AISI 4130 Pipe Fittings
Refer UNS G41300 Elbow Material Specification And Alloy Steel 4130 Fittings Schedule Chart.

AISI 4130 Pipe Fittings

WERKSTOFF NR. 1.7218 Reducer

UNS G41300 Elbow
Table Of Contents
- What Is UNS G41300 Elbow?
- What Is Werkstoff Nr. 1.7218 Reducer?
- AISI 4130 Buttweld Fittings Specification
- AISI 4130 Seamless Pipe Fittings Chemical Structure
- Alloy Steel 1.7218 Fittings Mechanical Strength
- EN 25CrMo4 Tee Physical Properties
- SAE 4130 Fittings Equivalent Chart
- AISI 4130 Buttweld Pipe Fittings Dimensions Chart
- AISI 4130 Fittings Weight Chart Table
- AISI 4130 Pipe Fittings Pressure Rating Chart
- JIS G4105 Fittings Tolerance Chart
- Great Price Types Of AISI 4130 Pipe Fittings For Piping Connection
What Is AISI 4130?
Low alloy steel grade SAE-AISI 4130 Pipe Fittings have added contents of both elements chromium and molybdenum as strengthening agents. Apart from acting as strengthening agents, these two elements in the Aisi 4130 Pipe Fittings enhance the good atmospheric corrosion resistance or oxidation resistance a well as increase its tensile strength properties along with demonstrating a good overall combinations of toughness and fatigue strength properties. AISI 4130 Fittings are versatile, therefore used in the agricultural, automotive, and defence industries.

What Is UNS G41300 Elbow?
Tempering is carried out on the AISI 4130 45 degree Elbow to relieve stresses, which occur from the hardening process. Primarily, tempering the AISI 4130 Buttweld Pipe Fittings is done to achieve mechanical properties, which are required for the final application, which in turn is dependent on the client. The actual tempering temperature for the AISI 4130 Reducer would be chosen in such a manner that it meets the required properties. Although in many cases, this will be achieved in a matter of trial and error.
What Is Werkstoff Nr. 1.7218 Reducer?
Since the Low alloy steel 4130 SW Reducer can be readily machined some steps must be taken to obtain optimum machinability. For instance, simple shapes like the AISI 4130 Elbow could be machined after conducting a normalizing treatment. On the other hand, generally more complex structures such as the SAE 4130 low alloy steel Pipe Elbow would require an annealing process. In order to obtain optimum machinability in the AISI 4130 Seamless Pipe Fittings, a coarse pearlitic structure with minimum ferrite content is recommended by us. Weldability of the 4130 annealed steel end cap is considered to be good. Which is why the alloy 4130 aircraft steel concentric reducer can be welded using any commercial or conventional shop practices.
AISI 4130 Buttweld Fittings Specification
Specification: | AISI 4130 Pipe Fittings |
Size: | Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48” |
Type: | Butt Weld (BW) Fittings, Seamless (SMLS) Fittings, Welded Fittings |
Thickness: | Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc. |
Type Of Dimension: | BS1640 Fittings, EN 10253 - 4 Fittings, DIN 2605 Fittings, JIS B2312 Fittings, ANSI B16.9 Fittings, MSS SP-75 Fittings, ANSI B16.28 Fittings, MSS-SP-43 Type A Fittings, MSS-SP-43 Type B Fittings, JIS B2313 Fittings |
Standard | EN, ISO, DIN, JIS, NPT |
Type | Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross, |
Connection Type | Threaded/ Clamp End / End Bell / Weld/ Flange/ |
Pressure-Temperature Class | 150LB, 300LB, 600LB, 1500LB, 2500LB. |
Schedule: | Schedule 5 TO Schedule XXS. |
Check AISI 4130 Fittings Chemical Composition And AISI 4130 Tee Mechanical Properties.
AISI 4130 Seamless Pipe Fittings Chemical Structure
Gr | C | Mn | Si | P | S | Fe | Mo | Ni | Cr |
AISI 4130 Pipe Fittings | 0.28-0.33 | 0.40-0.60 | 0.15-0.35 | 0.035 maximum | 0.025 maximum | 97.3-98.22 | 0.15-0.25 | 0.50 maximum | 0.80-1.10 |
Looking For The Best AISI 4130 Buttweld Pipe Fittings Manufacturer In India? Buy From Oldest WERKSTOFF NR. 1.7218 Fittings Supplier In Mumbai.
Alloy Steel 1.7218 Fittings Mechanical Strength
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
0.28 | 2580 | 460 MPa | 560 MPa | 20 % |
EN 25CrMo4 Tee Physical Properties
Properties | Metric | Imperial |
---|---|---|
Density | 7.85 g/cm3 | 0.284 lb/in³ |
Melting point | 1432°C | 2610°F |
View AISI 4130 Seamless Fittings Equivalent Length And Wide Variety Of Bulk AISI 4130 Reducer In India.
SAE 4130 Fittings Equivalent Chart
STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
AISI 4130 Pipe Fittings | G41300 | 1.7218 | – | 25CrMo4 | JIS G4105 | BS 970 | – |
AISI 4130 Buttweld Pipe Fittings Dimensions Chart
NPS | O.D. | 90 Degree Elbow | 45 Degree Elbow | 180 Degree Return | ||||
---|---|---|---|---|---|---|---|---|
(inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
(millimeter) | (inch) | Center to Face (inch) |
Center to Face (inch) |
Center to Face (inch) |
Radius (inch) |
Center to Center (inch) |
Back to face (inch) |
|
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
NPS | O.D. | Pipe End Caps | Straight Tee | Straight Cross | Long / Short Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(inch.) | (millimeter) | (inch.) | Length (inch.) |
Center to End (inch.) |
Center to End (inch.) |
Lap Diameter (inch.) |
Long Length (inch.) |
Short Length (inch.) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
AISI 4130 Fittings Weight Chart Table
DN (Normal Pipe Sizes) |
Sch 10S |
Sch 40S |
Sch 80S | ||||||
90 Deg Elbow | 45 Deg Elbow | Equal Pipe tee |
90 Deg Elbow | 45 Deg Elbow |
Equal Pipe tee | 90 Deg Elbow | 45 Deg Elbow |
Equal Pipe Tee | |
8 |
0.02 |
0.01 |
0.03 |
0.03 |
0.02 |
0.06 |
0.04 |
0.03 |
0.07 |
10 |
0.03 |
0.02 |
0.05 |
0.03 |
0.02 |
0.03 |
0.06 |
0.04 |
0.09 |
15 |
0.06 |
0.03 |
0.09 |
0.08 |
0.04 |
0.10 |
0.10 |
0.05 |
0.14 |
20 |
0.07 |
0.03 |
0.13 |
0.08 |
0.04 |
0.17 |
0.11 |
0.05 |
0.20 |
25 |
0.14 |
0.08 |
0.28 |
0.15 |
0.11 |
0.29 |
0.22 |
0.14 |
0.38 |
32 |
0.23 |
0.11 |
0.49 |
0.26 |
0.17 |
0.59 |
0.40 |
0.23 |
0.68 |
40 |
0.30 |
0.17 |
0.68 |
0.40 |
0.23 |
0.86 |
0.51 |
0.29 |
1.02 |
50 |
0.50 |
0.25 |
0.85 |
0.70 |
0.4 |
1.28 |
0.91 |
0.59 |
1.59 |
65 |
0.85 |
0.48 |
1.41 |
1.40 |
0.77 |
2.19 |
1.81 |
0.99 |
3.13 |
80 |
1.25 |
0.63 |
1.77 |
2.20 |
1.08 |
3.31 |
2.97 |
1.50 |
4.45 |
90 |
1.70 |
0.75 |
2.67 |
2.83 |
1.42 |
4.08 |
4.00 |
2.00 |
5.44 |
100 |
2.10 |
1.08 |
3.46 |
4.47 |
2.09 |
5.27 |
6.18 |
2.81 |
7.71 |
150 |
5.45 |
2.72 |
8.07 |
10.89 |
5.44 |
10.99 |
16.32 |
8.16 |
13.61 |
200 |
10.20 |
5.33 |
15.65 |
21.54 |
10.77 |
20.91 |
33.11 |
16.56 |
28.12 |
250 |
18.15 |
9.75 |
26.46 |
38.56 |
19.27 |
35.38 |
51.71 |
25.86 |
49.90 |
300 |
25.80 |
13.62 |
39.46 |
59.42 |
29.71 |
62.14 |
79.38 |
39.69 |
83.91 |
DN (Normal Pipe Sizes) |
Sch 10S |
Sch 40S |
Sch 80S | ||||||
Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | Con Pipe Reducer | Ecc Pipe Reducer | Reducing/ Unequal Tee | |
40x.25 |
0.19 |
0.19 |
0.60 |
0.26 |
0.26 |
0.76 |
0.34 |
0.34 |
0.90 |
50x25 |
0.28 |
0.28 |
0.73 |
0.40 |
0.40 |
1.10 |
0.54 |
0.54 |
1.37 |
50x40 |
0.31 |
0.31 |
0.76 |
0.45 |
0.45 |
1.15 |
0.59 |
0.59 |
1.43 |
80x.50 |
0.55 |
0.55 |
1.56 |
1.00 |
1.00 |
2.91 |
1.79 |
1.79 |
3.91 |
100x50 |
0.78 |
0.78 |
2.94 |
1.50 |
1.50 |
4.48 |
1.95 |
1.95 |
6.55 |
100x80 |
0.87 |
0.87 |
3.04 |
1.74 |
1.74 |
4.64 |
2.33 |
2.33 |
6.79 |
150x80 |
1.82 |
1.82 |
6.86 |
3.95 |
3.95 |
9.68 |
5.51 |
5.51 |
11.57 |
150x100 |
1.96 |
1.96 |
7.10 |
4.07 |
4.07 |
11.94 |
5.96 |
5.96 |
11.97 |
200x100 |
3.01 |
3.01 |
13.46 |
6.55 |
6.55 |
17.98 |
9.23 |
9.23 |
24.18 |
200x150 |
3.19 |
3.19 |
14.08 |
6.74 |
6.74 |
18.82 |
10.12 |
10.12 |
25.31 |
EN 25CrMo4 End Cap Pressure Rating Chart And Accept All Small And Large Orders Of JIS JIS G4105 Stub End.
AISI 4130 Pipe Fittings Pressure Rating Chart
Pressure-Temperature ratings for AISI 4130 Pipe Fittings (psig) | |||||
---|---|---|---|---|---|
Temperature Ratings | Pressure Class | ||||
150 | 300 | ||||
1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
JIS G4105 Fittings Tolerance Chart
AISI 4130 Pipe Fittings Tolerance | 90 Degree & 45 Degree Elbows & Tees |
Reducers & Lap Joint Stub End |
Pipe Caps | |||
AISI 4130 Fittings (Normal Pipe Size) | O. D. at Bevel |
I. D. at End |
Wall Thick. T | Center-to-End Dimension A ,C ,B |
Over-all Length H |
Over-all Length F |
1/2 to 2-1/2 | +0.06 | Not less than 87.5% of nominal thickness |
+/- 0.06 | +/- 0.06 | +/- 0.12 | |
-0.03 | ||||||
3 to 3-1/2 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
4 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
5 to 8 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.25 | |
10 to 18 | +0.16 | +/- 0.12 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
-0.12 | ||||||
20 to 24 | +0.25 | +/- 0.19 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
-0.19 | ||||||
26 to 30 | +0.25 | +/- 0.19 | +/- 0.12 | +/- 0.19 | +/- 0.38 | |
-0.19 | ||||||
32 to 48 | +0.25 | +/- 0.19 | +/- 0.19 | +/- 0.19 | +/- 0.38 | |
-0.19 |
Great Price Types Of AISI 4130 Pipe Fittings For Piping Connection

6 Inch, SCH 40, Aisi 4130 45° Elbow

DN500, SCH XS, Aisi 4130 90° Elbow

8 x 4 Inch, SCH 40, Aisi 4130 Steel Equal Tee

8 Inch, SCH60, Aisi 4130 Concentric Reducer

SCH 60, 4 Inch, Aisi 4130 Eccentric Reducer

3 Inch, SCH 40, Seamless, Alloy Steel AISI 4130 Long Radius Elbow

2-1/2 Inch, SCH 120, BW, AISI 4130 Seamless Short Radius Elbow

1/2 Inch, SCH 10S, AISI UNS G41300 End Pipe Cap

8 Inch, SCH 100, 4130 Alloy Steel Stub End

SCH 60, 1 Inch, B16.9, Low alloy steel 4130 SW Equal Cross

2 Inch, SCH 40, BW, SAE 4130 low alloy steel Reducing Tee

1/2 Inch, SCH60, Seamless, Alloy Steel AISI 4130 Reducing Cross

SCH XXS, 8 Inch, Black, AISI 4130 Alloy Steel Pipe Bends

3 Inch, SCH 20, Seamless, Alloy Steel AISI 4130 Lateral Tee
AISI 4130 Pipe Fittings Suppliers In India Supplied To Different Industries For Various Purposes
AISI 4130 Fittings | South Africa, Kuwait, Brazil, Saudi Arabia (KSA) |
AISI 4130 Elbow | Nigeria, Australia, Philippines, UK |
UNS G41300 Tee | Malaysia, Hong Kong, Oman, UAE |
Alloy Steel 4130 Fittings | Singapore, Bahrain, South Africa |
WERKSTOFF NR. 1.7218 Reducer | Italy, Iran, Chile, Singapore |
AISI 4130 Fittings | Turkey, Norway, Malaysia, United Arab Emirates (UAE) |
AISI 4130 End Cap | Dammam -KSA, Belgium, Philippines, Indonesia. |
AISI 4130 Buttweld Pipe Fittings | Canada, Malaysia, Philippines, Singapore |
AISI 4130 Welded Fittings | Europe, Romania, Japan, Malaysia |
EN 25CrMo4 Stub End | Colombia, Sweden, China, Malaysia |
JIS JIS G4105 Fittings | Netherlands, Russia, Dubai, Malaysia |
Aisi 4130 Steel Equal Tee | Egypt, UK, Mexico, Spain |