50 | 9.75 |
| 6 | 6.62 | 8.75 | 9.875 | 9.75 | 10.50 | 11.375 |
| 8 | 8.62 | 11 | 12.125 | 12.00 | 12.625 | 14.125 |
| 10 | 10.75 | 13.375 | 14.25 | 14.125 | 15.75 | 17.125 |
| 12 | 12.75 | 16.125 | 16.625 | 16.50 | 18.00 | 19.625 |
The pipe fittings vary in function, shape, diameter, capacity and many mechanical properties. The Alloy Steel Fittings are produced as caps, plugs, barbs, valves and much more. The Alloy Steel Pipe Fittings Manufacturers In India get raw material either locally or imported and produce different fittings such as the elbows, adapters, couplings, unions and others. We are a leading alloy steel weld fittings manufacturer and produce Alloy Steel Buttweld Fittings as well. Different alloy steels are used in the production. There are high alloys and Low Alloy Steel Fittings; each of them corresponding to specific needs.
Wide Stockist Types Of Alloy Steel Fittings
4 X 2 Inch, SCH 80S, Alloy Steel 45° Elbow
6 Inch X 3 Inch, SCH 80, AS 90° Elbow
6 X 3 Inch, SCH 80, Low Alloy Steel 180° Elbow
12×10 Inch, SCH 80, High Alloy Steel Equal Tee
6 X 4 Inch, SCH 40, Chromium Alloy Steel Concentric Reducer
8 x 6 Inch, Galvanized, Cast Alloy Steel Eccentric Reducer
3 Inch, SCH STD, BW, Chrome Alloy Steel Long Radius Elbow
14 Inch, B16.9, SCH 100, Chromoly Alloy Short Radius Elbow
6 Inch, Butt Weld, Chromoly Steel Alloy End Pipe Cap
24 X 6 Inch, SCH 40, 4130 Alloy Steel Stub End
DN350, SCH 120, 4140 Low Alloy Steel Equal Cross
6 Inch x 4 Inch, Sch 80, 4142 Chromoly Alloy Steel Reducing Tee
10 Inch, SCH40, Scm420 Chromoly Steel Alloy Reducing Cross
6 Inch, BW, Normalized Alloy Steel Piggable Bend
12 Inch, BW, A234 WP, Annealed Alloy Steel Pipe Bends
12 Inch, ASTM A234, SCH 60, Chromoly Lateral Tee
Locations we have supplied recently
| 20 Inch, SCH40, Alloy Steel Pipe Fittings | Bahrain, South Africa, Singapore |
| 12 Inch, ASTM A234, SCH 10S, Alloy Steel Buttweld Fittings | Thailand, France, Europe, Qatar |
| 12 Inch, BW, ASME B16.9, Low AS Fittings | Australia, Philippines, Nigeria, UK |
| 6 Inch, BW, Chromoly 4130 45 Deg Elbow | Hong Kong, Oman, Malaysia, UAE |
| Sch 120, B16.9, 6 Inch x 4 Inch, Alloy Steel Weld Fittings | Malaysia, USA, Finland, Bangladesh |
| 4 Inch, DN350, SCH 30, Alloy Steel Hydraulic Fittings | Chile, Italy, Iran, Singapore |
| SCH 60, 24 X 6 Inch, Normalized AS Tube Fittings | Norway, Malaysia, United Arab Emirates (UAE), Turkey |
| Chromium, 8 Inch, Butt Weld, Alloy Steel Elbow | Indonesia, Belgium, Dammam -KSA, Philippines. |
| SCH 100, 12 Inch, B16.9, Alloy Steel Compression Fittings | Malaysia, Philippines, Canada, Singapore |
| BW, 4 Inch, SCH STD, 4130 Chromoly AS Fittings | UK, Mexico, Egypt, Spain |
| Galvanized, BW, 8 x 6 Inch, Alloy Steel Forged Fittings | Poland, Canada, Ellington -United States, UK |
| SCH 40, Chromoly, 6 X 4 Inch, AS Pipe Fittings | Europe, UAE, United Kingdom -UK, Malaysia |
| ASME B16.9, 12×10 Inch, BW, SCH 80, High AS Fittings | Malaysia, Japan, Europe, Romania |
| 6 X 3 Inch, Scm415 Chromoly, SCH 80, Alloy Steel Tee | Czechia, Malaysia, Germany, Thailand |
| 6 Inch X 3 Inch, Chromoly, SCH 80, Alloy Steel Reducer | Sweden, China, Colombia, Malaysia |
| 4 X 2 Inch, SCH 80S, 4142 Chromoly Fittings | Netherlands, Russia, Dubai, Malaysia |
| SCH 40, SMLS, 6 In, Alloy Steel Pipe Fittings | Saudi Arabia (KSA), Kuwait, South Africa, Brazil |