13CRMO4-5 Flanges

13crmo4-5 Weld Neck Flanges Chemical Composition And Mechanical Properties.

13CRMO4-5 Flanges

13CRMO4-5 Flanges

13CRMO4-5 Blind Flanges

13CRMO4-5 Blind Flanges

13CRMO4-5 Weld Neck Flanges

13CRMO4-5 Weld Neck Flanges

Table Of Contents


How Many Yield Strength Properties In 13CRMO4-5 Flanges?

According to standard EN 10028-2, steel grade 13CRMO4-5 Flange offers a yield strength of approx 228 Mpa. As, 4150v chrome moly 13CRMO4-5 plate flanges manufacturers and suppliers, we recommend this metal to our clients because of its heat resistance and pressure resistance properties. That is why, the 4140 chrome moly 13CRMO4-5 spectacle blind flange is used above all other grades in applications such as for manufacturing boilers, pressure vessels as well as for piping systems which are involved in the transportation of hot liquids across. Thanks to a high percentage of elements, chrome and molybdenum in its chemical composition, the 4150 chrome moly steel 13CRMO4-5 forged flanges has a high resistance to both heat and to corrosion as well. Other properties associated with the chrome moly steel 13CRMO4-5 socket weld flange include its good weldability, good cold as well as good hot forming properties.


13CRMO4-5 Flange


EN 10216-2 13crmo4-5 Petrochemical Industries?

At our factory, we supply 4150 chrome moly 13CRMO4-5 screwed pipe flange produced under euro norm standard i.e. EN 10028. In comparison to other steel grades, this material used in the production of chrome moly steel 13CRMO4-5 blind flanges offers excellent performance, especially in those settings with higher than normal temperature resistance. Additionally, these alloy steel 13CRMO4-5 sorf flanges tends to display excellent anti-corrosive properties, thereby making this alloy grade well a suited steel grade for use in sour service environments. Hence, the High alloy steel 13CRMO4-5 is a popular choice with our clients belonging to the oil, petrochemical and gas industries.


13crmo4-5 ASTM Equivalent And ISO Approved EN 10216-2 13crmo4-5 Blind Flanges Manufacturer In India.


13crmo4-5 Chemical Composition

dards Steel Gr.
Chemical Composition %
C: Mn: Si: P: S: Cr: Mo: Ni: V: Ti: Cu: W: Al: N:
PN 15HM
0.11 - 0.18 0.4 - 0.7 0.15 - 0.35 <0.04 <0.04 0.7 - 1.0 0.40 - 0.55 <0.35 - - <0.25 - <0.02 -
EN 13CrMo4-5 - 13 CrMo 4-5 - 13CrMo4-4 - 13 CrMo 4-4 - 1.7335
0.08 - 0.18 0.4 - 1.0 <0.35 <0.025 <0.01 0.70 - 1.15 0.4 - 0.6 - - - <0.30 - - <0.012
ISO 14CrMo4-5 - 14 CrMo 4-5
0.10 - 0.18 0.4 - 0.7 <0.40 <0.025 <0.015 0.80 - 1.15 0.4 - 0.6 - - - - - - -
EN 13CrMoSi5-5 - 13 CrMoSi 5-5 - 1.7336
<0.17 0.40 - 0.65 0.50 - 0.80 <0.015 <0.005 1.00 - 1.50 0.45 - 0.65 <0.3 - - <0.3 - - <0.012
AFNOR 15CD4.05 - 15CD4 - 15 CD 4.05
<0.18 0.4 - 0.8 0.15 - 0.35 <0.035 <0.035 0.8 - 1.2 0.4 - 0.6 <0.3 - - - - - -
GOST 15ChM - 15KhM - 15ХМ
0.11 - 0.18 0.40 - 0.70 0.17 - 0.37 <0.035 <0.035 0.80 - 1.10 0.40 - 0.55 <0.3 <0.05 <0.03 <0.3 <0.2 - <0.2
ASTM A182 Grade F11 class 2 and 3 - SA182 F11 class 2 and 3 - UNS K11572
0.1 - 0.2 0.3 - 0.8 0.5 - 1.0 <0.040 <0.040 1.0 - 1.5 0.44 - 0.65 - - - - - - -
ASTM A182 Grade F12 class 1 - SA182 F12 class 1 - UNS K11562
0.05 - 0.15 0.3 - 0.61 <0.5 <0.045 <0.045 0.8 - 1.25 0.44 - 0.65 - - - - - - -
UNS UNS K12062
<0.20 0.3 - 0.8 <0.6 <0.045 <0.045 0.80 - 1.25 0.44 - 0.65 - - - - - - -

13crmo4-5 Mechanical Properties

Properties  Conditions
T (°C) Treatment
Density (×1000 kg/m3) 7.8 25  
Poisson's Ratio 0.27-0.30 25  
Elastic Modulus (GPa) 190-210 25  
Tensile Strength (Mpa) 515 25 annealed (sheet, strip) more
Yield Strength (Mpa) 275
Elongation (%) 40 
Reduction in Area (%)   

4140 Chrome Moly 13CRMO4-5 Slip On Flanges Material Specification/ Dimensions Chart/ Schedule Chart.


13crmo4-5 Flanges Specification Chart

Material Specification Of : 13CRMO4-5 Flanges
Standard Cover : pressure ratings & temperature ratings, materials, marking, dimensions, weight, tolerances, testing
Contact Faces RTJ (Ring Type Joint), FF (Flat Face), RF (Raised Face), T/G (Tongue And Groove ), M/F (Male And Female)
Size Chart Normal Pipe Size 1/2 to NPS 24"
Thickness Normal Pipe Size ≤ 18
Bore Diameter Normal Pipe ≤ 10
Flanges Standards EN 1092-1, JIS, ASME B16.5, ASME B16.47 type A, UNI, DIN
Pressure Rating Class 150 To Class 2500
High Temperature Above 200°C (400°F) For Class 150 Or Above 400°C (750°F)
Low Temperature Above -29 Degree C (−20°F)
Common Types Of Flanges: Slip On (SORF), Weld Neck (WNRF), Blind (BLRF), Lap Joint (Loose), Threaded (NPT), Socket-Weld (SWRF)
Special Types Of Flanges : Nipoflange, Elboflange, Latroflange, Swivel Flange, Expanding Flange, Reducing Flange, Weldoflange
Marking Standard Name of Manufacturer
Schedule
Type of Flange Facing
Nominal Pipe Size
Pressure Class
ASME B16 Designation
Bolt Type high strength bolts
medium strength bolts
low strength bolts
European Standard Flanges JIS B2220 Flanges (5k to 30k) and KS1503 flanges
Russian-Standard Flanges GOST 12820 / 12821-80, DIN, UNI, EN 1092-1
South African Standard Flanges SANSflanges And SABS flanges
Surface Finish smooth, concentric serrated, stock
Gaskets Types Full Face Gasket
Flat Ring Gasket
Metallic Ring Gakset
Advantages Of Pipe Flange Used to Connect Pipe System
Easy Repair Pipe System
Assembled Without Welding

Accept All Small And Large Orders Of Ally Steel 13CRMO4-5 Flange And 13crmo4-5 EN 10028 Flanges Pressure Rating Class.

En 10222-2 13crmo4-5 Pressure Ratings Table

Properties (MPa) Temperatures
450℃ 460℃ 470℃ 480℃ 490℃ 500℃ 510℃ 520℃ 530℃ 540℃ 550℃ 560℃ 570℃
Rz/10000 363 337 311 284 257 230 201 172 147 125 103 86 73
Rz/100000 284 251 220 190 163 137 116 94 77 61 49 40 33
Rz/200000 260 226 196 167 139 115 96 76 62 47 38 31 25
R1/10000 221 203 186 171 155 141 127 112 98 83 69 54 39
R1/100000 191 172 152 133 116 98 83 70 57 46 36 30 24

13crmo4-5 Slip On Flange Thermal Properties

Properties  Conditions
T (°C) Treatment
Thermal Expansion (10-6/ºC) 17.5 0-100 more  
Thermal Conductivity (W/m-K) 16.2 100 more  
Specific Heat (J/kg-K) 500 0-100   

13crmo4-5 Blind Flange Electric Properties

Properties  Conditions
T (°C) Treatment
Electric Resistivity (10-9W-m) 690 25  

En 10216-2 13crmo4-5 Slip On Flanges Dimensions

En 10216-2 13crmo4-5 Slip On Flanges Dimensions


NPS O.D. of Flange Flanges Thickness Diameter of RF Diameter of Hub at Base Lengtd Tdru Hub Bore or Diameter Dia. of Hub at Bevel Radius of Fillet Deptd of Socket
Welding (WN) Neck Slip-On (SORF) Threaded (NPT) Socket (SWRF) Lap Joint (Loose) Slip-on (SORF) Socket (SWRF) Lap Joint (Loose)
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2

Weight Formula Of Ally Steel 13CRMO4-5 Flange

Nominal Pipe Sizes (NPS) Slip On (SORF) Threaded (NPT) Socket Weld (SWRF) Lap Joint (Loose) Blind (BLRF) Weld Neck (WRNR)
½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
3 3 3 3 4 4
2 5 5 5 5 5 6
8 8 8 8 7 10
3 9 9 9 9 9 11.5
11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268

13crmo4-5 Material Thickness Calculation

13CRMO4-5 Flanges Wall Thickness
NPS (Normal Pipe Sizes) Outside Daimeter (O.D.) Schedule 10 Schedule 20 Schedule 30 STD Wall Schedule 40 Schedule 60 EXT Hvy Schedule 80 Schedule 100 Schedule 120 Schedule 140 Schedule 160 XX Hvy
½ 0.84 0.083 ... ... 0.109 0.109 ... 0.147 0.147 ... ... ... 0.188 0.294
¾ 1.05 0.083 ... ... 0.113 0.113 ... 0.154 0.154 ... ... ... 0.219 0.308
1 1.315 0.109 ... ... 0.133 0.133 ... 0.179 0.179 ... ... ... 0.25 0.358
1 ¼ 1.66 0.109 ... ... 0.14 0.14 ... 0.191 0.191 ... ... ... 0.25 0.382
1 ½ 1.9 0.109 ... ... 0.145 0.145 ... 0.2 0.2 ... ... ... 0.281 0.4
2 2.375 0.109 ... ... 0.154 0.154 ... 0.218 0.218 ... ... ... 0.344 0.436
2 ½ 2.875 0.12 ... ... 0.203 0.203 ... 0.276 0.276 ... ... ... 0.375 0.552
3 3.5 0.12 ... ... 0.216 0.216 ... 0.3 0.3 ... ... ... 0.438 0.6
3 ½ 4 0.12 ... ... 0.226 0.226 ... 0.318 0.318 ... ... ... ... 0.636
4 4.5 0.12 ... ... 0.237 0.237 ... 0.337 0.337 ... 0.438 ... 0.531 0.674
5 5.563 0.134 ... ... 0.258 0.258 ... 0.375 0.375 ... 0.5 ... 0.625 0.75
6 6.625 0.134 ... ... 0.28 0.28 ... 0.432 0.432 ... 0.562 ... 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 ...
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 ...
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 ...
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 ...
22 22 0.25 ... ... 0.375 ... ... 0.5 ... ... .... .... .... ....
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 ....
26 26 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
30 30 0.312 0.5 0.625 0.375 .... .... 0.5 .... .... .... .... .... ....
36 36 0.312 0.5 0.625 0.375 0.75 .... 0.5 .... .... .... .... .... ....
40 40 .... .... .... 0.375 .... .... 0.5 .... .... .... .... .... ....
42 42 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..
48 48 …….. …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..

Other properties associated with the chrome moly steel 13CRMO4-5 socket weld flange include its good weldability, good cold as well as good hot forming properties.As a 13CRMO4-5 Carbon Steel Pipe Flange manufacturer, we note that this particular steel grade is characterised by a good weldable properties. Which is why steel grades of this series such as 4140 chrome moly 13CRMO4-5 steel lap joint flanges can be welded by means of the usual or conventional welding techniques.


Manufacting High-Class Types Of 13CRMO4-5 Flange

Low Alloy Steel 13crmo4-5 Slip On Flange

Low Alloy Steel 13crmo4-5 Slip On Flange

High Alloy Steel 13crmo4-5 Socket Weld Flange

High Alloy Steel 13crmo4-5 Socket Weld Flange

High Alloy Steel 13crmo4-5 Socket Weld Flange

High Alloy Steel 13crmo4-5 Long Weld Neck Flange

4130 Alloy Steel 13crmo4-5 Threaded Flange

4130 Alloy Steel 13crmo4-5 Threaded Flange

4135 Alloy Steel 13crmo4-5 Forged Flange

4135 Alloy Steel 13crmo4-5 Forged Flange

4137 Alloy Steel 13crmo4-5 Plate Flange

4137 Alloy Steel 13crmo4-5 Plate Flange

4142 Alloy Steel 13crmo4-5 Reducing Flange

4142 Alloy Steel 13crmo4-5 Reducing Flange

4150 Alloy Steel 13crmo4-5 Orifice Flange

4150 Alloy Steel 13crmo4-5 Orifice Flanges

4140 Low Alloy Steel 13crmo4-5 Puddle Flange

4140 Low Alloy Steel 13crmo4-5 Puddle Flanges

4145 Alloy Steel 13crmo4-5 Flat Flange

4145 Alloy Steel 13crmo4-5 Flat Flanges

Chromium Alloy Steel 13crmo4-5 Anchor Flange

Chromium Alloy Steel 13crmo4-5 Anchor Flanges

Cast Alloy Steel 13crmo4-5 Spacer Blind Flange

Cast Alloy Steel 13crmo4-5 Spacer Blind Flange


Recently Supplied To Following Locations:

13CRMO4-5 Flanges Chile, Italy, Iran, Singapore
13CRMO4-5 Blind Flanges Norway, Malaysia, United Arab Emirates (UAE), Turkey
13CRMO4-5 Weld Neck Flanges Indonesia, Belgium, Dammam -KSA, Philippines.
High Alloy Steel 13crmo4-5 Long Weld Neck Flanges Malaysia, Philippines, Canada, Singapore
Alloy Steel 13crmo4-5 Plate Flanges UK, Mexico, Egypt, Spain
4135 Alloy Steel 13crmo4-5 Forged Flanges Bahrain, South Africa, Singapore
13crmo4-5 Reducing Flanges Thailand, France, Europe, Qatar
4150 Alloy Steel 13crmo4-5 Orifice Flanges Czechia, Malaysia, Germany, Thailand
Chromium Alloy Steel 13crmo4-5 Anchor Flanges Sweden, China, Colombia, Malaysia
Low Alloy Steel 13crmo4-5 Puddle Flanges Netherlands, Russia, Dubai, Malaysia
Alloy Steel 13crmo4-5 Flat Flanges Saudi Arabia (KSA), Kuwait, South Africa, Brazil
Alloy Steel 13crmo4-5 Orifice Flanges Australia, Philippines, Nigeria, UK
High Alloy Steel 13crmo4-5 Socket Weld Flanges Hong Kong, Oman, Malaysia, UAE


About Company

We Are EIL And IBR Approved Manufacturer, Exporter, Stockholder, Traders, Dealer, Importer, Wholesaler, Distributor, Supplier of Industrial Pipe Fittings & Flanges, Forgings And Fasteners In Mumbai, India.


Our Official Address

153 / 154, “A” Wing, Siddheshdeep Tower,
Shop No. A-28, Ground Floor, P.B. Marg, Near Navjivan Society,
Mumbai– 400 008 (India).


Telephone & Fax No.

Tel Number : +91 - 22 - 6743 7342,
+91 - 22 - 6659 5135
Fax Number : +91 - 22 - 66595135

Contact our sales representatives in the following countries:
Poland | Malaysia | Singapore | UAE | USA | UK | Philippines | Iran | Italy